Unable to connect to local wi-fi
Trying to connect to my local wifi but no go. Airport Extreme Router and Macbook Pro with OS X 10.7.5.
Hello intruder,
I would recommend this article to help troubleshoot the WIFI connection.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
This section in particular:
Symptom: My Mac does not connect to the Internet
Webpages do not open in Safari or other web browsers. These pages may be blank or you may receive an alert that "You are not connected to the Internet".
Internet applications such as Mail, iChat, or the App Store cannot connect to their servers.
Note: Routers may be configured to allow some services to use the Internet (such as Mail) while preventing other services from using the Internet (such as web browsers). If you are not sure whether your network is configured in this manner or not, contact your network administrator. If your network is not configured in this manner and some Internet applications work, but others do not, then the issue is probably not related to your Wi-Fi network.
Solution
All the best,
Sterling
Similar Messages
-
JDev - Debugger unable to connect to local process.
Hi,
JDeveloper-11.1.1.5.0
Iam able to execute the project in run mode. If I try to execute the same project in Debug mode, getting a message as
'Listening for transport dt_socket at address: 4003'
Debugger unable to connect to local process.
Process exited.
Earlier, I was able to debug the application. Since last few days, facing the issue
Please suggest, if you have any.
Thanks,
MSR.Hi,
Thanks for your response .
Sorry for delay in response. Actually I was on vacation since last few days.
Finally able to fix the issue. Issue is due to change in C:\Windows\System32\drivers\etc\hosts file. It's been updated for some other reason. Now I've updated the file with required changes. Now able to fix the issue.
-Samba -
Debugger unable to connect to local process
I am going thru the JDeveloper Introduction Tutorial and when I try to debug the application I get the following error in the message window:
C:\JDev\jdk\bin\javaw.exe -ojvm -XXdebug,quiet,port1069 -classpath C:\JDev\jdev\mywork\MyFirstApp\MyProject\classes myproject.Dog
Debugger unable to connect to local process.
Process exited.
I am using Windows XP Professional
JDeveloper 10.1.3.4.3673
If I just run the application then it works.
I also have the Sun Java JDK installed, as well as Eclipse and NetBeans installed.
I tried reinstalling JDeveloper but the debug function still does not work.
Any help will be highly appreciated.
Thanks,
RaffyI am trying to debug a JSP application and each time I try to debug I get the error:
[Starting OC4J using the following ports: HTTP=8989, RMI=23893, JMS=9239.]
C:\oracle\jdk\bin\javaw.exe -ojvm -XXdebug,quiet,port2774 -classpath C:\oracle\j2ee\home\oc4j.jar com.evermind.server.OC4JServer -config C:\oracle\jdev\system\oc4j-config\server.xml
Debugger attempting to connect to local process.[waiting for the server to complete its initialization...]
Debugger unable to connect to local process. Go into the Tools > Preferences, and under Debugger, modify the "Connection Retry Setting" and increase the number of attempts.
Hope this helps,
Rob -
Unable to connect to local host
Hi,
I have 64 bit operating system and got installed SQL Server Management Studio of 64 bit and the problem I am facing is unable to connect to local host, I have database mdf/ldf files in my local system and unable to connect to local system
tried localname/SQLEXPRESS and it did not work.SQL Server Management Studio is not enough, you also need to install SQL Server instance.
http://www.orcsweb.com/blog/mark-newnam/how-to-install-sql-server-2012-express-edition/
Keerthi Deep | Blog SQLServerF1 |
Facebook -
Unable to connect to local server
Folks:
When I tried to access an older Mac running Leopard (10.5.8) from my MacBook Pro running Mavericks (Finder: Go: Connect to Server: LocalServer), I was unable to connect and received a message,
'There was a problem connecting to the server "LocalServer". The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
I tried deleting any keychain refrerence to local computer.
I tried deleting the list of recent servers from the Finder.
I tried restarting both my laptop and the local server.
Nothing,
There is a local server icon under the "Shared" section of the sidebar of the Finder browsing window. I can find no way to delete this listing.
I can access the the Mavericks MBP from the old Leopard server via remote login, but I was unable access the old Leopard server from the new Mavericks running MBP.
I finally achiveved access by
1) Turning on SMB sharing for my account on the local server
System Preferences: Sharing: File Sharing: Options: SMB Sharing: MyAccount then storing my password.
2) On my MBP, connecting via smb.
Finder: Go: Connect to Server: [Enter smb://Localserver.local]
It finally worked, BUT … after successfully connecting to the local server, I now have TWO listings for Localserver in my Finder browser window, the live link and the old link which still says "Connecting."
I can't figure out how to get rid of the earlier afp link, OR how to make it work. I would prefer to use AFP as the SMB notation from both computers indicates that the storage of my password is not as secure.
Restaring the computer doesn't help.
I had a similiar problem when I upgraded to Mountain Lion, and I tried many of the same tricks to no avail. That problem seems to have fixed itself.
Anybody have any bright ideas?
Thanks much.I should have been more clear. This is on an 8-core Intel XServe.
I was able to use Server Admin locally on the machine for weeks. Now I can't. Nothing has changed or been altered on the machine during that period.
I can not connect to the server via Server Admin remotely or locally. I can connect via SSH, ARD, etc. and the system is still serving NFS just fine, so it's just the process that handles communication with Server Admin that is non responsive.
Something interesting from the syslog:
qt1 servermgrd[44258]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
qt1 servermgrd[44258]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null) , error = Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x1066a16c0 "Unable to open Directory node with name /LDAPv3/127.0.0.1."
qt1 DirectoryService[31]: DirectoryService has 42000 internal references open (due to clients), warning limit is 2000.
These lines repeated apprx. every 30 secs until I bounced the servermgrd. Now, I see that entry whenever I try to connect to the local server via Server Admin.
Now, this system is not a LDAP server, but I understand OSXS still uses LDAP for local directory info... I've tried restarting the related directory services as well, but still no joy.
It looks like my only recourse is a reboot, which is really not a great option for a dedicated file server. Am I the only one who has ever encountered this issue of Server Admin eventually losing contact with a server? -
Unable to connect to local database
I am running 8.1.7 and iSQL*Plus on one machine (duh). I am able to login to remote databases via isqlplus but cannot seem to login to the very database that was installed in order to get the isqlplus working, the one on the same machine. Do I need to do anything funky with the connect string? I know I am able to connect via regular SQL*Plus (but in that case, no connect string is necessary). All I get it the generic "Unable to connect, please try again" message. Thanks for the help...NOT!
Robert,
You can either leave the Oracle Connection Identifier field empty, or just enter the SID. Either way, it should connect. Use the same syntax you would in command line SQL*Plus.
Alison
iSQL*Plus Team -
Server Admin unable to connect to local server
Hey all. I've been using SLS to serve a Promise RAID via NFS for a few weeks now, and it's been stable and smooth. I've had Server Admin open all that time so I could watch the network usage graph via ARD. Today, Server Admin can no longer connect to the local server. I've tried stopping and starting com.apple.servermgrd but it still cannot connect. Is my only option at this point a reboot?
Has anyone else experienced this on SLS? I've always had stability issues with Server Admin in the past, but I'd been told the issues had been addressed in SLS. Could someone verify this? ThanksI should have been more clear. This is on an 8-core Intel XServe.
I was able to use Server Admin locally on the machine for weeks. Now I can't. Nothing has changed or been altered on the machine during that period.
I can not connect to the server via Server Admin remotely or locally. I can connect via SSH, ARD, etc. and the system is still serving NFS just fine, so it's just the process that handles communication with Server Admin that is non responsive.
Something interesting from the syslog:
qt1 servermgrd[44258]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
qt1 servermgrd[44258]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null) , error = Error Domain=com.apple.OpenDirectory Code=2000 UserInfo=0x1066a16c0 "Unable to open Directory node with name /LDAPv3/127.0.0.1."
qt1 DirectoryService[31]: DirectoryService has 42000 internal references open (due to clients), warning limit is 2000.
These lines repeated apprx. every 30 secs until I bounced the servermgrd. Now, I see that entry whenever I try to connect to the local server via Server Admin.
Now, this system is not a LDAP server, but I understand OSXS still uses LDAP for local directory info... I've tried restarting the related directory services as well, but still no joy.
It looks like my only recourse is a reboot, which is really not a great option for a dedicated file server. Am I the only one who has ever encountered this issue of Server Admin eventually losing contact with a server? -
Unable to connect to local database ( without using tnsname )
hi guys
i have 2 database running on local machine.
db1 SID - orcl (install 1st)
db2 SID - unicode (install later)
Today i shutdown unicode database and stop its respective services.
on dos
i done a sqlplus scott/tiger, i got an error
ORA-12560: TNS:protocol adapter error
therefore
i done a
set ORACLE_SID=orcl
and i still get the same error.
Therefore i done the another way round. I shutdown orcl database, stop its services and STARTED unicode database and its services.
I have remove the ORACLE_SID enviroment variable.
Now, i issue in command prompt
sqlplus scott/tiger
i am connected to the unicode database!
Now i shutdown unicode database and startup ORCL database..
and i issue a
sqlplus scott/tiger@ORCL..
I HAVE No problem connecting to it..
May i know why do i have to provide the TNSname for ORCL database and i do not have to for the UNICODE database..
Both are local on my database.
what is wrong ?
by the way, i am on XP.
thanks!hi paul,
sorry for the late reply.
I was out of town this weekend.
thank you so much for replying..
Here is my test results.
inside command prompt
(started both services - OracleServiceOrcl and OracleServiceUnicode)
set ORACLE_SID=orcl
sqlplus / as sysdba;
sys@orcl> exit
set ORACLE_SID=unicode
sqlplus / as sysdba;
sys@unicode> exit
Well, if i explicity set the ORACLE_SID, it works..
So out of curiousity, i done this testing..
1) connect to both database and shut them down
2) stop their services
3) start only ORCL service
4) close and reopen command prompt to remove the ORACLE_SID enviroment var
sqlplus / as sysdba;
Error: ORA-12560: TNS: protocol adapter error
ok..
5)now i stop the ORCL service
6) and i start the UNICODE service
then i issue
sqlplus / as sysdba;
sys@unicode>
I have got no local or two_Task variable set, i have got no oracle_sid, nor oracle_home environment variable set.
Any idea paul ?
Hope to hear your advice.
Best Regards,
Noob -
Hi,
Having an issue redirecting to a local printer when using a remote desktop session initiated through from a Essentials 2012 R2 server via remote web workspace on a Win 8.1 client, it doesn't pick up the Local printer, or even give the option of which
local resources to use on connection, just goes straight through and displays the remote desktop on connection.
I know its not a server global policy issue as it works fine on a Win 7 client with the same user being able to print locally whilst in a RD session
Any idea's as to how I can resolve this issue and enable local redirected printing or at least give me the options of specifiying which resources to connect on the local machine at the start of a session.
It's complicated I think as the essentials box is acting as the gateway so I cannot setup a session directly, the certificates are all working correctly so I am confused as to whats causing the issue.
Any help would be appreciated.Hi,
Thank you for posting in Windows Server Forum.
Please try to connect the printer with IP address and check the result. You can go through beneath article might helpful in your case.
Windows Server 2012 Essentials : Add a Network Printer
Try to change the selected print drivers:
1. Return back to the Devices and Printers window
2. Double click on your printer, and then double click on Customize your printer
3. Click on the Advanced tab, and change the print driver to the one we just installed.
4. If you wish, you can also click on the Sharing tab, and make the printer available.
More information.
Installing Network Printer to Windows Server 2012 Essentials
Hope it helps!
Thanks,
Dharmesh -
Unable to connect to local Exchange 2013 server when opening Exchange Management shell
Hi Everyone
Yesterday evenything was working fine, and then this morning, I`m unable to establish a connection with the Exchange shell. I receive the following errors. Any help is appreciated.
Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #55:
Want to view the mounted status of all mailbox databases? Type:
Get-MailboxDatabase -Status | Format-Table Name, Server, Mounted
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
message : The client cannot connect to the destination specified in the request. Verify that the service on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.:
VERBOSE: Connecting to .
New-PSSession : Cannot bind parameter 'ConnectionUri'. Cannot convert value
"http:///powershell?serializationLevel=Full;ExchClientVer=15.0.516.32;clientApplication=ManagementShell;TargetServer="
to type "System.Uri". Error: "Invalid URI: The hostname could not be parsed."
At line:1 char:30
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (:) [New-PSSession], ParameterBindingException
+ FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewPSSessionCommand
[PS] C:\Windows\system32>
Ernie Prescott
Updated information.
I can succussfully connect to the exchange powershell from a remote computer, using this method.
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
http://<FQDN of Exchange 2013 Client Access server>/PowerShell/ -Authentication Kerberos
Import-PSSession $Session
So the problem is localised on the server.
RegardsHi
Try the steps for Error 1 on this link
http://www.petenetlive.com/KB/Article/0000477.htm
Hope it will help
Cheers
If you have any feedback on our support, please click
here
Zi Feng
TechNet Community Support -
Unable to connect to local database... (what hsould i do ?)
hi guys,
I am having this error when i startup my LOCAL database. it says
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER'
i revert back everything to very very basic.
now in my
LISTENER.ORA
I have only this.
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521))
IN my TNSNAMES.ORA
i have got this,
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = szejie)(PORT = 1521)
IN MY pfile or SPFILE, i have got this
*.local_listener='LISTENER'
WHEN I type STARTUP in SQLPLUS, i still got this error
SYS@orcl on 07-MAR-09> startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER'
WILL PMON, automatically register my ORCL service with the the LISTENER ?
What should i do ?
Please help thanks.
Best Regards,
NoobHello,
Are you trying to register different port than default port 1521?
Do this or take local_listener completly out of your pfile and try with out
Edit your sqlnet.ora and add the value of NAMES.DEFAULT_DOMAIN to the alias in the tnsnames.ora:
set the domain to "world"
*sqlnet.ora:*
NAMES.DEFAULT_DOMAIN=world
init.ora:
LOCAL_LISTENER=LISTENER
In order to resolve this issue with LISTENER, it is necessary to add the domain "world" to the tnsnames.ora file entry
Or Edit init.ora file and remove loca_listener from it.
sqlplus "/as sysdba"
sql> startup nomount pfile='/path_to_pfile/init.ora'; -- it will process all the init.ora parameter and let you know if you have to resolve more
If successfully processed
sql> alter database mount;
sql> alter database open;
Once successfully opened, then shutdown it down
sql> shutdown immediate;
sql> create spfile from pfile='/path_to_pfile/init.ora';
sql>startup;Regards -
Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server All rights reserved.
2009-11-06 09:49:52.56 Server Server process ID is 5912.
2009-11-06 09:49:52.56 Server Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server Registry startup parameters:
2009-11-06 09:49:52.56 Server -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name: Application
Source: SQLSERVERAGENT
Date: 06.11.2009 10:09:52
Event ID: 103
Task Category: Service Control
Level: Error
Keywords: Classic
User: N/A
Computer: vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">103</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
<EventRecordID>8486</EventRecordID>
<Channel>Application</Channel>
<Computer>vie-eu-arc-02.global.domain</Computer>
<Security />
</System>
<EventData>
<Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions -
Server unable to connect locally in general
I appear to be unable to connect to anything that is hosted on my server using IE and various other web browsers on the server this makes trouble shooting IIS difficult since it means I have to enable full errors for the world to see.
This page can’t be displayed
Make sure the web address http://www.****.co.uk is correct. (The URL is * for obvious reasons)
Look for the page with your search engine.
Refresh the page in a few minutes
Also I appear to be unable to connect to the local mySQL server for some reason. As stated in the title the server appears to be unable to connect to anything that is hosted locally, be it 127.0.0.1, localhost or even connecting to its own IP address.
Any help Will be much appreciated, thanks.They may be able to help over here.
http://forums.iis.net/1052.aspx/1?Troubleshooting
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Unable to connect FR studio from local desktop to HFR server
Hi Gurus,
I have installed HFR on client server and able to connect studio with server.
When i tried to connect from local desktop to HFR server, I am unable to connect to the HFR server.
error as " You are not authroized to this functionality, please contact your administrator.
Hyperion: 11.1.2.1
database: 11.2.0.2
changed the ports while configuring.
for FR given as 8010 and RA framework given as 8020.ports are opened.
please let me know your suggestions to resolve this. am i missing something?
Thanks!"You Are Not Authorized To Use This Functionality" Error Occurs When Logging On To Financial Reporting Studio From Workstation [ID 1319745.1]
You are trying to log into the Financial Reporting Studio from with a properly provisioned user ID (including administrator IDs), but you get an error: "You are not authorized for this functionality."
Cause
The Financial Reporting (FR) Report Server box has multiple Network Interface Cards (NICs), and the one used by the Report Server is listed second in the binding order.
When a connection is requested of the FR Server from the FR Studio, the server returns an IP address to the Studio client. The server will, by design, return the first IP listed in the Server Network Interface's bind order. If this first IP is not the one associated with the FR Report Server, the FR Studio login error will result.
Solution
1. Review the Microsoft HELP menu on the FR Report Server for information on changing the bind order of the Network Interface Cards.
2. Change the binding order of the primary NIC on the FR Report Server box so that the FR Report Server IP address is 1st in the bind order.
3. Reboot the FR Report Server Box.
Alternately, if it is not necessary to have multiple NICs active on the server, you can disable all but the one used by the FR Report Service. -
Network host HPF.local is busy - Unable to connect to printer;
Recently when trying to print with a wifi bonjour networked OfficeJet J4680 this is the notice I receive, and it will never print.
Does anyone have any advice other than throwing the printer, or my computer out of the window?
Network host 'HPFBlah.local' is busy; will retry in 30 seconds...
Eventually the notice will change to...
'Unable to connect to printer; will retry in 30 seconds...';Removing the wifi networked Printer from System Preferences > Printers, and then turning OFF the OfficeJet's wifi option, and instead plugging it into the Airport with a USB cable resolved the issue.
Maybe you are looking for
-
HDR Toning Error 48: File or Folder Does Not Exist
After migrating to a new computer HDR Toning is no longer available. I get a pop-up: Error 48: File or Folder Does Not Exist Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx"); What's the fix for this, if a
-
Clear the temporary tablespace
Dear All, I've created a database in 10G (10.2.0). But currently running with a space problem in temporary tablespace. My database in 365X24 hrs. in such situation how to clear the temporary tablespace by keeping the database open for future operatio
-
Hi Team, I am trying to upgrade my DMP(4400G) from 5.2.1 to 5.2.2 version. During the last upgrade from 5.1 to 5.2.1 few units got some problem. Now these units are not discovered by DMM or even i don,t get Display(CISCO page with IP add). I tried to
-
Lost green tick on top of screen
I have lost the green tick that sits next to the broadbard icon on top right of the screen which tells you if you have internet access? Can someone help?
-
**New Official nForce Drivers from Nvidia v4.27**
grab them here Markoul