Unable to connect Satellite C55-A to the WLAN

Hi I am unable to connect to my WLAN.
My router was zapped in the latest storms and talktalk sent me a replacement. Whilst setting it up I decided to change the ssid and the psk.
Every other device in our household (laptop, desktop and tablets) will connect to the new router but not my Satellite C55A. It can see the new ssid but when I enter the psk it gives the message "cannot connect to this network". I have win 8.1 wlan adapter is atheros ar956x, driver is 10.0.0.263.
Any suggestions?

It is really strange. Usually there should not be some problem. When the WLAN is detected all you must do is to put right password.
Have you checked all WLAN settings on your machine?
Is there some possibility to test it with other WLAN by your friend, just to see if the problem is the same?

Similar Messages

My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?

My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

HT204051 I'm unable to connect my iphone 5s to the Dlink router. I tried all the apple support suggestions. But doesn't work. Please let me know.

I'm unable to connect my iphone 5s to the Dlink router. I tried all the apple support suggestions. But doesn't work. Please let me know.

I'm having this problem now with my 2 weeks old iPhone 6+. in the beginning everything going great and managed to connect every wifi around me. Then suddenly 1 week ago, All the wifi from my office, home, hotel and coffee house saying either incorrect password or can't join the wifi. But when i switch on my hotspot from my iPhone 5 it can be connect. i also try with my friend iPhone hotspot. So is it because of hardware problem or software problem. And i just restore my iPhone6+ and still can't connect to wifi and manage to join hotspot (also wifi right?) regret as all my downloaded stuff vanish and now can't download back using wifi.....
Thanks for assisting

How do I connect my i phone 5s to my home wifi? keeps saying unable to connect after I put in the password

how do I connect my i phone 5s to my home wifi? keeps saying unable to connect

Is anyone else able to use the internet around you, say a computer or another device? If they are unable it might be your modem. You can always try to reset your modem. Simply unplug it and plug it back in,

Unable to connect to Oracle 8i using the JDBC - OCI8

I am unable to connect to the to the Oracle 8i database using
JDBC 8.1.5. er. Each time I try I get the message:
"java.lang.UnsatisfiedLinkError: no ocijdbc8 in
java.library.path"
When I try to establich a "connection" using the connection
manager with JDeveloper 2.0 I get the message:
"No ocijdbc8 in shared library path"
What's the problem? Is it that I do not have the appropriate
driver? It is unlikely because the thin driver works...
null

I dealt with this problem. For some reason OCI drivers
installation is not included in typiclal Jdev 2.0 instalation.
(bug?). In your instalation kit find Oracle 8i instalation disk,
and run the installer on the client machine (i.e. the same
machine where Jdev is installed where you were not able to
connect with OCI-8). Choose client installation and choose
custom installation. Than in the product list choose JDBC
drivers. Make sure OCI drivers are included. Install it. Now you
can find file ocijdbc8.dll in your ORACLE_HOME/bin directory.
Now you should be able to connect using OCI-8.
Best of luck,
Michael Gantman
Preslav Nakov (guest) wrote:
: I am unable to connect to the to the Oracle 8i database using
: JDBC 8.1.5. er. Each time I try I get the message:
: "java.lang.UnsatisfiedLinkError: no ocijdbc8 in
: java.library.path"
: When I try to establich a "connection" using the connection
: manager with JDeveloper 2.0 I get the message:
: "No ocijdbc8 in shared library path"
: What's the problem? Is it that I do not have the appropriate
: driver? It is unlikely because the thin driver works...
null

I can not connect to iswifter, some times it is connected and some time it shows " UNABLE TO CONNECT TO SERVER PLEASE CHECK THE INTERNET" but my internet connection is good and other wbe site i can open without any problem. Please guide me..

I can not connect to iswifter, some times it is connected and some time it is not connected and getting message " UNABLE TO CONNECT TO SERVER , CHECK YOUR INTERNET" but my internet connection is ok and I can open other web site with out any problem. Please guide me how to solve this issue.

Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
 Cheers, Tom

Unable to connect new ipod touch to the internet at home using wifi

Hi i've just brought ipod to touch to replace my broken classic...I AM UNABLE TO CONNECT TO WIFI!! help please!!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Unable to connect to Oracle server on the first attempt.

Hi,
I've downloaded the Oracle Data Provider for .NET and I've installed it on my computer. Only this software, and only the client tools and there are no more Oracle products intalled on this computer.
I've developed a test application in order to take a look to these libraries but I am very dissapointed with the behaviour of the OracleConnection class, and that is because when I call the open() method for the first time it is impossible to open the connection, the application never returns from this call. If I close the application and I execute it again it takes 0.0 seconds to open the connection and If I wait about 5 or 10 minutes without querying the database, next time I try to connect it fails again showing the same behaviour that it showed in the first connection attempt.
I really don't know if I am missing some software installation or any configuration, I've tried this on two computers and the result is the same. I've looked for an answer in this forum but the only I have fount takes not sense, it says that it deppends of the user used to connect to the database.
I have to add that the database is not in the same network of the computer.
Thanks in advance,Regards.
Edited by: user7134478 on 08-jul-2010 9:50

Thank you for your answer Alex.
I've tried both options but is hasn't solved my problem :-(
I think that I didn't explain it well, the first connection attempt doesn't take 5 minutes it never connects to the database.
That's what I am doing.
1.-Launch the C# app using the OracleConnection.Open() method
2.-The application freezes after call the Open() method (no timeout response...)
3.-Stop the application execution
4.-Launch the application again and it takes 2 seconds the response from the Open() method
5.-I do some querys and everything works fine
6.-Wait for 5-10 minutes without any kind of access to the database.
7.-Query the database after these minutes and after call the method Open() what I described in point 2. happens again , the application freezes.
I've tried this under Windows XP, Windows vista, in different computers and the behaviour is always the same.
The curious thing is that I've installed the SQL Developer and everything woks fine, no connection timeouts, the first connection takes only a couple of seconds.
I really don't know what's happening here and It should work fine. It is very dissapointing.

I have been unable to connect to my printer since the Dec 22 OS security update

Unable to connect to printer after Security update. Spent an hour with Apple Support trying to solve issue. Any similar experiences?
iOS Yosemite 10.10.1
OS X NTP Security update 1.0 December 22

What kind of printer is it? Have you tried deleting and re-adding it? Is there anything in /Utilities/Console in "All Messages" or /var/log/cups/error_log when you try to print?

TS1398 On holiday in Spain, my phone wont connect to wi-fi at my friends apartement but connects to some wi-fi locations in the city. The rest it tells me that "Unable to connect" even though i know the password is correct and my ipad connects.

On holiday in Spain, my phone wont connect to wi-fi at my friends apartment but connects to some wi-fi locations in the city. The rest tells me that " Unable to join the network" even though i know the password is correct and my ipad is connected.
I have tried resetting network connections and switching on/off wi-fi, and also reset using home and top button, still nothing.

Try going to the Wifi settings and clicking the little arrow next to your network, and click "forget this network" then try re-connecting. If that doesn't work, try going to settings-general-reset and clicking reset network settings. Also, make sure you have your network password correct if there is one.

Unable to connect to Deployment share via the 2012 Update 1 workbench.

Hi Everyone,
This is a tricky one, I've been scratching my head for a few days now. I have a MDT deployment share, which lives on a server, for argument sake, lets call it: MDT-01. Via the Servers MDT Workbench, I can connect to the deployment share just fine, from
any PC, other than my main PC (which is running Windows 8.1), I can connect to the deployment share just fine. If I load the MDT Workbench on my main PC, it just has a deployment share folder with a red cross on it. If I attempt to remove it, it crashes the
MMC, if I try and open the same deployment share it crashes the MMC. If I give the Deployment Share a different share name, it errors and says I can't use an existing deployment share folder.
I used to be able to connect to the share just fine, but since the last couple of days I've not been able to connect.
Further investigation with PowerShell reveals that the console thinks it has a persistent drive, DS001, but the path is blank, as in ''.
Restore-MDTPersistentDrive -verboseVERBOSE: Restoring drive 'DS001' with path ''WARNING: Unable to restore drive DS001.
If I try to remove the Persistent drive, it errors, and if I try to add any new drive to either the same deployment share, or an alternative, it fails.
I can use the New-PSDrive and Remove-PSDrive Powershell commands to create/remove a replicated drive, but that doesn't actually change the Path value in the Get/Restore-MDTPersistantDrive, as they seem to be separate, even though I think they should
be linked.
The Internet has been no help, so I'm asking the Microsoft crew to be helpful, and not just do the usual "This is posted in the wrong place, this question will now be closed... etc, etc!" This is an MDT question, not a Powershell question, I just
need anyone who has indepth MDT knowledge to look at this.
To make clear, this is not a question about a client connecting to the deployment share, that all works fine, and I can update the deployment share fine from any other workbench.
I cannot connect to my deployment share, from my local MMC MDT workbench, as it thinks it already has one, but with a blank path. I've uninstalled, and reinstalled both the MDT, and ADK components on my Local PC, but I still cannot connect to the Share.
My question is this: The files/registry that stores this DS001 path setting is clearly local to my PC, but where is it, I've search the reg, and I've check files, but to no avail, I'm likely to rebuild my PC because of this, but I'd rather not if I can help
it.
Any Ideas people?
P.s. Sorry if this post seems rude, I do appreciate the help, I just don't have time for being messed about, as we're migrating our XP system to 7, and with less than 60 days remaininf, I could do without this... Thanks for understanding. :D

Persistent drives are just a easy way for the MDT console to keep track of the Deployment Shares you like the most (think of it as "pinning" Deployment Shares to the console).
The list of persisted Deployment Shares are per user and stored in the file:
"%AppData%\Microsoft\Microsoft Deployment Toolkit\User.Config"
Mine looks like:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<userSettings>
<MDTProvider>
<setting name="Drive1Name" serializeAs="String">
<value>DS001</value>
</setting>
<setting name="Drive1Path" serializeAs="String">
<value>C:\DeploymentShare</value>
</setting>
<setting name="Drive1Description" serializeAs="String">
<value>MDT Deployment Share</value>
</setting>
</MDTProvider>
</userSettings>
</configuration>
Make sure the Drive Path points to something valid, otherwise, I would delete (rename) the file and let MDT re-create the file.
I hope this answers your question.
Keith Garner - keithga.wordpress.com

When I open firefox, the web address ishows my chosen home page but the window shows "untitled" and I am unable to connect to any site to the internet.

I chose the New York Times site to be my home page and when I open Firefox this address appears in the web address panel. But in the tab box it says "untitled" and I don't connect to any web page. I have tried reloading firefox, nothing seems to work. How can I stop this?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Unable to connect to a computer in the local network

I've set up an older notebook as a server, connected via WiFi, will be called "server" in this text. Then I have my normal work notebook, called "notebook" in this text.
Both the server and the notebook are connected to the router. The server has additionally a no-ip.org domain.
server ip: 192.168.1.14, notebook ip: 192.168.1.15, router ip: 192.168.1.1
Now just after rebooting and after resetting the wifi connection, I can ping and ssh the server from the notebook.
After some time though something strange happens...
I can't connect to the server from my notebook, neither through the mDNS address nor through 192.168.1.14, all I get is "ssh: connect to host 192.168.1.14 port 22: No route to host".
But if I ssh to the server from my notebook via the no-ip.org domain, it works perfect.
I can then ping 192.168.1.1 from both the server and the notebook, but I can neither ping 192.168.1.15 from the server nor 192.168.1.14 from the notebook...
They lose each others ARP entries, too.
What might the reason for this strange behaviour be?
Where's the problem? SSH config? Server config? Router config?
What I tried until now:
- Letting the server regularly restart its network connection - it seems to help sometimes, but not "forever". Additionally it's a terrible solution.
- Letting the server regularly restart avahi-daemon: Oddly enough using that both servers have each others mDNS and MAC-Addresses all the time, but still aren't able to connect.
-Letting the server regularly ping the router: Well, that didn't help either. That just works anyway.
Last edited by zilti (2012-12-15 11:45:01)

The router is a Zyxel NBG-419N. I have access to logs, but I don't think they're too useful.
I'm using DHCP, but have MAC-to-IP-mappings.
ip addr:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:ed:b9:5b:aa:83 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.15/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::aed:b9ff:fe5b:aa83/64 scope link
valid_lft forever preferred_lft forever
ip route
default via 192.168.1.1 dev wlan0 metric 303
192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.15 metric 303

Unable to connect to multiple drives at the same time on Windows

It is not possible to connect to a second Drive on Windows. When you try to do this, an error occurs in the AD log and a general failure message is shown to the user.
See also the attached screenshot. On Mac OSX, it is possible to connect to multiple drives without errors.
Tested and reproducible with with
Adobe Drive 3.2 running on Windows 7 x64
Adobe Drive 3.2 running on Windows 2008 R2
How to reproduce
Connect to Server A, mounts correctly as Z:\
Connect to Server B, error
Error in the AD log
2012/04/23 12:00:32,343 [ConnectionHandler-Adobe Drive.exe-2796] ERROR MountService - osIntegration.mount() failed
com.adobe.drive.data.model.DriveException: the server with uuid elvis_server_192.168.72.87_8080 could not be mounted
    at com.adobe.drive.internal.biz.filesystem.mount.OperatingSystemIntegrationWin.mount(OperatingSystemIntegrationWin.java:109)
    at com.adobe.drive.internal.biz.filesystem.mount.MountService.internalMount(MountService.java:144)
    at com.adobe.drive.internal.biz.filesystem.mount.MountService.mount(MountService.java:102)
    at com.adobe.drive.ui.ncomm.handler.MountServerHandler.mountServer(MountServerHandler.java:274)
    at com.adobe.drive.ui.ncomm.handler.AddServerHandler.handle(AddServerHandler.java:136)
    at com.adobe.csi.internal.ncomm.InvokeHandler.handle(InvokeHandler.java:88)
    at com.adobe.csi.internal.ncomm.NCommDelegate.execute(NCommDelegate.java:107)
    at com.adobe.versioncue.internal.nativecomm.host.Host.execute(Host.java:200)
    at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.handleRequest(ConnectionHandler.java:162)
    at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.run(ConnectionHandler.java:81)
    at java.lang.Thread.run(Unknown Source)
2012/04/23 12:00:32,368 [ConnectionHandler-Adobe Drive.exe-2796] ERROR AddServerHandler - Adding server failed
com.adobe.drive.data.model.DriveException: the server with uuid elvis_server_192.168.72.87_8080 could not be mounted
    at com.adobe.drive.internal.biz.filesystem.mount.OperatingSystemIntegrationWin.mount(OperatingSystemIntegrationWin.java:109)
    at com.adobe.drive.internal.biz.filesystem.mount.MountService.internalMount(MountService.java:144)
    at com.adobe.drive.internal.biz.filesystem.mount.MountService.mount(MountService.java:102)
    at com.adobe.drive.ui.ncomm.handler.MountServerHandler.mountServer(MountServerHandler.java:274)
    at com.adobe.drive.ui.ncomm.handler.AddServerHandler.handle(AddServerHandler.java:136)
    at com.adobe.csi.internal.ncomm.InvokeHandler.handle(InvokeHandler.java:88)
    at com.adobe.csi.internal.ncomm.NCommDelegate.execute(NCommDelegate.java:107)
    at com.adobe.versioncue.internal.nativecomm.host.Host.execute(Host.java:200)
    at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.handleRequest(ConnectionHandler.java:162)
    at com.adobe.versioncue.internal.nativecomm.host.ConnectionHandler.run(ConnectionHandler.java:81)
    at java.lang.Thread.run(Unknown Source)

Hello,
I am actually trying to implement a text editor with multiple carets,
highlighting discontigous regions. Does anyone know how?
Thanks

Since updating to Firefox 35 it's the only browser that shows error "Unable to connect" and nothing works from the support answers to solve it

so far i tried:
1. to set the windows firewall settings
2. I've reinstalled firefox
3.

Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Unable to connect Satellite C55-A to the WLAN

Similar Messages

Maybe you are looking for