Unable to connect to mail server

Something changed in the last 24 hours. Yesterday I was able to send and receive mail using Apple Mail and my POP account. Today I cannot get to the mail server.
I have been on the phone with my ISP: Completely unhelpful, will not help with supporting a POP account that isn't "theirs".
I have been on the phone multiple times with my email host (GoDaddy). They have walked through resetting accounts on both Apple Mail and trying Entourage to see if that worked instead. They gave up, saying that since I can get inot my mail account using their web-based client, the problem is't theirs.
Both clients on my MacBook give basically the same error messsage, that the mail server timed out.
Apple Mail error is: The connection to the server on port 110 timed out.
Connection Doctor says that mail is connected to the internet, smtp is connected and working, but couldn't connect to the POP server.
I haven'tinstalled any software between yesterday and today, and desperately need a mail client, any mail client, to work again!
Thanks in advance for any help!
MacBook Mac OS X (10.4.6)

Yes, I am using OS X 10.4.6. My MacBook just arrived in the post a couple of days ago...
I just went to Sys preferences and temporarily disabled all the communication options other than the one I am using.
I connect to the internet through a external dial-up modem. My internet connection is fine (using ti right now to send this post), and still the smpt outbound shows connected and working in Connection Doctor. It's still just the actual connect to the mail account.
I'd ideally like to figure out weither this is an Apple problem, and ISP problem, or a mail hosting problem so I know whoo to hound to help me fix it.
MacBook Mac OS X (10.4.6)

Similar Messages

Unable to connect to mail server on iphone

I have been getting an" unable to connect to yahoo mail server" on my iphone since yesterday. I have re-started the phone, deleted my mail account and re-added and nothing seems to work. Any ideas?

Ask your email provider for the correct settings to use to set it up on your phone.

Oracle User Messaging Service unable to connect to Mail server through SSL

Hi,
I have a SOA server setup with User Messaging Service, with email driver installed. I set it up to connect to an SMTP server over SSL.
Using the user messaging sample app from samplecode.oracle.com, I encountered the following error:
javax.mail.MessagingException: Exception reading response; nested exception is: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
After doing some research, I copied the cert from the Mail server and put in in the JDK keystore (jdk\jre\lib\security\cacert) using keytool -importcert command. Then I did configure the SOA server to use that keystore. However I still encountered the above mentioned exception.
Anyone has encountered and solve the problem?
Appreciate any pointers :)
yee thian

Hi,
SAP support suggested to check the following notes:
827958 - Javascript Errors in IC WebClient, Messaging does not work
871851 and 872720 - JRE version
828884 - SAM (Simple ABAP messaging)
844929
924443
927566
927567
Regards,
Bruno Mikio

Asha 200 Email - unable to connect to mail server.

Hello, i bought my nokia few weeks ago.. but i can't use my email application.
When i start Mail appl, it ask me to read and agree nokia policy. than it tries to connect but give me this error: "connection fail, try later".
Nokia browser and all other appl work well.. please help me to solve it.
Domenico

I've got the same problem as dome_86.
Plus with the Store and with the OS' update: "there is no web connection available".
But the browser is working.
Please reply

I can't receive my incoming mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution?

I can't receive my incoming mail in Mac Mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution? I am able to get my incoming messages via yahoo website but not through the Mail app.

Try this, if it is not the correct department, ask them for the number or to be transfered..
Call 1-800-318-0612 for Login Help
Also on most autmated systems, if you hit 00000, or ##### you can sometimes get thru to a person.
Is Yahoo your Internet provider? Do you have a local provider? ei:AT&T, SBC, cable co, check who you make your check or epatment to...etc, If so I would start there, but if no joy go to the "Mothership"
I may be wrong about this, (it's been a long time now) I may have deleted my mail account from Mail (after writing down all the info from all General/accounts, and the rest of the tabs, and then added a new account using my existing email address, and it may have "walked me thru the rest of the proceedure".
But like I said it was a long time ago 3-4 years, but that may have been the path I ended up taking, make sure to write all the info down in case you need to re-enter it all manually. Then try calling them.
All the best

N8 Email - Unable to connect to mail service serve...

I have my Nokia N8 for a good few months. Email stop sync-ing so deleted my 1 and only email account (Hotmail) and now I can not get any email back.
I have played with internet settings, rebooted my phone but still nothing.
Basically, this is what happens:
Got to set up email
Some text comes up about what mail can do and you have the option of start of exit
Press start, and it says preparing for set up, then it comes up with Unable to connect to mail service server. try again later.
The next options I have are to enter email and password or cancel.
If I enter email and password it comes up with an option to click on mail for exchange and I have to start entering user name, domain, etc or I can exit.
So, can anyone help me restore the email function. When I got the phone you had an option of hotmail, yahoo, etc etc. And that is what I want back.
Also I should mention, I don't have any options around pushing or pulling email as it never gets that far into setting up email.
I live in the UK, so was wondering if I should just take it into my local carphone warehouse who deal with Nokia support and demand it gets repaired? It's part of what I paid for so they should repair/replace for me?
Any advice would be good,
Thanks
Vicki
Solved!
Go to Solution.

For the answer of both how and why please refer to the post by Abi99 earlier this week:
http://discussions.nokia.com/t5/Symbian-Devices/quot-Unable-to-connect-to-mail-service-server-quot-o...
Please click the star below that post to draw attention to the expired Nokia certificate, which Microsoft Mobile Oy must renew to solve the problem! - Also use the false username and false password trick, if it is a first time mail setup on a freshly reset Symbian phone, to avoid any Nokia Messaging clutter, and then input server details manually.
EDIT: The expired certificate was renewed is now valid until 2015-07-10
Hans

TS3899 I have a hotmail account set up on my ipod, but in the past two weeks I have had issues trying to pull up mail. I get a "unable to connect to the server" message. Any Ideas?

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

I have a 4th gen ipod toch. As of the past two weeks I have been unable to receive my hotmail on the ipod. I get a "unable to connect to the server" message and all older emails are now gone.

E71- unable to connect IMAP outgoing server

HI,
After I re-installed software in my E71 I have faced problem that I unable to connect IMAP outgoing server it was earlier fine Even Incoming mails are no problem currently.
please fix this issue
regards
nizar
MODERATOR'S NOTE:
We would like to inform you that we have edited your post and your personal details (e.g. full name, mobile number, email address) was removed as it is unwise to publish personal details on forums like this.
We kindly ask you not to share personal information on this forum.

not enough to go on.
what country are you in?
what carrier do you use?
what do you currently have for your outbound server and port?

Unable to Connect to the Server and WLI Domain problem

Hi All
this is the details
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
Domain problem---------------------------------------------
I created WLI domain like this is it correct ?
Next I used Quick start's --Configure New Server
then single server option radio selected
then
single server name--myserver
server listner address---????????? please tell me
server listening port 7001
ssl listnening port 7002
username bala
password subramaniam
verify password subramaniam
c:\bea\user_projects\CIBC
configure database mail--
email address- [email protected]
email host: what need to give ??????? please tell me----
after I created domain called CBC it is in the
c:\bea\user_projects\CBC
then I saw it consists
1)wlai folder
2)dbinfo
3)application
4)keys
5)scripts
setdatabase.cmd
startweblogic.cmd
startmanagedweblogic.cmd
setwlidomaindata.cmd
wliconfig.cmd
checkdomain.cmd
Wliconfig.jar
startweblogic.cmd
stopweblogic.cmd
I try to startweblogic.cmd it open and closed no action
please tell me what is the problem????????????
with regards
bala

Oh boy! Let me see what's going on. Are you using the VZW Cloud or the BUA app? Please try downloading the VZW Cloud app if you dont already have it. And once downloaded. Tap the 3 bars in the upper corner and go down to "TOOLS", then tap "RESTORE CONTENT". That should do it!
VanetrisC_VZW
Follow us on Twitter @VZWSupport

Can't log in to Lion Server. Open Directory Log Message says: unable to connect to password server

I am setting up Lion Server. I can't log in to Lion Server from client.
Checking the Open Directory Log: says: "unable to connect to password server" or
"3394.14268, Node: /LDAPv3/127.0.0.1, Module: AppleODClient - unable to read Password Server response - connection to Password Server was closed, socket fd 18 (5205)"
Thanks for help with this.

I never discovered the problem, and instead rebuilt the server from the ground up. I followed instructions at this discussion thread. Very helpful.
How To Install A (Almost) Working Lion Server With Profile Management/SSL/OD/Mail/iCal/Address Book/VNC/Web/etc.
I have had some log-in problems with users. I have found that restarting the server helps. If this doesn't work, I rebuild permissions on the server, followed by opening up Workgroup Manager, go to the user's password, click on options and require that the user change password on the next log-in. For some reason, this will usually fix the problem. I then log in as the user, and "change" the password to the original one. Also note, that if you import a user, the password is not brought in. You must enter it for each user that you imported. Even so, I have often had to resort to the re-set password procedure to enable a log-in.

Need some visual way to tell if connected to mail server

I'm hoping that Leopard includes some visual clue on the Mail dock icon to let us know if we're connected to the mail server. If you don't have the Apple Mail app window open you'll never know. Even Gmail notifier puts a red line through it's menu icon to let you know if it's unable to access their mail server. Long overdue for Apple Mail.
lenn

You mean when an account or accounts are checked for new messages and are unable to connect to an account's incoming mail server for whatever reason since Mail does not maintain a constant connection with an account's mail server.
In my experience Mail already provides such a visual clue - the Mail icon bounces in the Dock when this occurs.

Error calling report FRM-41213 unable to connect to Report Server

Hi,
I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
I installed it in both Windows 2000 SP4 and Windows XP SP2.
I would like to call a Report using a button inside Oracle Form.
I create my own Report Server, using : rwserver server=repsrv
A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
In Form (inside a button -> WHEN-BUTTON-PRESSED) :
1. Using RUN_REPORT_OBJECT()
   rep_id := find_report_object('REPORT10');
     if not id_null(rep_id) then
       v_rep := run_report_object(rep_id);
     else
          message('Null');
   end if;
   a. If I did not specify the name of the Report Server in Reports node of Form's property object
(I leave it blank)
The following error appear :
FRM-41211: Integration error, SSL failure running another product
b. If I specify the name of the Report Server : repsrv
The following error appear :
FRM-41213: Unable to connect to Reports Server repsrv
2. Using WEB.SHOW_DOCUMENT()
a. If did not I specify the server name in the parameter
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server rep_<computer_name> failed
b. If I specify the server name in the parameter --> server='repsrv'
WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
REP-51002: Bind to Reports Server repsrv failed
In Report :
If I try to navigate manually to :
1. http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally,
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
The following error occured
REP-51002: Bind to Reports Server repsrv failed
4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
5. I have tried to use rwrun in command line.
rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
Question :
1. What supposed to be done?
The Report server is ready, but the web browser seems unable to connect to Report Server.
2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Problem solved.
I got the solution from another post.
Re: REP-51002: Bind to Reports Server rep failed
Here are the step I did.
Note : Please make backup for the following file : rwnetwork.conf
- In file rwnetwork.conf, remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
It should look like this :
<namingService name="Cos" host="blahblah" port="14021"/>
- I did not change the : name="Cos", since I do not understand what does it for
- Save you changes.
- Start the OC4J.
- Find the location of : namingservice.bat (on Windows platform)
- execute in the command line : namingservice.bat 14021
- finally start the report in the web browser
Note:
To shutdown the namingservice, use : namingservice.bat 14021 shutdown
Regards.
Buntoro

[Solved] Samba log spam: Unable to connect to CUPS server

Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)

glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14)

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

I am wanting to update iphone to 4.3.3, however I am connected to the internet, yet itunes is telling me it is unable to connect to update server because i am not connected to the internet... please help

I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help

Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below. Thanks toonz, everything now ok.
Correct AnswerRe: Updating to 1.1.3                                                                        02-Feb-2008 23:19                                                    (in response to alibeau)
                        You can fix this by following the steps in this article:
http://docs.info.apple.com/article.html?artnum=304468
             Liked         (1)

Unable to connect to mail server

Similar Messages

Maybe you are looking for