Unable to connect to HANA Studio on CAL using Microsoft Azure

Hi
I have created a new instance in CAL on Microsoft Azure. I have started and activated the instance. In Azure also its in started mode and I am being billed. But then when I login using SYSTEM as user name and the Password that I created while setting up my instance in CAL, I get a message saying, "Invalid username or password".
I gave the Public IP address in putty, the port by default is 22. I clicked on open but I am getting a message, network error: Connection time out.
I opened HANA Studio and gave the public IP address, instance 00, User Name as system and password is the one I created during setting up of my instance in CAL. But I am unable to login here aswell.
Can any one please explain me what the issue is? Do I have to reset my password? How do I do that in CAL? Or is it any issue with the IP addresses?
As a technology its a good feature to access HANA on cloud but from user friendliness I find it very tough to access. I had same problems with AWS also. Good old days was good when you opened SAP Logon pad and accessed the system straightaway with single sign on. Is it possible to have some thing like single sign on while accessing HANA Studio on Cloud. I don't want to be entering the IP address each and every time I connect. And half the time the IP address doesn't connect.
Please assist.
Thank you.
Regards,
Pavan.

Are you sure the proper ports are opened and that your network is allowing you to actually access those specific ports?
Are you able to go to http://IP OF SYSTEM:8000 or http://IP OF SYSTEM:80 do either load up a page for you?

Similar Messages

  • Unable to connect wirelessly on an Acer laptop using Vista

    I have a Windows XP connected wirelessly to my Verizon Router M1424WR, but I am unable to connect wirelessly on an Acer laptop using Vista. The Vista can only connect with Ethernet. It will not accept the WEP key.

    #1 Check the level of WEP. Two examples: 64 Bit, 128 Bit.
    #2 And check to be sure, if you use a WEP password of Hex or Ascii.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Unable to connect to HANA One instance from HANA Studio

    I am trying to add my HANA One instance to my HANA Studio and keep getting an error "The system is not reachable, the login data could not be considered". Any pointers on how to troubleshoot this would be much appreciated.

    Hello G,
    We understand you situation very well. We are expecting a follow-up on the status based on our suggestion made within less than 1 hour after posting the issue even during weekend.
    As far as your SAP HANA One Developer Edition, the suggestions made here for productive uses may not be relevant. Please follow-up appropriately posting and following SCN from where you initiated HANA One Dev Edition as SCN is heavily used for Dev Edition..
    In either case, you should not keep any instance running till you can use it. We strongly recommend to stop the instance while you are not using it or between troubleshooting.
    @Gaurav,
    We will appreciate an update here. We like to see you are start using SAP HANA One for productive uses immediately.
    Thanks and regards,
    Swapan

  • Connect SAP HANA Studio to database on local server

    I've installed SAP HANA Studio, and my application is running on a local server. How could I connect to my local database from Studio?
    What are the values for Host Name, Instance Number and options for JDBC Connection, where can I find these data?

    Not related to UI Development Toolkit for HTML Developer Center.  Moved to SAP HANA Developer Center community.
    Regards, Mike (Moderator)

  • Creating an Import Connection in HANA STUDIO

    Dear SAP Aficionados,
    We have recently installed the HANA solution in our current infrastructure, although there are still a couple of points still to workout.
    Dealing with our internal team we are just about to start testing out the solution in a couple of days. Unfortunately we have stumbled over a small inconvenience that I think this team of individuals would help us find a solution.
    In studio we are doing the following:
    File
    Import
    Information Modeler --> Source Object
    Select or Manage Source System - we have to create a new one as we have yet to do.
    Now creating a Connection I have a couple of questions:
    a- should we create the connection for the DLT or the ERP SYSTEM?
    b- As per our knowledge we have not created an "Encryption Passphrase" on either of these systems, is there a default one? It does not permit us to pass the to test the connection without the passphrase.
    Thanks in advance for your help and orientation on this.
    Regards,
    Juan Santos

    Hello,
    this functionality is designed for managing BusinessObjects Data Services to automatically load tables into SAP HANA.
    Are you using BusinessObjects Data Services?
    1.) You need to first Configure Import Server - go to perspective Modeler / section Setup / option Configure Import Server.
    2.) In BODS you need to create new source system - go to tab Datastore and create new Datastore
    3.) now when you will run import again you should see defined connection
    Note: You should not be creating any entry manually.
    For more information you should see Modelling Guide - chapters:
    4.1 Configuring Data Services for Metadata Import
    4.3 Importing Table Definitions
    Tomas

  • Connect SAP HANA Studio with SAP HANA One Instance Reg 70

    Hello,
    i have already create an instance and set all passworts in Management One Console.
    If i want to add a new system in Hana studio a got an error message: "Database connection is not available"
    SAPControl request failed. Cannot retrieve JDBC connection for: ...
    com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for more details.
      at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:295)
      at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:238)
      at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:84)
      at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
      at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
      at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sap://xxx.eu-west-1.compute.amazonaws.com:30015 [Cannot connect to host exxx4.eu-west-1.compute.amazonaws.com:30015 [Connection timed out: connect], -813.].
      at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:219)
      at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
      at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:186)
      at com.sap.db.jdbc.Driver.connect(Driver.java:238)
      at com.sap.ndb.studio.jdbc.JDBCPlugin$3.run(JDBCPlugin.java:590)
    I must add, that i test it in the firm's intranet. So we have diverse firewalls. What firewall settings has our IT department change, for enabling the database connection?
    Hope you can help me.
    CT

    Not related to UI Development Toolkit for HTML Developer Center.  Moved to SAP HANA Developer Center community.
    Regards, Mike (Moderator)

  • Unable to Connect to my organization's EAS using MS Mail app since upgrade to Windows 8.1 -- certificate error

    Last November, my ASUS laptop forced me to update to Windows 8.1.  Since then, I cannot connect to my organization's mobile EAS using the Mail/Calendar/People app.  The Mail app says "We could not connect to .... because of problems with its
    digital certificates.  Contact your system administrator for info."  I also tried to delete the account and recreate it.  At the account info screen, it gave a related error message, stating "To connect to this account, you need a
    valid certificate on the PC. Contact your system administrator for more info."
    In trying to recreate the account, I note that the 8.1 Mail app appears to have combined all EAS connections -- I seem to recall different options for connecting previously, including one that was more specific to mobile EAS connections.  My organization
    only supports connection to mobile devices, and I continue to be able to connect via Windows phone, Android (iOS devices also supported).
    I have done some digging and see that in my Windows Certificate Manager, there is a Personal Certificate with an error message. It's a "Token Signing Public Key" for "Client Authentication" using an RSA Public Key, but under the Certification
    Path tab, the status states "The issuer of the certificate could not be found."  I suspect this is the certificate that my organization's server is sending but is no longer being recognized by Windows 8.1.
    My organization has been unwilling to support me on this.  They point to the fact that all other devices work, my connection worked with Windows 8.0, and they don't have enough users that connect via Windows 8.1 laptops/tablets to troubleshoot on their
    end.  They also don't want to change setting that then cause other users to lose connectivity on the more commonly used mobile devices.
    So, to trouble shoot myself, I have looked up posts on related issues and I have done all of the following to no avail:
    - Make sure my Windows is up to date, including that latest Certificate/Credential update;
    - Uninstalled the Mail/Calender/People App, restarted, and reinstalled it;
    - Had MS Online support try to trouble shoot.  They created a test account and tried to connect using that to no avail.
    Notably, I have two Windows 8.1 machines -- my wife and I got matching ASUS laptops that both upgraded to 8.1 from 8.0  -- and I am unable to connect to my organization's mobile EAS using either machine. 
    To me, this is clearly a Windows 8.1 issue.  The Mail/Calendar/People app should interface with mobile EAS exactly the same way that other mobile OSes do.  Apparently this was the case with Windows 8.0, but no longer. 
    The last thing I'll add is that my organization requires password and remote wiping when connecting to the mobile EAS.  But, this wasn't an issue when I had Windows 8.0 -- it connected fine and mandated password and remote wipe features.
    NOTE: I originally posted this question on the Windows 8.1 Tehchnet forum and was told by an MS Engineer Soumya Sunda Debroy to repost in this forum. 
    PLEASE ADVISE.  YOUR HELP IS APPRECIATED.
    - Dan

    Per the post above, I was pointed to Microsoft's remote connectivity analyzer and it appears to me that the GoDaddy Certificate -- which was compatible with Windows 8, is not compatible with Windows 8.1.  (See results below.
    I've also seen posts in other threads to "Ignore SSL errors" -- my Mail app doesn't present me that option, even though I uninstalled and reinstalled it.  So, can anyone help?
    Testing the SSL certificate to make sure it's valid.
    The certificate passed all validation requirements.
    Additional Details
    Elapsed Time: 171 ms.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server damobile.sccgov.org on port 443.
    The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
    Remote Certificate Subject: CN=*.sccgov.org, OU=Domain Control Validated, Issuer: SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona,
    C=US.
    Elapsed Time: 84 ms.
    Validating the certificate name.
    The certificate name was validated successfully.
    Additional Details
    The host name that was found, damobile.sccgov.org, is a wildcard certificate match for common name *.sccgov.org.
    Elapsed Time: 0 ms.
    Validating certificate trust for Windows Mobile devices.
    The certificate is trusted and all certificates are present in the chain.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=*.sccgov.org, OU=Domain Control Validated.
    One or more certificate chains were constructed successfully.
    Additional Details
    A total of 1 chains were built. The highest quality chain ends in root certificate OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US.
    Elapsed Time: 30 ms.
    Analyzing the certificate chains for compatibility problems with Windows Phone devices.
    Potential compatibility problems were identified with some versions of Windows Phone.
     <label for="testSelectWizard_ctl12_ctl06_ctl02_ctl02_ctl01_tmmArrow">Tell
    me more about this issue and how to resolve it</label>
    Additional Details
    The certificate is only trusted on Windows Mobile 6.0 and later versions. Devices running Windows Mobile 5.0 and 5.0 with the Messaging and Security Feature Pack won't be able to sync. Root = OU=Go Daddy Class 2 Certification Authority, O="The Go
    Daddy Group, Inc.", C=US.
    Elapsed Time: 5 ms.
    The Microsoft Connectivity Analyzer is analyzing intermediate certificates sent by the remote server.
    All intermediate certificates are present and valid.
    Additional Details
    All intermediate certificates were present and valid.
    Elapsed Time: 1 ms.
    Testing the certificate date to confirm the certificate is valid.
    Date validation passed. The certificate hasn't expired.
    Additional Details
    The certificate is valid. NotBefore = 8/7/2013 12:51:02 AM, NotAfter = 8/17/2016 4:07:52 PM
    Elapsed Time: 0 ms.
    Checking the IIS configuration for client certificate authentication.
    Client certificate authentication wasn't detected.
    Additional Details
    Accept/Require Client Certificates isn't configured.
    Elapsed Time: 149 ms.

  • Unable to connect to the remote ftp server using dreamweaver.

    For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
    I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
    Please help somebody!!

    I am having a similar problem... maybe.  I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error:  Cannot make connection to host. Your login or password is incorrect.  That's odd, I've been connecting all day.  So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully.  I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host...  So I reboot my computer and start Dreamweaver CS3 again.  I reenter my remoter server information and click the Test button.  "... connect to your webserver successfully".  I try to put any file, FTP error again.  So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today.  I went through the trouble shooting steps listed here, though my FTP Logs are empty.  I cannot stay connected or even see the remote folders to try to drag and drop.  I tried to run ftp from a windows command prompt and it seems to connect me.
    I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files.  It's definately a Dreamweaver problem.  Any suggestions?

  • Unable to connect Brother printer to Airport Extreme using USB

    Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities.  My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g.  Instead I'm fine hooking up the printer to the airport extreme using a USB.  When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on.  When I try to Open Printer Utility, there is a connection error.  I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB.  I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet.  Any help would be much appreciated, thanks,

    Please explain exactly what you're experiencing that leads you to claim that.
    The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not.  In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

  • Unable to connect to the Enterprise Manager by using SYS as sydba

    Oracle 9.2.0.4 is running on HPUx 11i machine. When I am trying to connect to Enterprise manager/sqlplus by using salplus as /sysdba, It gives me the following errore.
    ORA-01031: insufficient privileges
    If you encountr this problem, please let me know, how to solve it.
    Regards
    Sebthil

    Solution:
    I ran into the same problem. You have to first create a password file. Run
    orapwd file=<fname> password=<password> entries=<users>
    The file will usually be in the dbs by default. You may have to play with the file name. I had to make it orapwd in dbs to make it recognize correctly.
    Next you need to modify your startup parameter for your instance to use the remote_login_passwordfile='shared' or 'exclusive'
    Set it to exclusive if you have only one instance or shared if you have multiple instances. I had to use the pfile and start the instance with that. Just rename your spfile and type 'sql>create pfile from spfile' and then edit it. Set your parameter and restart your instance. The do 'sql>create spfile from pfile' to make your spfile again. Now you should be able to connect as sys remotely from sql or OEM!!!
    Doc:
    Setting REMOTE_LOGIN_ PASSWORDFILE
    In addition to creating the password file, you must also set the initialization parameter REMOTE_LOGIN_PASSWORDFILE to the appropriate value. The values recognized are described as follows:
    Value Description
    NONE
    Setting this parameter to NONE causes Oracle to behave as if the password file does not exist. That is, no privileged connections are allowed over non-secure connections. NONE is the default value for this parameter.
    EXCLUSIVE
    An EXCLUSIVE password file can be used with only one database. Only an EXCLUSIVE file can contain the names of users other than SYS. Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users and have them connect as themselves.
    SHARED
    A SHARED password file can be used by multiple databases. However, the only user recognized by a SHARED password file is SYS. You cannot add users to a SHARED password file. All users needing SYSDBA or SYSOPER system privileges must connect using the same name, SYS, and password. This option is useful if you have a single DBA administering multiple databases.

  • I want to connect SAP HANA database (Default database) using JDBC connection URL.

    I am using trial account .at sap cloud server.
    What will be my URL of SAP HANA database for Trail account.
    For ex:
    java.sql.Connection conn= java.sql.DriverManager.getConnection("jdbc:sap://<YOUR SAP HANA IP>:host","<YOUR SAP HANA USER>","<YOUR PASSWORD>");
    I had User and password but what supposed to be used in place of IP and Host ?

    Thanks .But iwant to use like this ..and below properties are not working
    repliesd as connectin refused -813
    please help onthis
    <bean id="dataSource"
          class="org.springframework.jdbc.datasource.DriverManagerDataSource">
          <property name="driverClassName" value="com.sap.db.jdbc.Driver"/>
          <property name="url" value="jdbc:sap://localhost:30015/?currrentschema=TestSchema" />
          <property name="username" value="p1940828544"/>
          <property name="password" value="[email protected]"/>
       </bean>

  • Unable to connect remote databse via windows XP(using Instant Client)

    I have downlaod instant Client and the PATH env variable automatically is set when I install Instant Client. Then I try to connect using the following(from the path C:/XEClient/bin):
    sqlplus username/passwd@//host:[port][service name]
    I get the following error:
    ORA-12170: TNS: Connect timeout occurred
    When I ping the host I get reply.
    Also I am able to connect to that same database thru perl( so I presume there is no problem with the database not avaiable or port not open etc), where additionally ORACLE_HOME and ORACLE_SID env variable are set to the path in the remote machine. The databse version is Oracle 9.2
    Below is the sqlnet.log:
    Fatal NI connect error 12170.
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 30-AUG-2006 14:56:03
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: Message 12535 not found; No message file for product=NETWORK, facility=TNS
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Message 505 not found; No message file for product=NETWORK, facility=TNS
    nt secondary err code: 60
    nt OS err code: 0
    Client address: <unknown>
    ===========================================================
    Am I missing some set up.
    Can anybody help please...I have been trying since last 3 days.
    Thanks

    Hi Laurenz,
    Sorry to say...but it still does not connect(incorporated your suggestions), nor is the trace generated. sqlnet.log looks no different. As about any other oracle clients...I did not have any until yesterday evening when we installed the entire 10g oracle...client and database.
    Anyways now too after having installed oracle 10g on D drive, no succes in connecting to remote databse.
    Two questions:
    1. Is XE client compatible with 10g database? As I am trying to connect to 9.2 version as mentioned in my initial query.
    2. When I ping the host I do get reply. BUT when I telnet i.e.
    telnet host port
    ....it says "could not open connection to the host, on port XXX: connect failed"
    Does it mean there is a firewall at the remote end which is preventing the successfull connection? But then how do I connect thru' Perl with no extra info...
    Any other suggestion please let me know...and also do you suggest I uninstall all oracle clients other than XE...or is there any way out ...having multiple clients?
    Another query...hope I can use toad after having set up the XE client?
    Thanks in advance...
    Message was edited by:
    user527367

  • Unable to connect 11g database as a sysdba using toad 10

    Please i need an urgent help.
    First i will let you know about my environment.
    OS : HP-UX 11.3
    Database : 11g R1
    Toad : 10.6
    I have set the password file with more than 1 entries for sysdba. The below message will shows the entries of user entry in password file.
    SQL> select username,sysdba from v$pwfile_users;
    USERNAME SYSDB
    SYS TRUE
    TPAUSER TRUE
    When i try to connect to the database 11g using the user as sysdba i am getting error ora- 01031 : Insufficient privileges.
    Please help me out.
    Thanks in advance

    / as sysdba means, omit username and passowrd and use OS authentication. For OS authentication to work, the account must be a member of the OSDBA group, which is DBA on a Unix server, or ORA_DBA under Windows. Remote SQL*Net logins cannot use OS authentication, but can use the password file.
    The password stored in your password file may not be the same used for the Oracle Admin account. Please see the following link how to setup the password file:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/dba007.htm

  • Unable to connect macbook air with iphone 5s using bluetooth

    both the system able to pair the devices but getting disconnected within 1 sec. While same iphone 5s is connected to other bluetooth devices like my car's system.

    Correct, Macs and i-devices do not connect via Bluetooth.
    What are you trying to accomplish?  There is probably some other way to do it.

  • I am unable to connect my PC to my Mac using the Migration Assistant.  The two computers do not seem to connect and I am not sure on how to do so.  I'm using an Ethernet cable and neither computer recognizes the other.  How can I get the two to connect?

    The PC keeps saying "Waiting for your Mac to Connect" and the Mac keeps saying "Looking for Computer"  I have no clue what to do.

    I suspect you didn't follow the Migration Assistant instructions. Please carefully look over:
    http://support.apple.com/kb/HT4796?viewlocale=en_US
    If you still cannot get it give AppleCare a call, the number is in your owner's manual. You have 90 days of free telephone support when you purchase a new Mac. They can assist on the OS X side but remember they may not speak MS Windows.

Maybe you are looking for