Unable to connect to LMS web interface
Hello. Disappeared access to the web interface. Here is what the system:
#pdshow Apache
Process= Apache
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 11/27/13 12:52:34
Stop = 11/27/13 12:52:34
Core = Not applicable
Info = Application started by administrator request.
What could be the problem? Thanks in advance.
Hello.
Yes, this is a new installation.
Cisco_Prime_install_20120209_113107.log http://pastebin.com/rgNEhyd3
regdaemon.xml http://pastebin.com/tCeYzMZi
regdaemon.xml.bak http://pastebin.com/y7gnCsvE
stdout.log http://pastebin.com/7mNamb2b
stdout.log-OLD-1 http://pastebin.com/wxv8NiP1
stdout.log-OLD-2 http://pastebin.com/1WqbTQRf
http://pastebin.com/1WqbTQRfstdout.log-OLD-3 http://pastebin.com/2frfWs0Z
Syslog_info - file weighs 373 MB. Pour it on file sharing?
Similar Messages
-
ASA 5505 configured for WebVPN connecting to Citrix Web Interface
ASA 5505 configured for WebVPN connecting to Citrix Web Interface.
i have a ASA 5505 that I am attempting to configure for WebVPN with passthrough into Web Interface . The user authenticates into WebVPN OK and gets the option to click on the Citrix Link (which is i add bookmark citrix server http:// 172.30.40.5.) i enter the citrix and then for example i want to open to outlook it can not open. (when i want to open some application no application is open)).there is no alarm at asa. how i solve this issue?
thanks.Teymur,
Can you confim that after disabling the ssl/tls on the Citrix server (secure connectivity) that you are getting exactly the same error. It is possible that it is generating a different error.
The bug where we have see the existing error was CSCtf06303 but that has been fixed in 8.4.1. Can you confirm the exact version of code you are running on the ASA.
If you have confirmed the above two notes it may be adventageous to open a TAC case as we may need to do some live additional troubleshooting.
Thanks
-Jay -
My C670 ESA's have been throwing these alerts intermittently for the past few days, anyone else seeing them?
The Warning message is:
Unable to connect to Cisco Web Security Service.
URL Filtering will not work correctly.
Please verify all network, proxy and firewall settings.
Connection to "v2.sds.cisco.com" failed.
The last error seen on this connection: "Request failed with code: 28 (Connection time-out)"
Version: 8.5.6-092
Looks like it is open on port 443 and currently up. Hitting it with a browser gives me:
https://v2.sds.cisco.com/
After an error or two they go away and appear OK.
Checking the logs I don't see a way to verify URL lookups are working, is there a way?
Also, I setup URL filtering six months ago and had it set to only trigger on (-10)-(-9.5) and saw about an 80% false positive. It has improved over the past six months drastically but still catching mostly advertising URLs and allowing all phishing URLs right through. I've yet to see it block a phishing URL.
JasonAfter lots of trial and error, I was able to eliminate this problem. What I wound up doing is defining the XE service again in the listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server)
I know that typically you should not have to do this, especially since I already had defined DEFAULT_SERIVCE_LISTENER = (XE) at the bottom of the listener.ora file. Explicitly defining the XE service in the listener.ora file allows the listener to find it while the system is running under the Cisco AnyConnect VPN. The only hiccup I found by doing this is that the XE service is discovered twice by the listener when the system is NOT running under the Cisco AnyConnect VPN. It still works OK. The listener just seems to ignore the repeated definition of the XE service (see output below):
C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server\bin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-JUN-2013 10:03:15
.......(omitted output).......
Service "XE" has 2 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: DEV-M-137GF, pid: 5544>
(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=58257))
The command completed successfully
If anyone has a cleaner solution for this problem, please let me know. Otherwise, I am moving forward with what I did.
Thanks.....Paul -
I am unable to connect to the web on my desktop with Firefox 8, the program displays but will not connect to the Internet, Other browsers Internet Explorer and Opera do connect on the same machine. McAfee is not blocking it, virus checks detect no virus yet yesterday it worked perfectly
I tried what was suggested by starting in Safe Mode but the problem still exists. I am frustrated as I cannot connect to my Verizon Fios page. I can connect to the Internet with the Firefox Browser and can go to any web site except finding my Verizon Home page.
-
How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?
For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html -
Unable to Connect to the Web Logic Integration Studio
Hi All
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
with regards
balawhen you go through your carrier provider, there is an additional step in the SSL tunnel. Not sure how this transcribes, but it is possible that your carrier does not use the same port as the one you want it to use.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Why am I unable to connect to the Web when I'm in a WiFi hotspot?
Although I'll have a strong web signal, I'm often unable to retrieve Mail or use Safari. I was in my hotel lobby yesterday (they advertise free Wi-Fi) and Safari would only show the hotel website. I was unable to use any of my Safari Bookmarks. I recently received the same message at Tokyo's Narita Airport.
I was able to retrieve my .Mac mail messages and use Safari at a WiFi spot at the Seoul Airport. However, on a return flight several days later my Touch would only show the Seoul Airport Webpage. I was unable to retrieve messages or use Safari.In many places that offer free wifi you need to log-in to their web page. This then allows a proxy server to respond to your requests. If you don't log-in to that one web page you can see none of the +iPod touch+ internet applications will be able to get a connection.
mrtotes -
Unable to connect servlet on web server
Hi all,
I have wrote the following program to connect to the servlet to the web server:
public class HTTPTest
public HTTPTest() {
public static void main(String[] args) {
HTTPTest httptest = new HTTPTest();
httptest.sendHTTP();
public void sendHTTP() {
try
URL url = new URL("http://myserver/myServlet");
HttpURLConnection conn = (HttpURLConnection)url.openConnection();
conn.setDoOutput(true);
conn.setRequestMethod("POST");
conn.setRequestProperty("Content-type", "application/x-www-form-urlencoded");
PrintWriter dos = new PrintWriter (conn.getOutputStream ());
dos.println("content=" + URLEncoder.encode("ABC"));
dos.println("signature=" + URLEncoder.encode("CDE"));
dos.flush();
dos.close();
conn.disconnect();
catch(Exception e)
My servlet does contains some code that write log to the web server log. However, when I examine the log after running this program, nothing was written. But when I access my servlet using an HTML page, it works!
I am using iPlanet 4.0 SP4, JDK 1.3. Can anyone tell me why? thanks very much!
WalterThanks very much! It works.
However, another problem comes. For the two fields that I "POST"ed, it seems that one can reach the servlet but one cannot. When I retrieve the values from the servlet using "req.getParameter("XXX")", one of them got null. But obviously my applet does not send null values.
Any other thing is needed? Thanks! -
Unable to connect to mongod web service over LAN
I have mongod running on the standard port 27017. The web service is running on 28017, as I've verified I can access it from localhost. But I'm running the computer headless and would prefer to get it on another box.
Any attempt to connect to port 28017 by either ip or hostname results in a cannot connect error. Other web services running on the same box on non-standard ports are accessible. What am I missing?
Last edited by jbhelfrich (2013-08-11 18:09:59)Thanks very much! It works.
However, another problem comes. For the two fields that I "POST"ed, it seems that one can reach the servlet but one cannot. When I retrieve the values from the servlet using "req.getParameter("XXX")", one of them got null. But obviously my applet does not send null values.
Any other thing is needed? Thanks! -
EA2700 - Unable to Rollback to old Web Interface
Hello,
I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.
All I ever get is this message:
Unexpected Error The firmware update did not complete successfully. Please try again later.
We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.
I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
Solved!
Go to Solution.First of all you can try to do the 30/30/30 Hard Reset. The following procedure will clear out the NVRAM and set Router back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds....
Then to rollback the previous firmware here is the link for the same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=227c9e6286124532ac52a643ca4122a5_Rolling_back_the_... -
Unable to Config WRE54G via Web Interface-Any Thoughts?
I have reset my WRE54G (version 1) to factory defaults, yet I get no response to ping or HTTP on 192.168.1.240. IP config on computer is correct--LEDs on WRE54G not indicating any issue and I can see the default SSID on my site monitor-so it is not totally dead, just brain dead apparently. Tried disabling the WEP on my WRT54G2 and doing "auto config" and that did not seem to help either...
Any thoughts on what I might do to get back to web UI?Try this :
Go to the setup page of the router and unsecured the network and click on save settings...Now,use auto-config feature of WRE.. Check this link. Wait for the Link and Activity lights to go blue on the range expander which will indicate a successful wireless connection between the expander and the wireless router/access point.
Now,on the wireless computer,connect to the unsecured network and try to access the gui for the wre54g by typing 192.168.1.240 in the address bar and secured the network and click save settings...Now,go to the setup page of router and put the same security key and save the settings...Power cycle the entire network and try to connect the secured network on your wireless computer. -
ESB unable to connect to existing Web Service
Use Case: We have an existing webservice which is RPC encoded and that had to be invoked from Oracle ESB.
Version used : oracle soa suite 10.1.3.1.0.
This service had to be deployed in ESB for common platform across the enterprise, where other services can be plugged-in later.
The sample WSDL (for demo purpose) and error message is given below,
Hello,
<definitions
name="RPCJavaObject"
targetNamespace="http://rpcjavaobject/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://rpcjavaobject/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns0="http://rpcjavaobject/types/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns1="http://www.oracle.com/webservices/internal"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.oracle.com/webservices/internal"
elementFormDefault="qualified" xmlns:tns="http://www.oracle.com/webservices/internal"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<complexType name="vector">
<complexContent>
<extension base="tns:list">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<complexContent>
<restriction base="soap11-enc:Array">
<attribute ref="soap11-enc:arrayType" wsdl:arrayType="anyType[]"/>
</restriction>
</complexContent>
</complexType>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://rpcjavaobject/types/"
elementFormDefault="qualified" xmlns:tns="http://rpcjavaobject/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/"/>
</types>
<message name="RPCJavaObject_callMe">
<part name="str" type="xsd:string"/>
</message>
<message name="RPCJavaObject_callMeResponse">
<part name="result" type="tns1:vector"/>
</message>
<portType name="RPCJavaObject">
<operation name="callMe" parameterOrder="str">
<input message="tns:RPCJavaObject_callMe"/>
<output message="tns:RPCJavaObject_callMeResponse"/>
</operation>
</portType>
<binding name="RPCJavaObjectSoapHttp" type="tns:RPCJavaObject">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="callMe">
<soap:operation soapAction="http://rpcjavaobject//callMe"/>
<input>
<soap:body use="encoded" namespace="http://rpcjavaobject/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
parts="str"/>
</input>
<output>
<soap:body use="encoded" namespace="http://rpcjavaobject/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
parts="result"/>
</output>
</operation>
</binding>
<binding name="RPCJavaObjectSoap12Http" type="tns:RPCJavaObject">
<soap12:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="callMe">
<soap12:operation soapAction="http://rpcjavaobject//callMe" soapActionRequired="false"/>
<input>
<soap12:body use="encoded" namespace="http://rpcjavaobject/" encodingStyle="http://www.w3.org/2003/05/soap-encoding"
parts="str"/>
</input>
<output>
<soap12:body use="encoded" namespace="http://rpcjavaobject/" encodingStyle="http://www.w3.org/2003/05/soap-encoding"
parts="result"/>
</output>
</operation>
</binding>
<service name="RPCJavaObject">
<port name="RPCJavaObjectSoapHttpPort" binding="tns:RPCJavaObjectSoapHttp">
<soap:address location="http://localhost:8888/Application1-RPCJavaobject-context-root/RPCJavaObjectSoapHttpPort"/>
</port>
<port name="RPCJavaObjectSoap12HttpPort" binding="tns:RPCJavaObjectSoap12Http">
<soap12:address location="http://localhost:8888/Application1-RPCJavaobject-context-root/RPCJavaObjectSoap12HttpPort"/>
</port>
</service>
</definitions>
Error : when try to configure as SOAP Service from ESB is "The selected porttype is using a message that is invalid for ESB bcause it is multi-part or has a simple type.
Options we think are
1) Convert the RPC encoded to Document wrapped. If this option has to be followed, what are all the factors taken to be account ?
2) Try to design the existing functionality using adapter and connect to it. (don't know whether this is possible as the deadlines are bit tight).
Thanks,
Nagarajan K.Thanks very much! It works.
However, another problem comes. For the two fields that I "POST"ed, it seems that one can reach the servlet but one cannot. When I retrieve the values from the servlet using "req.getParameter("XXX")", one of them got null. But obviously my applet does not send null values.
Any other thing is needed? Thanks! -
Unable to connect to SAP WEB AS
Hi all,
Even though I specified correct J2EE Engine settings in the windows>Preferences>SAP J2EE Engine settings. The remote sever is not connecting..
Regards ,
PRADEEPhi Pradeep ,
This is happening because of the firewall settings of your box disable it and everything will work also check the firewall settings of the remote J2EE.
Unfortunately people dont read the problem before replying
otherwise the problem was quite evident and the answer would have been prompter
Regards
Amit
Message was edited by:
Amit Kesari -
Can't Connect to Web Interface
I have a Valet M10 and I'm trying to connect to the web interace to set up port forwarding. I've tried typing in the 192.168.1.1 address into 2 different browsers but it won't connect. Furthermore when I try and install the Cisco Connect software it gives me an error and won't finish the installation. My wireless works fine but I can't seem to connect to the web interface no matter what I do. Any ideas?
Well the scenario that you explained in that case you can try the following steps:
If you want to make use of the Cisco Connect Software then in that case you need to uninstall the existing Cisco Connect Software Reset the Router, power cycle the whole network and Reinstall the Cisco Connect Software... Then update the firmware of the Router which can be downloaded from the Cisco Website ( homesupport.cisco.com )....
If you want to do it manually then reset the router, power cycle the whole network then check the default gateway address and then try to open the Router setup page..As well as update the firmware of the Router which can be downloaded from the Cisco Website ( homesupport.cisco.com ).... -
Planning Web Unable to connect
Hi,I am unable to connect via planning web. I have tried all username passwords that I used but nothing works.Is there a default/username password to connect to planning via web.Appreciate your responseThanks
The issue has been resolved. Apart from the missing PAG file issue, the admin password was also changed. So when I restored the old password and the backup files, everything started working.
However, can anyone explain why I cant change the admin password. This was the password used at the time of installation. Are we stuck with this password. I am sure there must be a way to change it. Can anyone reflect on this issue?
Secondly, when we change the admin password from shared services, is it necessary to go to planning --> administration --> manage data source and enter the new password for essbase connection ?
Maybe you are looking for
-
Adding participants to the conference by dilout
Hi everyone, We have a problem with Lync 2013 conferences. When we try to add a participant by calling him to the phone number - we receive error that "Phone number can not be reached". If try to add the same number few times - it will dial normally.
-
Has this ever happened to you? iTunes store and my appleid account is not accepting the security code on the Visa Gift Card I purchased today... It keeps telling me the security code is not valid
-
If I launch the migration workbench withou the SQLServer2K.jar file in the omwb/plugins directory - I get the missing plugins error message. If I put the file back into the directory - I enter the information (which is valid) and the workbench hangs
-
How do i download the fireworks3?
I have fireworks 3. I also have photoshop CS2. Back when Adobe still had phone support, they gave me a web address to download and install CS2. Now i have a new computer and need the download address for Fireworks3
-
Full of ink and HP 2700 says its empty
I JUST went to print something and it suddenly stopped and tells me that my printer is out of ink?!?! It has 1 brand new cartrage and 1 refilled one both not done more than two weeks ago...any help would be great. Thanks