Unable to connect to database server : MDM 7.1

Hello All,
I installed MDM 7.1 and I am unable to create/mount/unarchieve repository : Error message I am getting is :
Unable to connect to Database
I installed MSDE : Light version of SQL server... On command prompt I used: setup.exe sapwd=abcd SECURITYMODE=SQL
Its an mixed mode..
Dont know MSDE is okey to use for MDM 7.1? Any one faced such issue?
Thanks in advance
Rajeev

Hi,
Did you install Oracle client on MDM server. If not please install it and revert with the result..
Please check SAP Note 1350635 - "Problem connecting to database from MDM console" & Note 1363797 -" Oracle connection problem".. Kindly also check the log in MDM console and revert with the result.
Also, Please check Configurations Settings as mention in [MDM installation Document|https://websmp209.sap-ag.de/~sapidb/011000358700001668492008E] from Page no 42 to 45.
Check it and revert with your findings.
Regards,
Shiv

Similar Messages

MDM 71 - mdm console and clix - unable to connect to database server

Hi,
environment, MDM 7.1, AIX 6, Oracle 10.2.0.4 (installed as part of a standalone java AS)
i've an issue. I have installed MDM 71 via sapinst, before that I installed a standalone java application server. During the installation, i gave the 'oracle client', 'oracle home' and 'oracle sqlplus utility' to be those of the oracle database installed for the java AS.
After sapinst completed I tested my connection to the database via
tnsping <SID> = OK
sqlplus system/passwd@<SID> = OK
When i start up the mdm console (7.1.02.90) i can mount the MDM server, BUT when I try to configure the database settings i get
error 'unable to connect to database server'
I get the same error when i use clix dblist
Error: 0x84020004, Unable to connect with Database Server
Has anybody got any ideas.

To see why the MDM is not able to connect to database, do the following:
% cd /usr/sap/<SID>/MDSxx/log
% ls -ltr
You will find last updated log file with name like MDS_LogXXUX101224X164953.csv
% tail -100 MDS_LogXXUX101224X164953.csv
You will see the reason for not being able to connect. If the reason is:
",MDSAdminServerXGetAvailableReps,Oracle_DBConnection.cpp,205,,,,server_user,server_global,,,
2011-09-23T06:10:48.933,6 ,24,"Service 'SID', Schema 'system', ERROR CODE=12154 ||| ORA-12154: TNS:could not resolve the connect identifier specified
OCI Attach, try again ...
Then edit the /oracle/SID/112_64/network/admin/tnsnames.ora with entry like following:
SID.WORLD =
(DESCRIPTION =
 (ADDRESS_LIST =
 (ADDRESS =
 (COMMUNITY = SAP.WORLD)
 (PROTOCOL = TCP)
 (HOST = hostname)
 (PORT = PORT_NO)
 (CONNECT_DATA =
 (SID = SID)
 (GLOBAL_NAME = SID.WORLD)
then issue:
tnsping SID
If result is like
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = hostname) (PORT = PORT_NO))) (CONNECT_DATA = (SID = SID) (GLOBAL_NAME = SID.WORLD)))
OK (0 msec)

Unable to connect with Database server in MDM

Hi Experts,
I have installed the MDM server 7.1 on windows 64 bit box, but installed MDM console (32 bit).
Getting the issue like below
Can anybody please help me out to fix the issue.
Thanks in advance,
Bhaskar N

dear
Did you install Oracle client on MDM server. If not please install it and revert with the result..
Please check SAP Note 1350635 - "Problem connecting to database from MDM console" & Note 1363797 -" Oracle connection problem".. Kindly also check the log in MDM console and revert with the result.
Also, Please check Configurations Settings as mention in [MDM installation Document|https://websmp209.sap-ag.de/~sapidb/011000358700001668492008E] from Page no 42 to 45.
do the following
You need to create tnsnames.ora file even on the host where MDM is installed and define Oracle database host and instance there. Then, MDM user needs to have access to oracle client libraries and needs to have access to this tnsnames.ora file as well. Once you set this up, it will work fine.

'Unable to connect to database server' on local test server (CS4)

I am a php/MySql newb. Have designed static sites in DW since Macromedia DW 4 days.
I have set up a testing server on my Mac running OSX 10.6.7 using MAMP 1.9.5 and Dreamweaver CS4 to test my osCommerce store (I like to see what's happening visually, even if I just change a small variable in the code). Although I have imported the store database from my remote server, and the connection tests in the DW Database window to the store, mysql, and information schema databases in Dreamweaver are successful, I still get "Unable to connect to the database server!" when I try to preview a .php page with Live View or with a browser. I'm using the correct ports in my site definition (8888 and 8889). MAMP shows Apache and MySQL running, of course. Have tried logging in as root and as my ususal username witht the correct passwords. Everything seems to be right...but it's still wrong.
Do I also need to import the mysql and information schema databases from my remote server to replace the ones that came with MAMP? If so, where do I put the information schema db? Although it shows as a database in PhpMyAdmin, I don't see a folder or doc by that name anywhere in MAMP - it must be buried pretty deep! (I did find a file called information_schema_relations.lib.php in MAMP/bin/phpMyAdmin/libraries. Is that it?)
Or is it something else entirely?
Note that though I'm a fairly savvy user, I am not a developer or coder. Strictly a GUI/static design guy with a liberal arts education. Keep the answers simple and in plain English, thanks.
Have also posted this on the MAMP forum.

Hi Kanstantin,
Ieve tested the database connectivity through sqlplus using SYSTEM. But when I try to connect (Mount the repositiry server from MDM console, I facing the problem mentioned.
Please let me know if I need to do anything else.
For your info:
The following are the tnsnames entries
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
MD7 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = MD7)
      (INSTANCE_NAME = MD7)
      (GLOBAL_NAME = MD7)
    (HS = OK)
The following are the entries in listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = I:\oracle\MD7\102)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = mysapplm)(PORT = 1521))
Regrads,
Varadhu
Edited by: Varadhu on Aug 6, 2009 10:49 AM

Unable to Connect to database server

Hi All,
I have installed Oracle 11g R2 database, I used it for almost a month now and then today when I tried to log in into it I am getting this error.
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505)
I opened the enterprise manager and found that the database instance & Agent Connection Instance was down, when I tried to start that I got this error,
" SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 22 15:48:40 2013 Copyright (c) 1982, 2010, Oracle. All rights reserved. SQL> SQL> ERROR: ORA-12640: Authentication adapter initialization failed    "
lsnrctl status output:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                22-AUG-2013 15:38:25
Uptime                    0 days 0 hr. 53 min. 40 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\psabneka\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\app\psabneka\diag\tnslsnr\psabneka-lap\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Please suggest some workaround.
-Prashant

Please, post:
type C:\app\psabneka\product\11.2.0\dbhome_1\network\admin\listener.ora
hope this helps

I have problems to connect with Database Server in MDM SP5

Hi,
I am upgrading to SP and get problems to connect to the database server. I am able to start and stop the MDM server, but if I tru to create a new repsoitory or unarchive a repository I get this errormessage. "Unable to connect with Datase Server". In ealier versions og MDM i did not give any username or password whwn I made a new repositirt. Do you need to that no?
I see in the mds.ini file that there is defined a user "Sql Server DBA Username=master ". I sthis the user we shall use or is there another user?
Regars John-Kjell Hoset

Hi John,
I too faced the same problem and get rid of it by installing
SQL Server 2000 Driver for JDBC Service Pack 3
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyId=07287B11-0502-461A-B138-2AA54BFDC03A&displaylang=en
and i installed Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A
which you can download from
http://www.microsoft.com/downloads/details.aspx?FamilyID=413744D1-A0BC-479F-BAFA-E4B278EB9147&displaylang=en
Install with setup SAPWD="YourPassword"
I connected MDM Console wiht DBMS with Login credentials as
UserName sa
Password YourPassword
Hope this help to solve your problem.
Regards,
Santosh.

Unable to connect to sql server database

i run on CMD:
aspnet_regsql -C "Data Source =Davidchamoun/sqlexpress : intergrated security= true" -ssadd -sstype p
i got
a network-related or instance-specific error occurred while establishing a connection to sql server. the server
was not found or was not accessible. verify that the instance name is correct and that sql server is configured to allow remote connections. (provider: SQL Network interfaces . error: 25 – connection string is not valid
unable to connect to sql server database.
im using sql sever 2012 express, microsoft visual studio web 2008 express.
please help me.

i run it as :
aspnet_regsql -C "Data Source =Davidchamoun\sqlexpress : integrated security= true" -ssadd -sstype p
i got the same error :
an error has occurred . details of the exception:
a
network-related or instance-specific error occurred while establishing a connection to sql server. the server was not found or was not accessible. verify that the instance name is correct and that sql server is configured to allow remote connections. (provider:
SQL Network interfaces . error: 25 – connection string is not valid
unable to connect to sql server database.
im using also windows 8.1
pls help me
ty for ur reply

Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

Hi,
My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
I would really appreciate it if you could help me get ridd fo this issue.
Server Error in '/' Application.
Unable to connect to database. Check database connection information and make sure the database server is running.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[COMException (0x81020024): Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
[SPException: Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
   Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
   Microsoft.SharePoint.SPWeb.get_Request() +74
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
   Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
   Microsoft.SharePoint.SPContext.get_Current() +123
   CKS.EBE.BlogContext.get_BlogEnabledSite() +37
   CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
the description of the error on the server is as follows:
The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart. Check the database connection information
and make sure that the database server is running..

are you using the Aliases for the SQL Server, make sure your account having the correct permission.
If it is your QA farm, you can run the config wizard to fix his problem...
check this post having the similar issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Unable to Connect to Database (after server has been re-started)

Hi, I use Essbase Admin Services 7.1.3 and the server was not responding, therefore our IT guys re-started it. Since then I am unable to connect to one of the applications. I have tried to start/Stop the application but it just says "Application did not start". There are 6 databases in this application altogether (3 data and 2 Currency). The application has been there for about 3 years (it holds historic sales data) and there has never been any problems with it. When I tried to Start the application, in the message panel at the bottom it says "Error: 1013015 Unable to Connect to Database (2003)". It's as if there is a problem with this 2003 database but the 2002 and 2004 database are OK. Has anyone ever had this problem and knows how to rectify it?? Thanks in advance. Sarah

It may be that the server restart corrupted the database. Go into database properties and uncheck the box start database with application and then try to restart the application. You can try database validation, or simply reload the database from backup. But you can get the application up and the rest of the databases up by decoupling the database restart from the application start. There will be a .xcp log file in your application directory (and possibly your database directory.) These might help Hyperion Support in identifying the cause of the problem. But the quickest solution would be to reload the database from backup. The serer and application logs can also provide help in identifying the problem. One of the keys is to determine why the server is not responding before restarting the server. It may be that a single application is the source of problem. Typical causes are unscheduled free space restructures, application loads of large databases, and an occasional rogue process. Rather than rebooting the entire box, or even restarting the Essbase server, the safest approach is to only kill the job that is soaking up the cpu cycles, causing the server to be unresponsive. This requires identifying the offending process (esssvr.exe) and killingit. Often that restores the rest of the system to operations, giving you time to focus onthe offending application. You learn thses things when you are pushing the server to its limits (or beyond). If it happens often, you need to do a serious performance audit of teh server and determine whether you need more power and/or memory. And in any case, you are less likely to encounter this sort of problem in the future if you try to limit applications to a single database. This will allow a better utilization of system resources. And also, it's a good idea to shut down applications that you are not going to be using for a while. Every loaded app takes system resources whether or not it is doing anything. So review your list of apps that start on startup and consider unloading apps after completing batch processing. Sorry about the long lecture, but I speak from somewhat painful experience. I hope that this will help you.

FW: ADF BC4J unable to connect to database on Application Server 10.1.3.1.0

Please see ADF BC4J unable to connect to database on Application Server 10.1.3.1.0

Hello Steve. I'm getting the same error message as Carlos got when he tried to fire up the SRDemo. Following logon the splash screen has this error message:
Error
Failed to checkout SRService application module. Ensure your datasource name is SRDemo [case-sensitive!] and that connection settings are properly defined for a database with the SRDEMO schema installed. See server log for more exception details...
Apparently you guys have figured out a fix for this, but my command of JDeveloper/J2EE jargon is pretty limited at this point in my learning curve. (I've heard about Jndi, but have no idea what it does). Is there a statement I can add to the web.xml file that will fix this? If so, what is that statement, and where does it go in web.xml?
Thanks in advance.

Error calling report FRM-41213 unable to connect to Report Server

Hi,
I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
I installed it in both Windows 2000 SP4 and Windows XP SP2.
I would like to call a Report using a button inside Oracle Form.
I create my own Report Server, using : rwserver server=repsrv
A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
In Form (inside a button -> WHEN-BUTTON-PRESSED) :
1. Using RUN_REPORT_OBJECT()
 rep_id := find_report_object('REPORT10');
 if not id_null(rep_id) then
 v_rep := run_report_object(rep_id);
 else
 message('Null');
 end if;
 a. If I did not specify the name of the Report Server in Reports node of Form's property object
(I leave it blank)
The following error appear :
FRM-41211: Integration error, SSL failure running another product
b. If I specify the name of the Report Server : repsrv
The following error appear :
FRM-41213: Unable to connect to Reports Server repsrv
2. Using WEB.SHOW_DOCUMENT()
a. If did not I specify the server name in the parameter
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server rep_<computer_name> failed
b. If I specify the server name in the parameter --> server='repsrv'
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server repsrv failed
In Report :
If I try to navigate manually to :
1. http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally,
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server repsrv failed
4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
5. I have tried to use rwrun in command line.
rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
Question :
1. What supposed to be done?
The Report server is ready, but the web browser seems unable to connect to Report Server.
2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Problem solved.
I got the solution from another post.
Re: REP-51002: Bind to Reports Server rep failed
Here are the step I did.
Note : Please make backup for the following file : rwnetwork.conf
- In file rwnetwork.conf, remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
It should look like this :
<namingService name="Cos" host="blahblah" port="14021"/>
- I did not change the : name="Cos", since I do not understand what does it for
- Save you changes.
- Start the OC4J.
- Find the location of : namingservice.bat (on Windows platform)
- execute in the command line : namingservice.bat 14021
- finally start the report in the web browser
Note:
To shutdown the namingservice, use : namingservice.bat 14021 shutdown
Regards.
Buntoro

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Unable to connect to report server - on Win 8.1 and SQL Server 2014

unable to connect to report server on Win 8.1 and SQL Server 2014 version
Microsoft SQL Server 2014 - 12.0.2000.8 (Intel X86)
 Feb 20 2014 19:20:46
 Copyright (c) Microsoft Corporation
 Express Edition on Windows NT 6.3 <X64> (Build 9600: ) (WOW64)
Thanks

Hi,
I suggest you check out the following article for the steps of installing
Database Engine Services and SQL Server Reporting Service.
http://msdn.microsoft.com/en-us/library/ms143711.aspx
Best Regards,
Tracy
Tracy Cai
TechNet Community Support

Unable to connect to database in ofline mode

Hi ,
i have server OBIEE server installed in Linux and client installed on windows7
the issue is
when i log in to admin tool on client it opens and show all tables but..
..... when i right click a table and click on view data .. it through an error 'UNABLE TO CONNECT TO DATABASE"
I HAD CHECKED THE TNS NAME S EVERY THING IS FINE
can any help in this regard

Hi,
which DB are you using? if u r using Oracle DB refer the below steps and make sure u r end
There are 3 options to work around this
1. Copy your tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory (only the former is needed as that is the ORACLE_HOME)
2. Or instead of tnsnames.ora source entry, use the full expanded tnsnames as shown below
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.66.173)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = orcl)))
3) easy to connect u r DB
To configure OCI, you have to provide in the connection pool of the physical layer three parameters:
the call interface. You must choose OCI.
The data source name
The user name and password
In the data source name, you have to enter a connect identifier that can be one of the following naming methods.
//database_host[:port]/service_name
for more :
http://gerardnico.com/wiki/dat/obiee/oci
Thanks
Deva

I'm unable to connect to database thru cold fusion

I'm unable to connect to database thru cold fusion. it
sometiems give me an error that your uname is undefined , soemtimes
it gives ur index page not found so i created index page also but
still im unable to connect to database n update my records..plz
help me out..im a fresher in cold fusion

I am having a similar problem having CFMX 7.02 verify my SQL
Server 2005 Data Sources.
I am using the sa account for CF to access the db's. But i
get the following error:
Connection verification failed for data source: myDatabase
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
Every role in SQL Server has the sa grantor Grant enabled. I
can also login to SQL Server with the sa account w/o a hitch.
I don't know what else to do. The server information is set
to the ServerName port 1433, datasource name and database name are
the same as the database name in sql server, and the username and
password are set for the sa account.
Thanks!

Unable to connect to database server : MDM 7.1

Similar Messages

Maybe you are looking for