Unable to connect to internet through befw11s4 router v4

I have the latest firmware 1.52.03. I can connect directly to the modem but routerwon't connect. I was looking for a older firmware to downgrade because i just upgraded it 2 weeks ago. I don't know whatelse to do.

Yes and on your previous post, you said that even when the computer is directly connected to the modem, the internet is still slow.
Anyway, please follow the instructions from the link below. Let's just give it a try.
Setting Up a Router with Cable Internet Service

Similar Messages

I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

I am unable to connect to internet through my TATA PHOTON + ZTE device.
Please help.

https://discussions.apple.com/thread/3680625?tstart=30
Best.

Can't connect to internet through netgear95 router

Can't connect to the internet through a netgear95 router. my PC connects to internet ok, none of my apple stuff (iphone/ ipad) will connect though. Must be something in settings on router.
Scott

Hi Scott,
Do you have any Wireless devices that connect to the router? I'm assuming that your PC may connect via Ethernet cable?
Regards
Steve

Unable to connect to Internet through KRZR - please assist

Hi folks.
I have paired my KRZR K1 to my Macbook. In order for me to use bluetooth and connect to internet on the Macbook I need to input some info on the Macbook. Through reading he different forums I have inputted the following info:
Tel #: WAP.CINGULAR
ACCT Name [email protected]
Password CINGULAR1
I then try to connect and gives me an Internet Connect error box on my Macbook that says, "A modem error occurred. Please verify your settings and try again."
I have a Media Net plan with unlimited data as part of the plan.
What am I doing wrong?
Also when I first paired the phone to the Macbook in the final step it asked for a CID but I left it black. Is that my problem? Was I supposed to put something in there? Should I re-pair with any other specific information to get this to work?
Your help is greatly appreciated!
Jason

thanks!

Mavericks Bluetooth unable to connect to Internet through Bluetooth pan

Im trying to connect my MacBookPro running Mavericks to the Internet through a personal hotspot on my iPhone. This works fine with my wife's MBP running Mountain Lion, but I can't get a connection to the Internet. Diagnostics shows that I have a good connection to the phone and ISP, but Internet and server are red.
Any suggestions?
Thanks,
Mike

Yes but not to app world, just turn on wifi and set up
Pearl 9105 6.0 Bundle 2950
Playbook 2.1.0.1032

Unable to connect to internet through iphone

Hi all
I have some trouble connecting to internet throught iphones or ipads using internet sharing. Ive tried both bluetooth and cable.
Any ideas where to start?

Thanks for the reply.
I dont believe that the issue is with the iphone. I can connect to internet with the same phone on another computer. It´s just this computer that cannot connect with any iphone. Tried several.

Mac will not connect to Internet through nighthawk router

my new iMac shows I'm connected to Internet but I can not connect. All other devices do.

Your choice of course but then you have all the various of using MS Windows, viruses, maintenance, etc.
You may find this article useful to help you troubleshoot your networking issues. http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/

Unable to connect to internet through Wi-Fi or Bluetooth

It seems like Sept 9, 2012 at 1:07AM was the last known time at which my ipad connected to the Internet eother through known wi-fi networks - two at work and one at home. I also tether my iphone (through ATT's network) to my ipad. I am also unable to do that as well. My Mac and iphone connect to all these networks without difficulty. I followed troubleshooting instructions on Apple troubleshooting page to no avail. Basically the ipad is useless to me without the internet. I am not going to update or reconfigure the routers at home or work because all the other computers, my daughter's and husband's work fine. It's just the ipad that has stopped communication with the outer world.

Yes but not to app world, just turn on wifi and set up
Pearl 9105 6.0 Bundle 2950
Playbook 2.1.0.1032

Spaces application is unable to connect to internet through proxy

hi ,we have developed a portlet which reads weather from XML file from the following URL :
http://free.worldweatheronline.com/feed/weather.ashx?q=Riyadh,SaudiArabia&format=xml&num_of_days=2&key=d35160acaf083722112707.
this works fine at our offices because we don't have a proxy server ,but when we implement this on client environment,the application fail to connect .
I've added proxy server IP and Port to the general proxy configuration on the server ,but it still no working .
i have webcenter 11.1.5 installed on oracle Enterprise Linux 5.5 64-bit .
i used this java option (JAVA_OPTIONS=${JAVA_OPTIONS} -Dhttp.proxyHost=172.16.1.20 -Dhttp.proxyPort=8080) i but this in setDomainenv but i have the same error ,is it possible that i put this option on a wrong place on the file ?
my application is deployed on admin server and on portlet server .
log files say nothing about this ,i don't know why !
can anyone help please ? tell me if you need anything from me to post .
regards

Please refer to below URL for proxy settings.
http://docs.oracle.com/cd/E25054_01/webcenter.1111/e12405/wcadm_rss.htm
Thanks & Regards,
Murali.
===========

When using wifi hot spot, firefox blocks transfer to such website and hence unable to connect to internet through such hot spot

Application Basics
Name: Firefox
Version: 30.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:30.0) Gecko/20100101 Firefox/30.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Garmin Communicator
Version: 4.2.0.0
Enabled: true
ID: {195A3098-0BD5-4e90-AE22-BA1C540AFD1E}
Name: Adobe Acrobat - Create PDF
Version: 1.2
Enabled: false
ID: [email protected]
Name: Skype Click to Call
Version: 7.2.15747.10003
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Important Modified Preferences
accessibility.blockautorefresh: true
accessibility.browsewithcaret: true
accessibility.typeaheadfind: true
browser.cache.disk.capacity: 0
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.enabled: false
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243
browser.startup.homepage_override.buildID: 20140605174243
browser.startup.homepage_override.mstone: 30.0
browser.urlbar.default.behavior: 2
dom.mozApps.used: true
extensions.lastAppVersion: 30.0
gfx.direct3d.last_used_feature_level_idx: 0
network.cookie.lifetimePolicy: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1403603792
places.history.enabled: false
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.cpd.offlineApps: true
privacy.cpd.siteSettings: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1402895491
Graphics
Adapter Description: Intel(R) HD Graphics 4000
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0166
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 12-18-2013
Driver Version: 10.18.10.3379
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: true
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.6
Version in use: 4.10.6
NSS
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSMIME
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSSL
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSUTIL
Expected minimum version: 3.16
Version in use: 3.16

Did you get an error message? What did it say?
'''Control Panel\Network and Internet\Network and Sharing Center'''
Check the settings for that WIFI.

I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Wrt300n unable to connect to internet

I am unable to connect to the internet through my router. If I connect my modem directly to my ethernet card I have no problems at all. I have reset the router several times and tried several ideas off the interent with no luck at all. could anyone help me with this problem.
Ps. I have point to point internet access. All my trouble began after trying to install the software that came with the router.
Thanks

Uninstall the software.
Press the reset button on the router for 30 seconds. The Power light will start flashing. Turn the Router and the Modem OFF. Turn the modem ON first, wait for 10 seconds, turn the router ON, wait for 10 seconds, you should be ONLINE !!!
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Can't connect to internet through WRT54G

I can connect to the internet through DSL modem but cannot when going through the WRT54G. All lights on router lit correctly. Actually set up this router 6 months ago or so and worked both wired and wirelessly for awhile. Then could only access internet wirelessly with laptop. Started messing with the router to get it to work wired with desktop but now won't work. Can access the router set-up page but not sure what to change. Saw somewhere to change the routers IP address to 192.168.2.1 didn't solve the prblem. Have tried restoring factory defaults, recommended power on/off sequences (modem, router,pc) and holding reset button for 30 seconds. Also tried Easy connect tool on the Linksys site. Icon in lower right of pc screen indicates status as connected but still cannot connect to internet. Any help is very much appreciated.
Scott

I had the very same problem with the same model router. It turned out to be the Security setting in Internet Options. The security setting was on Medium. After changing it to Medium-Low, I could connect to the internet through the router.
If you are not familiar with changing the Security setting, let me know and I will reply with the steps to take.
Dale
Shelby, NC

Unable to connect to internet through befw11s4 router v4

Similar Messages

Maybe you are looking for