Unable to connect to an Exchange Server iPhone 5
While I am able to go through the setup and get no errors, when I actually try to get mail it shows "Connot get mail, the connection to the server failed".
I am on my companies wifi. this is the first new iphone 5 i have tried to setup. All previous models are working fine.
Suggestions?
Thanks,
Bill S.
OK,
So here is the latest: ANY iPhone 5 (tried four different phones so far) on Verizon is not working on Exchange at my office.
HOWEVER, any AT&T iPhone 5 WILL (three added with no issues!) work with the same settings!
WHY is there a difference!?
At a total loss here...
Edit: I'll add that when putting in the Exchange settings, all went well and each setting had a green check next to it at the end.
However, when trying to access the mail, the error is: cannot get mail. The connection to the server failed.
Thanks,
Bill S.
Similar Messages
-
Unable to connect to the Exchange server using HTTP/HTTPS protocol.
hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............
<!--- connection parameters --->
<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>
<!--- Open a connection to the exchange server by
specifying the required user credentials --->
<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"
<!--- protocol = "http"--->
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>
<!--- Close connection to exchange server --->
<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>
<!--- Error Information --->
<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the <!--- protocol = "http"--->
comment which you placed inside the "<cfexchangeConnection>"
tag. -
Unable to connect to MS Exchange server on ipad4 after upgrade to iOS 7.1.2
I received a new iPad 4 through work. Upgraded to iOS 7.1.2, but now I'm not able to connect to the Exchange server. Contacted IT through work, they have no idea how to correct it. They say all of my settings are fine. The error message says "Cannot Get Mail The connection to the server failed." Any thoughts?
Hello harrisk927,
It may help to remove and readd the account on your device.
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen -
Unable to connect to local Exchange 2013 server when opening Exchange Management shell
Hi Everyone
Yesterday evenything was working fine, and then this morning, I`m unable to establish a connection with the Exchange shell. I receive the following errors. Any help is appreciated.
Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #55:
Want to view the mounted status of all mailbox databases? Type:
Get-MailboxDatabase -Status | Format-Table Name, Server, Mounted
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
VERBOSE: Connecting to .
New-PSSession : Cannot bind parameter 'ConnectionUri'. Cannot convert value
"http:///powershell?serializationLevel=Full;ExchClientVer=15.0.516.32;clientApplication=ManagementShell;TargetServer="
to type "System.Uri". Error: "Invalid URI: The hostname could not be parsed."
At line:1 char:30
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [New-PSSession], ParameterBindingException
+ FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewPSSessionCommand
[PS] C:\Windows\system32>
Ernie Prescott
Updated information.
I can succussfully connect to the exchange powershell from a remote computer, using this method.
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
http://<FQDN of Exchange 2013 Client Access server>/PowerShell/ -Authentication Kerberos
Import-PSSession $Session
So the problem is localised on the server.
RegardsHi
Try the steps for Error 1 on this link
http://www.petenetlive.com/KB/Article/0000477.htm
Hope it will help
Cheers
If you have any feedback on our support, please click
here
Zi Feng
TechNet Community Support -
Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advanceHi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support -
Outlook is unable to connect to the proxy server.(Error Code 10)
Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support -
Outlook is unable to connect to the proxy server. (Error code 0)
Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Hi All
Exchange Server - 2013 CU2 (Windows 2012 Standard)
AD Server - 2003 R2 SP2
exchange-svr01.domain.com - internal name
mail.company.net - external name
When users opened Outlook 2010, they will encountered
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
Outlook is unable to connect to the proxy server.(Error Code 10)"
I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
The RPC/HTTP test completed successfully.
Validating the certificate name.
Certificate name validation failed.
Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
Testing SSL mutual authentication with the RPC proxy server.
The test passed with some warnings encountered.
The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
please help.Hi PS CL
[PS] C:\Windows\system32>Get-OutlookAnywhere
RunspaceId : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
ServerName : exchange-svr01
SSLOffloading : True
ExternalHostname : mail.company.net
InternalHostname : exchange-svr01.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 712.22)
Server : exchange-svr01
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
Identity : exchange-svr01\Rpc (Default Web Site)
Guid : 33c3cb74-e490-487d-844c-4072334089a1
ObjectCategory : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 8/17/2013 10:14:55 AM
WhenCreated : 6/25/2013 1:47:50 PM
WhenChangedUTC : 8/17/2013 2:14:55 AM
WhenCreatedUTC : 6/25/2013 5:47:50 AM
OrganizationId :
OriginatingServer : ADserver.domain.COM
IsValid : True
ObjectState : Changed -
I originally had the issue where it would not connect at all but got that fixed.
Now I am experiencing the issue when trying update the ipad ios to version 5
The process finished backing up the ipad then it says unable to connect to the backup server try again later
Any idea what I need to do now?
thanks for any helpSee
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
N8 Email - Unable to connect to mail service serve...
I have my Nokia N8 for a good few months. Email stop sync-ing so deleted my 1 and only email account (Hotmail) and now I can not get any email back.
I have played with internet settings, rebooted my phone but still nothing.
Basically, this is what happens:
Got to set up email
Some text comes up about what mail can do and you have the option of start of exit
Press start, and it says preparing for set up, then it comes up with Unable to connect to mail service server. try again later.
The next options I have are to enter email and password or cancel.
If I enter email and password it comes up with an option to click on mail for exchange and I have to start entering user name, domain, etc or I can exit.
So, can anyone help me restore the email function. When I got the phone you had an option of hotmail, yahoo, etc etc. And that is what I want back.
Also I should mention, I don't have any options around pushing or pulling email as it never gets that far into setting up email.
I live in the UK, so was wondering if I should just take it into my local carphone warehouse who deal with Nokia support and demand it gets repaired? It's part of what I paid for so they should repair/replace for me?
Any advice would be good,
Thanks
Vicki
Solved!
Go to Solution.For the answer of both how and why please refer to the post by Abi99 earlier this week:
http://discussions.nokia.com/t5/Symbian-Devices/quot-Unable-to-connect-to-mail-service-server-quot-o...
Please click the star below that post to draw attention to the expired Nokia certificate, which Microsoft Mobile Oy must renew to solve the problem! - Also use the false username and false password trick, if it is a first time mail setup on a freshly reset Symbian phone, to avoid any Nokia Messaging clutter, and then input server details manually.
EDIT: The expired certificate was renewed is now valid until 2015-07-10
Hans -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
Mac computers in the office are not able to connect to our exchange server.
We started facing this problem about a month ago in our office where the apple computers can not connect to the exchange server via outlook or applemail or anything for that matter. All the other computers can connect to the exchange server with no problems
and the apple computers can even access the exchange server via OWA but the outlook and applemail apps would not connect to exchange. We have tried even deleting and re-creating some accounts on the apps but they still would not connect. At this point I am
at a complete loss and I looked everywhere through google to find out if anyone else has faced this problem but to no avail.
A little background information. This specific problem started happening after there was an un-expected series of power outages to the servers and they were shut down un-expectedly. I personally restored the servers and turned on all the services and made
sure everything was up and running after the power outages and everything was working fine. Also the first instance of the problem with the mac computers only happened two days after the servers were back up and running again and they had no issues in those
two days.
Right now we do not have that many mac users in our offices (only 3-4 users) and I have instructed them to use the OWA in the meanwhile but it is however an inconvenience to them. By now you may have realized that I am not a very experienced server admin
and I would really really appreciate any help. I extend my thanks in advance for any insight.Hi Martin,
Thanks for the reply.
Right now I have Apple mail and Outlook installed on my mac laptop and both the applications do not connect to the exchange server. Apple Mail simply does a long process when I give my credentials to create my account and then it gives an error saying it
could not find the server while outlook quickly tells me that either the username or password is incorrect. At the same time I can connect to the server through outlook on my windows computer without any problems whatsoever.
From your reply, I gather that the VIA headers only affect Apple mail and should not affect Outlook app on the mac but right now, neither apps are connecting to the exchange server.
Either way I am trying to find out how to remove the VIA headers because it does not seem that we are using Kemp on the exchange server. Right now I do not have the in depth knowledge that I need because I was not involved in the implementation of our server
system, that was taken care of by a service provider and I was put in charge of mostly simple admin work. Now we are out of contract with the service provider so pretty much everything has fallen onto my shoulders.
If possible, would you mind pointing me in the right direction to finding out if I am using a L7 load balancer and how I would go about removing the VIA headers? -
Hi - for some reason, my IPAD3 mail client has decided it can no longer connect to my Exchange server. It's worked like a charm for weeks. Any thoughts?
For the record, I've got a POP mail account that is working fine on the machine and the WIFI is up and running (Safari is loading fine).
ThanksHi Jim,
Your issue is the most FAQ in the forums, it is an ongoing problem with Tiger waiting to be fixed by Apple. Till then, forget your aliases and use either Command-K or from the Finder Go-->Connect to Server and enter the remote Mac's IP address to connect.
Also, Open Utilities-->Terminal and type lookupd -flushcache (Press Return) and reboot. Do this for both macs.
Macs running 9.x, Macs running 10.4.x, SGI workstations running Irix 6.5.x -
SSRS 2012 with SharePoint 2010: Unable to connect to the remote server
We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Launcher Service Event ID: 6102Date: 11/27/2007Time: 8:22:17 AMUser: N/AComputer: MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog
Maybe you are looking for
-
My Mac Book Pro keeps crashing. I don't know why.
My macbook keeps crashing, I've cleared my hard drive, I'm not running that many programs and I've updated to the latest OS. 10.9.5 Anonymous UUID: B9046962-A54E-2C3F-6C24-5FB3000426E3 Fri Mar 13 19:21:36 2015 panic(cpu 3 caller 0xffffff8009a20
-
Why are the wrong paragraphs included when I do a Save As PDF
I'm using FrameMaker 12 and Acrobat Pro XI. When I do a 'Save As PDF' from a book and select the bookmarks I want, and arrange their hierarchy etc. Acrobat includes paragraphs formats that I did not select. For example, it seems to include a random s
-
Adressing multiple copies of Movieclips with the same instance name
Is it possible to iterate through MV copies with the same instance name? It would be very useful for my project.
-
Photoshop keeps a blank window open.
In cs6, when I close all the documents (comand+W) an empty window keeps floatin on my screen. Why? CanI change that? It's a little bit disgusting.
-
Ok.. I print... but its just a blank page..
Not from my computer.. but from others.. am I ignorant on how this works? Does it just work from my computer? The people who are sending the emails are getting a confirmation that it was sent.. but all that prints is a blank page... HELP!