Unable to connect shared drive on Sun host via PCNFS v5.1

I am trying to setup a shared directory on a Sun host running SunOS Release 5.6. I have an old version of PCNFS v5.1 for DOS that I require for a legacy application which seems to be setup correctly. However when I try to mount a shared drive on the Sun server I using "mt.exe" I get the message "Unable to connect the resource '/dirname' from the Server 'name'. Reason: Unrecognized RPC error number 1005." When I try to use the "net use..." command it also fails with the message "PCNFS 251F: The NET USE failed with an internal error code of 1005." I have mountd and rpc.pcnfsd running on the Sun host and would appreciate any help that can be provided. Thanks!

I have looked under Wireless/Advanced Wireless Setting, and in fact, all around in the setup, but don't have any parameter called AP Isolation. Router model is BEFW11S4.
Any other ideas?

Similar Messages

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

I am unable to connect to my RackSpace Windows Server via ARD. I have added a computer entering the ip address, username, and password but I can't establish a connection. I am missing a setting or to step that is different in ARD?

ARD only works with Windows computers if the Windows computer is running VNC server software. Even then it can only control and observe. Do you have this installed?

I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however if I use my laptop in the same physical locationand using similar procedures I am able to conect.?

What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

Unable to connect Panasonic HDTV to home network via Wi-Fi

I am unable to connect my Panasonic TC-L37E3 to the internet via Wi-Fi. I purchased the additional Wi-Fi adapter for the set, and while setting up the connection I am able to see my wireless network on the TV.
I have a basic WEP key, but I am unable to connect to the network via any of the connection options given. For every option there is a two minute timeout which is the eventual result of each connection attempt.
My router is 9100EM, with at 10M/2M service plan. I am unable to connect the TV directly to the router via CATV since it is a considerable distance.
Has anyone experienced a similar issue or can suggest any troubleshooting actions?
Any help is greatly appreciated!

Try switching the router off of WEP and onto WPA2. There is a WEP Setting regarding Authentication that allows for Open or Closed authentication, but even then, devices expect Open. WPA2 is faster and more secure, and it's a good bet that the TV will work once you switch the router over.
You can change the security settings by going to http://192.168.1.1/ and logging in using admin as the username, and your router's serial number as the password. In the Advanced Wireless Settings, you'll find the option for WPA2. Enable that option with Pre-Shared Key and set a Passphrase (if one is not already set), and then set up your devices to use that Passphrase (is case sensitive) once you apply the settings.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Since ios8 and update.2 I have been unable to connect our TV to the iPad via a cable the statement says unsupported device

I Am unable to connect ipad to tv since the update to ios8 and .2 update has made no change

Thanks Diavonex!
That was it!
I AM very grateful! :)
You're AWESOME!!!
cMorr

Nokia X2 RM1013 unable to connect: USB driver miss...

Hi,
Trying to connect to the Nokia X2 but Windows 7 can't find a USB driver..
That means the Nokia software can't connect..
How does one find a USB driver for the Nokia X2?
The butterfly effect

http://www.3ptechies.com/mobile/android/android_adb-drivers-download.html
Found some ADB drivers for the older Nokia X models which seem to work with the X2 as well.
Despite installing them (Windows 7 now seems happy with the drivers) still can't connect with Nokia Suite or the older Nokia PC Suite.
Been trying to copy the data over with MobileTrans as well:
http://www.wondershare.net/ad/mobiletrans/?gclid=CIjD78v0s8ECFQd8vQodLHAAqg
However it seems to be unable to find the phone despite drivers now being installed.
It did copy the data from the old Nokia 700 very effectively... but that's only half a job.
Anyone successfully transferred their data via a USB?
The butterfly effect

Unable to connect iPhone 6 and iPad mini via bluetooth for handoff iOS 8.1

Hi,
I have been trying to use handoff(Continuity) between my iPad mini and iPhone 6 both using iOS 8.1.
I managed to be able to do it with iOS 8 with a 5c instead of a 6 but now my iPad can not be detected on my phone and vice versa and if they do appear they will not connect and then disappear off the list.
Its a shame one of the main features I was looking forward to I am unable to use (I can't even use it on my mac because it is outdated!)
Is there anyway to get around this?
Also I know this is off topic but I travel on trains a lot and my iPad mini is not cellular if I can get handoff working again is it possible to still use the sms forwarding feature?
Thanks,
Bruce

Your post reads like you think that you are reporting a bug to Apple but be advised that this is a user-to-user technical help forum. You aren't talking to Apple here just other users like yourself. This isn't a bug reporting forum.
To report a problem to Apple use: http://www.apple.com/feedback/ipad.html
Be advised, however, that I and many others are using iOS 6.1 with WPA2-secured WiFi networks with no problems at all. (iPad 3, iPad 4, iPhone 5)
Did anyone suggest checking if the firmware in your Comcast router is up-to-date or suggest something as simple as restarting the router by removing power to it for 30 seconds?

For the last 2 days I have been unable to connect to the AppStore or iTunes via either my iPhone/iPad or MacBook over wifi.

I have spoken to my ISP (Sky) and they haven't got a clue.
I cannot connect to iTunes/AppStore on any of my 3 devices (iPhone/iPad/MacBook) when connected to my home broadband yet I have no issues over 3G on my iPhone.
I also cannot play YouTube videos on iPhone/iPad via the app or the website but have no issues on my MacBook. I have done all of the usual things like rebooted devices, reset network setting and all settings. I would restore but that isn't going to go so well if my MacBook won't talk to iTunes is it?
In all my years I have never had an issue like this before, it HAS to be down to my ISP right?
Any advice will be GREATLY appreciated, thanks.

Thanks for the reply.
So far I have reset and rebooted my router, the firewall is as default, no blocked sites etc
Sky don't have a clue what I'm talking about so can't really help me.
Just don't get it :(

Unable to connect iPad to samsung galaxy s5 via hotspot?

I'm able to connect the iPad to an iPhone with no problem.

Let's see what's going on tellme! What error do you get when connecting to Galaxy S5? How far do you get when connecting?
Thank you
VanessaS_VZW
Follow us on Twitter @VZWSupport

AirDisk File Sharing - Saving Files - Unable to connect via wires then...

OK, I followed these instructions from another poster as I was unable to save Microsoft Word documents directly to the drive via the "Save As" option...
-------- PREVIOUS POSTERS INFO ----------
The solution that works for me is to mount the AirDisk(s) using SMB instead of AFP.
This means you should log on the AEBS and configure the Disk for Windows File Sharing - this is on the 'File Sharing' tab of the Disks configuration group.
You only need to put in a Workgroup Name (I used "Basestation"). Don't worry about the WINS Server.
You should update your AEBS, and turn of the AirDisk Utility.
You then mount your disk(s) using SMB. You can do this using the Finder -> Go -> Connect to Server.
Enter the following:
smb://"YourBaseStationName".local./"YourDiskName"
You should then be asked to enter the Workgroup name, the disk name and the disk password.
This should mount your AirDisk using SMB.
In my experience, this not only solved my problem re saving within Word/Excel, but also increased the speed with which I can access the AirDisk...
(If you want these Disks to mount automatically when you login, then Add these disks to you Start Up items in your login account...)
-------- END POSTER ------
OK, so here is my problem... After doing this, I was able to save a file directly to the drive... I also followed these instructions as it said it would be faster overall... Now, I use Apple Backup 3.1 to backup both my laptops to my external hard drive on the Extreme. Well, when I brought up the drives on my desktop, the names didn't change, but the names of the drives were all capital letters... I think this threw off the Backup program because it said that it doesn't recognize this location, therefore, it showed that he had never backed up to that location before. So, figuring I changed it and caused a few minor changes, that I would just erase the hard drive, plug the hard drive directly into the laptop as I had done before to speed up the inital backup, and then go back to wireless backups thereafter as they wouldn't be "full" backups and would then be faster and tolerable. Well, when I went to connect the drive to my laptop via the USB cable, you could hear the drive mounting, you could see the drives mounted in Disk Utility, but they refused to show up on the desktop, no matter what. What does this mean? Did making the drives work as File Sharing drives make them no longer able to mount via a cable anymore? What gives? Any ideas?

1. My USB 500GB External Hard Drive is currently
partitioned into three different drives. The Volume
Format is "Mac OS Extended (Journaled), what is
that?
Mac OS Extended (Journaled) is one of the HFS formats. Apple does not use the term HFS anymore but it is the same thing. You can find a good explanation about it here http://en.wikipedia.org/wiki/HFS_Plus
This will explain journalling, http://en.wikipedia.org/wiki/Journalingfilesystem
2. What is a FAT volume? What does FAT stand for?
Where would I select that?
Here is an explanation about FAT http://en.wikipedia.org/wiki/FileAllocationTable
It is a choice in Disk Utility when you erase a disk.
3. What is an HFS volume? What does HFS stand for?
Where would I select that?
See above: Mac OS Extended.
It is a choice in Disk Utility when you erase a disk.
4. What does SMB mean/stand for?
It stands for Server Message Block explained here http://en.wikipedia.org/wiki/ServerMessageBlock
It is a protocol for connecting to volumes over a network.
5. What does AFP mean/stand for?
It stands for Apple File Protocol explained here http://en.wikipedia.org/wiki/AppleFilingProtocol
It is also a protocol for connecting to volumes over a network.
- Yes, I tried to save an MS Word document to my
AirPort Disk, but it hung up and I got the spinning
beach ball and ended in an error and I had to force
Microsoft Word to quit. Then I saw that posting and
I tried that, I was then able to open an MS Word
document and save it directly to the drive the first
time. However, like I said, it messed up my Backup
3.1 (When mounting as SMB) and made it believe that
this was a whole new drive and that it hadn't backed
up to it before, when it had, but only when I
connected as AFP.
Did Backup work when you connected using AFP?
- So, this would've been a simple fix if I plan on
staying with SMB share, however, when I go to connect
my USB External Hard Drive directly to my laptop, the
partitions do not mount on my drive like they had
before I made the drives a File Sharing device
through AirPort Utility.
Try using Disk Utility to repair the disk or disk permissions and see if you can read it again.
6. How do I get that drive to be recognized by my
computer again when I connect it directly to my
laptop?
I don't know why this is happening you may want to call Apple Support about that.
7. I don't care about anything Windows/PC, so
whatever way is FASTER and provides the BEST results,
let me know!
If you don't have PCs then stick with Mac OS Extended (Journaled) as your volume file format.
8. Also, when I select "Connect to server" and then
click "Browse" and then "Network" nothing shows up in
there, but when I type the path in they connect just
fine, why?
That's strange! All available network volumes should show up when you click on the Network icon in the Finder. I don't know why it is not working for you.
THANKS FOR ALL THE HELP!
Some thoughts!
I would stick with Mac OS Extended (Journaled) as your volume file format. If backing up to the network share is important to you, I would wait until Apple fixes the problem regarding opening and saving Word files directly to the network share (Air Disk). Save them locally and then copy them to the network share.

Unable to connect to external hard drive

Have just switched from a macbook to macbook pro, transferred all data etc via firewire with no problem. I have recently purchased an extreme base station and have ben using this with an imac and the mac book. I have a usb external drive and a printer connected to the base station via a usb hub. Both have worked flawlessley over the wireless network with the macbook. However, I can't get the new macbook pro to see the external hard drive, I have checked the automatically mount disk box etc, all to no avail.
Any ideas??

I have successfully connected two drives via a USB HUB, which worked flawlessly. I am however unable to connect another drive of a different brand and size and get it to be recognized. That drive is a Lacie bid drive ( 2 terabytes). It looks like the drive itself is an important factor. I tried every thing and this big drive would not mount.

Server unable to connect locally in general

I appear to be unable to connect to anything that is hosted on my server using IE and various other web browsers on the server this makes trouble shooting IIS difficult since it means I have to enable full errors for the world to see.
This page can’t be displayed
Make sure the web address http://www.****.co.uk is correct. (The URL is * for obvious reasons)
Look for the page with your search engine.
Refresh the page in a few minutes
Also I appear to be unable to connect to the local mySQL server for some reason. As stated in the title the server appears to be unable to connect to anything that is hosted locally, be it 127.0.0.1, localhost or even connecting to its own IP address.
Any help Will be much appreciated, thanks.

They may be able to help over here.
http://forums.iis.net/1052.aspx/1?Troubleshooting
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Unable to connect r/3 to bw

Hi eveybody,
My problem is I want to connect r/3 to bw
r/3 side : host name :erp, database : oracle, database name : erp, windows 2000 server
bw side : host name : biw , database : sqlserver, database name : biw , windows 2003 server
i can connect from r/3 to bw with remote login but unable to connect from bw to r/3 via remote login,
if u need any clarification from me, then i will pass to you.
pls help me in this regard,
With Regards,
salman

Salman,
If you can connect one way and not the other, then you'd need to check how you are attempting to connect from R.3 to the BW box. I am assuming that if you do a connection test from R3 to the BW system, it is successful - this will test the TCP/IP connectivity between the systems, making sure the systems can resolve an IP address and open a port (no firewall issues).
Are you seeing a specific error? Possibly, it is as simple as making sure that the user ID you're using to logon to the R3 system is not allowed to logon (assign the S_RFC profile to the user ID). Alternativly, it could be an incorrect password, invalid client, etc.
If none of these suggestions help, please send back the error message you see when this fails, check the R3 side for short dumps and system log messages, check the user ID you're using in the R3 system to make sure it is not locked and that it has proper authorizations. Also, what version(s) of SAP are you using? Is everything here based on WAS640? WAS700? Do you possibly have a mixed release environment? For instance, if the bw system is WAS640 and the R3 system is WAS700, then you could have an issue with capitalization mismatch.
All kinds of stuff. Let me know how you do!
-Tim

451 4.4.0 primary target IP address responded with 421 4.4.2 unable to connect

Hi,
I'm running two Exchange 2010 servers both with HUB, CAS and Mailbox. They are setup with one DAG. I also have a load balancer. Each server has the primary network adaptar and one loopback adapter for the load balancer VIP. Everything is working OK except the fact the delivery of messages.
When I fail one of the nodes, messages will start to take almost a minute to be delivered. Messages from users on the same database, using the CAS of the still functioning server.
The message queue viewer shows:
451 4.4.0 primary target IP address responded with 421 4.4.2 unable to connect Attempte failover to alternate host, but that did not suceed. Either there are no aternate hosts or delivery failed to the all alternate host.
The message is still delivered after some time.
What can be the problem here?
After running a packet sniffer, I can see that Exchange 2010 will always try the same HT server (the other server that failed) and only after some timeout it will try the local HT. As far as I know, it should try the local server first when a mailbox and a HT share the same server. But it is not doing that.

What is your Queue Glitch Retry Interval?
http://technet.microsoft.com/en-us/library/bb124568(v=exchg.141).aspx
HossFly, Exchange Administrator

I cannot update my Apps from iTunes store message says unable to connect but can connect via iTunes button not apps button ?

I. Am unable to update Apps from iTunes via the apps button messages says unable to connect but can access iTunes directly via iTunes button on iPad
Cheers

Unable to connect shared drive on Sun host via PCNFS v5.1

Similar Messages

Maybe you are looking for