Unable to connect to BW3.5(IDES) from EP6.0

Hi All,
I am trying to establish connection to our BW system (IDES, BW3.5 NW04) from EP6.0.9. I have done the following as per procedure.
- Creating BW system
- Setting Usermgmt (UIDPW and admin, user)
- User mapping also done
Connection tests for connector works fine but fails for WAS.
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname
(bwserver.<xxx>.com:8001)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
P.S: I have verified the WAS hostname and port from the 'sicm' tcode.
WAS PATH: /sap/bw/bex
Can someone please tell me where it went wrong?
Thanks
Sathish

Hi Sathish
when u perform WAS Connection test than it's perform both
http and http/s connection to WAS it's only give u that
HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined
becoz u did not use HTTPS protocol for WAS
don't worry about that. if the connection test perform HTTP/S connection than it's always failed. ( u don't use HTTPS protocol for WAS)
further look at following.
http://help.sap.com/saphelp_nw04/helpdata/en/aa/a11a39391f4f11b54e33bc92476686/frameset.htm
regards,
kaushal

Similar Messages

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

Hey everybody Amazon.com works perfectly and no problems so Bye, Bye Itunes fix your junk *** program and ****** customer service telling me it's my computer and connection. Oh is that also why my phone can't download them either on a seperate cell network. Nice try garbage In the time it took for them to run me around i downloaded the songs i needed via Amazon.

Unable to connect to SharePoint list data from PowerPivot in Excel

Hi,
I have the PowerPivot excel add-in installed and I can connect successfully to SQL data. I have two SharePoint farms - Farm 1 and Farm 2.
I am able to connect PowerPivot to SharePoint lists in multiple web applications in Farm 1 by using the ListData.svc.
e.g. https://farm1/_vti_bin/ListData.svc/Tasks
In Farm 2 I am unable to connect to SharePoint data. I have tried multiple web applications on Farm 2 and can't connect. I receive the following error. I am able to browse to the address in Internet Explorer and see a feed.
Has anyone else had this error?
Thanks in advance,
Mark
Error Message:
============================
Cannot connect to the specified feed. Verify the connection and try again. Reason: The underlying connection was closed: An unexpected error occurred on a receive..
============================
Call Stack:
============================
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.UpdateDataFeedParameters(ConnectionStringBuilder connBuilder, IDataSource dataSource, Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.GetCurrentConnectionString(Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.ClickTestConnection(Object progressControl)
============================

Hi Millard1,
From your descripton, it seems you want to use SharePoint list as a data souce. If so, you should export the SharePoint as data feed in your SharePoint site, and then create a new PowerPivot table that contains the list. Here are some articles for your reference,
please see:
Use Data Feeds (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210625.aspx#sharepointlist
Using a SharePoint list as a data source:
http://powerpivotgeek.com/2010/10/28/using-a-sharepoint-list-as-a-data-source/
Regards,
Bin Long
TechNet Community Support

Unable to connect to my home PC from my home Mac using Windows Remote Desktop

i have downloaded from the Microsoft website and also the Application from the App store and both fail to connect. i have connected to my PC using the migration assistant so they are able to recognise each other.
on the Mac:
- downloaded the app and also done the download from MS website - both fail and suggest to check that remote access is enabled.
on the PC:
- have my Ipaddress from "IPConfig"
- have enabled remote access through windows firewall
The PC is on and has a password enabled
Error on App:
"Unable to connect to remote PC. Please verify remote desktop is enabled, the remote pc is turned on and available on the network and try again"
both are connected to the internet and on the same home network. Can anyone please advise to any additional steps as this seems as though this should be really straightforward. as another note i don't have another firewall software interrupting - am just
using windows firewall until i can get this working.

Hi,
Firstly, please refer to the article below to enable remote desktop connection on your Windows 7.
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-7
On your Mac, you can download the app here.
https://itunes.apple.com/hk/app/microsoft-remote-desktop/id715768417?mt=12
More information:
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Hope this helps.
Jeremy Wu
TechNet Community Support

Unable to connect to database when running from JDeveloper

Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)

Hi,
this question is best answered on the Reports forum
Reports
Frank

Unable to connect to the Essbase server from Admin console

Hi,
I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
"Unable to connect to the Essbase server please check the user name & password"
username: admin
password; password.
i tried several times...but its not working.
Please advise me.
FYI, The admin server service is started already.

Hi Subrahmanyam,
Here , there are 2 things
1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
admin
password
2. After you are connected to the console i.e admin console .
You see
enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
In step 1-> to connect to console , use 'admin' 'password'
In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
Hope this clarifies you, as this is a lil confusion to many
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Unable to connect to p2p multicast stream from external access

Hi
I have been tasked with creating a stream using p2p multicast.
I have been able to create and connect to the stream locally, however when I try to connect from a external connection I get a message from flash player
"We are unable to connect to the network. We apologize for the inconvenience"
On looking at the logs for the external connection I find that the session is pending, where as on when I connect locally the session is pending then connect session and streams.
I have looked at some of the posting here and not found the answer.
Host machine server 2003 is on host.domain.local
External ip address has a domain name pointing to it
Delivery html page
Local server is in DMZ for debugging, this should rule out any firewall issues
Flash Player 10.3
I have set connections to allow all on FMS and Apache and have no problems accessing web server, FMS admin and I can stream vod's without any problems.
In order to deliver stream I am using a html page, which is setup using flashplayer setup this generates the stream information to be pasted into the html and works locally. When I setup using external domain name I get the above message.
Multicast Config Tool is set to external domain name
On searching for an answer I have come across cross domains, could this be what the issue is, if not any suggestions?

No, the files are not on windows or on HD. I moved the files i.e. cut and paste from the HD connected on Win and directly copied them to MAC as the HD was not readable on MAC.
I notice that the files and folders were there but they were grayed out, but when I copied them to new folder on MAC and did UNDO they disappeared.
I assume they are somewhere on the MAC drive as I haven't moved anything to Trash and not yet emptied the trash once since I got this MAC.

Unable to connect to SMC Client system from SMC Server System

hi,
i have installed SMC 3.6.1. on Solaris 10 OS . The SMC agents are installed are all system but SMC Server is unable to communicate with Client systems. SMC Server System can Ping and Telnet all the SMC Client systems , but unable to connect from SMC .
Please guide how can resolve this problem
best regards,
Adeel Mehmood

Hi Adeel,
i have installed SMC 3.6.1. on Solaris 10 OS . The
SMC agents are installed are all system but SMC
Server is unable to communicate with Client systems.
SMC Server System can Ping and Telnet all the SMC
Client systems , but unable to connect from SMC .
Please guide how can resolve this problemSo, you can login to SunMC, but you're unable to make an icon for any of your Agents? Or you have icons you made bofre but when you click on them now you get errors?
If these are new Agents, do they have more than one netowrk interface? If so, they may have security information for the "other" network (the one the SunMC Server's not on). You can try manully specifying the correct network for one Agent and see if it helps:
http://forums.halcyoninc.com/showthread.php?t=2
Regards,
[email protected]
http://www.HalcyonInc.com
!! New !! : http://forums.HalcyonInc.com

Unable to connect to Wi-Fi away from home

My iPhone 5 refuses to connect to any Wi-Fi network while I'm away from home. I'm able to connect to and use my home Wi-Fi network without any problems. However, when I'm at Starbucks, traveling, work, etc., I'm unable to connect to any Wi-Fi network. I've taken the following troubleshooting steps without success:
1) Initially, I reset network settings thinking this would be a quick fix. No success.
2) I then deleted all backups on iCloud (to rule out a corrupt backup being the cause, performed a new backup to iCloud, and then performed a deep restore to iOS 7.1.1 via iTunes recovery mode.
I'm still unable to connect to any Wi-Fi network besides my home network. Any advice on how to remedy this would be greatly appreciated. Thanks in advance.

I'm able to see the available networks, but after selecting the appropriate network, my iPhone fails to connect. I read somewhere that toggling Airplane mode may fix the problem I'm having. I have since tried that to no avail.

Unable to Connect to Project Server 2013 from Project 2013

Hello,
I'm trying to connect to Project Server 2013 from Project 2013 but it is not working.
I'm able to connect to the PWA from IE 10 on Windows 8 Enterprise
On Project 2013, I configured account to connect to Project Server 2013 and I checked the "Log on to Project Server from Project Professional" global permission and it is on.
Any idea why it is not connecting?

So you are using Project Online and not Project Server 2013? Can other users access Project Online from Project Pro successfully in your organisation? If it was an authentication issue, Project would prompt for credentials.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
We have a different (DEV) Server (windows 2000) where a SQL Server 2000 instance is present.
When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
the same server from my local machine which has windows 7 and SQL 2012 installed).
This is the error i see -
"A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.) (.Net SqlClient Data Provider)"
When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
error -
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead
(recv()).]General network error. Check your network documentation.".
The same SSIS package runs successfully from my local machine.
Please, could someone advice how to resolve this situation?

Thanks Olaf.
Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

Unable to Connect to Oracle 10gR1 database from JDeveloper 11g using OCI

We are migrating our application from OC4J to Weblogic server. As a part, I am trying to create a database connection in JDeveloper 11g (11.1.1.3.0 - Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660) to Oracle 10gR1 database. Previously I had Oracle 10g Client installed in the machine. Created a database connection using OCI driver and when I try to test connect, I got "Test Failed: no ocijdbc11 in java.library.path". I searched through Metalink and forums and one suggestion was to install Oracle 11g Client on the machine where Jdeveloper 11g is installed. I installed 11g R1 client and tried the same test connection using OCI driver. Now I am getting "Test failed: ORA-12705: Cannot access NLS data files or invalid environment specified" error.
The same database connection works good with Thin driver with both Oracle 10g client and 11gR1 client.
Previously I had Jdeveloper 10.1.3.2 and Oracle 10g Client and I was able to connect to database without any errors.
Could you provide me the steps for this or if I missed any steps?
Steps to Replicate:
For the error: no ocijdbc11 in java.library.path
1) Install JDeveloper 11g (With embedded Weblogic Server)
2) Install Oracle 10g Client on the same machine
3) Create a database connection in the "Application Resources --> Connection"
4) Use OCI driver. Enter the host details about the Oracle 10g R1 database
5) Test connect to the database.
ORA-12705: Cannot access NLS data files or invalid environment specified
1) Install JDeveloper 11g (With embedded Weblogic Server)
2) Install Oracle 11gR1 Client on the same machine
3) Create a database connection in the "Application Resources --> Connection"
4) Use OCI driver. Enter the host details about the Oracle 10g R1 database
5) Test connect to the database.
Note: Tried the same scenarios with Oracle 11gR2 client as well. It was not working at all.
Any ideas and pointers would be great.

1. will my problem get solved after i install oracle 11g client on my machine.Yes, your problem should get solved. The version of the Oracle 11g Client must match the version of the JDev's JDBC drivers. Alternatively you may install an Oracle 11g Client and replace JDev's Oracle JDBC drivers with these from the installed client. Please, read carefully my 1st posting above in this thread.
2. can i patch JDeveloper 11g on my machine to work with 10g client, or can i do the same with 10g client.You might succeed if you replace JDev's built-in JDBC drivers (which are 11g versions) with 10g versions, but I do not recommend you to try that because JDeveloper 11g and ADF 11g may be using some 11g features that do not exist in 10g drivers, so you may have problems.
I also have PLSql developer installed on my machine and it works well.PL/SQL Developer does not use JDBC drivers, so it is not an relevant example in this case.
My generall recommendation is to use Oracle JDBC Thin drivers. Oracle claimed that OCI drivers had better performance, but this was really true about earlier releases. Current Oracle 11g JDBC Thin drivers offer excellent performance and they offer all the features of the OCI versions (which was not true about earlier releases). In my opinion, the most important disadvantage of Oracle JDBC OCI drivers is that most versions have native memory leaks so all the RAM would get consumed after long application execution. The fact that WebLogic Server does not offer Oracle JDBC OCI drivers by default anymore says that Oracle discourages the usage of the OCI driver in favour of Thin driver.
Dimitar

Unable to Connect to Oracle 10gR1 database from JDeveloper 11g using OCI JD

We are migrating our application from OC4J to Weblogic server. As a part, I am trying to create a database connection in JDeveloper 11g (11.1.1.3.0 - Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660) to Oracle 10gR1 database. Previously I had Oracle 10g Client installed in the machine. Created a database connection using OCI driver and when I try to test connect, I got "Test Failed: no ocijdbc11 in java.library.path". I searched through Metalink and forums and one suggestion was to install Oracle 11g Client on the machine where Jdeveloper 11g is installed. I installed 11g R1 client and tried the same test connection using OCI driver. Now I am getting "Test failed: ORA-12705: Cannot access NLS data files or invalid environment specified" error.
The same database connection works good with Thin driver with both Oracle 10g client and 11gR1 client.
Previously I had Jdeveloper 10.1.3.2 and Oracle 10g Client and I was able to connect to database without any errors.
Could you provide me the steps for this or if I missed any steps?
Steps to Replicate:
For the error: no ocijdbc11 in java.library.path
1) Install JDeveloper 11g (With embedded Weblogic Server)
2) Install Oracle 10g Client on the same machine
3) Create a database connection in the "Application Resources --> Connection"
4) Use OCI driver. Enter the host details about the Oracle 10g R1 database
5) Test connect to the database.
ORA-12705: Cannot access NLS data files or invalid environment specified
1) Install JDeveloper 11g (With embedded Weblogic Server)
2) Install Oracle 11gR1 Client on the same machine
3) Create a database connection in the "Application Resources --> Connection"
4) Use OCI driver. Enter the host details about the Oracle 10g R1 database
5) Test connect to the database.
Note: Tried the same scenarios with Oracle 11gR2 client as well. It was not working at all.
Any ideas and pointers would be great.

1. will my problem get solved after i install oracle 11g client on my machine.Yes, your problem should get solved. The version of the Oracle 11g Client must match the version of the JDev's JDBC drivers. Alternatively you may install an Oracle 11g Client and replace JDev's Oracle JDBC drivers with these from the installed client. Please, read carefully my 1st posting above in this thread.
2. can i patch JDeveloper 11g on my machine to work with 10g client, or can i do the same with 10g client.You might succeed if you replace JDev's built-in JDBC drivers (which are 11g versions) with 10g versions, but I do not recommend you to try that because JDeveloper 11g and ADF 11g may be using some 11g features that do not exist in 10g drivers, so you may have problems.
I also have PLSql developer installed on my machine and it works well.PL/SQL Developer does not use JDBC drivers, so it is not an relevant example in this case.
My generall recommendation is to use Oracle JDBC Thin drivers. Oracle claimed that OCI drivers had better performance, but this was really true about earlier releases. Current Oracle 11g JDBC Thin drivers offer excellent performance and they offer all the features of the OCI versions (which was not true about earlier releases). In my opinion, the most important disadvantage of Oracle JDBC OCI drivers is that most versions have native memory leaks so all the RAM would get consumed after long application execution. The fact that WebLogic Server does not offer Oracle JDBC OCI drivers by default anymore says that Oracle discourages the usage of the OCI driver in favour of Thin driver.
Dimitar

Unable to connect to mail via iCloud from iPhone or macbook air

error message from iPhone when trying to access mail "The connection to the server failed" any solutions?

For now....wait.
From the Apple Support Page, http://www.apple.com/support/icloud/systemstatus/
iCloud: Mail & Notes - Users Affected: <1%
01/08/2012 09:43 PST
Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

Unable to connect to BW3.5(IDES) from EP6.0

Similar Messages

Maybe you are looking for