Unable to connect to internet with my WRT54G router

I had no problem until a few days ago. I have it under a secured mode and wanted to unsecure it temporarily. I got into the 192.168.2.1 and clicked the security tab and got a clock that never seemed to come back to i closed the window. I went back into internet explorer and could not get into the internet.  I get a popup in lower right saying Local Area connection. This connection has limited or no connectivty. You might not be able to access the internet or some resources. For more information click this message.
Then I get
Windows could not finis repra the problem because the following actin can not be completed. Renewing your IP address.
I do a setup and get a message
Unable to connect to the router
I try pinging the 192.168.1.1 and it times out.
I do a diagostic and
HTTP Error 12007 connecting to www.microsoft.,com  shows up many times.
I have an Actiontec 701 DSL modem. I can get into the internet using that only.
I've tried resetting the router, I've done   what appears to be a firmware upgrade (lights blink etc), I've tried different power up sequences, I've tried re-booting.
What more can I try?

As of now you are not able to login to your router setup page, and you are getting an error message "Limited or no Connectivity". First you can try is Unplug the Power from your router, wait for 1 min and reconnect the power to your router and check if you connected to the router or still you are getting the same error message.
If still the same problem persist then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Similar Messages

Unable to connect to internet with my wireless router...... Shows Connected... Great signal...

Hello, I really need some help.�
�
I have Verizon DSL and that works great when it is connected to my laptop with a network cable.�
�
I got a have a linksys wireless router (wrt54G)� � and It works, � according to the network connections........ Connected and says the signal is great.
�
� However when I an connected to my signal and I open up a browser window .... it says it cant find network....
�
� I have reset the router...... and the Verizon modem....... 3 or four times........ I even went with the linksys step by step software CD twice.� Nothing.....� I can, however connect to my roommates wireless network, just fine.... but he is moving and taking his router with him so I need to get mine to work.
�
I am new at the wireless networking thing so any hepl in laymans terms would be greatly appreciated.... thank you
�
Melissa

Ok......... finally fixed it. seemingly, all that i needed to do was change my ip to 192.168.2.1. WOW then it worked.

Post Moved Unable-to-connect-to-internet-with-spe...

post moved http://community.bt.com/t5/Other-BB-Queries/Unable-to-connect-to-internet-with-specific-computer/td-...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Ok..So you mean still cannot accessing the website with Internet connection? Try to use nslookup in command prompt to check whether can resolve domain name correctly. Also make sure you can ping the router's LAN IP from computer.
If not, you can try to use the following DNS servers from OpenDNS.com:
208.67.220.220
208.67.222.222
Hope helps..
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Unable to connect to internet with cable modem

I have a Imac about 2yrs old. Was running beautifully until lately. My modem shows all solid lights but for some reason it is unable to connect. Did all the things like rebooting, takng out the power cord on my modem letting rest a minutes. Changed the setting to manual from DHCP. Changed it back the other way.
Can someone help me,
Biscuit's

Now when you plug your iBook directly into the modem, the internet works. Correct? Which Airport do you have? Try resetting your Airport. Below are some more links that should be useful...
Knowledge Base Document #106858 is the Airport Troubleshooting Guide
Knowledge Base Document #107451 on Resetting the Airport Extreme Base Station
Knowledge Base Document #106602, which explains How to Reset the Airport Base Station (Dual Ethernet)
Knowledge Base Document #58613 - Resetting the Airport Base Station (Graphite)
Airport Express FAQ
Knowledge Base Document #108044 on Resetting Airport Express
Knowledge Base Document #166602 troubleshoots I Don't See My Airport Network
I didn't know what Airport you had, so I included all of them. Select your model and try reseting it. If worse comes to worse, just do a Factory Settings Reset. You will have to configure it like you just took it out of the box. I have found that this usually fixes most AirPort problems.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Why am I unable to connect to internet with my mac?

When I try connecting my macbook air to the wireless internet it keeps saying the WPA2 password is incorrect but it isn't. Can I connect my mac to internet by using the rooter wireless button like I use to with my PC?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Unable to connect to internet with hp laptop using xfinity router/modem

Hi,I have a hp pavilion computer model dv9910us with windows vista hom premium OS. I have an xfinity wireless gateway device modem/router. I have had this at another location and it worked using verizon with a separate modem and router. I also tried it at a xfinity location with a separate modem and router and it worked. I got a separate wireless adapter and installed that and disabled the atheros ar5007 adapter in the device manager. will that atheros 2011 adapter work with this model computer using the windows vista home premium os. If so, could I leave the ar5007 disabled and install the 2011 to make sure it's ok before uninstalling the ar5007. I'm really a novice and just stumbling my way through this. Any help is appreciated.

Hi: You should enable the atheros wireless card, and install this driver. It will have no effect on the other one you are using. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_108905_1&swEnvOid=4059# Then shut down the PC, remove the usb adapter, reboot, and see if you can connect via the atheros card.

Unable to connect to internet with iPod Touch

Hello,
I received an iPod Touch for Christmas but cannot connect to my wireless network at home. I have spent a lot of time talking to Apple Techs and they tell me that I need to update the firmware of my router. My router is an Actiontec MI424WR. When I attempt to connect, the iPod says it "connects" to my SSID but when I launch the browser, it says "cannot open page because the server stopped responding." The IP adddress on the iPod starts with "169" but Apple says it should be "192." Apple says the router needs to be updated with newer firmware. Can anyone direct me as to how I can update the firmware for this router? Any help would be greatly appreciated. Thank you.

I have the same router that you have. In my house we have a 1st gen and a 2nd gen iPod Touch as well as a 1st gen iPhone and 2 2nd gen iPhones that all connect to the Verizon router. I did have to redo the settings on the 2nd gen iTouch several times before it would work. I do not know if I was fat fingering the WEP or what but once it started woking on xmas morning it has been fine since.
Just go thru and triple check your WEP key and make sure that you are entering it in correctly and you should be fine.

Unable to connect to internet with ipod 4G

I am using my home wi-fi and get as far as the password, then after a few secs it tells me that it cannot connect and the only option is then to 'dismiss'?

- Does the iPod connect to other networks?
Try:
-- Reseting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-- Powering off and then back on your router
-- Resetting network settings: Settings>General>Reset>Rest Network Settings
-- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Airport express cant connect to internet through linksys wrt54g router

Hi, i need some help.
I have an airport express that i cant seem to get to connect to the internet.
I have a cable modem to linksys wrt54g wireless router. An xp computer connected by LAN to the router.
An Imac wirelessly.
An xp laptop wirelessly.
And a printer via the LAN
All work just fine.
But when i configured the aiport express to be a wds for the linksys to increase the range for my laptop or imac for that matter. It displays a green light, but has no connection, because it doesnt give the laptop or the imac a correct ip adress, that is what i seem to think the problem is.
Please can someone help, i'm desperate.
Thanks
Core duo 17" IMAC Mac OS X (10.4.7)

Did you follow instructions like this to add the AE to your Linksys network?
http://www.macosxhints.com/article.php?story=20060609053254368&query=linksys%2Bw rt54g
Also, make sure that "Distribute IP addresses" is NOT checked.

Problem connecting to internet with WRT54GL wireless router.

Hey fellas. I currently have a cable modem and a Linksys WRT54GL router with DD-WRT flashed connected to two computers. My desktop is wired to it, and I have a Windows XP and Mac OS X partition on my Macbook Pro, which uses the wireless connection. My PC is working fine, and the OS X partition on my Macbook Pro is running fine, but the XP partition is not doing too hot. Thing is, I have a connection to the router with an excellent signal strength, but Im getting BARELY any packets sent/received, if any. My settings are set to be assigned from the DHCP, but I can't seem to ping the assigned IP. I type ipconfig /all and everything seems to be in order - nothing abnormal to speak of, but I'm getting nothing For the record, I'm using WPA2 security. I'd really appreciate any help you guys can offer. I'm pretty tech-savvy so don't be afraid to use some more technical terms with me. Thanks in advance!

I think I should add that the windows partition does not seem to work when connecting to any other network, as well.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

CS5.5 Subscription: Unable to connect to internet.

So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
When attempting to open any of the products, I get this message:
When I click Try Again, I get this one, which stays on this screen and never changes:
As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
Specs:
MacBook Pro 15" / Snow Leopard
Mac Mini / Lion
To reiterate, here are the steps I've attempted:
Repair permissions
Repair disk
Multiple restarts
Move from Wired to Wireless connection
Move from Wireless to MiFi connection
This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
This time around I noticed many other weird things.
Adobe updater disappeared from my mac.
Encoder refused to encode certain premeire sequences.
Premiere froze on export of those same sequences.
And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
I don't know if this helps but your problem seemed similar to mine.
15" Macbook pro 2.66 GHz Intel Core i7
NVidia GeForce GT 330M
OSX 10.6.8Snow Leopard
4GB DDR3 Ram

HT4623 iphone 5 unable to connect to internet

iphne 5 unable to connect to internet

I had the same issue and usually a reset of all the network settings on iphone did the trick.
this method did not work with my iphone 5 . i did something in router settings that seemed to change things a lot, for the better.
the wifi channel usually the routers use is channel 11, so i changed mine to channel 1. this solved my issues and the iphone connected just fine to the network, without restarting the iphone or resetting any settings or switching off and back on the wifi.
i am on 6.1.3 iOS

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

Canny connect to internet with airport express

I was connected to internet with wireless network using airport xpress and D-link DSL-300T cable modemeverything was fine till i did base station fireware update. Now i can only connect wired with usb modem, (my airtunes still works). Airport status is green and states i am connected to internet via ethernet _though safria is unable to find server. Have tried loads of things but to no success. Tried network assist but network password invalid? though it is correct! Also done hard reset on xpress no joy.
Any mac guru s fancy a challenge!?
Pls.

Likely your ISP uses the PPPoE protocol to connect to clients - and PPPoE doesn't work properly with firmware version 6.2 for the Airport Express.
Downgrade the firmware on your Airport Express back to version 6.1.1 with this software:
http://www.apple.com/support/downloads/airportexpressfirmware611formacosx.html

Unable to connect to internet with my WRT54G router

Similar Messages

Maybe you are looking for