Unable to connect Project Professional 2010 to Project online (PWA Cloud)..

Greetings!
we are getting following error when connecting a Project Professional 2010 - local desktop thick client to a PWA (Project online) cloud environment. I have an admin access to the system..
<detail><errinfo><general><class name="ActiveCacheUnsupportedProjectProfessionalVersion"><error id="12015" name="ActiveCacheUnsupportedProjectProfessionalVersion"
uid="7babc462-4923-e411-890f-00155dc21b2c" version="14.0.4751.1000"/></class></general></errinfo></detail>
Can someone please help? Unfortunately, I am new to the Project online setup..
Best Regards...
stct

Hello,
Unfortunately Project Professional 2010 will not connect to Project Online / Project Server 2013. You will need to use Project Professional 2013 to connect to Project Online / Project Server 2013. Project Pro 2010 will only connect to Project Server 2010.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Similar Messages

Unable to make master project containing sub-projects using Project Online PWA (Cloud)

Can anybody help? I tried a lot of navigations in Project Online PWA (not project server) but still unable to make master project containing sub-projects using Project Online PWA (Cloud)

Hi John,
It isn't possible to do this in the Project Web App either in Project Online or Project Server - you will need to use Project Professional 2013 and connect to your Project Online instance, or the subscription version, Project Pro for Office 365.
Best regards,
Brian Smith
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Unable to connect Project Professional (dekstop) 2010 to Project online cloud enviornment

Greetings!
I am trying to connect Project professional (2010) local desktop version to the
Microsoft Project Online (Cloud) PWA hosted by Microsoft -
so that we can edit a cloud project timeline through the desktop thick client (Pro). I think, cloud is a great interface, however some of the scheduling functionalities are better in MS Project Professional (thick client).
Unfortunately, I got the following error message:
<detail><errinfo><general><class name="ActiveCacheUnsupportedProjectProfessionalVersion"><error id="12015" name="ActiveCacheUnsupportedProjectProfessionalVersion"
uid="7babc462-4923-e411-890f-00155dc21b2c" version="14.0.4751.1000"/></class></general></errinfo></detail>
Can someone please help on this? I was told this may not be a version compatibility issue..
Best Regards..
stct

Duplicate question, please see:
http://social.technet.microsoft.com/Forums/projectserver/en-US/825d461e-1940-4de9-8d87-d4fb437c2ef1/unable-to-connect-project-professional-2010-to-project-online-pwa-cloud?forum=projectonline
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project Online (PWA) Task Notes not visible

Hi,
Im using Microsoft Project 2013 Pro to manage projects.
Now i started to let my engineers use MS Project Online (Office365) to work on their tasks through PWA.
I have several projects created with tasks and on every task there is a Note with the description of the work that needs to be done.
My engineers dont use the Full version of MS Project 2013 and cant see these notes within the Web portal of Project Online (PWA).
Where can i find these notes online?
I tried to change the view but cant find any option to add the notes.
Opening a task doesnt give me the notes either.

Hello,
This is available in both Project Online and Project Server 2013 - this functionality is the same.
To update the PWA Project view, login as a user that has admin access to PWA and navigate to PWA Settings then Manage Views. Choose the view/s where you wish users to see the task notes and click it, this will take you to the view settings. You will see
a list of fields available. You will see "Notes" available in the list of fields.
On the Tasks page (accessible from the PWA Homepage - Tasks link on the quick launch or the Tasks tile), click the task name and scroll down the page, the notes will be near the bottom.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Project Manager unable to edit project in PWA

I have a project manager(PMa) who can not edit "Some" projects in the PWA. PMb has had no issues editing projects.
PMa is a new employee and the account was created in January. PMb has been a PM since we first implemented Prj Server 2010.
PMa and PMb have the same permissions set:
Available Groups: IT Manager, Porfolio Managers, Project Managers, Resource Managers and team members.
The categories are "My Organization"
None of the templates have "Deny" set for any of the persmissions
We have 2 servers, a production server and a test server.
Production Version: 14.0.6209.1000
Test Version (Upgraded this morning to SP2): 14.0.7015.1000
PMa is having the same issues on both servers, and using different computers.
I am suspecting account corruption, is there a way to verify? If it is corrupted, how to fix.
flustrated

Hi Darcy,
When you say that PMa cannot edit some projects in PWA:
does that mean that he can edit the project in MS Project Pro?
what is the behavior in PWA? Any error message? The "Edit" button is greyed out?
Have you ask PMa to connect from another machine? Also try to run a delegation session for PMa and check if you can edit the projects from this delegation session.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Unable to connect to Exchange 2010 Management console after - Exchange 2010 SP3 Rollup 7

We have been having issue with our Exchange Server 2010's Transport Service failing due to a database corruption. I was hoping that maybe applying the Roll-up 7 for Exchange might fix this issue, however after applying the patch we are unable to start the
MSExchangeMailboxAssistants "Error 1053: The service did not respond to the start or control request in a timely fashion."
Then I notice that we were unable to connect to the Management Console or through PowerShell.
Event 1000, Application Error
Faulting application name: MSExchangeMailboxAssistants.exe, version: 14.3.210.2, time stamp: 0x53e2bf34
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x5315a05a
Exception code: 0xe0434f4d
Fault offset: 0x000000000000940d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
PowerShell error:
Exception calling "TryLoadExchangeTypes" with "2" argument(s): "Could not load file or assembly 'Microsoft.Exchange.Man
agement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name va
lidation failed. (Exception from HRESULT: 0x8013141A)"
At C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1:75 char:92
+ $typeLoadResult = [Microsoft.Exchange.Configuration.Tasks.TaskHelper]::TryLoadExchangeTypes <<<< ($ManagementPath, $t
ypeListToCheck)
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException

Hi,
Please try the following steps to narrow down the issue:
1. Uninstall and reinstall .NET package in Exchange server.
2. Under location C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG, took a copy of Machine.Config.default, renam it to Machine.config and copy it under this path again.
3. Do IIS reset by running iisreset from a Command Prompt window.
4. Reboot the server and verify whether the Exchange services are started.
Regards,
Winnie Liang
TechNet Community Support

Outlook client in different subnet unable to connect to Exchange 2010 CAS using Windows 2008 R2 NLB multicast mode

Hi all,
need urgent assistance on the following issue
this is my Exchange 2010 setup
2 x CAS/Hub servers with HP network teaming, and load balanced using Windows NLB multicast mode. There are 2 VIPs on the NLB, one for outlook anywhere, one for autodiscover
2 DNS records were created for the 2 VIPs
Clients use Outlook Anywhere (HTTPS) to connect to the CAS servers from external segment via a Palo Alto firewall, which also acts as a layer 3 router
static arp was set on the Palo Alto firewall, with both virtual MACs pointing to the primary virtual MAC used by the NLB.
Observations
1. within same segment - no issue accessing Exchange servers, even when one CAS node is offline
2. external segment (via firewall)
a. when both nodes are up
outlook client able to connect to Exchange CAS VIP on 443, but will disconnect after around 30 seconds. Client will retry and the pattern will repeat
Exchange CAS RPC logs shows client connections and disconnections to the outlook anywhere VIP address
Firewall logs shows allowed traffic from client to the VIPs
unable to complete profile creation
b. with only CAS2 (CAS1 stopped/deleted from NLB cluster)
no issues accessing Exchange servers, creating profiles etc
c. with only CAS1
same behaviour as (a)
reinstalled NLB, but doesn't resolve
deleted CAS1 from NLB cluster, and re-add. issue remain
Q1. is teaming supported? Teaming is currently set to automatic mode, instead of specified Fault Tolerant
Q2. are there additional settings we need to set or verify on the Palo Alto firewall, since the issue only happen to external segment? Thanks!

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

Project Online: project will not move to next workflow stage

Hi, another workflow question: I've created a workflow using the SPD 2013 for a Project Online PWA. When a project has gone through the portfolio analysis it should move to either the Selected or the Not selected workflow stage. The problem is that some
projects do and some don't:
("Naam van werkstroomfase" = Workflow Stage Name)
All projects were checked in when I committed the portfolio scenario.
Does anyone else have the same experience and how did you solve it?
Kind regards,
Hester

Hello All:
I have an issue open with Premier Support and through hours of testing and tweaking, I've summarized as follows:
The 'stalls' always happen when any of the following code is added to the SPD2013 workflow. The common thread is Project Custom Fields and the code has been inserted at various points to prove the failure.
When a SharePoint Designer 2013 workflow attempts to access a large number (more than 10?) of Project Custom fields from the Start a process command, the workflow stalls. In this case we are adding custom field values to the
email body for Gate Approvers.
When accessing a large number (12 or more?) of custom fields and writing those values out to a SharePoint List as a baseline 'snapshot' of custom fields, the workflow stalls.
When attempting to update a Project Custom field value, the workflow stalled. (i.e. Set Project Status = ‘Approved’ at Gate 3)
We have pulled that code (and function) from this release and begin user training tomorrow.

MS Project Professional 2010 - Unable to open Project Plan from the Server.

Dear Folks,
Since morning we have been facing an issue with MS Project Professional 2010. When we try to open project plan, it takes time and then show nothing on the screen, project gets checked out to you as well but nothing comes on MS Project Professional Screen.
Strange thing, when busy mouse cursor gets released MS Project Professional show "Disconnected from the Server" message with white icon instead of globe one at the bottom of MS Project Professional and disappear after few seconds.
We are able to open small plans but the plans having 4000 lines is not able to open, Project Professional show busy status when we give it a try.
Everything seems fine to me .. Project Server connection .. queue jobs .. no issues.
What could be the possible problem and how to resolve this issue?
Many thanks in advance.
Best Regards

Hi Mohsin,
Is it happening for all users or just some of them? Is it happening for all projects? Have you tried on a different machine?
First I'd suggest to try accessing the project plan through PWA to identify wheither it is a network issue or an application issue.
Then check the Project Pro account to ensure that the connection settings to Project Server are correct. You could also try to remove the Project Server account in Project Pro and create it again.
Finally, ensure that the PWA URL is added to IE trusted sites.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Project Professional 2010 and pwa hangs when opening a linked project from PWA on Project Server 2010

When I open a linked project in Project Professional 2010 from PWA, Project Professional 2010 hangs with the "Links Between Projects ..." dialog box open. Unable to move or close the dialog box. Unable to move or close Project Professional
2010. The PWA tab on internet explorere is frozen and unable to access although other tabs in IE are accessible. End up having to reboot to close down project or force the process to end. I suspect a hidden dialog box is the culprit maybe
the scheduling conflict dialog box but am unable to access or switch and cannot confirm that there is another dialog box.
Has anybody else experienced this problem?
Thanks,
Julie

I have seen it hang when trying to open a project schedule even with no external links.
Project 2013 Pro, Link to schedule is on a PWA on a Project 2007 server.
If Project 2013 is open before clicking on the link, there is a long delay and the project schedule opens up in the web tab where the link was selected. If Project 2013 is not open, it just hangs and has to be shut down via the task manager.
No idea why. I can create a link to the shared volume and that works OK. But if I actually try to open MS Project by clicking on the link to a .mpp file it never opens in MS Project.
Mike

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Project Professional 2010 Not Publishing to Project Server 2010

I am having trouble publishing a project from Project Professional 2010 to the Project Server 2010 (PWA). What I am trying to publish is a master project which is contains many enterprise projects as subprojects. When I press publish, it prompts me
to save and if I click yes then it goes through and saves all the subporjects and then just stops there and doesn't publish the changes to the master project. If I press publish and click no to the save prompt then it gives me the status "sychronizing
data to server" for around 15 seconds and then just does nothing after the sychonization finishes.
It usually should be giving a "publishing job done 0%" or "publishing job completed" when it publishes, but it gives nothing like that. I also check the project through the PWA and it has not updated yet, but when I open it for editing in the client it has
everything updated and up to date, meaning that the save is working properly and just not the publishing.
All my subprojects are able to publish correctly, it's just this master project that is not working.
Does anyone know why this is happening? Is the publishing process timing out for some reason? Or is it something else?
Please help.
EDIT: The progress notification at the bottom of Project Professional just stops at "save completed sucessfully" whenever I try to publish

To check the queue, navigate to Server Settings > Manage Queue and view the jobs that are present. If there is an error when publishing you should see it in the queue.
Alex Burton
www.epmsource.com |
Twitter
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Project professional 2013 can not connect to Project Online behind proxy

Hi,
I had problem when running application ms project professional 2013 connect to project online behind proxy,
but we can access url PWA site in browser.
but when we connect to pass through internet we can connect project professional 2013 to project online.
i get article http://technet.microsoft.com/library/hh373144.aspx to open port 443, but we already
open port 443.
anybody know how to troubleshoot this problem? or other port to open beside port 443.
thansk for advice.
regards
rully

Hi Ruly,
Are you still having an issue? Could you share the error details, when you try to connect the MS Project to project online behind proxy?
Cheers, Badal

Dropdowns and many buttons disabled in PWA 2007 after Microsoft Project Professional 2010 has been installed

Hi Team,
I have Microsoft Project professional 2007 installed and also using PWA for 2007.
I recently installed Microsoft Project Professional 2010, and since the time i installed 2010 all the button in PWA 2007 have been disabled.
1. I could not select a project from "Project Center"
2. I could not select resources from "Manage Resources"
3. I could not select dropdowns in the project properties even if the project is selected.
ALl the other team members are able to use both without any issues.
I also uninstalled IE8 browser and re-installed, that didn't help.
I could use PWA normally after 2010 is uninstalled.
Please suggest a solution for this.

Try running a repair on Project Professional 2007. You always have to do this after installing a newer version of project. Always run a repair on the previous version. What's happening is that PWA is not seeing 2007 on your machine because 2010 overwrote
some of the shared objects.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Activating Project Professional 2010 after a crash

hi there:-
I am looking to reactivate/reinstall Project Professional 2010 after a crash. I have a product activation code having downloaded the software online (no disks). What do I need to do?
Much obliged
Tom

Tom,
It should be pretty straightforward. I assume you saved a copy of the .img file you downloaded to a location that was safe from your crash. Without that you're probably out of luck.
Just re-install from the .img file and when the installation gets to the part for activation, go ahead and activate it.
Hope this helps.
John

Unable to connect Project Professional 2010 to Project online (PWA Cloud)..

Similar Messages

Maybe you are looking for