Unable to connect to bose system

New Iphone 5 unable to connect to car phone or bose system, no problems with Iphone 3g.

Thank you! It worked!!

Similar Messages

HTTP Response :500 unable to connect to remote system.

Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.

Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh

Unable to connect to BI System from Visual Composer

Hie there,
I am unable to connect to my BI system from Visual Composer
The error message which I obtain upon clicking on 'Find Data' and selecting one of the many Systems list are as follows :-
Error - 30014 Search returned an erro Failed to conect to backend system. Check your system defination and user priveleges.
Please advice how can I add a BI System to this Visual Composer
p/s: I`m new to portal environment, hence please excuse my rudimentary question

Hi John,
you find some information under:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm</a>
I had a similar question as a comment for my blog here:
<a href="/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i:///people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
You should also look in the VC wiki, there is a section for the connectivity
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
Hope that helps!
Best Regards,
Marcel

Unable to connect to ECC system through stand alone JAVA program using JCO.

Hi All,
I want to connect to ECC system through standalone JAVA program using jco.while executing my java program it is saying that connection refused.
I am getting the error as shown below.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CMALLC : rc=20 > Co
nnect from SAP gateway to RFC server failed
Connect_PM GWHOST=192.168.10.99, GWSERV=sapgw01, SYSNR=01
LOCATION    SAP-Gateway on host igm501 / sapgw01
ERROR       partner '192.168.10.99:sapgw01' not reached
TIME        Mon Sep 1 15:00:37 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2821
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       239
ERRNO TEXT Connection refused
COUNTER     2
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:11
25)
        at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
        at JConnector_frmDesk.<init>(JConnector_frmDesk.java:91)
        at JConnector_frmDesk.main(JConnector_frmDesk.java:141)
I have already configured SAPDP01,SAPGW01 in my services file in windows\system32\drivers\etc\services.
What else i need to do to connect to ECC system through my JAVA program.Please help me in this regard.
Regards,
Ramana.

Hi !
Check this to verify that you are correctly using JCO:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
Try to give in ashost="/H/saprouter/H/sap".
Regards,
Matias.

Unable to connect to Hospital system. The system redirects to an agreement page but ny computer just says I am not connected to the internet. Any ideas?

I am a regular patient at a local hospital that provides free internet access to patients AFTER they accept terms and conditions. I have had no problems until recently when instead of redirecting to the systems acceptance page, I started getting a message that I was not conected to thye internet.
This began about 4 weeks ago and continues. I do not have redirect blocked and have tried Safari, Firefox and Google Chrome to no avail. Please give me some ideas.
Thanks,
Jim

Contact the hospital IT staff and ask them if they are using ActiveX. If they are, that's not 100% accessible and against section 508 accessibility guidelines. They should use http://www.anybrowser.org/ as a guide for a platform agnostic website.

Unable to connect to local host

Hi,
I have 64 bit operating system and got installed SQL Server Management Studio of 64 bit and the problem I am facing is unable to connect to local host, I have database mdf/ldf files in my local system and unable to connect to local system
tried localname/SQLEXPRESS and it did not work.

SQL Server Management Studio is not enough, you also need to install SQL Server instance.
http://www.orcsweb.com/blog/mark-newnam/how-to-install-sql-server-2012-express-edition/
Keerthi Deep | Blog SQLServerF1 |
Facebook

Unable to open RFC connection to SAP System NSP

Hi all,
During installation i am getting an error which is as follows,
"Unable to open RFC connection to SAP System NSP.
Solution: Start the system."
And the second problem is that there are no connections shown in SAPGUI.
Please help me out.
Thanking you,
Kranthi

HI Kranthi,
Have you checked this thread NW Preview Installation error?
Regards

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

Warning System spameater Unable to connect to Cisco Web Security Service.; URL Filter...

My C670 ESA's have been throwing these alerts intermittently for the past few days, anyone else seeing them?
The Warning message is:
Unable to connect to Cisco Web Security Service.
URL Filtering will not work correctly.
Please verify all network, proxy and firewall settings.
Connection to "v2.sds.cisco.com" failed.
The last error seen on this connection: "Request failed with code: 28 (Connection time-out)"
Version: 8.5.6-092
Looks like it is open on port 443 and currently up. Hitting it with a browser gives me:
https://v2.sds.cisco.com/
After an error or two they go away and appear OK.
Checking the logs I don't see a way to verify URL lookups are working, is there a way?
Also, I setup URL filtering six months ago and had it set to only trigger on (-10)-(-9.5) and saw about an 80% false positive. It has improved over the past six months drastically but still catching mostly advertising URLs and allowing all phishing URLs right through. I've yet to see it block a phishing URL.
Jason

After lots of trial and error, I was able to eliminate this problem. What I wound up doing is defining the XE service again in the listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = XE)
      (ORACLE_HOME = C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server)
I know that typically you should not have to do this, especially since I already had defined DEFAULT_SERIVCE_LISTENER = (XE) at the bottom of the listener.ora file. Explicitly defining the XE service in the listener.ora file allows the listener to find it while the system is running under the Cisco AnyConnect VPN. The only hiccup I found by doing this is that the XE service is discovered twice by the listener when the system is NOT running under the Cisco AnyConnect VPN. It still works OK. The listener just seems to ignore the repeated definition of the XE service (see output below):
C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server\bin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-JUN-2013 10:03:15
.......(omitted output).......
Service "XE" has 2 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0 state:ready
         LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: DEV-M-137GF, pid: 5544>
(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=58257))
The command completed successfully
If anyone has a cleaner solution for this problem, please let me know. Otherwise, I am moving forward with what I did.
Thanks.....Paul

Connect apple tv to a Bose system, Connect apple tv to a Bose system

I have a Bose acoustimass 5 seriesIII system. Does anyone know or can anyone suggest how it could be connected to this system?

Welcome to the Apple Community.
If your sound system has an optical input, the easiest way is just to connect it to the optical output on the Apple TV.

Need help with Apple TV connected to a Bose system

I have a new Apple TV that I have installed with a Bose Lifestyle 28 home theater system connected by an optical cable. The TV is also connected to a Directv box with the Directv box being connected to the Bose system via an Optical cable. I get Dolby 5.1 when watching the Directv but when I put a movie from Netflix on the Apple TV, I get a message on the Bose: PCM 2.0. Does anyone have any ideas as to why I don't get Dolby 5.1 on this setup?

DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

I am unable to connect to the itunes store. I have tried via wifi and cellular. Operating system and itunes are latest versions. Have powered down the ipad and restored settings. Can puchase new songs and apps with no problem....just can't update apps.

I am unable to connect to the itunes store to update apps on my ipad.
I have tried both wifi and cellular connections.
I have the most recent updates of the operating system and itunes.
I have powered down and reset and restored.
I have no problem purchasing and downloading new apps or songs.
Please help!

Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

Since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?

since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?

While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Error: unable to connect to database using user system. please check privil

Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
Raja

Did you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai.

Unable to connect to bose system

Similar Messages

Maybe you are looking for