Unable to connect to LAN - Integrated 10/100BASE-T Ethernet LAN (RJ-45 connector)

Unable to connect to LAN, downgraded laptop from Windows 8 to Windows 7 64-bit. Have tried using the HP device identifier, and installing all drivers under Network for the laptop on WIndows 7, though none of them showed as being for Local Area Network.I also tried following this thread: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Integrated-10-100BASE-T-Ethernet-LAN-RJ-45-connector/td-p/4040756Downloaded the suggested drivers there for the HP Envy 17t-j100I also tested downloading the drivers here for Windows 7: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false Neither worked, I am still only able to connect via Wi-Fi, but not via LAN with actual cable attached.In case necessary, hardware ID for the Realtek PCIe FE Family Controller:
PCI\VEN_10EC&DEV_8136&SUBSYS_1854103C&REV_05PCI\VEN_10EC&DEV_8136&SUBSYS_1854103CPCI\VEN_10EC&DEV_8136&CC_020000PCI\VEN_10EC&DEV_8136&CC_0200

Hi: You can use all of the W7 x64 drivers and software from the HP 2000t-2a00 on your model except the BIOS and firmware files. Make sure you install the Intel chipset installation utility first and reboot before trying to install the Realtek LAN driver. http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-2000-2a00-notebook-pc-series/5259212/model/5275371

Similar Messages

  • Unable to connect to Persona integrated in Portal

    Hi,
    We get attached error when accessing persona on th SAP Portal. It was working fine earlier.
    Can somebody help in fixing this issue
    Thanks
    Sushma

    Hi Chen,
    The problem the you are facing mostly occurs due to incorrect assignment of roles. The user id that is used in the EP needs to be present in the CRM backend system as well. The CRM Backend user has to be assigned to the corresponding single role.
    Portal user needs to be assigned to a Portal Role.
    Kindly have a look at the following document which will give more
    information on the role configuration.
    Please find the related documentation under:
    -> http://service.sap.com/crm-inst
    -> People-Centric CRM Inst. a. Config. Guides (on the left side tree)
    Kindly have a look at the guide for CRM 5.0
    This will give a clear picture on how to set up follow ups. Hope this helps. Please let us know incase you need more information on the same.
    Regards,
    Hemanth

  • Driver for my Integrated 10/100 BASE-T Ethernet LAN

     need drivers for integrated 10/100base-t ethernet lan driver win8 x 64bit i have the
    HP 15-d103tx Notebook PC
      here  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en...
     please help

    The Integrated 10/100 BASE-T Ethernet LAN is not the wireless network adapter.
    That is the wireless network adapter and has nothing to do with the wireless.
    If you need a driver for the wireless network adapter, then please do this...
    Go to the device manager and click on the Network Controller needing drivers.
    Then click on the Details tab at the top of the network controller window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters that begin with PCI\VEN.

  • We are unable to connect to Integration builder through VPN.

    Hi,
    We are unable to connect to Integration builder through VPN.
    Below are the errors we get:
    a. In two of the PI 7.0 Systems  we get:
         i. Cannot open connection on host x and port y.
         ii.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x and port:y
         iii. java.net.SocketException: Malformed reply from SOCKS server
    b. In the other two PI 7.1 systems we get:
         i. MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
         ii. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port:y]
         iii. com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances:
    uvw.xyz.abc.net:51504 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: x and port: y
    The hosts and ports are accessible. (Telnets and tracerts work fine for all the systems)
    We are able to access the SLD and Runtime workbench on all the environments. However, Integration Builder tools are not accessible.
    Any clue on what the problem might be?
    Thank you,
    Siva.

    Hi Siva,
    When you execute SXMB_IFR from PI, do you get  Integration Builder page?
    Are you trying to directly access the PI server by the known URLs?
    Also, Following links may be of your use:
    Integration Builder -Configuration is not openning?
    Re: unable to logon to Enterprise Services Builder or Integration Builder
    Regards,
    Nipun

  • Unable to Connect to the Web Logic Integration Studio

    Hi All
    I have installed installed WIntegration Server and using
    quickstart click the Take to Platform tour I started all the servers
    Note-- I have not installed separate weblogic server 7.0 and not started.
    whenever I click started WebLogic Integration Studio and it shows
    user --admin
    password- security
    url--t3://localhost:7001
    once submit it shows always Unable to connect to the server
    please help me ???????????????????????????????????????????/
    Server is running fine I used quickstart--- Take the live platform tour to run
    the below servers.
    C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
    ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
    C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
    Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
    Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
    e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
    logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
    urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
    Starting WebLogic Server...
    <Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
    on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
    <Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
    was found on server e2eServer for realm CompatibilityRealm.>
    <Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
    using realm CompatibilityRealm.>
    <Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
    ic Admin Server "e2eServer" for domain "e2eDomain">
    <Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
    Integration - B2Bi Server started successfully.>
    INFO: WebLogic Integration - B2Bi Server started successfully.
    <Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
    n - AI Server version 7.0.4.0>
    <Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
    on - BPM Server version 7.0.4.0>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    After the server has booted, your browser should
    automatically launch and point to the WebLogic Server
    Index running on this server. If your browser
    fails to launch, point your browser to the URL
    "http://Inforicadb:7501/index.jsp
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    =============== Initializing Logger ======================
    <Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
    not started for production server.>
    <Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
    enThread.Default" listening on port 7502>
    <Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
    hread.Default" listening on port 7501>
    <Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
    c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
    <Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
    ch
    anged to RUNNING>
    <Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
    in RUNNING mode>
    please help me, urgent
    Thanks in advance
    with regards
    bala

    when you go through your carrier provider, there is an additional step in the SSL tunnel. Not sure how this transcribes, but it is possible that your carrier does not use the same port as the one you want it to use.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Firefox is unable to connect to websites when im using LAN connection

    i cant browse any website with firefox when im using my hostel LAN connection.. my wifi works but only LAN is unable to connect.. the LAN works fine since im connected to the internet and im able to use other web browser such as LAN was firefox

    i cant browse any website with firefox when im using my hostel LAN connection.. my wifi works but only LAN is unable to connect.. the LAN works fine since im connected to the internet and im able to use other web browser such as LAN was firefox

  • ADF / OBIEE Integration : Unable to connect to the BI Presentation Server

    Hi,
    Using JDeveloper 11.1.1.6, I have created one ADF application to test its integration with OBIEE 11.1.1.6. The application contains jsf page which holds OBIEE dashboard. At OBIEE side, I have created Impersonate user. When I run this application on Integrated Weblogic Server, it shows OBIEE dashboard perfectly. But when I deploy the application on OBIEE weblogic server, it is deployed successfully but shows following error when we try to access application through URL.
    Unable to connect to the BI Presentation Server. Please ensure that it is running, configured properly, and that the connection details within this application are correct.Please check the log file for more details.
    The connection (http) is working fine when we check it inside application. Can you please help how to resolve this issue?

    Hi,
    I can see 2 errors and 1 trace message in EM for that deployed application.
    Error 1
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.soap.connection.BISoapConnectionFactory
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Cannot lookup the connection,Obiee using fallbacks
    Supplemental Detail javax.naming.NameNotFoundException; remaining name 'Obiee'
    at oracle.adf.share.jndi.ContextImpl.findObject(ContextImpl.java:647)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:144)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:149)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionFallback(BISoapConnectionFactory.java:522)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionImpl(BISoapConnectionFactory.java:296)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionAndAddIfNecessary(BISoapConnectionFactory.java:580)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory.getConnection(BISoapConnectionFactory.java:163)
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:318)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Error 2
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Supplemental Detail oracle.bi.presentation.soap.connection.BISoapException: Please check the log file for more details.
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:323)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Trace Message
    Message Level 16
    SRC_CLASS oracle.bi.presentation.runtime.binding.BIRegionBinding
    SRC_METHOD _updateOrCreateSessionStylesheet
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Unable to get the Session Attribute. oracle.bi.presentation.runtime.styles.biStylesheet
    I hope this may help to identify the root cause and solution.

  • Unable to connect to SAP Through LAN

    I have installed a new BIW server but i am unable to connect to that sap server thru LAN.
    Let me give the IP range of the servers
    DEV - 90.0.0.*
    PRD - 90.0.0.*
    BIW DEV - 90.0.0.* (New BIW server which i am unable to connect)
    i am able to connect to DEV and PRD from BIW DEV server. but not vice versa
    I tried to ping the BIW IP Address from router machine and i am able to ping.
    We have a Router machine. I don't know if i have to add any entry in routtab. I already have p*** in routtab.
    Also i am unable to connect to biw dev using router string from external network but able to connect to DEV and PRD.
    It will be great if anyone give suggesion to resolve this Issue.
    Regards
    Prakash

    Thanks for your reply!!
    According to the instructions mention in the link, i ran the test everything was fine..
    i ran the self test and i got self test OK.
    In the biw server Host file i mentioned the IP address and host name of the biw server and DEV and PRD.
    Still unable to connect to BIW Server thru LAN.
    when i tried saprouter -r command in the router machine, it gives this error
    "routab cannot open './saproutab': EXIT PROGRAM!!!
    <running without saproutab is no longer supported for security reasons>
    Could not open permission table"
    Please guide me what else can be done.
    Thanks
    Regards
    Prakash
    Edited by: Praxbasis on Aug 12, 2009 7:19 PM

  • Unable to connect facebook using HTTP_CONNECTOR in Integrator. Can anybody help for connecting Facebook with Integrator.??

    Hi,
    I am unable to connect facebook using HTTP_CONNECTOR component i have added all the parameters required for its authentication i.e client_id , client_secret, grant_type correct but the graph is giving the following error:
    ====================================================================================================================
    ERROR [WatchDog_0] - Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
    peer not authenticated
    ERROR [WatchDog_0] - Error details:
    org.jetel.exception.JetelRuntimeException: Component [Query for access token:QUERY_FOR_ACCESS_TOKEN] finished with status ERROR.
      at org.jetel.graph.Node.createNodeException(Node.java:535)
      at org.jetel.graph.Node.run(Node.java:514)
      at java.lang.Thread.run(Thread.java:722)
    Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
      at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397)
      at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
      at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:572)
      at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
      at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
      at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
      at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:641)
      at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:480)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
      at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:784)
      at org.jetel.component.HttpConnector.buildAndSendRequest(HttpConnector.java:1836)
      at org.jetel.component.HttpConnector.process(HttpConnector.java:1803)
      at org.jetel.component.HttpConnector.executeForRecord(HttpConnector.java:1947)
      at org.jetel.component.HttpConnector.execute(HttpConnector.java:1914)
      at org.jetel.graph.Node.run(Node.java:485)
      ... 1 more
    ============================================================================================================
    Can anybody help with this ??

    Hi Brett,
    I have installed endeca in non-ssl mode. I am trying to validate the HTTP_Connector component as shown below and its showing the following error:  
    and if run the graph its showing error as mention above. I am new to endeca so can you please help me that what can i do for validating this component and connecting to facebook.

  • Sharepoint Integrated SQL Reporting - Unable to connect to the server that is specified......

    This is driving me crazy.  I have Reporting services implemented on several sites in Sharepoint.  For some reason just one site refuses to work.  I see all the features are there.  I can create data sources. 
    When I try to create a report I get :
    "Unable to connect to the server that is specified in the URL,
    http://help.site.  Make sure that the server is running, the URL is correct, and you have permission to use the server"
    I'm using my domain admin account, I know know this works on every other site.  I know I haven't forgotten the general setup of the service. 
    The only difference is this site allows "anonymous" connections.  Has anyone heard of an issue about using anon and reporting services?  Either way I authenticate before I login but that doesn't have an effect.
    David Jenkins

    Thank you forums!!!!
    I found an existing thread. 
    http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/d815b9fb-3431-490d-bd51-e7e21fcb788e
    1) Opened up IIS
    2) Expanded my intranet folder
    3) Expanded _vti_bin
    4) Highlighted "ReportServer"
    5) Double Clicked on Authentication
    6) Disabled "Anonymous Access" to the reporting folder itself
    7) Opened report builder 3.0 and typed in http://intranet.company.com" BOOM instant connection :D
    David Jenkins

  • Integration Repository/ Directory Problem - Unable to connect to server

    Unable to connect to server xxxxx:50xxx. Check server availability.
    #8 08:40:44 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
    Thrown:
    MESSAGE ID: com.sap.aii.ib.core.ejbutil.rb_all.SERVER_NOT_AVAILABLE
    com.sap.aii.utilxi.misc.api.ReconnectRuntimeException: Unable to connect to server alixidv2:50104. Check server availability
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:141)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:315)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:217)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:173)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:167)
         at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Root cause:
    com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.79.64 and port: 50104
    java.net.SocketException: Malformed reply from SOCKS server
         at java.net.SocksSocketImpl.readSocksReply(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at com.sap.engine.services.rmi_p4.ConnectionManager.getSocket(ConnectionManager.java:325)
         at com.sap.engine.services.rmi_p4.ConnectionManager.getConnection(ConnectionManager.java:215)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:149)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:114)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:110)
         at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:60)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.logonWithoutTicket(EJBHomeFactory.java:816)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:388)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:126)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:315)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:217)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:173)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:167)
         at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    #7 08:40:44 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.misc.api.ReconnectRuntimeException: com.sap.aii.utilxi.misc.api.ReconnectRuntimeException:
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:141)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:315)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:217)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:173)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:167)
         at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    #6 08:40:44 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.misc.api.ReconnectRuntimeException:
    #5 08:40:44 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.engine.services.rmi_p4.P4IOException: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.79.64 and port: 50104
    java.net.SocketException: Malformed reply from SOCKS server
         at java.net.SocksSocketImpl.readSocksReply(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at com.sap.engine.services.rmi_p4.ConnectionManager.getSocket(ConnectionManager.java:325)
         at com.sap.engine.services.rmi_p4.ConnectionManager.getConnection(ConnectionManager.java:215)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:149)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:114)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitialReference(P4ObjectBrokerClientImpl.java:110)
         at com.sap.engine.services.security.remote.login.RemoteLoginContext.<init>(RemoteLoginContext.java:60)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.logonWithoutTicket(EJBHomeFactory.java:816)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:388)
         at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:126)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:315)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:217)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:173)
         at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:167)
         at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    #4 08:40:44 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.79.64 and port: 50104
    #3 08:38:43 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
         at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
         at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
         at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
         at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
         at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
         at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
         at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
         at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:151)
         at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    #2 08:38:43 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
    #1 08:38:43 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
         at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
         at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
         at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
         at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
         at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
         at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:147)
         at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:108)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
         at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
         at java.awt.event.InvocationEvent.dispatch(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    #0 08:38:43 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information

    HI,
       there could be a few reasons for this.
    First thing to try is accessing the Repository or Directory directly,
      .e.g.,
        http:<host name>:<JEE port>/dir/start/directory.jnlp
    or
        http:<IP Address>:<JEE port>/dir/start/directory.jnlp
    If the first one works then check the exchangeProfile for incorrect hostname and port entries.
    If using the hostname does not work but the IP address does then check the etc/hosts file.
    If this problem occurred after a SP update then try restarting  the Java Engine.
    If it is a PI 7.1 system with a local SLD then refer to the note -
    [No automatic PI 7.10 SLD Registration|http://service.sap.com/sap/support/notes/1334053]
    Regards
      Kenny

  • Unable to connect to my E51 using PCsuite 7.1.18.0

    Have been using E51 phone with older PCsuite version for the past few months with no problem (BT connection)
    After upgrade to PCsuite 7.1.18.0 began unable to connect to phone.
    Downgrade back to older version of PCsuite but problem still remains.
    Try to unpair phone but prompt 'Unable to unpair phone'.
    Try to Rename phone id name and do a 'Search for more phone' but no new devices have been found and it looks like the search is only last for 1 sec only instead of doing a longer search.
    Try to uninstall what ever BT stack in my device manager and reinstall but no success.
    Would be hoping and praying for some advice on this matter.
    PC: HP Pavlion Notebook.
    Device manager:
       Under Bluetooth devices:  Bluetooth Bus Emulator (WIDCOMM 4.0.1.2601)
                                             HP integrated module with BT wireless tech (WIDCOMM 4.0.1.2601)
       Under  Network Adaptor: Bluetooth LAN access Driver (WIDCOMM 4.0.1.2601)
     I try to search for Microsoft Bluetooth drivers but i can't find any link to d/l.
    Thanks

    Hi kidoman
    When you say you downgraded PC Suite to earlier version, did you use PC Suite Cleaner from here as notorious for leaving corrupt registry entries behind?http://europe.nokia.com/A41198596
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Unable to connect to the 2014 SQL Developer's Edition Report Server

    Hello,
       I have been through the wringer trying to gain access to my report service.  I have to admit that I am something of a neophyte with regards to SQL Server but I am pretty good with Windows 7 management in general.  I have just installed
    SQL 2014 Developer's Edition under Windows 7 SP1.  I have connected to the database engine server and loaded a couple of databases.  I chose windows authentication and can get into the report configuration manager and the SQL server configuration
    manager with no problems.  I have registered the URLs for both the web and report manager.  I can connect to all of the other instances (database engine, analysis services, and integration services).  I have to run with administrator privileges
    to connect to the integration services but it does not make any difference when attempting to connect to the reporting service either through report builder 3 or connect through object explorer.  I can find no relevant errors in the RS log even after
    enabling logging.  I have been through many of the articles I could find online but nothing seems to resolve the problem.  When connecting it shows Windows Authentication and the correct domain\user.  I also browse to find the service so the
    URL should be correct. The error that I am getting is as follows:
    "Unable to connect to the server at CALYSTO\ReportService. The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that
    the report server runs SQL Server 2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)"
    Program Location:
       at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection()
       at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.GetRSConnectionObject(Boolean ensureOpenConnection)
       at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.ProceedWithConnection(UIConnectionInfo ci)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.Microsoft.SqlServer.Management.UI.ConnectionDlg.IServerType.ProceedWithConnection(UIConnectionInfo ci)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    I have tried fixing the installation with the installation disk, removing the report service instance and reinstalling it, using the administrator account instead of mine (with is of course an administrator).  I'm at a loss right now.  I have spent
    about 12 hours trying to track this down and so far nothing has worked.  I'm about ready to reinstall the entire operating system and start all over.  I thought that I would try this venue before going to that extreme.
    Any thoughts, questions, or ideas would be much appreciated.
    Thanks,
    -Tom
    Tom L

    "Unable to connect to the server at CALYSTO\ReportService.
    Hello Tom,
    It should be "ReportServer" in the URL, not "ReportService".
    In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
    go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Error calling report FRM-41213 unable to connect to Report Server

    Hi,
    I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
    I installed it in both Windows 2000 SP4 and Windows XP SP2.
    I would like to call a Report using a button inside Oracle Form.
    I create my own Report Server, using : rwserver server=repsrv
    A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
    In Form (inside a button -> WHEN-BUTTON-PRESSED) :
    1. Using RUN_REPORT_OBJECT()
       rep_id := find_report_object('REPORT10');
         if not id_null(rep_id) then
           v_rep := run_report_object(rep_id);
         else
              message('Null');
       end if;
       a. If I did not specify the name of the Report Server in Reports node of Form's property object
    (I leave it blank)
    The following error appear :
    FRM-41211: Integration error, SSL failure running another product
    b. If I specify the name of the Report Server : repsrv
    The following error appear :
    FRM-41213: Unable to connect to Reports Server repsrv
    2. Using WEB.SHOW_DOCUMENT()
    a. If did not I specify the server name in the parameter
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    b. If I specify the server name in the parameter --> server='repsrv'
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server repsrv failed
    In Report :
    If I try to navigate manually to :
    1. http://localhost:8889/reports/rwservlet using web browser.
    It showed OracleAS Report Services - Servlet Command Help page.
    2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    3. Finally,
    http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server repsrv failed
    4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
    If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
    If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
    5. I have tried to use rwrun in command line.
    rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
    The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
    Question :
    1. What supposed to be done?
    The Report server is ready, but the web browser seems unable to connect to Report Server.
    2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
    Any help would be grateful.
    Many thanks,
    Buntoro

    Hi,
    Problem solved.
    I got the solution from another post.
    Re: REP-51002: Bind to Reports Server rep failed
    Here are the step I did.
    Note : Please make backup for the following file : rwnetwork.conf
    - In file rwnetwork.conf, remove or commented the following
    <multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
    - And then uncommented
    <namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
    - replace the
    %NAMING_HOST% with your computer name or specify an IP address
    %NAMING_PORT% with 14021
    It should look like this :
    <namingService name="Cos" host="blahblah" port="14021"/>
    - I did not change the : name="Cos", since I do not understand what does it for
    - Save you changes.
    - Start the OC4J.
    - Find the location of : namingservice.bat (on Windows platform)
    - execute in the command line : namingservice.bat 14021
    - finally start the report in the web browser
    Note:
    To shutdown the namingservice, use : namingservice.bat 14021 shutdown
    Regards.
    Buntoro

  • BIA 7.9.6.1 Unable to connect to Informatica services from DAC

    Hi All,
    As a learning exercise, I have installed the following on a single Windows XP machine (Am aware that Windows XP is not supported for Informatica Service install - but currently have access to only this machine)
    - OBIA 7.9.6.1
    - Informatica 8.6.1 client & services with hotfix 6
    - DAC client & server
    I have created the Repository and Integration services in Informatica PowerCenter and are running in normal mode
    I have configured the DAC as per installation document. I am now trying to configure the DAC Integration Settings for informatica.
    I am unable to register an Integration service or a repository service and get the following errors,
    On testing the Integration Service registration
    Failure connecting to "INFORMATICA_DW_SERVER"!
    And in the log file I find
    SEVERE Thu Nov 12 11:43:54 WST 2009
    ANOMALY INFO::: Error while pinging informatica server using command pmcmd pingservice -sv int_service -d Domain_ASG596138
    MESSAGE:::log\ping.log (The system cannot find the file specified)
    EXCEPTION CLASS::: java.io.FileNotFoundException
    java.io.FileInputStream.open(Native Method)
    java.io.FileInputStream.<init>(FileInputStream.java:106)
    java.io.FileInputStream.<init>(FileInputStream.java:66)
    com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testServer(StaticDatabaseCalls.java:917)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:887)
    com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
    On testing the Repository Service registration
    Failure connecting to "INFORMATICA_REP_SERVER"!
    ANOMALY INFO::: Error while pinging informatica repository server
    MESSAGE:::C:\orahome\10gR3_2\bifoundation\dac\log\pmrepConnect.log (The system cannot find the file specified)
    EXCEPTION CLASS::: java.io.FileNotFoundException
    java.io.FileInputStream.open(Native Method)
    java.io.FileInputStream.<init>(FileInputStream.java:106)
    java.io.FileInputStream.<init>(FileInputStream.java:66)
    com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
    com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:100)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
    com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
    Could anyone please suggest what could be the cause of these errors. Any pointers to how to debug this will also be great. Please note I am totally new to Informatica and OBIA.
    Many Thanks,
    Kiran

    HI All,
    I fixed the first part of the issue. Now I am able to connect top the Integration Service. I created system environment variable INFA_DOMAINS_FILE and included the BIN path in PATH variable.
    However unable to connect to the Informatica Repository service. I am getting the follwoing error
    Failure connecting to "INFORMATICA_REP_SERVER"!
    ANOMALY INFO::: Error while connecting to informatica repository server
    MESSAGE:::
    pmrep Connect Error
    =====================================
    STD OUTPUT
    =====================================
    Informatica(r) PMREP, version [8.6.1], build [183.1218], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2008
    All Rights Reserved.
    This Software may be protected by U.S. Patent Numbers 6,208,990; 6,044,374; 6,014,670; 6,032,158; 5,794,246; 6,339,775; 6,850,947; 6,895,471; 7,254,590 and other U.S. Patents Pending.
    Invoked at Thu Nov 12 12:59:16 2009
    [11/12/2009 12:59:25-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
    [11/12/2009 13:00:26-[REP_55115] Still trying to connect to the Repository Service [repo_service]. The remaining resilience time is 110 seconds.]
    [11/12/2009 13:00:35-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
    [11/12/2009 13:01:37-[REP_55115] Still trying to connect to the Repository Service [repo_service]. The remaining resilience time is 39 seconds.]
    [11/12/2009 13:01:46-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
    [11/12/2009 13:02:21-[REP_55112] Unable to connect to the Repository Service [repo_service] since the resilience time is up.]
    [Failed to connect to repository service [repo_service].]
    An error occurred while accessing the repository[Failed to connect to repository service [repo_service].]
    [11/12/2009 13:02:21-[REP_55102] Failed to connect to repository service [repo_service].]
    Repository connection failed.
    Failed to execute connect.
    Completed at Thu Nov 12 13:02:21 2009
    =====================================
    ERROR OUTPUT
    =====================================
    EXCEPTION CLASS::: com.siebel.analytics.etl.infa.interaction.PmrepConnectException
    com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:102)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
    com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
    com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
    com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
    Please help.
    Thanks,
    Kiran

Maybe you are looking for

  • Assigning User to a Group.

    Hi All, We have installed EP 7.0. We need to add the user "xxx" to the group "SAP_HR_LSO_DEVELOPMANAGER". We searched for the user "xxx" and click on modify button to edit the Assigned groups. But the Add button is disabled for the Admin. How to enab

  • Free/purchase button doesn't appear in app store

    there is no free or purchase button in the app store. also cannot purchase anything in itunes (no button). signed in with apple/itunes. also the apps can't be moved or deleted. when you hold the app down, it doesn't shake.

  • 16.0.2 not loading properly due to AVG script error

    I updated to 16.0.2 about half an hour ago (had no internet access for 3 weeks hence late updating of Firefox) and found I keep getting a script error: "a script error on this page is busy.. Chrome://avg/content/js:532"). I assume this refers to the

  • Diagnostics won't run following the instructions of holding down D at start-up? any ideas

    I am having problems with my display and want to run diagnostics - the apple site says to hold down D when restarting and I have tried 3 times but won't go there... Any ideas? Thanks

  • Why are there two versions of flash player on my laptop?

    I'm running 64 bit Windows 7 Professional which seems to handle both 32 and 64 bit software.  I use Firefox as my default browser and use MSIE only when I must.  A Flash update failed so I checked the uninstall programs list thinking I'll just uninst