Unable to connect to airport after downloading latest iTunes upgrade

Having downloaded the latest version of iTunes I am no longer able to connect it with my Airport. The error that appears on the screen is as follows - "An unknown error occurred (-3256)". Is this a common problem? What steps do i need to take to repair this?

I have the same issue. I'm using the latest firmware and even tried resetting my airport express but problem did not go away. Currently I'm streaming using Airfoil/iTunes as a workaround.

Similar Messages

ITunes on MacBook Pro won't recognise my iPhone 4S after downloading latest iTunes. What to do?

iTunes on MacBook Pro won't recognise my iPhone 4S after downloading latest iTunes. What to do?

iOS: Device not recognized in iTunes for OS X

Help, cd reader won't read cds after installing latest itunes upgrade.

Just inserted a music cd (non-pirated) into my macbook but it keeps getting auto-ejected. Tried this with several music cds. This issue only cropped up AFTER installing the latest iTunes update on 11 June 2011.

Hi, and welcome to Apple Support Communities.
You could try going to System Preferences > Accounts and create a new account to see if the problem also occurs in a new account. If so, it would point to a hardware problem with the optical drive.

Trouble connecting to Airport after installing latest security update

Hi, I have just spent an hour with a level 2 SBC DSL tech and they could not resolve my problem. The problem is this: After installing the latest security update released on March 13 for OS 10.3.9, I can no longer securely connect to my airport. It may have something to do with the keychain because this has happened several times before, most recently after the previous security update about 2 weeks ago. Usually after much playing around, I get a window asking for permission for my new network settings to access the keychain. Once I say yes, all works fine. This time, I am not getting that prompt. Even though I have a full signal showing I am connected to the base, it will not pick up and IP address. Finally, the SBC tech had me disable the wireless key on the desktop pc that is the primary computer on the system and immediately my connections works. If I enable the wireless security key, I lose the connection. As I am completely open to hackers with the wireless security disabled, this is a big problem. PLEASE, PLEASE, PLEASE can anybody help me?! Thank you so much for your help!

Hi, my first post here!
I too experienced this problem this evening, after applying the latest security update to Panther. I had verified that the wireless base station was working correctly and that it's WEP key hadn't become corrupted. There were no error messages after re-starting the Mac, just no IP number via airport.
The keychain utility would hang if any attempt was made to alter the password for WEP, and the airport utility hung too. I used Disc Utility to verify permissions, which found dozens of errors - haven't done any maintenance for months - and fixed them.
On re-starting, Airport was 'OFF' so turned it on, was asked to allow access to keychain, and all is working again.
Thank you to those of you who posted the suggestion about permissions, you certainly saved my evening!
Chris

Airport unable to connect to internet after 10.4.11 upgrade

I was previously using 10.4.9 and the computer always connected to my network with full bars. After I combo upgrade to 10.4.11 this stopped happening. I get a long pause and then this message: There was an error joining the Airport network. Fortunately, I can connect to another router in my neighborhood that isn't password protected without difficulty. But I don't want to rely on that. What's the problem??
P.S. I've tried restarting my modem/router but I still can't connect.

I'll find out when they open up tomorrow!
Other sites say Apple is "aware of the problem" - I'm just going to have to revert to my last backup. Thankfully it wasn't too long ago. I tried changing the WEP/WPA settings on my router and removing the encryption altogether. I'm back on a wired connection. If things don't work out for you, the Linksys WET11 has an ethernet jack at one end and an antenna on the other. So you could theoretically "fool" your computer into thinking it's on wired internet even though it's using wifi.
I do hope for a clean and quick solution for both of us!

After the latest iTunes update, why does it keep asking me to enter my password to check for downloads?

After the latest iTunes upgrade, every time you open up iTunes, a window pops up asking you to sign in with your Apple ID to check for available downloads? Why is it asking this if your account is already stored on the computer? How do you stop this from asking each time? Thanks.

Hi Skip_Collins,
If iTunes is repeatedly prompting you for your password, you may find the following article about a similar issue helpful:
Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
- Brenden

I downloaded latest itunes 12 now when i try to open itunes i get error message 7 with ( windows error 5 ) I have latest windows framework. Help me please !

After downloading latest iTunes 12 I cant open iTunes window says not installed correctly please re- install error 7 ( windows 5 ) PLEASE HELP

Take the unpacked components of the iTunesSetup.exe or iTunesSetup64.exe file and move them to the root of drive C:. Try installing them individually in alphabetical order (don't try to install SetupAdmin.exe which drives the original installer, or iCloud.msi unless you have Vista). You may get a more useful error message regarding any problems during the install.
msiexec /i C:\AppleApplicationSupport.msi /l*v C:\Log_AAS.txt
msiexec /i C:\AppleMobileDeviceSupport.msi /l*v C:\Log_AMDS.txt
msiexec /i C:\AppleMobileDeviceSupport64.msi /l*v C:\Log_AMDS64.txt
msiexec /i C:\AppleSoftwareUpdate.msi /l*v C:\Log_ASU.txt
msiexec /i C:\Bonjour.msi /l*v C:\Log_Bonjour.txt
msiexec /i C:\Bonjour64.msi /l*v C:\Log_Bonjour64.txt
msiexec /i C:\iTunes.msi /l*v C:\Log_iTunes.txt
msiexec /i C:\iTunes64.msi /l*v C:\Log_iTunes64.txt
You can triple-click a line to select all of it, then press Ctrl+C to copy, switch to the command box and click the icon at the top left of the window to access the paste menu. Which components you have depends on whether you've unpacked the 32-bit or the 64-bit installer.
The log files might provide further clues as to what is going wrong.
tt2

TS1372 After the latest iTunes update iTunes no longer sees either of my ipods. Diagnostics says no ipod connected. However my laptop, which is running Window 8.1 does see the ipod.

After the latest iTunes update neither of my iPods are recognized by iTunes, so I am unable to sync. When I run diagnostics it says no device connected. My laptop sees my iPod so I know it is connected. I have tried all of the recommended iTunes fixes and none work. I tried deleting and reinstalling both an older version and the newest version. The older version would not reconize my music libray. Any thouhts?

I tried deleting and reinstalling both an older version and the newest version.
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Unable to Connect to WiFi after iPhone power off; WiFi & internet are working with MBP; common problem, no solutions?

Here's my setup: Internet <> Comcast/xFinity supplied cable modem <> new Apple Time Capsule <> iPhone 4 & MacBook Pro (see below for hardware details)
Internet on my iPhone 4 has been acting slow since yesterday evening. My MacBook Pro was running fine, but just to be sure I checked the Comcast website to see that I have only used 50GB of my allotted 250 GB of data for the month, so it's not that.
I decided it must be a problem with just my iPhone, so I opened up the multitasking bar and quit everything in there manually, and then I held the on/off button, and slid the slider to power off. When I started back up, I could not connect to the same WiFi I had just been using. I tried to reconnect and nothing. I tried to forget the network and try again, nothing. I tried to reset all network settings, nothing.
I have tried all the steps listed here: http://support.apple.com/kb/TS1398 "iOS: Troubleshooting Wi-Fi networks and connections"
Toggled WiFi off and back on
Made sure I am in range of the router (it's about 8 feet away and my iPhone reports full signal from the network)
Made sure all the hardware is connected and on
Checked other devices (I'm successfully connected with my MacBook Pro right now)
Checked for router firmware upgrades (I have a new Time Capsule from Apple with the current 7.5.2 firmware which I've been using for a month)
Restarted my device (again)
Checked that the network is available (it does show on my iPhone)
Restarted my Time Capsule
Checked my router configuration as described here: http://support.apple.com/kb/TS3727 "Wi-Fi: Unable to connect to an 802.11n Wi-Fi network" which involves simply checking to see that WMM is turned on, also stating that WMM cannot be enabled or disabled for Apple's AirPort products.
Reset my network settings (again)
I have searched and searched for fixes to this problem, and I have additionally tried:
Enabling/disabling Airplane Mode
Disabling any network password protection/encryption (no luck), re-enabling it (no luck)
Changing the network password
Checking for hardware addresses present in iOS Settings > General > About (they are present and not zero'ed out)
Switching Bluetooth off (nothing) and back on (nothing)
....and probably a few other things I can't think of right now
I have yet to try:
The "Freezer Trick" which apparently involves chilling the iPhone to get a temporary fix?
Restoring the iPhone (I would really rather not)
A different WiFi network (other than my own Time Capsule home network or guest network, both of which give the same Unable to Connect error)
So, after all of that, are there any more ideas? Is there a reliable solution to this issue? So far I've just seen a lot of "mess with the settings," "the freezer trick worked," and "blame it on the iOS 4 update."
Here are my hardware details:
iPhone 4; iOS 5; 32GB; AT&T; no cellular data plan (July 2011)
TimeCapsule6,113; Firmware 7.5.2; 2TB (September 2011)
MacBook Pro 3,1; Mac OS X (10.7.2); 2.4 GHz Intel Core 2 Duo; Hi-Res Display; 4GB RAM; 500GB HD (August 2007)
...and the Time Capsule config:
http://cl.ly/BCUt

Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
Jinkies.

After downloading latest quicktime update, itunes store will not load

Has anyone had this same problem after downloading latest quicktime update. iTunes store will not load.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Problems to sync my computer calendar with my Iphone after installing latest Itunes download

problems to sync my computer calendar with my Iphone after installing latest Itunes download

When I connect my Iphone to the computer Ai have to sync automatically my outlook calendar. Never had any issues except with the latest download that tell is doing some sync over the air with ICloud and that I can go to my Iphone and change that. So far I have not been able to sync my Iphone calendar with my outlook calendar for tge whole week

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

My itunes is up to date on windows vista but my iphone 3gs wont download the new 4.3 sofeware saying that network connection timed out after downloading for 7 minutes. can anyone help?

my itunes is up to date on windows vista but my iphone 3gs wont download the new 4.3 sofeware saying that network connection timed out after downloading for 7 minutes. can anyone help?

I have manage to update. You need to disable windows firewall and
You have any other anti virus (I have kaspersky) you need to disable that as well

VERY FRUSTRATED!!! Downloaded latest itunes on my PC, connected ipad 2, registered device. It says follow onscreen instructions. What instructions. When I turn on my ipad I get an itunes icon with an arrow and a connector cord. Can anyone help me???

VERY FRUSTRATED!!! Downloaded latest itunes on my PC, connected ipad 2, registered device. It says follow onscreen instructions. What instructions. When I turn on my ipad I get an itunes icon with an arrow and a connector cord. Can anyone help me???

hi Yojoeyo,
i have the same problem. did you figure it out? it looks like no one replied to your questions.
Derek

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. How do I uninstall and reinstall the software? Adobe's instructions are only for Window devices.

After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software. How do I uninstall and reinstall the software? Adobe's on-line instructions are only for Window devices.

You can just drag the file to the trash. If you want you can remove the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.

Unable to connect to airport after downloading latest iTunes upgrade

Similar Messages

Maybe you are looking for