Unable to connect secomd iMac to Time Capsule

I have one iMac running 10.6.4 and this connects via ethernet perfectly to my TC. I am now trying to connect a second iMac (10.5.8) but in Finder it says 'connection failed'. I have Renewed the DHCP lease on this second iMac. No change. I can ping the TC from this second iMac OK. If I try the GO afp://192.168.0.5 then I get an error message saying that the text is not recognisable as a URL etc and that it must start with afp:// ....and that is exactly what I've typed in.
So I'm baffled.

via Ethernet. Whenever I'm setting things up from scratch I always prefer to use a cable as that eliminates one potential source of problems. The network configuration is router > switch > Macs, TC, printer etc. The second iMac can access the internet, network printer etc.

Similar Messages

Unable to connect to internet using time capsule

Over the last couple of days I have run into a peculiar problem. I am able to connect to the internet when I connect the ethernet cable directly to my computer. Now when I use time capsule to connect wirelessly, the connection either does not get established or if it gets established fails after a few mins and I am unable to browse the internet. I have noticed this problem especially after Mac OSX 10.6.3 update. I did not have this issue earlier. I am not sure if this is the root cause but would surely like some help.

This behavior may indicate that you are picking up wireless interference from cordless phones, another wireless network, security system or other electrical device. It's hard to pinpoint the exact cause.
Suggest that you start by downloading iStumbler and using the application to display your signal strength and noise on your network. What values do you see for each of these?
Also look at any other networks to see if they might be using the same channel or an adjacent channel as your wireless network. If so, change the channel on your wireless network so that it is as far away as possible from other networks.
If you have cordless phones, turn them all off for at least an hour when you can to see if your network performance improves.
Interference robustness often does more harm than good. Try turning it off. However, if you find that your network performs better with it on, that is an almost sure sign that wireless interference is occurring on your network.
You won't be able to do anything about cordless phones at your neighbors (my neighbor...across the street...can knock me off my wireless network if he is in his front yard with his phone and it rings). Users far underestimate the effect that cordless phones have on their wireless networks.
Post back with your findings when you have tried a few things.

Unable to connect Iphone 5 to Time Capsule Wifi

I have an intermittent problem where my Iphone 5 is unable to connect to my Home Wifi via Time Capsule.
Once I was watching youtube then suddenly realised I am on 3g and not connected to my Home Wifi.
I already configured my Time Capsule's AirPort Utility to the following setting:
Radio Mode: 802.11a/n - 802.11b/g/n (Automatic)
2.4GHz Channel: 3
5 GHz Channel: Automatic

I am able to scan the other networks from my neighbors which are secured so I am not sure what channels they are in. I am also able to see my network once in a while.
I had this problem with my Iphone 3gs before and the solution was to set my Time Capsule's 2.4GHz Channel to 3 (which also came from this forum)

Share internet connection through iMac with Time Capsule

I have a scenario at work where I need to temporarily set another router as the DHCP server. I have a customer who has a typical office setup. They have an iMac which is plugged into a time capsule (TC). A network printer is also plugged into the same time capsule. I have had to move the WAN modem to where the wifi router is located in another room. The office needs to be able to connect to the new WIFI network while still having the network printer work. If I setup TC to "join another network" and put into bridge mode, I can no longer communicate with network printer. Can I choose "share internet" in OSX system preferences> Sharing on iMac, connect wirelessly through iMac and have TC function as a simple network switch somehow while being able to communicate with printer.
Thanks

jdmein wrote:
First, before I get into too much detail: Is it even possible to set up a WPA2 network directly from the iMac without a separate router?
Welcome to Apple's discussion groups.
Despite the fact that WPA2 encryption has existed for years, Apple hasn't seen fit to include that option in its "Internet sharing" feature.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Wi-Fi connectivity lost, ethernet through time capsule works fine. Wi-Fi adapter broken??

Weird... I have been using my iMac through Time Capsule.... Wi-Fi set-up works fine for iPod, iPad and Windows PC. Last week I lost my connectivity on iMac temporarily... it re-connected automatically several times, but after yesterday the connection didn't come back. Hooked up my Airport Express for speakers so now I'm connected through Airport Express and Ethernet connector on iMac. What can be wrong here??? Any help is appreciated, and hey, no, the iMac is within Wi-Fi distance!
Thans a lot..
Peter

Try downgrading your TimeCapsule to 7.5.2 (it proved to solve almost all the problems with Time Capsule). You can check how to do it here: http://support.apple.com/kb/HT1218

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I simply unplug the Time Capsule from my computer?

I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?

can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule.

Connection with iMac and Time Machine VERY slow

People
For the past of couple of days the connection with my iMac and Time Capsule has gone askew. The iMac shows the wireless connection at 5GHz with a transmit rate over 200. However, internet is slow and backing up about 300mb is in its 24th hour and it's only reached 180mb.
I don't understand what may have happened. The two machines have been best mates for a long time and now something's gone wrong. The only thing I did a couple of days ago is install the Update for the Apple Magic Mouse.
On the other hand, my MacBook, which also have the Magic Mouse update, has not trouble with internet speed - wireless, once again - and the Time Machine backups are happening without a hitch.
I bit the bullet and turned off the Time Machine and rebooted it. Unfortunately, it's made no difference.
Does anybody have any suggestions?

Both your 5 GHz band and the guest band have the same SSID unless you have assigned separate names to them. I think it's much easier to identify them if they have separate names of your choice.
If you have a separate name for the guest 2.4 GHz band, click on the Airport icon at the top of your screen and then click "Join other network". The 2.4 GHz band should appear as a choice and you can connect to it.
I'm using Leopard, not Snow Leopard so I don't know if things display the same way on our operating system. If you want your computer to connect to a given network:
Click System Preferences, then Network.
Click the AirPort connection on the left and then click the Advanced button at the lower right. You can drag the network that you want your computer to connect to first to the top of the list.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Connect apple tv to time capsule with ethernet?

How do you connect apple tv to time capsule with ethernet?

Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

I can't connect my WD to time capsule

hello, i've a problem, my WD "my book for Mac" don't connect to time capsule usb port.
When i try to connect to time capsule, airport app tell me the following: Must repair the disk.
How i can connect my WD to time capsule??
Best regards.
Pedro Pino

What TC model and firmware is it?
WD mybook are generally ok.. but the unpowered type will have problems.. you need a powered hub.
And some of the older TC will not handle all versions of some products.. WD keep changing them around.
It is often hard to figure out what works and what doesn't.
I am trying to assemble a database here.
USB drive compatibility with Airport Routers. Help make database.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

Download 5.6 utility for Lion.. inbuilt version is hopeless.
http://support.apple.com/kb/DL1482
Set TC and wireless names to short, no spaces, no special characters.. ie pure alphanumeric.
Lock the wireless to fixed channels.. only 2.4ghz matters.. as iphone cannot connect to 5ghz.
Try 6, 11 first then 1. I think bluetooth may be set to use lower channels.
That seems to have fixed it for most people.

OK to connect a Mac to Time Capsule simultaneously by wifi and cable?

I just added macbook to my airport network hosted by a time capsule. Next, I want to run an initial time machine backup of macbook onto the time capsule via an ethernet connection.
Should I shut off airport on the macbook before wiring it to the time capsule? Or can the software happily handle two simultaneous connections between newmac the time capsule, one wireless, the other wired? If so, is Time Machine smart enough to realize that it should use the faster wired connection?
Thanks!
Tom
Message was edited by: tttny

Shortly after posting this question I realized that it should have been posted in the Airport>Time Capsule forum. I've repeated the question in that forum and request that replies be posted there. http://discussions.apple.com/thread.jspa?threadID=2489542&tstart=0

Unable to connect secomd iMac to Time Capsule

Similar Messages

Maybe you are looking for