Unable to connect to home wireless network

Hi -
I just got my 16mb Iphone 3G and tired to get it to sign on to the wifi network at home. It sees the ssid but just won't sign on. I have a open network, so there shouldn't be anything that will prevent it from getting on to the network. Please advise

When you try to select your network name on your iPhone, does the phone then show a tick next to the network name? If it does, then tap the clue arrow and see if your phone has a registered IP address. If it doesn't, then check out the various articles on the apple support site.
If it does show an IP address but still won't connect to the internet, itunes or app shop etc, then it may be a wlan b/g problem that people have recently started mentioning. Check out the other posts for more info on that.
Stuart

Similar Messages

  • Unable to connect to home wireless network with my iPod touch

    I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
    I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
    The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
    Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
    Thank you for all suggestions and your help.

    I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

  • IPhone 5 won't connect to home wireless network

    After updating to iOS 7 my iPhone 5 has been unable to connect to the wireless network in my home.  It will recognize it, ask me to input password, and then it will say it cannot connect.  I have shut the iPhone 5 on/off, turned on/off the wireless, turned on/off the bluetooth, and attempted to install the latest iOS update (but cannot because it won't let me unless I am connected to wifi).
    I am having this problem with my MacBook Pro as well.

    There is something wrong with your wireless router or network - especially if you have no problem connecting your iPhone and MPB with any other wi-fi network besides your own.
    Have you tried resetting your wireless router and network in conjunction with the modem, and/or have you checked the manufacturer's website to see if there is a firmware update available for your wireless router model that has not been installed?
    What type of encryption are you using with your wireless network - WEP, or WPA2?

  • I'm unable to connect to my wireless network

    I am unable to connect to my wireless network on my iphone 4.  It worked previously. My husband has no problem with his iphone connecting.

    Same here. Upgraded 2 separate iPhone 4 to iOS 5 and now both get an error that say "incorrect password" when trying to connect. iPad 1 upgraded to iOS5 and all 3 macs connect fine using same password. (Router is Apple Airport base station running 7.5.2)

  • Macbook air is unable to connect on hidden wireless network

    Dear users and support,
    I have just bought my macbook air with lion os already installed, but I am unable to connect to hidden wireless network. Is there any trick to fix it? even though I am typing the name and password it's unable to login.
    Please advice.
    tks,

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reset the System Management Controller.

  • Suddenly can't connect to home wireless network

    All of a sudden I can't connect to my home wireless network - always has worked perfectly.  Now I get a box asking for the password, and although I type it in correctly it keeps saying "incorrect password."  I thought I'd delete it and re-establish it, but it doesn't show up in the Managed Network settings.  Any ideas what is going on?

    On the problem computer, go to Control Panel > Printers and delete all instances of the printer.
    Next, print a Wireless Network Test from the front of the printer (Network menu).  Note the printer's IP address.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • IPhone GPS location incorrect when connected to home wireless network

    Hi all,
    My iPhone GPS works well except when I am at home and connect to my wireless network. It always gives the same incorrect location about 3km away from my house. When I turn wireless off then the phone gives my correct location.
    I think it is somehow getting confused when connecting to my airport. (I wonder if it is showing the location of the local telephone exchange?)
    Has anyone else encountered this problem or found a solution? Or can I somehow tell my airport where it is?
    Thanks!

    A company called Skyhook Wireless maps WiFi and cell tower locations it scans. Apple uses this to help your GPS locate itself quicker. Here's how it works: http://www.skyhookwireless.com/inaction/apple.php
    If your WiFi has not been scanned properly, you can submit a WiFi location update by going here: http://www.skyhookwireless.com/howitworks/submit_ap.php

  • IPad won't connect to home wireless network

    Got my iPad for Christmas and it has worked perfectly until tonight. Out of the blue it wasn't connected to my home wireless network. I reset the modem, powered the iPad off and on again, reset the network settings and reset all settings. No luck, it just keeps searching all of the laptops in the house work just fine ??

    Hi HugBeth - Welcome to the forums.
    Notice the links other posters provided above? Follow those links and then come back and thank those folks that took the time to pass along problem-solving advice.
    Pam, you might wish to checkout these resources as well:
    I prefer this list of solution oriented suggestions as a starting point: http://tinyurl.com/3yorao9
    You'll also find an ongoing discussion in this forum entitled: "Weak Wifi" I have also included the link for you- http://tinyurl.com/2ctu39q It contains additional problem-solving steps undertaken by users when they found the standard solutions for missing & weak connections did not apply to them.
    Good luck.

  • Unable to connect laptop to wireless network

    My MacBook Pro will not connect to my wireless network, but my iPad does so I know it must be a problem with my computer rather than the network. Any suggestions?
    I'm not sure if there is some obscure setting that I need to change.

    Give us more information, please.
    Is your wireless network supplied by your ISP, your landlord, your own router, or something else?
    What can you tell us about the settings on your wireless network? (Not the passwords.)
    Did this ever work, or is this the first time you have tried to connect the MBP to this wireless network?
    What model/year MBP is this? It has to be somewhat old if it is running Snow Leopard (10.6.8) as per your profile.

  • Unable to connect to new wireless network in Mountain Lion with Photosmart C4780

    I have a Photosmart C4780 and have just upgraded my imac to Mountain Lion. HP are not providing new drivers for my printer as they say it will work with Mountain Lion. I have downloaded software updates. However, I have just changed my wireless network as I have a new broadband provider but am unable to connect to it. My problem is that the set up assistant software provided which I used originally to set up does not work with Mountain Lion.
    Any ideas please?

    I have solved my problem, I've bought an Epson. It works perfectly. If HP can treat their customers with such disinterest and contempt I don't want to give them my money. 

  • Why is my iphone 4 unable to connect to my wireless network?

    When I try to join my wireless network it say ' unable to join network' . I had no problem connecting with my laptop.

    Try rebooting the router. Just unplug the power for a few seconds and reconnect. It does no harm.

  • IPhone 4 suddenly stopped connecting with home wireless network

    Upon getting a new wifi router, initially my iPhone 4 connected. Last night I lost wifi conneciton on it and cannot get it back. Updated to IOS 7.1 to see if it would help. Nothing. Have reset network setings, gone into airplane mode and attempted hard restart. Have also reset modem. The phone worked on another wireless network and all other devices in our house are working fine. Does anyone have any insights/ had this problem before? House network is Bell Fibe.
    The phone can see the wirless network but when we go to connect it infinetly spins.
    Thanks!!

    Hi garth_w,
    If you are having issues connecting to your home network from your iPhone after a change in routers, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    https://support.apple.com/kb/TS1398
    Regards,
    - Brenden

  • My iPad2(Wifi-16Gb) unable to connect to home wifi network after upgraded to iOS6. The said network is a remembered network and never face this connection issue before iOS6.

    Forget and reconnect the netwrok doean't solve the problem.
    Even Network Reset recommended in others iPad user in the forum can't help as well.
    Please advice. Thanks.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Macbook (10.4.11) unable to connect to one wireless network

    We have one student who is unable to connect to our student wireless network. He's using a Macbook (black) with 10.4.11 and all updates. He's got a stock Airport card. We have an Airport Extreme broadcasting the network. Other students are able to connect without any problem. He's able to connect to our teacher's network without any problem.
    When we try to connect his airport to the student network, it reports "There was an error joining the AirPort network 'Riverstone Students'." No further information is provided. I've tried removing it from his preferred networks, removing the key from the keychain, and reconnecting, but no change.
    Any suggestions gratefully received!

    Just found out a little info about my work network. We are using a SMC Network 8014 W-G broadband modem and a Linksys WAP11 Wireless Access Point, and the security is WEP. I have tried to login to the device webpage to check/adjust settings but nobody here knows the password and "admin" doesn't work. I really don't want to do a hard reset and take the chance of screwing up the network for everybody in the office (apparently it was quite complicated to set up when they first installed it, I wasn't around then). Does anybody have any other ideas? Thanks

  • How to connect to home wireless network

    how do I connect to a home wirelss network?

    Jointing a WiFi network.
    http://www.apple.com/support/ipad/assistant/wifi/

Maybe you are looking for