Unable to connect to Mobile Network

Turned my blackberry off last night in the theater and now I can't connect to the mobile network - and therefore can't do anything with my blackberry. I have tried to restore network connections, but it tells me that there are no available networks due to radio being off??? How do I turn the radio back on???

Hakeyez88 wrote:
"Running the test again I get the signal level @ -256 dBm. Not sure if that helps anyone help me with this issue .."
and
"BlackBerry Registration: No
Connected to BlackBerry: No
BlackBerry PIN Email: No"
Hi and welcome to the forums!
Between the two posts your are not registered on the network and your radio signal at -256 is extremely weak.
I would reboot see if your -dbm level is -100 or less and reregister the phone.
If it doesn't reregister I would make sure all your data is backed up with Desktop Manager, perform a security wipe and return the phone to the carrier.
Make sure you get a new unit as opposed to a field replacement unit or a refurbished phone. You are currently holding what will be someone else's refurbished phone, OK?
Thanks
Bifocals
KB02526 Unable to receive email messages until a hard reset is performed on the BlackBerry smartphone
KB02270 How to troubleshoot issues sending PIN messages from a BlackBerry smartphone
KB05099 Steps to take before selling, or after buying, a previously owned BlackBerry smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

S860 and X2, Google not connecting on mobile network.

I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils

Hi Ragge
Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
The S820 has been relesed in May 2013.
''Tried to reverse OS a few steps back...''
How did you do that?.
Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
If I move back downstairs it reconnects
This has only started happening in the past week or so
I've tried to forget and rejoin the network, but this doesn't work
I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
Does anyone have any ideas what is causing this?

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

Why isnt my itouch not connecting to the wifi? everytime i try to conncect to a network and then i put in the password, it says unable to connect to this network! why is not working?????????? someone please help me!!!

Why isnt my itouch not connecting to the wifi? everytime I try to connect to a network and i put in the password it says "unable to connect to this network" why isnt working?! the password is correct and everything. I just dont understand why its not working. Someone please help me! thanks

Did it ever work with this WiFi system?
Do other devices work with this WiFi system?

EthernetIP, Unable to connect to the network path specified, Multiple NICs

I have not been able to find an answer concerning this error, so I am hoping someone can help.
Computer has LabVIEW 2013 with the NI-Industrial Communications for EtherNet/IP 1.2.1 addon with Win XP although I have verified the same setup with Win 7 x32 with the same results. I am using the EthernetIP CIP Get Attribute Single.vi and the corresponding "Set" vi.
I am using a pc with five network cards, one for the corporate network (dhcp) and four that are connected to four Rockwell PowerFlex 700S AC variable drives via CAT6 crossover cables. Each 700S drive controls a motor in an engine dyno teststand. The 700S drives have the latest available firmware installed. The four NIC/700S pairs have hard coded IP addresses with the appropriate subnet masks for proper routing. I can use the Windows "ping" command without errors. The program uses a QSM-PC architecture which I have four separate qsm loops that "talk" to the each drive, those loops constantly request three parameters from the drive, a boolean drive status array, the rpm , and the torque every 250ms using the CIP "Get" vi. That data is then sent to the main front panel via shared variables. When the operator wants to say change the rpm, a write command is inserted into the queue, and the CIP "Set" vi is used.
My problem is when I start the program, it is hit or miss on whether these loops will begin to loop through their states. If they start, the program is rock solid. When one of the loops does not start, which is most of the time, the error returned is the "-251723767 Unable to connect to the network path specified". See the attached pictures. So if I disable three of the four loops, the error never shows up. Adding another loop or more will cause the error. Slowing down the request rate does not fix the issue and it is not always the same loop that will throw the error. Each qsm loop has its own session name and its own action engine with the only common thing amongst the action engines would be the "Get" and "Set" EthernetIP VIs.
No more ideas.....Kevin
Attachments:
error.PNG ‏12 KB
clone_error.PNG ‏30 KB

250 ms is a pretty slow update rate for CIP so Why use a nic for each drive? Use 1 drive nic in your PC and use a network switch to connect with your drives. If You have more then 1 nic you need to specify the nic to use for each loop for each drive IP address so the drive and the loops are using the correct IP settings. You should be able to use as low as 30 ms updates with no problems.

Unable to connect Wi-Fi network after ISO 6 update

unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

Message "WLAN: Unable to connect. Wlan Network not...

Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
Thanks
Message Edited by darkcraft on 13-Jul-2009 09:47 PM

tomasvaril wrote:
Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
Have you tried swithing a WLAN channel that your router uses?
Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.

No connection with mobile network

My phone (which was bought only 2 days ago) has suddenly lost connection with mobile network. "Emergency calls only" is written on lock screen, near signal power bar there is a small red 'x'. I tried turning it off and on, tacking sim card out and putting it back in, trying to connect to mobile network manually through the settings "Service providers" (it says "Could not connect to network now. Please try again later." when I try to connect manually), changing network mode (to all possible modes). Still no luck. I can't send an sms or make a call.
What should I do?

I got similar issue but the only thing is phones randomly disconnects itself from the mobile network in some days. Then no matter you manually search for the network and try registering, it simply wont connect to any network.Your only solution is to reset the phone or turn off and on and it again auto catches your operator.

HELP - IM UNABLE TO USE MY MOBILE NETWORK CONNECTION

guys i need your help. Im unabble to use my mobile network connection in spite of all the directives given by the various institutions. I was told by an expert that this has happened to a few BB10 users and that if I did not receive mobile network connection right after inserting my sim, there's no chance that I'll ever get to use my mobile network to browse . I am however able to use the wifi. Please reply help if you have any idea what i can do

sandey_bbe wrote:
so lond as i have credits, i should be able to browse with pay as you go.
Probably not, for the data plan.
You need to CALL them and MAKE SURE you have the data plan actually on your account, not just assume it.
And this has nothing to do with pins on the SIM card missing etc., since your SIM is actually working.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPod Touch unable to connect to wireless network.

I just got an iPod Touch 4 for my birthday (w00t), however I cannot seem to get it to connect to my wireless router. Everytime I try, it says Unable to connect to network. I reset the routers password, but it didn't do anything. I saw in other threads people said to switch ti WPA security, but mine is already set as WPA Personal. I'm not sure what to do! Please help!

NO I did not and thank you very much for the advice. My problem was stated incorrectly in that while I am able to connect to the wireless from that point on I am unable to connect to the internet. I will check the article referred to.

Suddenly unable to connect to wireless network...exhausted all fixes

I’ve got an odd problem with my two-week old MacBook Pro and its connection to my wireless network. I’ve done what I think is pretty exhaustive troubleshooting, but remain baffled. Here’s the story.
This morning I connected to my wireless network (DSL 2WIRE modem/router) with no problem. This afternoon I returned and Airport refused to connect, giving me the error message, “Airport is unable to connect to the wireless network…” The network shows up as being available, but when I attempt to connect, it wont. (I didn’t make any changes or install any programs this morning).
Here’s what I’ve done:
[1] Restarted the router
[2] Repaired permissions
[3] Deleted the network’s entry in Keychain Access
[4] Re-entered my WEP code (assuring it is in correctly; I’ve tried both with the “$” and without)
[5] Used interface robustness and without.
[6] Attempted to join the network from the System Preferences>Network.Airport route.
[7] Created a new account and tried connecting.
Other tidbits of information:
[1] Another MacBook in the house connects to the network with no problem.
[2] My MacBook can connect to another (unsecured) network that I can “see” in my house.
So, it would seem my Airport card is working okay.
Any ideas??

Some more info (in case anyone is listening...)
I tried turning off the WEP code and could connect. (Since I share files on my home network, this isn't a "solution").
I also tried Resetting the MacBook Pro System Management Controller (SMC)(See: http://docs.info.apple.com/article.html?artnum=303319). I did this (I think -- there wasn't any indication that the reset "took"), but alas -- no luck.
I gave Apple Care a call, but the support guy, while courteous and all, didn't have anything to offer other than telling me to take it in to an Apple Store for a repair (clearly it isn't a hardware issue).
Heeellllppppp!

MacBook (10.4.11) is unable to connect to wifi networks

After updating with 10.4.11 (and the associated 2008-01 Airport update) a few months ago, my Intel MacBook has been unable to connect to my WPA2 network.
It will see my network name in the Airport drop-down menu, but fail to actually connect. The icon appears as if the notebook is rapidly connecting and disconnecting -- switching from five bars of signal to none and back again every few seconds. During this time, my MacBook never reports getting a connection, and all other devices on the network experience severe interference. I am able to connect to most, but not all, unsecured networks.
System Profiler reports my wireless card as AirPort Extreme (0x168C, 0x86), Firmware Version: 1.3.5 .
My router is a D-Link DGL-4300 with the most recent firmware. I am running an 802.11g network at 2.437ghz.
I've tried the following already, unfortunately without success:
. Switching to WPA from WPA2
. Removing all the preferred networks from my System Preferences and adding them back in again.
. Removing all the network info in my keychain and reconnecting to the network from scratch
. Switching the router to channel 11 (away from 6)
. Turning Interference Robustness on and off
. Manually specifying IP and DNS in my network settings, rather than DHCP
. Removing all other wireless devices from the network
Looking elsewhere on the net I find that a few other people seem to have this problem, and so far the only solutions I've seen are "roll back to 10.4.9" and "disable security on your home network," both of which are obviously untenable for security reasons.
The one (and only) WPA-secured router I am able to connect to is the Airport at my local Genius Bar, so they're unable to help me.
Has anyone else seen this, or have any ideas?
Thanks.

Well, I downloaded Pacifist and the 10.4.11 Combo Update. Pacifist verified the AppleAirPort and AppleAirPort2 .kexts on my drive as matching the ones in the package, but I forcibly reinstalled them anyway and rebooted. Still no luck -- now the network is back to the four-bars-no-bars death loop without even popping up the error dialog.
Luckily however Pacifist turned out to be the solution to the problem. A Google search on "Apple broke Airport" eventually led me to this thread with detailed instructions on rolling back to the previous version of the Airport driver, before the 2008-01 update: http://www.tuaw.com/2008/03/28/airport-extreme-update-2008-001-for-tiger/#c11509 504
I'll paraphrase it here for anyone else who has this problem:
Download the Airport Extreme client software version 2007-004
from http://tinyurl.com/yw3dnu.
Download and install Pacifist from www.charlessoft.com.
Delete /system/library/extensions/io80211family.kext
In Pacifist, open AirportExtremeUpdate2007004.dmg
and expand the sub folders until you can see the io80211family.kext
extract and direct it to extract the file to the
/system/library/extensions/ folder
restart
So now my Airport works again, though without whatever security they put in with 2008-01, I guess.
I suppose I'll have to embargo future OS updates until this gets straightened out, or else re-rollback the io80211family.kext after each one. I sure would like to talk to whoever wrote this update at Apple!
Thanks for your time, BD.

I am unable to connect my mobile hotspot as wifi for ipad - Always dismiss

I am unable to connect my blackberry mobile hotspot as wifi for ipad but during connecting message comes as dismiss

What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

Unable to connect to wifi network

I put my (2 day old) iPT to sleep last night in the middle of watching some Netflix streaming video. When I woke it up this morning, the Netflix app tried to resume play and failed. The iPT started asking for a network password. I made a few careful attempts to enter it (it is one of those 64 random character things, and my iPT typing skills are nascent) and it failed to connect. Finally iPT began saying 'unable to connect' and stopped asking for a password. I checked the router, connected with my laptop, no problems there. Perhaps the router has some lockout after failed login attempts, but if so I could not discover the setting in order to reset it.
Finally, I reset the iPT network settings, and was able to connect and enter the password successfully.
My question is this: why did this happen, and can I be at all confident it won't happen again?
I've never had a similar problem with other wifi devices I've used with this router since setting it up over a year ago, so to my mind it is obvious there is a problem with the iPT wifi hardware or software. Needless to say, it is a pain to enter the wifi key once, let alone every few days.

TomGeo wrote:
I put my (2 day old) iPT to sleep last night in the middle of watching some Netflix streaming video. When I woke it up this morning, the Netflix app tried to resume play and failed. The iPT started asking for a network password. I made a few careful attempts to enter it (it is one of those 64 random character things, and my iPT typing skills are nascent) and it failed to connect. Finally iPT began saying 'unable to connect' and stopped asking for a password. I checked the router, connected with my laptop, no problems there. Perhaps the router has some lockout after failed login attempts, but if so I could not discover the setting in order to reset it.
Finally, I reset the iPT network settings, and was able to connect and enter the password successfully.
My question is this: why did this happen, and can I be at all confident it won't happen again?
I've never had a similar problem with other wifi devices I've used with this router since setting it up over a year ago, so to my mind it is obvious there is a problem with the iPT wifi hardware or software. Needless to say, it is a pain to enter the wifi key once, let alone every few days.
Your post indicates that you are using WEP security. Do as Apple suggests and move to WPA or WPA2 security. WEP is obsolete and can be cracked in seconds with widely available software.
See http://support.apple.com/kb/TS1398

I am unable to connect to mobile metwork

I HAVE PURCHASED IPHONE 4 FROM PHILLIPINES AS FACTORY UNLOCK NOW WHEN I CAME TO INDIA KOLKATA I AM UNABLE TO COONECT TO MY MOBILE NETWORK I WENT INTO STEEINGS GENERAL AND ABOUT AND SAW CARRIER AS VODAPHONE 10.0 THIS IS OK BUT NOT CONNECTION

I would talk to your wireless provider to make sure that the SIM card you are using is properly activated.
- Greg

Unable to connect to Mobile Network

Similar Messages

Maybe you are looking for