Unable to connect to app store after upgrading to ios5.1??

Have tried everything restoring, resetting, formatting!!! Rest all network related apps like safari and fb are doing fine.Only the featured page is opening in app store.top 25 n search are not!! I can connect using mobile data connections but am unable to open anything through wifi... feel like kicking myself for upgrading to ios5.1.

Thx very much....but I could open the website and the itunes store....
After I tried typing following orders in Commonds, the problem solved:
rm ~/library/preferences/com.apple.appstore.plist
rm ~/library/preferences/com.apple.storeagent.plist
rm -rf ~/library/preferences/byhost/*
hope can hlep others

Similar Messages

  • Can't connect to app store after upgrading to Mavericks

    After installing Mavericks, I can't update any of my apps, or open any previous apps. When I do try to sign in, it always says "An unknown error has occurred". I have a yahoo.com Apple ID, but even when I try signing in with a gmail.com Apple ID, I get the same error. What is going on?

    That worked gor me as well.
    Go to Library/Preferences/SystemConfiguration and then delete NetworkInterfaces.plist
    Restarting. Going to the system prefs/network - saving then launching the app store.
    Did the trick for me.

  • After updating to 10.8.1 unable to connect to App store

    Just upgraded to 10.8 on a 2011 iMac 27" and everything was fine and was able to download 10.8.1 patch. After applying 10.8.1, unable to connect to App store, but onboard network card works otherwise.
    If i disable ethernet connection and enable WiFi, I am able to reconnect to App store.
    Thumbed through other similar issues after 10.8.1 that mention DNS, but it does not apply to this situation since the WiFi is using the same DNS servers within a corporate nework.
    Thinking delete the .plis or change the network location, but was hoping there would be a better fix.

    Root cause was dhcp assigned address was being restricted. Changed IP correcting problem.

  • Unable to connect to app store and iTunes store

    so i was just casually browsinh the app store and downloading free apps when the app store suddenly stopped working
    it could not search but it shows the top rated apps
    and after a few minutes a message pops up saying "unable to connect to app store"
    i tried to use iTunes and it also did not work and showed a similar message "unable to connect to iTunes store"
    p.s. i will not update

    Everthing works now after 20 minutes
    iTunes store was probably down even though it indicates green for up

  • Cannot connect to app store after downloading mountain lion

    cannot connect to app store after installing mountain lion it says there is no network connection when there clearly is i am on the internet now and i had this problem with the bootcamp server i read that in another forum and the answer to remove the auto proxy setting was correct but not for this situation because it is allready unchecked i checked it and tried again still no connection please help .... oh and apple you are beginging to be more like windows/microsoft with all the problems

    That poor wordpress site has collapsed in exaustion from trying to keep up with the 3mil hits a day
    here is a "copied" version with credits for those looking for a solution to an annoying problem Apple should patch.  (Yes, I'm aware of the irony of that statement)
    July 18, 2012 · by Arthur Lockman · in Apple, Tutorials
    After doing a reinstall of Lion a few weeks ago, I found that my computer suddenly would reject every VeriSign certificate that it encountered. Using Chrome, that meant that I couldn’t even access Twitter.com, because it thought that the certificate was wrong. I couldn’t login to the Apple developer portal, I couldn’t authenticate a device with XCode, I couldn’t make a purchase at Apple.com, I couldn’t download updates from the Mac App Store, and I couldn’t login to Mint.com, among other sites. I essentially couldn’t do anything that used a VeriSign certificate for SSL.
    What did I do? I called my trusty AppleCare advisor, hoping for an answer. I thought that maybe they could help me figure it out. After getting to senior support, I was told to reinstall Lion, which I did to no avail. My case was then forwarded to the Apple engineering team, with 3 to 5 days to wait until I had an answer. I looked around, through my console logs and through Keychain access, and finally came up with an answer, and a solution to my problems.
    It turned out that my solution was pretty simple. I had to delete a few files and reset one to its default setting.
    Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
    Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
    Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
    Restart your system.
    This solution seemed to work just fine for me. All of my certificate problems have been fixed. It must be something with the OSX installer that causes this certificate issue. I’ll file a bug report. Hopefully someone looks into it and fixes the flaw in the OS. And, I hope that this fixed the flaw for you.
    Addendum – a note on security:
    This procedure won’t affect the security of your Mac. I’ve had some questions come in about that, and if anything, it makes it more secure because then sites that require SSL certificates can actually use them, unlike before where they might default to non secure connections because the certificate was bad.

  • I am unable to connect to app store today.i dont know why

    I am unable to connect to app store today please help
    Me

    The App store has been subject updating this morning.   There should be an announcement on the lead page with timings for various countries.

  • I can't connect to App Store after iOS 7 upgrade, I can't connect to App Store after iOS 7 upgrade

    I can't connect to the App Store after iOS 7 upgrade

    I could always connect, but I couldn't search for anything.
    Just tried the steps in this thread:
    Log out (Settings > iTunes & App Store) then did a hard reset (Home and Power button) then signed back in.
    That worked for me.

  • Macbook pro6,2 unable to connect to app store for software update

    Purchased a used macbook pro6,2. When I ask the macbook to update software, the can't connect on app store page comes up. I can connect to iTunes.

    Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
    The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
    How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1. If you don't own another Mac
    a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    2. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    3. Partition and install OS X
    a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    c. An unusual problem may arise if all the following conditions apply:
              OS X 10.7 or later was installed by the previous owner
              The startup volume was encrypted with FileVault
              You're booted in Recovery mode (that is, not from a 10.6 installation disc)
    In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
    d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    4. Other issues
    a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • Hi all. I have upgraded to 10.6.8 Snow Leopard on my Mac Pro but still cannot connect to App store  to upgrade to Mountain Lion. Any advice?

    Hi all, I have upgraded to 10.6.8 Snow leopard on my Mac Pro but still cannot connect to App store.  I want to connect to upgrade to Mountain Lion but ony get the message "you are not connected to App store"  or "Check your internet connections, error -52". My internet is working OK for everything else.Any advice?

    Then I will have to assume a faulty installation.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Mac OS X 10.6.8 Update Combo v1.1.

  • Cannot access App Store after upgrading to Mountain Lion

    Hi all - hope someone can help. I have a new Macbook Air and upgraded recently to Mountain Lion. Since then I cannot access the App Store. Error message is
    'Cannot verify a secure connection to App Store, continue? ' If I continue a series of flashing pages occurs. I have tried changing the date as some responses suggest but nothing seems to work. I would be so grateful to fix this as I am keen to download final cut pro x to my new machine.
    All help gratefully received

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • I phone says ,  unable to connect to App store

    I Phone says unable to connect to app store

    Hi kirkfromtucson,
    Thanks for visiting Apple Support Communities.
    If you are not able to connect to the App Store on your iPhone, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store - Apple Support
    All the best,
    Jeremy

  • No app store after upgraded iPhone 4 to ios5. Can't sync apps in iTunes

    App Store not appearing on iPhone after upgrading to iOS5. Not able to select 'sync apps' in iTunes while iPhone is displayed & all other tabs able to be modified.

    Okay, so I tried something different... I deleted all of the music from itunes (but not the files themselves), then copied my entire music libray to a new folder, then reset the "sync history". I imported all of the music from the new location into itunes, then dragged it onto the iphone. I then got the message:
    "are you sure that you want to replace all of the songs on the iphone "xxxxx" with songs from this library?"
    I clicked "replace songs", but still, nothing transfered.

  • IPhone 4S Won't Connect to App Store After iOS 6 Update!

    After a long wait for the new iOS update when I enter the "App Store" there is a box that pops up saying that I can't connect to "App Store," that even happens while I'm connected to WIFI... Although I still can connect to "iTunes" music store!

    Reset your iPhone.  Hold Sleep Key and Home Key together for more than 15 sec.  Now try your App Store again.

  • Unable to connect to app store

    Hello.  I have been unable to access the app store on my iPhone for the past 3 days.  Each time I try to update or purchase something, I get this message: "cannot connect to the iTunes store:  cancel of retry. ". Any suggestions?

    Done that. Didnt work - Also tried updating DNS on my Router.
    Do you know an IP or address i can tracert to make sure its not my connection ?
    Ive restored ipod to original settings and still not working.

  • On Mac notebook unable to connect to App store from icon or IPhoto

    Cannot connect to App store from iPhoto or icon on toolbar. Any suggestions. Also, cannot sign-in to Mobile me. Password updated on iCloud. Old and new PW do not work??

    Hi Cwhited,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    - Judy

Maybe you are looking for

  • How can I change the report file name depending on which seq file is run in the main seq?

    I'm using TestStand 3.0. I have a main sequence file with a menu option to select one of several sequence files to run. How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name? Thanks H

  • Error while loading a String on a TextField

    Hi, I have a TextField set for Numeric values, now when I do setString () and pass a number as String it gives an error,. It works perfectly on a emulator but on the real device it gives a exception. I dont know the stacktrace beause I dont know how

  • How to change country of my bank card

    The apple account of mine was firstly created by using UK bank card. Now I am in Russia and I can`t find how to change the country of my bank card when I am trying to purchase products from itunes store. All my devises are changed to Russia, moreover

  • Inspection Lot creation for the 103 movement type

    <<Don't ask for or offer points>> Dear Experts, we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node   Quality Management --> Quali

  • Problem in HTML parsing

    I am trying to parse the HTML, and for a HTML code like this <span class="authorName">Steve </span> I want to retrieve the value "Steve" Right now, I am using a parser, to generate the HTML tree and by using the this code.. Tidy tidy = new Tidy(); ti