Unable to connect to Buffalo NAS Server from Lion iMac.

Message is: The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

Similar Messages

  • Unable to connect to the Essbase server from Admin console

    Hi,
    I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
    The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
    But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
    "Unable to connect to the Essbase server please check the user name & password"
    username: admin
    password; password.
    i tried several times...but its not working.
    Please advise me.
    FYI, The admin server service is started already.

    Hi Subrahmanyam,
    Here , there are 2 things
    1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
    admin
    password
    2. After you are connected to the console i.e admin console .
    You see
    enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
    This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
    So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
    In step 1-> to connect to console , use 'admin' 'password'
    In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
    Hope this clarifies you, as this is a lil confusion to many
    Sandeep Reddy Enti
    HCC
    http://analytiks.blogspot.com

  • Unable to connect to the report server from FORM in 10g

    Just I start to create Forms and Reports .
    Final step I try to put Button in Form Report to call Report but this job I have not do it before just I try it by my seftstudy to do.
    However, i get message error i will show you to see which mistake i have done.
    this picture error message:
    http://img136.imageshack.us/img136/5830/errr11ex.gif
    this picture paht of Report after import it in Form builder:
    http://img146.imageshack.us/img146/4381/tree9eb.gif
    this picture show the setting of properties in Report:
    http://img501.imageshack.us/img501/3999/agent4nz.gif
    this is my code :
    declare
    report_id report_object;
    report_message varchar2(1000);
    p_id paramlist;
    v_rep VARCHAR2(100);
    begin
    report_id:=find_report_object('agent');
    v_rep := RUN_REPORT_OBJECT(report_id);
    report_message := run_report_object(report_id , p_id);
    web.show_document('http://orcl:8889/reports/rwservlet/getjobid'|| substr(report_message, length('svr')+2)||'?server=svr');
    end;
    Can any one try to tell me what the mistake in my code and how to solve it?
    My best regards;
    Message was edited by:
    ExplOrer

    Hello !
    You can try to use only the web.show_document call
    WEB.SHOW_DOCUMENT('/reports/rwservlet?report=agent.rdf&destype=cache&desformat=htmlcss&server=srv&userid=you have to enter your username/passwort@database net name here,'_blank');
    Have you defined the path for the stored reports ?
    Try to locate the registy key REPORTS_PATH in the registry and add the root C:\project\reports . to the key
    Katharina

  • Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

    We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
    We have a different (DEV) Server (windows 2000)  where a SQL Server 2000 instance is present.
    When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
    the same server from my local machine which has windows 7 and SQL 2012 installed). 
    This is the error i see - 
    "A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
    is no longer available.) (.Net SqlClient Data Provider)"
    When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
    error - 
    An OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "[DBNETLIB][ConnectionRead
    (recv()).]General network error. Check your network documentation.".
    The same SSIS package runs successfully from my local machine.
    Please, could someone advice how to resolve this situation?

    Thanks Olaf.
    Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
    Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
    I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

  • BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

    Hello Experts,
    I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
    I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
    Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
    But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
    Database error: Unable to connect to SAP BW server Incomplete logon data -
    If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
    I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
    Desired outcome:
    I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
    Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
    Any help in this matter would be greatly appreciated.
    Thanks & regards,
    CD.

    Whether your problem is solved?
    We have the same problem in BO Mobile.
    Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

  • Mountain lion 10.8.2 can not connect to windows NAS server Dell Sentinel

    I recently upgraded to 10.8 OS My office is connected to a NAS server Dell Sentinel WD4000. Everything was working fine until the upgrade from 10.7 to 10.8 Now when I "connect to server" Not one of my accounts can connect. All I get is wrong password. The server connects to every computer on the network except the 10.8 The server shows up as an icon on Shared Devices.
    Someone please help me. Apple has been useless.

    I hope this helps.  But, Apple has confirmed a significant bug in 10.7.4 that breaks SMB.  Their support says they are working on it, but they do not know when the fix will be released.  It has broken SMB at all sites I support including my own location where Lion server has the updated version as well.  Only AFP works but not consistently.  The suggestion is to restore 10.7.3 from a backup or wait until the fix is released.  SMB does work - but only when admin authentication is used on Mac servers - don't know about Windows Servers.  I do know the client side of Mac's also are affected with SMB issues.  Good luck!

  • SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

    We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
    sharepoint mode).
    I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE.   For reference, I have 1 WFE and 2 App Servers.  the WFE has the Reporting Service Add-in and both App Servers have
    the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
    I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
    It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed.  I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is.  Still can't
    find it anywhere.  None of the Reporting commandlets are helping.
    Technically what is occurring;
    Add Reporting service content types and create a New Reporting Data Source through UI
    ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
    Exception occurs after some time because it times out trying to connect to wrong host.  Exception below:
    Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
    -- End of inner exception stack trace ---
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
    at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
    No powershell commands or any of the settings in the service application allow me to set this.  Any help would be appreciated.
    20 Bay Windows Home Server (Not Vail!)
    http://piroozjavan.blogspot.com/

    Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names

    I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names.  I can still connect to iTunes store and I can still summit track names to the CDDB server.  I just cant recive the names from the CD's.  I read this problem on the community and I've checked that the  proxy server from Lan is unchecked.  I use a verizon wireless card for my internet if that matters.

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

  • Unable to connect to SAPNet message server

    Hi,
    after starting the SAProuter, i have to check if i am able to connect to SAPNet message server.
    Here is the message delivered after configuring technical parameters:
    Unable to connect to SAPNet message server
    Is the problem coming from the saprouttab file?
    Here is my configuration of my saprouttab file :
    KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <SAProuter's Server IP Adress> <Port Number>
    KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
    P <SAProuter's Server IP Adress> 194.39.131.34 3299
    D * * *
    Thanks for your help.
    Pascal.

    Hi,
    yes when i go to
    start -> run -> drivers -> etc -> hosts file and i add the command that you suggested to me.
    Here is the log file content :
    Fri Mar 21 10:55:17 2008 INIT LOGFILE
    Fri Mar 21 10:55:17 2008 READ ROUTTAB ./saprouttab o.k.
    Edit :
    when i run only those command from the saprouttab fil:
    P * sapserv2 sapdp99
    P sapserv2 <solution manager IP adress>
    and after running the SAProuter, it seems to recognize sapserv2 but still have the problem with sapdp99.
    Do i have to add sapdp99 with its 3299 port number in the hosts file?
    trc file: "dev_rout", trc level: 1, release: "700"
    Fri Mar 21 11:01:29 2008
    SAP Network Interface Router, Version 38.10
    command line arg 0:     saprouter
    command line arg 1:     -r
    command line arg 2:     -S
    command line arg 3:     3299
    command line arg 4:     -G
    command line arg 5:     saprouter.log
    command line arg 6:     -K
    command line arg 7:     p:<Distinguished Name>
    SncInit(): Initializing Secure Network Communication (SNC)
          PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
    SncInit(): Trying environment variable SNC_LIB as a
          gssapi library name: "E:\usr\sap\saprouter\sapcrypto.dll".
      File "E:\usr\sap\saprouter\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
      The internal Adapter for the loaded GSS-API mechanism identifies as:
      Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
    main: pid = 3860, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
    reading routtab: './saprouttab'
    ***LOG Q0I=> NiPGetServByName: service 'sapdp99' not found: getservbyname [ninti.c 489]
    ERROR => service 'sapdp99' unknown, skip line 29 [nirout.cpp   7923]
    Edited by: Franu00E7ois-Xavier LEVY on Mar 21, 2008 11:02 AM

  • AzCopy worked, suddenly stopped working, unable to connect to the remote server

    AzCopy was working fine, I was transferring about 670 files to my Azure Files storage account on "https://blah.file.core.windows.net/myshare" (that's not the real account), then it stopped after about 400 files.
    Now it continually gives the error "Error parsing destination location
    https://blah.file.core.windows.net/myshare: Unable to connect to the remote server."
    However it works from a different computer with a completely different IP address in another part of the country.
    I am 100% sure my azcopy command is correct, because it worked for about 400 files then stopped, and the exact same command no longer works.  I have tried it with both the primary and secondary keys.  I've uninstalled and reinstalled azcopy 4.1
    and that doesn't help.
    Is Azure blocking IPs somehow?  What could be wrong?

    Hi,
    I am glad to hear that you have solved your issue, thanks for posting, if you have any difficulty in future, we welcome you to post in forums again.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Server cleanup wizard problem - unable to connect to the WSUS Server Database.

    I'm trying to run server cleanup wizard.. it starts to run and then after a while it gives me this error:
    The WSUS administration console was unable to connect to the WSUS Server Database.
    Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
    System.Data.SqlClient.SqlException -- Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    The statement has been terminated.
    Source
    .Net SqlClient Data Provider
    Stack Trace:
       at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.InitializeDerivedProperties()
       at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.get_NewUpdatesCount()
       at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetSyncInfoRow(WsusSynchronizationInfo syncInfo)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetListRows()
    Thanks

     Some questions:
    Are there any other databases running on this Std Edition SQL service?
    [a] Yes there are, we have Kaspersky enterprise DB, Report Server DB and local application DB.
    Are there any other services running on this WSUS Server?
    [b] Yes there are, we have Active Directory, Kaspersky enterprise, SQL Server 2005, and WSUS all on the same server.
    How many days since your WSUS server was first installed?
    [c] It's been about a year now.
    What is the physical size of the SUSDB.mdf file?
    [d] 9,666,752 KB
    What is the hardware configuration of this machine, including disk drives?
    [e] Intel Xeon 1.86, 2GB Ram, HD C: 39GB - E: 25.2, running Windows Server 2003 R2 SP2.
    How many client systems are you servicing from this WSUS Server?
    [f] Around 40.
    What products/classifications are you synchronizing.
    [g] Windows XP-vista, Windows Server 2003, Office 2003-2007, SQL Server 2005.
    Okay, for starters, you have an underpowered/overextended machine running Active Directory, ASP.NET, and a database server, all on a sub 2GHz CPU with 2GB RAM, and not enough disk spindles. The machine has had WSUS running for about a year and is 9GB in size.
    There's no doubt in my mind that some of your performance issues are directly related to disk and database fragmentation.
    There's also no doubt that some of your performance issues are directly related to memory starvation.
    I'd suggest the following long-term fixes:
    1. Get a second machine. Make it a dedicated database server. Provision it accordingly to support servicing multiple database applications.
    2. Lacking #1, this machine needs more memory. It also needs more disk spindles. At a minimum the databases being serviced should be on a dedicated physical drive; ideally there would be two dedicated drives allocated for supporting database services. The
    For the short-term fixes, do this:
    1. During after-hours time, if you don't already have one, build a temporary machine that can act as a DC/GC, while you take this machine temporarily offline.
    1. Shutdown the Update Services service, SQL Server database engine, and any other services dependent on the SQL Server database engine (Kapersky, and other reporting applications). Disconnect from the network to temporarly eliminate DC traffic. (You could also shutdown the AD services, but disconnecting the network cable is ever-so-much easier.) Defragment ALL drives.
    2. Restart ONLY the SQL Server service. Obtain this SQL script to Reindex the WSUS Databases.
    3. Restart ONLY the Update Services service. Attempt the Server Cleanup Wizard again. Run it in two passes. Pass 1 performing everything except  remove unused updates. Pass 2 running only remove unused updates.
    4. After completion of the Server Cleanup Wizard, reconnect the machine to the network and resume all other services.
    5. If you're able to complete #3, secure the services of a well-qualified DBA to determine if there are any misconfigurations in your SQL Server setup that would account for why your WSUS database is 9GB in size -- such as improperly configured autogrowth parameters. Based on the products you're updating and only forty clients, 9GB is about 3x the maximum size I would expect to see in a WSUS database. It's possible this is simply caused by excess unused updates, it's possible it's caused by fragmentation, it's probable it was caused by unnecessary autogrowth of the database due to insufficient update maintenance. You'll want a DBA to assist you in shrinking that database after you successfully run the Database Maintenance and Server Cleanup Wizard.
    Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
    Principal/CTO, Onsite Technology Solutions, Houston, Texas
    Microsoft MVP - Software Distribution (2005-2009)

  • Unable to connect to the report server

    I have a problem with run_report_object to call a report within a form. I am using 9ias Rel 2 and report server on the same machine. The test.rdf report can be executed using the URL in the browser.
    I get the "Unable to connect to the report server" when I use the run_report_object in a form. Is it a configuration problem or is the code incorrrect?
    My code is as follows:
    Declare
    repid report_object;
    report_job_id VARCHAR2(200);
    PL_ID PARAMLIST;
    rep_status varchar2(100);
    Begin
    repid := FIND_REPORT_OBJECT('OP201P');
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT,'pdf');
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'repsrv');
    PL_ID := CREATE_PARAMETER_LIST('TEMP');
    ADD_PARAMETER(pl_id, 'p_ref1', TEXT_PARAMETER,:toolbar.ref1 );
    ADD_PARAMETER(pl_id, 'p_ref2', TEXT_PARAMETER,:toolbar.ref2 );
    ADD_PARAMETER(pl_id, 'p_sort', TEXT_PARAMETER,:toolbar.p_sort );
    report_job_id := RUN_REPORT_OBJECT(repid, pl_id);
    rep_status := REPORT_OBJECT_STATUS(report_job_id);
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
    rep_status := REPORT_OBJECT_STATUS(report_job_id);
    END LOOP;
    IF rep_status = 'FINISHED' THEN
    Web.show_document('http://portal.domain_name.com:7778/getjobid='||
    substr(report_job_id,9) || '?server=repsrv', '_blank');
    ELSE
    message('Report failed with error message '|| rep_status);
    END IF;
    end;
    For the show_document, I have tried both ' .. getjobid='|| substr(report_job_id,9)' and
    ' .. getjobid'|| substr(report_job_id,9)' .
    Any help would be greatly appreciated.
    Thank You.
    Rgds
    Edwin

    Hi ,
    Did you check if TCP/IP is enabled for the SQL Server service.
    If Disable you may need to enable it.
    To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
    1) Start SQL Server Configuration Manager.
    2) Expand SQL Server Network Configuration.
    3) Select Protocols for MSSQLSERVER.
    4) Right-click TCP/IP, and select Enable.
    5) Select SQL Server Services.
    6) Right-click SQL Server (MSSQLSERVER), and select Restart.
    Also Check the below link.
    Hi ,
    Did you check if TCP/IP is enabled for the SQL Server service.
    If Disable you may need to enable it.
    To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
    1) Start SQL Server Configuration Manager.
    2) Expand SQL Server Network Configuration.
    3) Select Protocols for MSSQLSERVER.
    4) Right-click TCP/IP, and select Enable.
    5) Select SQL Server Services.
    6) Right-click SQL Server (MSSQLSERVER), and select Restart.
    Also Check the below link if doesn't work from above.
    http://msdn.microsoft.com/en-us/library/ms365170.aspx
    Regards, PS

  • We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

    We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means  

    Hello,
    Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
    For example:
    Report server:http://uebi.cloudapp.net/reportserver
    Report manager:http://uebi.cloudapp.net/reports
    If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a  virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
    on port 80.
    Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Connecting to network SQL Server from SQL Developer

    Hi All,
    I am trying to connect to network SQL Server from SQLDeveloper but I am unable to connect( I am getting could not connect to SQL Server...). I have searched many sites but could not find the solution. I am giving HostName as MachineName\InstanceName and keeping the port as 1433.
    Can anyone explain how that connection string should be given.
    Thanks.

    From help with additional comments
    Host Name: Host system for the Microsoft SQL Server or Sybase Adaptive Server database.
    E.g., sybase.myCompany.org (DNS name or IP address)
    Port: TCP/IP Port on which Microsoft SQL Server or Sybase Adaptive Server will listen.
    As mentioned by others, need to know how server is configured. Common values: 1433, 5000
    Retrieve Database: Name of the Microsoft SQL Server or Sybase Adaptive Server database.
    Once the other data is correct, press this to populate list box and select which database you want associated with this connection. E.g., pixar, pubs2, etc.
    Brian Jeffries
    SQL Developer Team

Maybe you are looking for