Unable to connect to home wi-fi network after iPhone restores an old backup
For some reason when I recently connected my iPhone to iTunes, it restored an old backup from a few days earlier. Since then, I can no longer connect to wi-fi networks I previously connected to regularly, like my home and office networks. I have tried resetting network settings, rebooting the phone, forgetting the networks, etc. Nothing seems to work. I have no idea what else to do.
If anyone else is having this specific problem, please help me out.
The restore process don't restore the Wireless networks that you used to use... this is a security measure.
Similar Messages
-
Hi,
ive got a Iphone 6+128
after update to 8.3 its impossible to connect to wifi at home network. (message wrong password or unable to connect)
but its ok to connect at office wifi network
What should i do ? ) help me pleaseHey Alex,
If you are having an issue with being unable to connect to your home Wi-Fi network from your iPhone, I would suggest that you troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L -
Hello-
I just upgraded from an iPhone 4 to an iPhone5s. I was trying to set up my new iPhone. I connected it to my Mac and iTunes and chose "restore backup from old phone". It's now finished syncing but my iPhone keeps on telling me to "connect to itunes". It's as if my new iPhone is not recognizing that restoring is done. What do I need to do?
Thanks for your help.if the iPhone goes through the cycle again every time it is re-connected to your Mac, there is a problem with the old backup or with the new iPhone.
Try restoring the new iPhone with iTunes as a new iPhone or not from the backup. If no problem after this, bingo. -
Used to be able to connect to home Wi-Fi network, but no more
Used to be able to connect to home Wi-Fi network, but all of the sudden my IPad has stopped connecting. I have verified that the Wi-Fi network is operational (IPhone, smart TV, laptop) and also that the IPAD is operational (Wi-Fi hot spots). I have tried forgetting the network and adding it back in - but IPAD just sits and spins. Have also forgotten network and intentionally entered incorrect password, and I do receive an immediate reject so I know the IPAD is talking to the router.
Any ideas?Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Can't get my ipad1 to connect to my home wifi network after doing restore
Can't get my ipad1 to reconnect to my home wifi network after doing restore, help please
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
iPad 2 doesn't recognise my password for wifi. Unable to connect. Tried resetting the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook and iPhone accepts the password, not my ipad 2
Hey brainmasala,
Thanks for using Apple Support Communities.
Sounds like you are not able to connect to a Wi-Fi network with your iPad. This article has a section for Unable to connect to a Wi-Fi network and the second article is the recommended network settings. If after these it still has the same issue you may want to restore the device to factory settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a nice day,
Mario -
Laptop is unable to detect my home router wifi network but detecting all other neighbour networks
My pavilion g6 laptop is unable to detect my home router wifi network but detecting all other neighbour networks even my phone network also. The same router network is detecting good in another laptops.
Hi , Welcome to the HP Forums! It is a great place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More i understand that your notebook finds and displays many network but not yours but another laptop does locate it. One of the easiest steps to try is to reset the router by removing power for approximately 20 seconds and then reconnecting the power. Give the router time to reset and come back up . Does you network now show? If your network is set to 5.0 GHz try changing the setting to mixed mode or 2.4 GHz as that is the best selection for HP notebooks. Here is a link to HP PCs - Troubleshooting Wireless Network and Internet (Windows 8). To say thanks for replying, please click the thumbs up icon below. If this overcame your difficulty please tell people by selecting solution provided to allow it to found with greater ease. Best of Luck! -
TS1398 Unable to connect to home wifi
I'm unable to connect to home wifi with iphone. My computer is able to connect as usual.
Buried deep in that link is a suggestion to turn the router off and on again to reboot it. This should be the FIRST thing you try, not the last. It will usually resolve the problem.
-
How do I get into iTunes to access Netflix, when I get "iTunes unable to connect until time has been set", after submiting my password?
You need to follow the instructions in this article that best apply to your situation:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
If you do not have a backup in either iCloud or iTunes, then you will have no way to retain the information on your device because you will have to restore it in order to access it again.
Sorry,
GB -
I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?
Welcome to the Apple Community.
If home sharing isn't enabled on the Apple TV, you will need the aluminium remote that came with it to do so. -
I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.
The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
Do a factory reset and setup from scratch.
That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
See A4 here.
http://pondini.org/TM/Troubleshooting.html
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly. -
Unable to connect to home wireless network with my iPod touch
I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
Thank you for all suggestions and your help.I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.
-
WiFi - unable to connect to home network
I had a problem syncing and iTunes not recognizing my iPod touch, (and my new iPad). Did a restore on the iPod Touch and that solved the syncing problem, now I cannot connect to the WiFi in my home, (cannot connect with my new iPad either). I have a Linksys Wireless-N Broadband Router Model WRT160N. I am dying to connect the new iPad and get it up and running, etc. Can anyone help me solve the "Unable to connect to (my home network's name)".
Use G band, not N. I encountered a lot of problems with my new router on wireless N. Here is a reply I wrote for the other posts about iPad connectivity problems:
I have the base iPad 16gb Wi-Fi model and it was connecting to wifi fine. A few days ago I had to get a new modem/router. I bought a netgear dual band model (G and N) and used wireless "N" on my my two MacBooks and my iPad.
Two days ago I started getting the "Safari could not open the page because the server stopped responding." error on the iPad along with the schizophrenic signal strength bars going from three, to one, to two, to disappearing totally, to whatever, and Safari not opening pages and sometimes crashing, and when it would connect running slower than molasses.
My laptops worked fine, seeing both G and N and working equally well regardless of which I chose.
I did all the jumping thru hoops I have read on this and various forums and that Apple suggested back in April with naming each band on the router differently but with same security settings, renewing lease on Safari, reseting iPad, resetting network settings, turning auto connect off, etc., etc., etc, none of it worked.
So I started to wonder . . . does the iPad even work with "N" . . . the Apple site says "yes", but I wondered . . . what happens if I have the iPad ignore "N" and connect only with "G".
Guess what . . . that fixed the problem.
I went into Settings > WiFi > and told it to "Forget this Network" for the "N" band and then selected the "G" band.
Problems gone.
If you're experiencing the connection problems I'd bet dollars to doughnuts you're trying to use wireless "N". Have it ignore that band and use "G". -
Unable to connect to home network (WPA2-PSK, works on Windows)
Hello!
I am having problems with connecting to my home network (on a FRITZ!Box Fon WLAN 7360 SL) which uses WPA2-PSK encryption.
Windows works normally so I don't think that it is a router issue.
In addition, I managed to connect to my Universities WPA2 network and another unsecured network without problems.
I tried netcfg+wpa_supplicant, wpa_supplicant on its own and wicd (on a sidenote, wicd didn't even manage to connect to the router when using a cable). None worked.
This is the wpa_supplicant conf file that I am using:
## wpa_aachen.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=1
fast_reauth=1
network={
ssid="myssid"
psk=hexcode
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
I am getting an "authentication timeout" error everytime I try. Yes, I double and triple checked the passphrase. I also tried it via hexcode and plaintext passphrase.
Does anybody have any suggestions?
Last edited by lorizean (2012-10-14 20:59:49)Ive been trying the same thing for several hours googling it etc. wicd doesnt work always ends up with bad password error no matter what..
so.. this worked for me:
get into term as root and type:
NetworkManager start
then it will pop up in the notification area click network settings / wireless /connect to hidden network and type name, pass and it connect just fine..
really simple and it works -
Forget and reconnect the netwrok doean't solve the problem.
Even Network Reset recommended in others iPad user in the forum can't help as well.
Please advice. Thanks.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Please Help! My iPhone 4 won't power on!
iPhone 4, out of warranty coverage, won't power on. 1. It has about 60% battery before it dead, but suddenly it became black screen and not responsive (like powered off). 2. Whatever I did, like "holding the power button and home button
-
Have a brand new ipod touch and the screen is completely unresponsive. I cannot swipe the screen to configure it at all. I have pressed the home button and on/off button to reset it but it does not have any effect. Please could someone help.
-
Acrobat X Pro - Duplication of form fields
I use Acrobat X Pro to make fillable forms and frequently have an issue with form fields duplicating over top of each other when I try to format a group of fields. Our forms are often several pages in length and it's very time consuming to have to re
-
I'm downloading a tv series onto my new iPad but the files don't seem to be under 'video' also tried to download music but these files are also not appearing on my iPad. Any ideas?
-
Indicator for third party vendor
Hi, I would like to know how to create third party vendor in SAP. Is there any indicator that indicate that the particular vendor is third party vendor? Please advise. Thanks.