Unable to connect to HANA One instance from HANA Studio

I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

Hello G,
We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
@Gaurav,
We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
Thanks and regards,
Swapan

Similar Messages

Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
We have a different (DEV) Server (windows 2000) where a SQL Server 2000 instance is present.
When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
the same server from my local machine which has windows 7 and SQL 2012 installed).
This is the error i see -
"A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.) (.Net SqlClient Data Provider)"
When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
error -
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead
(recv()).]General network error. Check your network documentation.".
The same SSIS package runs successfully from my local machine.
Please, could someone advice how to resolve this situation?

Thanks Olaf.
Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

Trying to download songs from Itunes store. Keeps saying unable to connect. I have tried from store on computer and on phone. Please help i have weddings to do and need these songs!!!!!!!!!!!!!!!

Hey everybody Amazon.com works perfectly and no problems so Bye, Bye Itunes fix your junk *** program and ****** customer service telling me it's my computer and connection. Oh is that also why my phone can't download them either on a seperate cell network. Nice try garbage In the time it took for them to run me around i downloaded the songs i needed via Amazon.

Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

Connect SAP HANA Studio with SAP HANA One Instance Reg 70

Hello,
i have already create an instance and set all passworts in Management One Console.
If i want to add a new system in Hana studio a got an error message: "Database connection is not available"
SAPControl request failed. Cannot retrieve JDBC connection for: ...
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for more details.
at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:295)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:238)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:84)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sap://xxx.eu-west-1.compute.amazonaws.com:30015 [Cannot connect to host exxx4.eu-west-1.compute.amazonaws.com:30015 [Connection timed out: connect], -813.].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:219)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:186)
at com.sap.db.jdbc.Driver.connect(Driver.java:238)
at com.sap.ndb.studio.jdbc.JDBCPlugin$3.run(JDBCPlugin.java:590)
I must add, that i test it in the firm's intranet. So we have diverse firewalls. What firewall settings has our IT department change, for enabling the database connection?
Hope you can help me.
CT

Not related to UI Development Toolkit for HTML Developer Center. Moved to SAP HANA Developer Center community.
Regards, Mike (Moderator)

Unable to connect to the database instance using Enterprise Manager.

I just install Oracle 10gr2 in my computer and after successful installation created a database instance which also install successfully. I then configure the listener using Net Manager and then start the database instance, the listener and dbconsole, everything seems to work fine and checking the status of this services from the command prompt indicates everything started successfully. But when I try to use Enterprise Manager I was directed to the Database Down Page with a message unable to connect to database instance. I try to use startup and perform recovery but every time I log-in to the database an error message comes out:
SQLEXCEPTION
ORA-00604: error occurred at recursive SQL level 1
ORA-12705: Cannot access NLS data files or invalid environment specified.
It seems for Enterprise Manager to connect to the database it needs to access this NLS(National Language Support) data files or specify an environment variable to point to this data files. I am just new to Oracle and I am having difficulty solving this particular problem. Where is this data files located and how do I configure Enterprise Manager to access this NLS data Files?
Any help however small will be highly appreciated.

Are you able to connect to the database via SQLPlus?
What Operating System are you using?
Assuming Windows, can you RUN regedit to open Windows Registry and check the value or NLS_LANG when you select
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_<your_oracle_home>
Examples of vaules you may find:
1. ENGLISH_UNITED KINGDOM.WE8MSWIN1252
2. AMERICAN_AMERICA.US7ASCII
3. AMERICAN_AMERICA.WE8MSWIN1252
4. FRENCH_FRANCE.WE8MSWIN1252
5. GERMAN_GERMANY.WE8MSWIN1252
If you are not able to connect to SQLPlus, from the command prompt try setting one of the above:
e.g.
D:\>set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
D:\>sqlplus /nolog
SQL>connect sysman/password

While connecting to the default instance from out side of the server it's reaches to Named instance ?i

Hi All,
We have two named instance in "test" server. the names like test\a & test\b... The tcp\ip for test\a is dynamic and for test\b is default port 1433... Now customer requested to install the default instance...we had an issue with installation
that is the default port number is in use so, the default installation failed and then i changed the settings in registry to use the dynamic port for default instance and then i manually start the sql servers...seems all are good...but when i connecting this
default instance from out side of the box through SSMS it's pointing to the named instance which one having the default port number(test\b).
We can change the port number for test\b and assign that port to default instance...but the applications which are connecting to the test\b those are using the default port number...so, we don't want to disturb the connectivity...
is there any way to fix this issue with out changing the port number for test\b ?
it is urgent...we have to fix this issue ASAP..
Thanks in Advance,
rup

Hi rup,
Glad to hear the issue is resolved.
As your post, if SQL Server is configured to use dynamic port,
it is difficult for application connectivity because the port number selected changes every time that the Database Engine is started.
From your description, you have changed the dynamic port number to static port number. To avoid a common pitfall, please also ensure that
you have deleted the entry (0 or some random port) for dynamic port in SQL Server Configuration Manager. For more details, please review this
blog.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Connecting to two database instances from the same TopLink

Hi,
We are trying to create a process using BPEL where data from one database instance needs to be passed to the other. The process is compiling properly and we could deploy it in BPEL Process Manager. But when we try to run the process, the data is not getting inserted into the second instance. There is no error /exception being thrown at most of the time, but at times we are getting a 'Unique constraint error' eventhough there is no duplication of data.
Can we connect to two different instances using the same toplink. How can we achieve this.
Thanks in advance
Pratheusha

You need to use two different sessions with two different mapping descriptors

Unable to connect to SMC Client system from SMC Server System

hi,
i have installed SMC 3.6.1. on Solaris 10 OS . The SMC agents are installed are all system but SMC Server is unable to communicate with Client systems. SMC Server System can Ping and Telnet all the SMC Client systems , but unable to connect from SMC .
Please guide how can resolve this problem
best regards,
Adeel Mehmood

Hi Adeel,
i have installed SMC 3.6.1. on Solaris 10 OS . The
SMC agents are installed are all system but SMC
Server is unable to communicate with Client systems.
SMC Server System can Ping and Telnet all the SMC
Client systems , but unable to connect from SMC .
Please guide how can resolve this problemSo, you can login to SunMC, but you're unable to make an icon for any of your Agents? Or you have icons you made bofre but when you click on them now you get errors?
If these are new Agents, do they have more than one netowrk interface? If so, they may have security information for the "other" network (the one the SunMC Server's not on). You can try manully specifying the correct network for one Agent and see if it helps:
http://forums.halcyoninc.com/showthread.php?t=2
Regards,
[email protected]
http://www.HalcyonInc.com
!! New !! : http://forums.HalcyonInc.com

Unable to connect to SharePoint list data from PowerPivot in Excel

Hi,
I have the PowerPivot excel add-in installed and I can connect successfully to SQL data. I have two SharePoint farms - Farm 1 and Farm 2.
I am able to connect PowerPivot to SharePoint lists in multiple web applications in Farm 1 by using the ListData.svc.
e.g. https://farm1/_vti_bin/ListData.svc/Tasks
In Farm 2 I am unable to connect to SharePoint data. I have tried multiple web applications on Farm 2 and can't connect. I receive the following error. I am able to browse to the address in Internet Explorer and see a feed.
Has anyone else had this error?
Thanks in advance,
Mark
Error Message:
============================
Cannot connect to the specified feed. Verify the connection and try again. Reason: The underlying connection was closed: An unexpected error occurred on a receive..
============================
Call Stack:
============================
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.UpdateDataFeedParameters(ConnectionStringBuilder connBuilder, IDataSource dataSource, Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.GetCurrentConnectionString(Boolean checkFeedValid)
at Microsoft.AnalysisServices.Modeler.DataImportWizard.DataSourceBasic.ClickTestConnection(Object progressControl)
============================

Hi Millard1,
From your descripton, it seems you want to use SharePoint list as a data souce. If so, you should export the SharePoint as data feed in your SharePoint site, and then create a new PowerPivot table that contains the list. Here are some articles for your reference,
please see:
Use Data Feeds (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210625.aspx#sharepointlist
Using a SharePoint list as a data source:
http://powerpivotgeek.com/2010/10/28/using-a-sharepoint-list-as-a-data-source/
Regards,
Bin Long
TechNet Community Support

How can I connect to multiple WLS instances from a single Apache virtual host

Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something like this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway defines the the WL
connection for the entire virtual host, but I need to be able to do it on a location
basis is that possible?
Thanks
Jens Schutt

httpd.conf:
<VirtualHost 172.17.9.24:443>
DocumentRoot "/www/X"
ServerName qawebivesta.qa.livecapital.com
ErrorLog /usr/local/apache/logs/qaweb1.error_log
TransferLog /usr/local/apache/logs/qaweb1.access_log
SSLEngine on
SSLCipherSuite
ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCertificateFile /usr/local/apache/conf/ssl.crt/server.crt
SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/server.key
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/local/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
Debug ON
DebugConfigInfo ON
<Location /ivesta/>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 7001
</Location>
<Location /TMPPhase2>
SetHandler weblogic-handler
WebLogicHost qawlgc1
WebLogicPort 11001
</Location>
</VirtualHost>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/TMPPhase2 works fine, but when I try to access /ivesta I get a 404 from WebLogic
"https://qawebtmp.qa.livecapital.com/ivesta/index.jsp?__WebLogicBridgeConfig
Weblogic Apache Bridge Configuration parameters:
     WebLogic Cluster List:
          General Server List:
               Host: 'qawlgc1' Port: 11001
          DefaultFileName: ''
          PathTrim: ''
          PathPrepend: ''
          ConnectTimeoutSecs: '10'
          ConnectRetrySecs: '2'
          HungServerRecoverSecs: '300'
          MaxPostSize: '-1'
          DynamicServerList: ON
          StatPath: false
          CookieName: WebLogicSession
          Idempotent: ON
          FileCaching: ON
          DisableCookie2Server: OFF
          QueryFromRequest: OFF
          Build date/time: Jun 25 2001 15:09:34
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This should have been connecting to my 7001 instance not the 11001.
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
What do you mean the wrong port? Post the complete output from
WebLogicBridgeConfig as well as the URL you used.
Also, paste the weblogic relative portions from your httpd.conf
Thanks,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
I also used ?__WebLogicBridgeConfig to verify that it did pick up thewrong port.
Here is my build date for mod_wl.so in SP10
Build date/time: Jun 25 2001 15:09:34
Thanks
Jens
"Eric Gross" <[email protected]> wrote:
Make sure you are using the latest plugin. As well, add parameter:
DebugConfigInfo=ON and make a request with a query paramater of
?__WebLogicBridgeConfig and you should then see the build date/time.
We can
then see if you are indeed using the latest plugin.
It is not a possibility to get the source.
Regards,
Eric
"jens" <[email protected]> wrote in message
news:[email protected]...
And the solution where you put the WebLogic parm under location
the
last
location
over rule the previous.
I have also tried to upgrade my plug-in from SP8 to SP10 but that
didn't
make
any difference either.
Is it possible to get the source code for the plug-in, I'm afraid
that
it
don't
follow put's all it's parm's a the vhost level no matter where in
the
conf
file
they are placed.
HELP
Jens
"Eric Gross" <[email protected]> wrote:
Yu is correct.
Here is another way to do it as well:
MatchExpression /x
WebLogicCluster=server1:port,server2:port|PathTrim=/x
MatchExpression /yWebLogicCluster=server3:port,server4:port|PathTrim=/y
The general syntax for this would be:
MatchExpression exp name=value|name=value
Where exp=Mime type(*.jsp) or exp=/x(path)
The next argument in the list is a pipe(|) delimited list ofname=value
pairs (ie: WebLogicHost, WebLogicPort, WebLogicCluster, PathTrim,
PathPrepend, etc..).
Hope this helps.
Regards,
Eric
"Yu Tian" <[email protected]> wrote in message
news:[email protected]...
Hi Jens,
I think you can proxy by ppath.
<Location /x>
SetHandler weblogic-handler
WebLogicCluster cluster1
</Location>
<Location /y>
SetHandler weblogic-handler
WebLogicCluster cluster2
</Location>
thanks
Yu
"Jens" <[email protected]> wrote in message
news:[email protected]...
Configuration : WebLogic 5.1 SP8 & Apache
I need to be able to have a configuration that looks something
like
this.
www.company.com/x -> WL cluster01
www.company.com/y -> WL cluster02
In all the examples that I have been able to find they alway
defines
the
the WL
connection for the entire virtual host, but I need to be able
to
do it
on
a location
basis is that possible?
Thanks
Jens Schutt

Unable to connect to my home PC from my home Mac using Windows Remote Desktop

i have downloaded from the Microsoft website and also the Application from the App store and both fail to connect. i have connected to my PC using the migration assistant so they are able to recognise each other.
on the Mac:
- downloaded the app and also done the download from MS website - both fail and suggest to check that remote access is enabled.
on the PC:
- have my Ipaddress from "IPConfig"
- have enabled remote access through windows firewall
The PC is on and has a password enabled
Error on App:
"Unable to connect to remote PC. Please verify remote desktop is enabled, the remote pc is turned on and available on the network and try again"
both are connected to the internet and on the same home network. Can anyone please advise to any additional steps as this seems as though this should be really straightforward. as another note i don't have another firewall software interrupting - am just
using windows firewall until i can get this working.

Hi,
Firstly, please refer to the article below to enable remote desktop connection on your Windows 7.
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-7
On your Mac, you can download the app here.
https://itunes.apple.com/hk/app/microsoft-remote-desktop/id715768417?mt=12
More information:
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Hope this helps.
Jeremy Wu
TechNet Community Support

Unable to connect to database when running from JDeveloper

Hi all,
When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
Rep-501 : Unable to connect to the specified database.
I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
GPGWL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = GPGWL)
)

Hi,
this question is best answered on the Reports forum
Reports
Frank

Unable to connect to HANA One instance from HANA Studio

Similar Messages

Maybe you are looking for