Unable to connect network

Not able to connect to a network,
i tried reseting all still having same problem.
please help.
regards

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Did the iPod every connect to this network?
Does the iPod connect to other networks?
Do other devices connect to this network?
Any error messages when you try to connect?

Similar Messages

My ipad including my iphone says "unable to connect network" whenever i connect it to wifi. How could this be?

Help anyone pls!!! My ipad including my iphone says " unable to connect network" whenever i connect it to wifi. How could this be?

Try Settings > General > Reset > Reset Network Settings
Then try again.

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

Unable to connect, 'network connection was reset.'

I have been unable to connect with the itunes store despite an extreme effort and multiple changes/attempts. I do have sonic wall firewall running McAfee anti virus. Everytime I open itunes I get the message: "itunes could not connect to the itunes store. The network connection was reset." My network connection is active and has been checked. I could really use some direction or advice as to how to solve this frustrating problem.
Thanks.

I am getting the same message, HELP! I have done everything to try to troubleshoot myself. My network connection is fine. I have downloaded the latest version of Itunes, flushed my dns, added apple sites to trusted sites, check my norton antivirus to make sure Itunes was ok with my firewall. I really need help. Thank you.

Unable to connect network stream

Hi,
i have a PXI-8196 as the RT System, and then my host and I'm trying to create a network stream between them.
When I run the RT System up, then run first the RT vi and then the Host vi and connect, there is no problem. The problem comes when I stop the vi's: if then I run again both vi's, the host vi is unable to connect again with the RT vi, as the system returns me the error -314004 when the host vi tries to create the endpoint... If I then shut the PXI system down and run it up again, it works...
Thanks in advance for the answer!

"It's all in the wrist" (V White). You need to decide who is "hosting" the Network Stream (in my case, it's the PXI), and which direction you are streaming (I actually have 4 streams, one PC -> PXI and three PXI -> PC). The key step is that you need to be sure that the PXI (the system running the Network Stream "engine") is running first.
Note that the error you saw, -314004, (probably) means that the PXI is not, in fact, "listening" for the Host to make a connection. If you suspect there's a "race" condition (you accidently start the Host first), you can simply say "Oh, that error means I need to wait 10 seconds for the PXI to get ready, then try again".
If all else fails, you can get the PXI to restart itself, ensuring a clean system.

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Unable to connect to home wireless network with my iPod touch

I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
Thank you for all suggestions and your help.

I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

HT1695 I can't connect to my wifi network not even when it has no security on I get "unable to connect to network "netgear" anyone have this issue and maybe know how to fix it?

Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

IPod Touch unable to connect to wireless network.

I just got an iPod Touch 4 for my birthday (w00t), however I cannot seem to get it to connect to my wireless router. Everytime I try, it says Unable to connect to network. I reset the routers password, but it didn't do anything. I saw in other threads people said to switch ti WPA security, but mine is already set as WPA Personal. I'm not sure what to do! Please help!

NO I did not and thank you very much for the advice. My problem was stated incorrectly in that while I am able to connect to the wireless from that point on I am unable to connect to the internet. I will check the article referred to.

Suddenly unable to connect to wireless network...exhausted all fixes

I’ve got an odd problem with my two-week old MacBook Pro and its connection to my wireless network. I’ve done what I think is pretty exhaustive troubleshooting, but remain baffled. Here’s the story.
This morning I connected to my wireless network (DSL 2WIRE modem/router) with no problem. This afternoon I returned and Airport refused to connect, giving me the error message, “Airport is unable to connect to the wireless network…” The network shows up as being available, but when I attempt to connect, it wont. (I didn’t make any changes or install any programs this morning).
Here’s what I’ve done:
[1] Restarted the router
[2] Repaired permissions
[3] Deleted the network’s entry in Keychain Access
[4] Re-entered my WEP code (assuring it is in correctly; I’ve tried both with the “$” and without)
[5] Used interface robustness and without.
[6] Attempted to join the network from the System Preferences>Network.Airport route.
[7] Created a new account and tried connecting.
Other tidbits of information:
[1] Another MacBook in the house connects to the network with no problem.
[2] My MacBook can connect to another (unsecured) network that I can “see” in my house.
So, it would seem my Airport card is working okay.
Any ideas??

Some more info (in case anyone is listening...)
I tried turning off the WEP code and could connect. (Since I share files on my home network, this isn't a "solution").
I also tried Resetting the MacBook Pro System Management Controller (SMC)(See: http://docs.info.apple.com/article.html?artnum=303319). I did this (I think -- there wasn't any indication that the reset "took"), but alas -- no luck.
I gave Apple Care a call, but the support guy, while courteous and all, didn't have anything to offer other than telling me to take it in to an Apple Store for a repair (clearly it isn't a hardware issue).
Heeellllppppp!

MacBook (10.4.11) is unable to connect to wifi networks

After updating with 10.4.11 (and the associated 2008-01 Airport update) a few months ago, my Intel MacBook has been unable to connect to my WPA2 network.
It will see my network name in the Airport drop-down menu, but fail to actually connect. The icon appears as if the notebook is rapidly connecting and disconnecting -- switching from five bars of signal to none and back again every few seconds. During this time, my MacBook never reports getting a connection, and all other devices on the network experience severe interference. I am able to connect to most, but not all, unsecured networks.
System Profiler reports my wireless card as AirPort Extreme (0x168C, 0x86), Firmware Version: 1.3.5 .
My router is a D-Link DGL-4300 with the most recent firmware. I am running an 802.11g network at 2.437ghz.
I've tried the following already, unfortunately without success:
. Switching to WPA from WPA2
. Removing all the preferred networks from my System Preferences and adding them back in again.
. Removing all the network info in my keychain and reconnecting to the network from scratch
. Switching the router to channel 11 (away from 6)
. Turning Interference Robustness on and off
. Manually specifying IP and DNS in my network settings, rather than DHCP
. Removing all other wireless devices from the network
Looking elsewhere on the net I find that a few other people seem to have this problem, and so far the only solutions I've seen are "roll back to 10.4.9" and "disable security on your home network," both of which are obviously untenable for security reasons.
The one (and only) WPA-secured router I am able to connect to is the Airport at my local Genius Bar, so they're unable to help me.
Has anyone else seen this, or have any ideas?
Thanks.

Well, I downloaded Pacifist and the 10.4.11 Combo Update. Pacifist verified the AppleAirPort and AppleAirPort2 .kexts on my drive as matching the ones in the package, but I forcibly reinstalled them anyway and rebooted. Still no luck -- now the network is back to the four-bars-no-bars death loop without even popping up the error dialog.
Luckily however Pacifist turned out to be the solution to the problem. A Google search on "Apple broke Airport" eventually led me to this thread with detailed instructions on rolling back to the previous version of the Airport driver, before the 2008-01 update: http://www.tuaw.com/2008/03/28/airport-extreme-update-2008-001-for-tiger/#c11509 504
I'll paraphrase it here for anyone else who has this problem:
Download the Airport Extreme client software version 2007-004
from http://tinyurl.com/yw3dnu.
Download and install Pacifist from www.charlessoft.com.
Delete /system/library/extensions/io80211family.kext
In Pacifist, open AirportExtremeUpdate2007004.dmg
and expand the sub folders until you can see the io80211family.kext
extract and direct it to extract the file to the
/system/library/extensions/ folder
restart
So now my Airport works again, though without whatever security they put in with 2008-01, I guess.
I suppose I'll have to embargo future OS updates until this gets straightened out, or else re-rollback the io80211family.kext after each one. I sure would like to talk to whoever wrote this update at Apple!
Thanks for your time, BD.

HP Deskjet 3050 - Unable to connect to WPA secured wireless network

Hello,
My first post here so please excuse any faux pas on my part. I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since. I'd be really grateful if someone could possibly advise on how I can resolve this.
I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue. I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer. If I disable the security, the printer connects fine.
I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled. The router is broadcasting on 802.11G/N mixed mode.
I'm installing the software supplied on the setup CD on a Windows XP SP3 system. I have confirmed that the network the PC and printer are connected to are the same.
A question as well, if I may: I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010. The release notes indicate improved networking, but don't elaborate beyond this. Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
Finally, just a note that I'm partially sighted and am using a screen reader on all systems. I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
Thanks in advance for your help, which I really will appreciated.
Have a pleasant day,
All the best for now and take care,
Hussein.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
This question was solved.
View Solution.

HI,
firstly, apologies for the delay getting back to you. Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved. It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
To resolve the problem, I did the following:
1. Disable all security options for the network, so it's just an open network.
2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
3. Locate the printer's IP address. I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
5. Under the advanced options, configure the settings for the network, including security protocol and passphrase. Remember to enter the SSID of the network exactly as configured on the router.
6. Apply the settings and log out of the printer's control panel.
7. Log back into the router's control panel and re-apply the security options. Be sure that they match those match those entered for the printer.
Hopefully this will be of use to others in the same position.
Thanks again for your time.
Best,
H.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however if I use my laptop in the same physical locationand using similar procedures I am able to conect.?

What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

Unable to connect network

Similar Messages

Maybe you are looking for