Unable to connect to HP Officejet Pro 8100 wireless printer: Unsuccesful Network Connection

Unable to set up the wireless on my new printer.
Error message: Unsuccessful Network Connection.
The printer was unable to install over the network.
I have printed the diagnostic report (HP Network Configuaration Page). There are no error comments on this page.
Under Wireless title, my correct WIFI isted under Network Name; however the status says disconnected.
Under Diagnostic Results title; Connectivty - Connected - PASS
Wireless - ON
Wireless Working - PASS
Signal - Very Good
I connected the USB cable as instructed in the wizard. Does it have something to do with when to disconnect this cable?

Hi,
You dont have to fiddle around with the wireless channel and calling your isp and all, i install these every day to my customers, when i get any issues i follow these three methods, one of them works
HP Printer Wireless Setup
HP Automatic Wireless Configuration or (HP Auto Wireless Connect) HP printer Wireless Setup, includes Auto Wireless Connect technology that allows connecting the printer to the wireless network automatically without having to connect any cables or enter wireless network settings such as wireless password or id. All new HP printers will have this capability during the software installation process. In some cases computers or the network configurations are compatible with HP Auto Wireless Connect. In these cases, an alternate wireless setup method will be offered. To be compatible with HP Auto Wireless Connect, the following conditions must be met: Your computer uses Windows Vista, Windows 7, Windows 8, Mac OS X 10.5 +. Your computer uses a wireless connection to your network and the operating system is in control of the wireless adapter so that the HP Software can retrieve the computer’s current network settings. Your computer is connected to your 802.11b/g/n wireless router over a 2.4 GHz connection.
NOTE: HP Printers are currently not compatible with 802.11n 5.0 GHz networks.Your computer does not use a static static IP address. Your printer is in HP Auto Wireless Connect mode. The printer will be in this mode for one hour after it is first powered on during installation before it is connected to a network. If your printer has been powered on for more than one hour and the software has not yet tried to connect the printer to your wireless network, you can reset this mode by using the Restore Network Defaults option from the printer control panel. Refer to your printer documentation for how to perform Restore Network Defaults. Other environmental and technical factors may also affect whether HP Auto Wireless Connect is offered.
If HP Auto Wireless Connect is offered during the installation of your printer, it is the recommended setup method. Part of the setup process requires your computer to be temporarily disconnected from your wireless network. During this time you will not have Internet access. Be sure to save any online work and/or downloads before continuing with this setup method. To use this option, install the software for your printer and follow the onscreen instructions. When prompted, select the “Network (Ethernet/Wireless)” connection type and then choose “Yes, send my wireless settings to the printer (recommended)”. That’s it! The HP software will do the rest. If HP Auto Wireless Connect is not offered during the software installation or if it is not successful, you will be guided to use another wireless setup method.WPS (Wi-Fi Protected Setup)WPS (Wi-Fi Protected Setup) – WPS has two modes to connect devices together over a wireless connection. One is called “pushbutton” and the other is called “PIN”. Pushbutton is by far the easiest method. We will describe how to connect using the WPS pushbutton method, but not the PIN method.
For instructions on starting WPS on your printer consult your printer’s manual. However there are some conditions that need to be met in order to use WPS pushbutton mode:
Both your printer and wireless router must support WPS pushbutton mode. Consult your printer and wireless router manuals. The wireless router must have a physical WPS pushbutton available. Your network must use WPA or WPA2 security. Most WPS wireless routers will not connect using the WPS method if WEP or no security is used. Most WPS wireless routers will not connect using the WPS method if you are using the manufacturer’s default for the network name and no security.
To connect your wireless printer to your wireless router using WPS. Start the WPS pushbutton mode on your printer. For instructions on starting WPS on your printer, consult your printer’s manual. Within 2 minutes, press the WPS button on your router.HP Printer Wireless Setup – The Wireless Setup WizardThe Wireless Setup Wizard, which you run from the printer’s control panel. Make sure you know your network name and your security password (WEP or WPA). On the printer’s control panel, press the Setup button and then select the Network menu. The Wireless Setup Wizard displays a list of wireless networks in the area. Note: The Setup button may appear as a wrench icon. There are differences between product models. Select your wireless network’s name from the list. If you don’t see your wireless network listed, you can enter your network name manually by scrolling to the bottom of the list. If you enter the name manually it must be exact, including upper and lower case characters. Enter your WEP key or WPA passphrase. You must enter the key or passphrase exactly, including upper and lower case characters. Your printer should connect to your wireless network. If it does not connect, you are given the opportunity to print a Wireless Network Test report that will help you find out what may be wrong.USB Setup of WirelessUSB setup of wireless – Some HP wireless printers can use this wireless setup method during the printer software installation. During this process you’ll temporarily connect a USB cable between the computer and the printer. It’s important that you connect and disconnect the cable only when prompted by the software, which will guide you through connecting and configuring your printer’s wireless connection. In some cases the software may automatically find your wireless settings for you.To connect your wireless printer to your wireless router using USB setup of wireless, proceed to Installing Printer Software.
Source:- http://hpprinter.techport45.com/hp-printer-wireless-setup/

Similar Messages

HP Officejet Pro 8600 Premium printer LOSES NETWORK connection daily

I've had my printer for a few years. I've had no problems with it. Suddenly in the last week it refuses to maintain it's network connection. It is WIRED. It has a STATIC IP. The router is set up to reserve this address for the printer.
I have uninstalled ALL HP software, downloaded the current versions and reinstalled. It works fine. If nothing is printed for a period of time (not sure the interval) it refuses to find the printer.
Powering off the printer will reset it to work fine.
I've checked EVERYTHING.
There is one article about this happening on Windows XP and talks about changing the ink alert but I've tried following those instructions and I canNOT find anything it is talking about.
I verified that printer is using current firmware.
When it loses it's connection to the network the router can't see it either.
HELP. It is most annoying to have people yelling at me all day to fix the printer.
NOTHING has changed on my printer set up.
The only changes to my network recently were installing 3 IP cameras and adding port forwarding for ports 2604, 2605 and 2606. If that were causing an issue I'd expect it to NOT print at all. After reboot it prints fine until it goes a period of time without printing theni t disappears from the network again.

Hello smsdavis, and welcome to the HP Forums.
I see you are running into connectivity issues. I would like to try and help.
I would recommend powering down the computer and printer. Once they are both off, remove the power cord from the wireless router for 60 seconds, and plug it back in. After the router begins broadcasting, power on the printer and the computer.
I would also suggest utilizing this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Officejet Pro 8000 wireless printer is "not connected."

My Office Jet worked like a dream until I had to change my network settings, specifically my wireless network password. I reconfigured the printer with the new password, but now whenever I try to print, I get an error message saying the printer is 'not connected.' If I connect via USB cable, it works fine.
The network configuration printout shows that the printer is connected to the wireless network and the diagnostics (wireless on, wireless working, etc) all read PASS.
I am using a MacBook.
Help?

try this on the touchscreen of your printer ...
- go to "Setup"
- select "Network"
- make sure the "Wireless Direct" feature is enabled
I was having the same problem(s) and this solved my issue

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop

HP officejet Pro 8100 will print from an Iphone but not from my windows laptop. I get an error stating "unable to communicate with printer"

Hi Melatina66,
Welcome to the HP Support forums. I understand that when trying to print from your laptop that you get a communication error message.
To better assist you, would you please provide some further information:
1)       How is the printer connected (USB cable, ethernet or wireless)?
2)      When you installed the printer on your laptop did you set it up with a USB cable? If yes, did you switch the connection type on the laptop from USB cable to ethernet/wireless?
3)      What version of Windows operating system are you running on the laptop (Windows XP, Windows Vista, Windows 7, or Windows 8, etc)?
4)      When printing from your iPhone are you using Apple's AirPrint or HP's ePrint app?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet Pro 8500a wireless printer hangs up when printing document.

I have an officejet pro 8500a wireless printer and it has been working flawlessly. Now all of a sudden it hangs up when sending a document to it. It will say "now printing", with the red "x" and just sits there looking at me. I have discovered that I can open the printer lid and close it and it will then print??????
Also when I click on "apps"on the printer menu screen, it tells me, "unable to connect to the server".
Anybody experience this problem??

I too have this issue with my HP8500a Plus.
I have managed to narrow down the issue to one of the cartridges. Whenever this cartridge is inside the printer, the issue will happen. If it's not, then the issue disappears!
I have tested this discovery on TWO different hp8500a printers, and they both react to this "special" cartridge the same way: its presence inside the cartridge tray triggers the issue.
There is only one thing that makes this cartridge any different form the other ones: even though it IS a genuine HP cartridge, it has been refilled and the max allowed page count has been hit. The issue started happening only after the max allowed page count has been hit.

HP Officejet Pro 8000 Wireless Printer - A809n.says it's out of ink but has new cartridge

about 6 monhs ago the printer stopped printing stating it was a out of ink (black) after i replaced the cartridge it stopped again after about 10 days. i contacted HP and they basically told me to get a new printer. i decided to try a new cartridge again and reboot etc, etc. it still would work i use my other HP printer before looking to buy another. i read on the internet that this was a frequent problem with the HP Officejet Pro 8000 Wireless Printer - A809n. and it might be an printhead problem. i replaced the printhead and any low or outdated ink cartridge. the printer worked perfectly for 4 weeks. now i am having the same problem. this sticks. it is leaving a bad taste . i have been a loyal HP user i feel HP has made a questionable product and is not standing behind it.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet Pro 8500 wireless printer says there's a paper jam. No jammed paper found. Windows Vista

Officejet Pro 8500 wireless printer says there's a paper jam. Have followed all the steps suggested on HP site...No jammed paper found. Using Windows Vista.
Read on ablog that there are sometimes false "paper jam" notices. Anyone else experience this problem?

1cairobeller,
Here is a link to a post where someone else had the same issue as you. In this post is a video that will walk you through some steps to fix this issue.
Hope this helps !
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/officejet-pro-8500-wireless-says-clear-...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

My Officejet Pro 8000 wireless printer prints to only 4x5" on 8x11 sheet when printing mult pages

My Officejet Pro 8000 wireless prints to only 4x5 inches on the 8x11 sheet when I try to print multiple pages per sheet from an Adobe file. The print preview shows the paper dimensions to be 8x11, and the four Adobe pages are properly scaled to fill the 8x11 printed sheet, yet when printing, all the printing is condensed to the upper left quarter of the sheet.

What did it? I was still trying to figure it out

HP Officejet Pro 8000 Wireless Printer: Still getting vertical white streak on copies

HP Officejet Pro 8000 Wireless Printer: Still getting a vertical white streak down pictures. I have changed the yellow/black printhead. One helps note says I should try cleaning the scanner glass. Where is the scanner glass, and how do I get to it?
Any other possible solutions for getting rid of the vertical line? Thank you.
This question was solved.
View Solution.

HI,
THis looks like a issue with the printer itself as it indeed is a vertical mis. A cartridge issue would cause a horizontal issue. What you can tru is cleaning the carriage rod, the metal bar that you see in the printer, and carefully clean the transparant strip. Do this very carefully as its pretty delicate and if it breaks the unit is ready for trash.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HP Officejet Pro 8100 Wireless Connectivity Issue

Hi, I've just purchased the HP Officejet Pro 8100 and have not been able to connect via wireless to the home network. I've tried connecting to 3 different routers and no success. Steps I took were as follows.
Steps:
1. Insert Driver CD
2. Install HP Driver Software
3. Follow on screen prompt for wireless connectivity
4. Was prompted to connect USB cord temporarily
5. Prompted to select SSID
6. Prompted to enter WPA Security Key
7. Screen saying your printer failed to join the following Wireless network.
8. Humored myself and read all the troubleshoots. No good.
9. Downloaded and Flashed new firmware to Printer. New Firmware installed. Still did not help.
*One thing to note: On the Failure to connect to Wireless network Error on Step #7 it says something about MAC address filtering and to enable the above MAC address. The funny thing is there is no MAC address supplied above. The field is blank. All that aside, MAC address is disabled in the first place anyway. Just wondering why the printer software doesn't know the printers own MAC address.
Attempted to setup printer on the following routers...
Router #1
Router: e4200
Local IP: 10.0.0.1
Subnet: 255.255.255.0
DHCP Range: 10.0.0.10 to 10.0.0.59
SSID: "Kosmos 2.4" and "Kosmos 5.0" 2.4ghz and 5ghz bands respectively
Channel Width: 20mhz or 40mhz
Wirless Mode: a/b/g/n
Security Mode: WPA or WPA2 Mixed Mode
Router #2
Router: EA4500
Similiar Setup as Router #1
Router #3
Router: 2wire 3801HGV
Local IP: 192.168.1.254
Subnet: 255.255.255.0
DHCP Range: 192.168.1.64 to 192.168.1.253
SSID: "u2" *Eliminated Spaces in SSID
Wirless Mode: b/g
Security Mode: WPA2
If anyone could shed some light that would be great. Otherwise I guess ill be returning it very soon.

Now you know why you were unable to connect.
Absolutely. It should be broadcasting its own SSID.
This link goes to a factory reset document for your printer.
is your printer still in warranty?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP officejet pro 8100 not printing documents when asked, and slow to respond.

My Officejet Pro 8100 has allways been used wireless. It allways had a lag when asked to print and producing the document. Often the unable to connect to printer message comes up, then shortly latter it started to print.
We have now switched to Vergin Media ISP. The printere was set up to the new network as before no problem. The router is lacated downstairs by by our TV where the cable enters the house. Our 2 pc's are now wireless due to this (one windows XP and one Windows 7). Then there's Ipads etc.
Conectivity is not a problem the pcs are located in our study with the printer upstairs. My Ipad works in the Garden so theres plenty of range. All devices are on the same conection.
The problem with slow printing is now worse. Ask to print and often nothing happens. Switch printer off/on and it may print the last comand of not. It may accept the next command to print or not. Indescrimnently it may print 'misssed prints' at any time.
Basically it cannot be relied on to print when asked to, really frustrating!! The printers wireless indicator is lit its conected to the network. Any ideas as this is a real pain. Remote printing from a phone is a no go as it probably wont happen.
We need to print and it happen.

Hello @Ants9,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the slow printing issue that you're experiencing with your networked HP Officejet Pro 8100 ePrinter from your Windows computers and other devices. I understand that this issue began with your original router and now is occuring with your new network. I am going to run you through some troubleshooting steps below to resolve this issue.
Step 1: Run Print and Scan Doctor:
To verify that your printer is properly detected on your Windows XP and Windows 7 computers I would like you to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computers and 'fix printing' issues for you. Should any driver, connection, or software conflict be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
Please click here to download the HP Print and Scan Doctor Tool. Please download this Tool on your Windows XP and Windows 7 computers.
Once the Tool has completed, please test printing again. Should the issue persist, please proceed to the next step.
Step 2: Powercycle Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
After a few minutes the internet connection will return. Please check on your Windows computers and ensure that you're able to browse to websites before continuing. Once the network is up and running again please test printing to check the printing speeds.
Should the issue persist, please proceed to the next step.
Step 3: Update Firmware:
There is chance that corrupted programming in your printer could be causing the slow printing issue. Therefore, I am going to have you update the Firmware Version on your printer.
Please click here to download the latest programming on your printer. Once the website opens select the Download button on the top left. Follow any onscreen instructions to send the Firmware Update to the printer. This update can be run from either the Windows XP or Windows 7 computers.
Please test printing again to verify if everything is now working as it should be.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Officejet Pro 8100 not printing from PC

Have a HP Officejet Pro 8100, suddenly stopped printing from PC, noticed base shaped symbol showing up above ink display, on/off button also is flashing when print is requested, checked printer status stating there is an error. Using Microsoft office 2010

Hello,
Please try the below steps..
While the printer is ON, unplug the power cord from back of the printer.
Wait for 30 seconds.
Plug in the power cord to the printer.
Wait for the printer to go silent.
Remove and re-insert the ink cartridges.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet Pro 8100 - Not Printing

New HP Officejet Pro 8100 - driver installed for wireless network printing.
Printed Test Results - "No Problems Found....successful setup of your wireless printer".
However, when I try to print I can see the request in the print screen, but it says "Print file was not accepted". This is happening from the computer the driver was installed on (Mac OS X Ver 10.8.4.
When I try from another iOS device, I can see the printer, and can request the print job, It says its sending to the printer, but the job never shows up in the print que and doesn't print.
Help!!

What router? Have you restarted it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8500 wireless printer

How can printer be set to only print black and not color?

1cairobeller,
Here is a link to a post where someone else had the same issue as you. In this post is a video that will walk you through some steps to fix this issue.
Hope this helps !
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/officejet-pro-8500-wireless-says-clear-...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Unable to connect to HP Officejet Pro 8100 wireless printer: Unsuccesful Network Connection

Similar Messages

Maybe you are looking for