Unable to connect to any secure sites with any browser

I am unable to connect to any secure sites. I downloaded Firefox with the hopes that it would fix the problem but it did not. What ever browser I use I cant connect to any secure sites. All of the other pages load correctly.
I have a PC notebook that I tried to load the same sites it worked fine, so I know that it is not a connecting problem.
emac Mac OS X (10.4.6)
ibook Mac OS X (10.2.x)

Are you connecting via dial up or high speed through a router? If that latter, check the firewall settings of the router. I have my router set to medium (high, medium, low, & none) and it works most of the time. But occationally I get to sites that won't load and setting the router (temporarily) to low usually allows me to access those sites. So perhaps this is your issue.
I think there are ways to add those sites to router security lists or "services" that will now let them through with the higher security settings, but I need it so rarely I haven't bothered to figure it out yet.
Patrick

Similar Messages

Unable to connect to internal SSL sites with unknown CA's after 36.0 update.

Last week my browser auto-updated to version 36.0 and I am now no longer able to connect to certain internal corporate websites. These sites either have self-signed certs, or certs signed by an internal CA. They do not use certs signed by publicly known "trusted" CA's.
For example, one of the errors that I receive is below:
Secure Connection Failed
An error occurred during a connection to [HOST]:[PORT]. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
Although a warning message is received in IE or Chrome we are given the option to proceed and the site opens correctly, despite those browsers also indicating that the servers cert is not trusted.
I have added the internal CA's cert to the Authorities tab in the Firefox Certificate Manager, but am still not able to connect to the internal site.
Firefox allows me to accept some incorrect certs (or at least it did in the past), why is this not the default behavior with *all* certificate related problems? I realize that there are malicious sites out there, but there are also internal ones that are being blocked as well. Is there a config option that can be set so a user is prompted for all cert errors and they can decide to proceed if desired instead of just being blocked from the site? I understand blocking by default, but there also needs to be a way to proceed for advanced users.
Are there any configuration options to loosen the cert standards for sites? All other sites seem to load properly and otherwise there are no problems with the browser.
Sorry if this is the wrong place to post, I wasn't sure where to.
Thanks for any assistance!
-Beaty

First, sorry for the delay in responding, things have been crazy here lately.
Secondly, here is the output from openSSL for connecting to the server:
OpenSSL> s_client -connect qrsa01.qnao.net:443
Loading 'screen' into random state - done
CONNECTED(00000180)
depth=1 CN = RSA root CA for qrsa01.qnao.net, serialNumber = 15702a01a563d5b8f2b
a65250ad81947eef537554eae2320efed2159a8193bd5
verify error:num=19:self signed certificate in certificate chain
Certificate chain
0 s:/CN=qrsa01.qnao.net/serialNumber=3b444eeb8355fb2b5b686d03ce1c0a61cd3552a184
001b9564700f7cebcbe9f0
i:/CN=RSA root CA for qrsa01.qnao.net/serialNumber=15702a01a563d5b8f2ba65250a
d81947eef537554eae2320efed2159a8193bd5
1 s:/CN=RSA root CA for qrsa01.qnao.net/serialNumber=15702a01a563d5b8f2ba65250a
d81947eef537554eae2320efed2159a8193bd5
i:/CN=RSA root CA for qrsa01.qnao.net/serialNumber=15702a01a563d5b8f2ba65250a
d81947eef537554eae2320efed2159a8193bd5
Server certificate
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
subject=/CN=qrsa01.qnao.net/serialNumber=3b444eeb8355fb2b5b686d03ce1c0a61cd3552a
184001b9564700f7cebcbe9f0
issuer=/CN=RSA root CA for qrsa01.qnao.net/serialNumber=15702a01a563d5b8f2ba6525
0ad81947eef537554eae2320efed2159a8193bd5
No client certificate CA names sent
SSL handshake has read 1948 bytes and written 675 bytes
New, TLSv1/SSLv3, Cipher is RC4-SHA
Server public key is 2048 bit
Secure Renegotiation IS supported
Compression: NONE
Expansion: NONE
No ALPN negotiated
SSL-Session:
Protocol : TLSv1.2
Cipher : RC4-SHA
Session-ID: 550194FCFA9BE4A1060430A13EBA67B9EBD793485253412053534C4A20202020
Session-ID-ctx:
Master-Key: F1FD3AB4846FBC14D35EB7BBAFF8704821940DDE5A0549519A0AFF2EC8CAF245
08DCAA6D4F9FB1D125664FC7BFE87E95
Key-Arg : None
PSK identity: None
PSK identity hint: None
SRP username: None
Start Time: 1426167036
Timeout : 300 (sec)
Verify return code: 19 (self signed certificate in certificate chain)
read:errno=0
OpenSSL>
I had already set the tls.security.version.min to 0, so would have expected to be able to connect.
At this point it seems like the problem is that we are using an internal CA to sign the cert for this server, but Firefox won't allow me to proceed despite this. Is there an option that I can set to have firefox prompt on all certificate issues and give me the option to proceed anyways?
Any other thoughts/suggestions?

Using Https to connect to a secure site with J2ME

I have successfully been able to get a midlet using HTTPS connections to work using the J2ME wireless toolkit and following the instructions in this paper.
http://developers.sun.com/techtopics/mobility/midp/articles/https/
I would like to get Https working on a real device now like the Moto RAZR or Samsung A900 etc. Was wondering if someone has experience with HTtps on devices and help answer my questions.
Would I have to use certificates issued by one of the following CAs like thawte,verisign etc and include it on the apache server and then the device would automatically install the certificate when a HTTPS connection is made to the server?
Can self signed certificates be used on the devices , if yes how can they be imported onto the device?
Please help.
Thanks!

Certificates expire by time.
Open System Preferences > Date & Time then select the Date & Time tab.
Make sure: Set date and time automatically is selected.
Now select the Time Zone tab. Select: Set time zone automatically using current location
Now System Preferences > Security & Privacy > Privacy
Make sure: Enable Location Services is selected.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
SQLSTATE: NA000
Native Error Code:0
Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
Does anyone have any fixes, recomendations, or advice?
Thank you,
Eric Edwards
null

Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
name.domain.subdomain
then you should try using this full name when configuring the ODBC data source.
null

TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed

I receive Error code: ssl_error_unsafe_negotiation when I visit any secure site version 3.613

I receive Error code: ssl_error_unsafe_negotiation when I visit any secure site using version 3.613.
I can browse to all of these sites successfully using IE 8.0.6

See this link for information about 'Renegotiation' (CVE-2009-3555):
* http://wiki.mozilla.org/Security:Renegotiation
* https://wiki.mozilla.org/Security:Renegotiation#security.ssl.renego_unrestricted_hosts
You can look at the pref security.ssl.renego_unrestricted_hosts on the about:config page and add the sites that you want to allow to the string value. 
Separate multiple host names by a comma.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use the Filter bar at to top of the about:config page to locate a pref more easily.

Any security issues with My MSN or outlook bookmarks

any security issues with My Msn and Outlook as bookmarks

Your question is not quite clear, and no Mac can iOS, but anything and everything made by or for Microsoft carries a security risk.
Which is why most sensible people run Apple OS X.

Are there any security issues with Quicktime player on macbook

Are there any security issues with Quick Time Player on macbook pro? 2010 model running Yosemite recently upgraded. Thanks!

No.

HP Deskjet 3050 - Unable to connect to WPA secured wireless network

Hello,
My first post here so please excuse any faux pas on my part. I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since. I'd be really grateful if someone could possibly advise on how I can resolve this.
I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue. I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer. If I disable the security, the printer connects fine.
I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled. The router is broadcasting on 802.11G/N mixed mode.
I'm installing the software supplied on the setup CD on a Windows XP SP3 system. I have confirmed that the network the PC and printer are connected to are the same.
A question as well, if I may: I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010. The release notes indicate improved networking, but don't elaborate beyond this. Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
Finally, just a note that I'm partially sighted and am using a screen reader on all systems. I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
Thanks in advance for your help, which I really will appreciated.
Have a pleasant day,
All the best for now and take care,
Hussein.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
This question was solved.
View Solution.

HI,
firstly, apologies for the delay getting back to you. Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved. It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
To resolve the problem, I did the following:
1. Disable all security options for the network, so it's just an open network.
2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
3. Locate the printer's IP address. I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
5. Under the advanced options, configure the settings for the network, including security protocol and passphrase. Remember to enter the SSID of the network exactly as configured on the router.
6. Apply the settings and log out of the printer's control panel.
7. Log back into the router's control panel and re-apply the security options. Be sure that they match those match those entered for the printer.
Hopefully this will be of use to others in the same position.
Thanks again for your time.
Best,
H.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.

Unable to connect to a secure wireless network - Event ID: 8002 Task Category: AcmConnection..., Event ID: 11006, Event ID: 11006

Hi,
I have a Dell Latitude E6440 running Win 7
Enterprise 64 on a domain. It will connect to any unsecured network, and it can see the secured network in the list when I click the wireless connection icon on the system tray. When I go to manage wireless networks, the secured network does not show
up (and thus, I cannot delete the network to try to re-add it). Normally, we would add the secure network here. I click Add, give the name in the correct syntax, add the needed information (WPA/2-Enterprise, EAS or TKIP), and hit Next, it immediately returns
with "An unexpected error occurred". A similar thing happens when I hit Connect from the list of available networks that pops up when I open the system tray icon: it says it was unable to connect, when I hit troubleshoot, it says that it could not
identify the problem. The event log shows the error below. I haven't been able to find any resolutions here or elsewhere that address the fact that I can connect to unsecured wireless networks, but not secured wireless networks.
Other notable troubleshooting steps:
Uninstalled/Reinstalled wireless adapter with the latest driver
Other laptops are able to access the same secure wireless network
The first WLAN-AutoConfig error in the event log was Event ID: 12013, attempting a 802.1x authentication. Then Event ID: 11006; stating "Explicit Eap failure received". After a few days of alternating all 3 errors, they started to only error on
Event ID 8002.
Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational
Source: Microsoft-Windows-WLAN-AutoConfig
Date: 6/4/2014 11:53:55 AM
Event ID: 8002
Task Category: AcmConnection
Level: Error
Keywords: (512)
User: SYSTEM
Computer: [COMPUTERNAME.DOMAIN]
Description:
WLAN AutoConfig service failed to connect to a wireless network.
Network Adapter: Intel(R) Centrino(R) Advanced-N 6235 Interface GUID: {f27af762-dff8-4927-84e0-7f4ade30dcc9}
Connection Mode: Connection to a secure network without a profile Profile Name: [SECURE NETWORK NAME]
SSID: [SECURE NETWORK SSID]
BSS Type: Infrastructure
Failure Reason:The specific network is not available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{9580D7DD-0379-4658-9870-D5BE7D52D6DE}" />
<EventID>8002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>24010</Task>
<Opcode>191</Opcode>
<Keywords>0x8000000000000200</Keywords>
<TimeCreated SystemTime="2014-06-04T16:53:55.956762800Z" />
<EventRecordID>1475</EventRecordID>
<Correlation />
<Execution ProcessID="432" ThreadID="5348" />
<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>
<Computer>[COMPUTERNAME.DOMAIN]</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="InterfaceGuid">{F27AF762-DFF8-4927-84E0-7F4ADE30DCC9}</Data>
<Data Name="InterfaceDescription">Intel(R) Centrino(R) Advanced-N 6235</Data>
<Data Name="ConnectionMode">Connection to a secure network without a profile</Data>
<Data Name="ProfileName">[SECURE NETWORK NAME]</Data>
<Data Name="SSID">[SECURE NETWORK NAME]</Data>
<Data Name="BSSType">Infrastructure</Data>
<Data Name="FailureReason">The specific network is not available.</Data>
<Data Name="ReasonCode">163851</Data>
<Data Name="ConnectionId">0x6</Data>
</EventData>
</Event>

check this article:http://technet.microsoft.com/en-us/library/cc735927(v=ws.10).aspx
also could contact your domain administrator to ask for help.

Unable to connect to Internet after Secruity Upgrade - Any Suggestions?

Like several of the previous posts I am unable to connect to the internet. The affected computer is a G3 iMac. It is connected to a Linksys wireless access point. The Linksys wireless router is connected to my cable modem. I get a message that the Built-in Ethernet is active but: Built-in Ethernet has a self assigned IP address and you may not be able to connect to the internet. No combination of changes to the settings has had any effect. I also have tried all of the fixes in the previous posts. None of them have worked. I am not experiencing any connectivity problems with my other computers (2 PCs and 1 Macbook). Everything worked fine until that danged "security upgrade"!
Mac and PC Mac OS X (10.3.9) Win XP Pro

Visit http://www.macfixit.com/ where the have been
running articles on how to solve problems arising
from the security update.
Thank you for the link to MacFixIt. I found what I needed to correct the problem, although all of the fixes referenced computers with the AirPort card and software. I found that removing the extensions AppleAirPort2.kext and AppleAirPortFW.kext solved the problem. Everything seems to be working properly after a restart last night and an overnight shutdown.

Accessing secure sites with 3rd party router

I want to use my original router "Buffalo WBMR G54" with BT and have been for a short while but cannot access online banking or barclaycard online, works ok with home hub. Tried both firefox and IE8, pages just hangs on both browsers.
Any techies around know why this is please? My Buffalo worked fine as a 3rd party router with talktalk

wehey23 wrote:
Can you tell me how to change the MTU settings for the BT Hub pls?
I have just moved home and have taken BT BB with me.....the internet is running fine but i cant connect to secure sites at all. Have tried contacting BT and they have tried everything but cant help!
Thanks
First check your Firewall is not blocking SSL port 443.
This thread contains most of the information you may need to change you PC MTU value, I don't think the Homehub MTU value can be easily changed?
http://community.bt.com/t5/BB-in-Home/BT-Broadband-and-MTU/m-p/12660;jsessionid=F92D7A9C8D5A07CAE73C...
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Unable to connect the queue in AQ with weblogic 10G R3

I created queues, queue tables and started the queue in Oracle 10g. In weblogic, i configured staturpclass using http://www.oracle.com/technology/products/ias/oems/files/aqjmsv2.0.zip_ and weblogic able to create the JNDI names as configured in aqjms.properties file. I havent configured any JMS Foreign server or JMS Bridge. I followed the steps in http://biemond.blogspot.com/2008/11/using-aq-in-weblogic-103.html. When i started the server i am getting following error message.
<Oct 6, 2009 1:05:39 PM IST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: MessageQMDB is unable to connect to the JMS destination: ORAQ_X_QUEUE. The Error was: java.lang.NullPointerException>
ORAQ_X_QUEUE is JNDI name of AQ queue AQ.X_QUEUE.I am successfully able to enque and deque messges using Java client, but when i am trying to do the same with MDB i am getting above error message.
thanks
Nag

Hi Nag,
The best WebLogic AQ JMS integration option is the built in support provided with 10.3.1/11gR1 or later, see [ Interoperating with Oracle AQ JMS | http://download.oracle.com/docs/cd/E12839_01/web.1111/e13738/aq_jms.htm#JMSAD565 ].
If for some reason you can't use WebLogic's built in support for AQ, then it would help to see the full stack trace of your NullPointerException (we almost always need the full stack trace when trying to diagnose problems). With MDBs, the full stack trace is typically found in the WebLogic server log.
Please post any future JMS related posts to the "Weblogic Server - JMS" newsgroup.
Regards,
Tom

Unable to connect SQL server 2005 databse with JSF applications !

Hello guys!
Help me out to connect SQL server 2005 Databse with JSF applications using JDBC-ODBC bridge. I'm working with Netbeans 6.1 IDE.
I tried for the basic applications but instead got this error:
"unable to deploy jdbc drivers to the <project>domain/lib"
Please help me out with working sample codes that connects MS SQL server 2005 DB with JSF!!
Thank you guys!

1) don't use the bridge driver
2) don't do database access from JSF
3) learn how to use your application server
4) learn how to use your IDE

Unable to connect to any secure sites with any browser

Similar Messages

Maybe you are looking for