Unable to connect to internet with iPod Touch

Hello,
I received an iPod Touch for Christmas but cannot connect to my wireless network at home.  I have spent a lot of time talking to Apple Techs and they tell me that I need to update the firmware of my router.  My router is an Actiontec MI424WR.  When I attempt to connect, the iPod says it "connects" to my SSID but when I launch the browser, it says "cannot open page because the server stopped responding."   The IP adddress on the iPod starts with "169" but Apple says it should be "192."  Apple says the router needs to be updated with newer firmware.  Can anyone direct me as to how I can update the firmware for this router?  Any help would be greatly appreciated.  Thank you.

I have the same router that you have. In my house we have a 1st gen and a 2nd gen iPod Touch as well as a 1st gen iPhone and 2 2nd gen iPhones that all connect to the Verizon router. I did have to redo the settings on the 2nd gen iTouch several times before it would work. I do not know if I was fat fingering the WEP or what but once it started woking on xmas morning it has been fine since.
Just go thru and triple check your WEP key and make sure that you are entering it in correctly and you should be fine.

Similar Messages

  • Unable to connect to internet with ipod 4G

    I am using my home wi-fi and get as far as the password, then after a few secs it tells me that it cannot connect and the only option is then to 'dismiss'?

    - Does the iPod connect to other networks?
    Try:
    -- Reseting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -- Powering off and then back on your router
    -- Resetting network settings: Settings>General>Reset>Rest Network Settings
    -- The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Post Moved Unable-to-connect-to-internet-with-spe...

    post moved http://community.bt.com/t5/Other-BB-Queries/Unable-to-connect-to-internet-with-specific-computer/td-...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Ok..So you mean still cannot accessing the website with Internet connection? Try to use nslookup in command prompt to check whether can resolve domain name correctly. Also make sure you can ping the router's LAN IP from computer.
    If not, you can try to use the following DNS servers from OpenDNS.com:
    208.67.220.220
    208.67.222.222
    Hope helps..
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

  • Sharing internet with iPod touch

    Now, what I have is a MacBook with OS 10.5.4 installed and my Internet connection is through cable modem and it's a Ethernet Connection and I want to share my Internet through Airport with my iPod Touch.
    I have followed the instruction about "Sharing your Internet connection", but it is still not work.
    In my iPod touch, I can see the IP Address 168.254.13.167 and the Subnet Mask 255.255.0.0 only. The Router and DNS is blank. Also when I open the safari with iPod touch, the error message " Safari can't open the page because it can't find the server" is shown. Why is that? Please help me and sorry for my english.

    Try unplugging the cable modem, wait, and then plugging it in again.
    -----> I tried, but it's still not work
    Is this your system: cable modem -> Airport (expess? extreme?) ---- Macbook / iPod Touch?
    ------> For my system, cable modem -> Macbook (Airport extreme)
    Is there another router in the picture? The 168.254.13.167 IP address doesn't look like an Apple IP. It should look like 10.XX.XX.XX.
    -------> what do you mean of "in the picture"
    Also the System Preferences>Network>AirPort, in the Status field, is said "the AirPort has a self-assigned IP address and may not be able to connect to the Internet. "
    Message was edited by: thistle1020
    Message was edited by: thistle1020

  • Is the iPad camera connection kit compatible with iPod touch 4?

    It has the 30 pin connector, so it it compatible with iPod touch 4?

    No. You get an error that says not supported.

  • I can no longer connect to the internet with iPod touch

    My ipod touch just stopped connecting to internet at home and elsewhere. Because it won't connect, I am unable to retrieve the serial number from the settings, which is what Apple support requires before they will help me. The other problem I have is that it won't stay charged and the date/time changes. This happened before I could make the most recent update. Any ideas?

    What model iPod?
    I suspect the battery is on its last legs or another hardware problem based on the numerous problems but try:
    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Unable to connect to internet with cable modem

    I have a Imac about 2yrs old. Was running beautifully until lately. My modem shows all solid lights but for some reason it is unable to connect. Did all the things like rebooting, takng out the power cord on my modem letting rest a minutes. Changed the setting to manual from DHCP. Changed it back the other way.
    Can someone help me,
    Biscuit's

    Now when you plug your iBook directly into the modem, the internet works. Correct? Which Airport do you have? Try resetting your Airport. Below are some more links that should be useful...
    Knowledge Base Document #106858 is the Airport Troubleshooting Guide
    Knowledge Base Document #107451 on Resetting the Airport Extreme Base Station
    Knowledge Base Document #106602, which explains How to Reset the Airport Base Station (Dual Ethernet)
    Knowledge Base Document #58613 - Resetting the Airport Base Station (Graphite)
    Airport Express FAQ
    Knowledge Base Document #108044 on Resetting Airport Express
    Knowledge Base Document #166602 troubleshoots I Don't See My Airport Network
    I didn't know what Airport you had, so I included all of them. Select your model and try reseting it. If worse comes to worse, just do a Factory Settings Reset. You will have to configure it like you just took it out of the box. I have found that this usually fixes most AirPort problems.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Can't connect to BTFON with IPOD Touch?

    Help please - am connecting to my Homehub fine with my IPOD Touch, however when I try to connect using BTFON I get an error message saaying this Wi-Fi Hotspot is temporarily unavailable.

    Chenehouse wrote:
    No I can't connect manually either.
    It also won't connect to BTOpenzone - just to my homehub.
    Is it the openzone associated with your own homehub or another location, there have been instances where the public side of the HH has locked up stopping connection with it, a reboot "should" clear the lockup
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Unable to connect to internet with my WRT54G router

    I had no problem until a few days ago.  I have it under a secured mode and wanted to unsecure it temporarily.  I got into the 192.168.2.1  and clicked the security tab and got a clock that never seemed to come back to i closed the window.  I went back into internet explorer and could not get into the internet.  I get a popup in lower right saying  Local Area connection.  This connection has limited or no connectivty.  You might not be able to access the internet or some resources.  For more information click this message.   
    Then I get
    Windows could not finis repra the problem because the following actin can not be completed.  Renewing your IP address. 
    I do a setup and get a message
    Unable to connect to the router
    I try pinging the 192.168.1.1  and it times out.
    I do a diagostic and 
    HTTP Error 12007  connecting to www.microsoft.,com  shows up many times.
    I have an Actiontec 701 DSL modem.  I can get into the internet using that only.
    I've tried resetting the router, I've done   what appears to be a firmware upgrade (lights blink etc),  I've tried different power up sequences,  I've tried re-booting.
    What more can I try?

    As of now you are not able to login to your router setup page, and you are getting an error message "Limited or no Connectivity". First you can try is Unplug the Power from your router, wait for 1 min and reconnect the power to your router and check if you connected to the router or still you are getting the same error message.
    If still the same problem persist then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • I can't connect JBL Flip with ipod touch 4th generation

    I connected the JBL Flip with my MacBook Pro and it worked fine, music was coming out of the JBL. When I try to connect from my ipod, it does not. I turned bluetooth ON on my ipod, then "Searching..." is displayed and the speaker never shows up. Any tips on this? The user manual from JBL is useless.

    hi,
    i just opened the flip and  paired with one ipad and subsequently wanted to pair with my ipad.  my ipad kept searching and searching and could not find the jbl flip even though it was right next to it.  i had the same problem as the original post.   I think the following is  what ultmately solved  the problem.  first i turned off the blue tooth on the first ipad (not sure if this mattered) so the flip wouldn't be connected to it.  i could not find a reset nor how to take the batteries out simply on the flip. . I DID though hold the power button for quite a while on the flip.   I did this long enough for the red light (vs the blue light of the flip) to flash.  once flashing red i turned back on blue tooth on my ipad and it discovered the flip.  i touched the ipad screen to select the flip and then discovered the flip.
    I hope this helps

  • Why am I unable to connect to internet with my mac?

    When I try connecting my macbook air to the wireless internet it keeps saying the WPA2 password is incorrect but it isn't. Can I connect my mac to internet by using the rooter wireless button like I use to with my PC?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • Unable to connect to internet with my wireless router...... Shows Connected... Great signal...

    Hello, I really need some help.� 
    � 
    I have Verizon DSL and that works great when it is connected to my laptop with a network cable.� 
    � 
    I got a have a linksys wireless router (wrt54G)� �  and It works, � according to the network connections........ Connected and says the signal is great.
    � 
    � However when I an connected to my signal and I open up a browser window .... it says it cant find network....
    � 
    � I have reset the router...... and the Verizon modem....... 3 or four times........ I even went with the linksys step by step software CD twice.�  Nothing.....�  I can, however connect to my roommates wireless network, just fine.... but he is moving and taking his router with him so I need to get mine to work.
    � 
    I am new at the wireless networking thing so any hepl in laymans terms would be greatly appreciated.... thank you
    � 
    Melissa

    Ok......... finally fixed it.  seemingly, all that i needed to do was change my ip to 192.168.2.1.  WOW then it worked. 

  • Unable to connect to internet with hp laptop using xfinity router/modem

    Hi,I have a hp pavilion computer model dv9910us with windows vista hom premium OS.  I have an xfinity wireless gateway device modem/router.  I have had this at another location and it worked using verizon with a separate modem and router.  I also tried it at a xfinity location with a separate modem and router and it worked.  I got a separate wireless adapter and installed that and disabled the atheros ar5007 adapter in the device manager.  will that atheros 2011 adapter work with this model computer using the windows vista home premium os.  If so, could I leave the ar5007 disabled and install the 2011 to make sure it's ok before uninstalling the ar5007.  I'm really a novice and just stumbling my way through this.  Any help is appreciated.

    Hi: You should enable the atheros wireless card, and install this driver.  It will have no effect on the other one you are using. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_108905_1&swEnvOid=4059# Then shut down the PC, remove the usb adapter, reboot, and see if you can connect via the atheros card.  

  • Can't connect to wifi with ipod touch

    I was able to connect with my wifi for a couple of years and then all of a sudden it stopped working.  It looks like it is connected but isn't.

    Hello David,
    Work through each of the troubleshooting suggestions outlined in this article.
    http://support.apple.com/kb/ts1398
    B-rock

  • Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

    I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
    A month later, I am unable to connect to internet or print wirelessly.
    It states that I am connected to my router.
    When I trouble shoot, it cannot find the problem.
    My wireless connection and cable connection are fine on the MAC side.
    Please help.

    looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router?  Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Maybe you are looking for

  • Help me choose a Macbook Pro

    Hey everyone, I need some help in choosing which Macbook Pro is right for me. Basically I'm wondering which of these 2 would be a better choice. http://store.apple.com/us/product/FB471LL/A?mco=MTEzMjIzODU http://store.apple.com/us/product/FB471LL/A?m

  • Basic archive space requirements question from NON DBA :)

    I am a storage admin trying to get a better understanding of RMAN. My question is for backuplevel.1 does RMAN require free space to write archive information or archive logs to to complete this backup? My DBA says "no" after I requested that he clean

  • New Windows 7 machine, Word 2003 & Acrobat 8 - hangs making .pdf

    We got new Dell machines with Windows 7 and transfered all our existing software including Office 2003 and Adobe CS3. I can open and use Word seemingly find.  I can open Adobe Acrobat. When I try to create a pdf file using a word file (and I tried se

  • Channel Syntax in ChnDel vs. ChnAlloc in DIAdem 9.1 SP2c

    Hi, I just updated my DIAdem 9.1 to SP2c and found some inconveniences in the change of the syntax of ChnAlloc. Since SP2b you have to give just the name without the "Group/" part. But ChnDel still needs this! This is pretty ugly on working in loops.

  • HT4061 I can't power on my Iphone?

    I can't power on my Iphone?