Unable to Connect to My Canon Printers via Wifi

I have two Canon printer an MG7120 and a pro 100. Recently I have not been able to connect to them via wifi. The computer is running windows 7. I have Uninstalled and reinstalled all software. When Reinstalling I now get and error saying that the driver installed failed. I have tried to even install the latest drivers from the canon website. I have two other computers with windows 8.1 the connect fine. The computer is my Photo editing computer so it really needs to be connected. Connecting via USB works fine. Any help would be appreciated.

I would start by making certain you have downloaded the Kodak drivers for your printer and Operating System. I suggest starting at the Kodak site.
Just so you know... you have posted a question about a Kodak product in a forum for an Apple software application.

Similar Messages

Unable to connect my I-phone 4S via wifi from the Air-port express even though the signal is good and all my other devices (macBook air and speakers) are working properly? Already tried to change the channels on the Airport but still nothing.

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
online & server 2008 on my LAN , now I have changed the server for Online)
Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
error code is as follows -
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
System.Net.WebException -- The operation has timed out
Source
System.Web.Services
Stack Trace:
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

Hi Sagar,
First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
Please try to run iisreset on the WSUS server, then try to reconnect.
Also, please try to run the server cleanup wizard to remove the unused update.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have been unable to connect to the iTunes store via my computer for the last 2 days. What is going on?

I have been unable to connect to the iTunes store via my computer for the last few days. It is rather frustrating. Is something wrong?

Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Unable to connect to data mining server via data miner

Hello!
After installing Critical Patch October 2005 we receive the following error message while trying to connect to the data mining server: "Unable to connect to data mining server".
Before installing the patch we had no problems connecting via data miner (Windows 2000 Client).
We are running Oracle DB 10.1.0.3 on SUSE 9 Linux.
Any help would be appreciated.
Regards
Alexander

Hello Xiafang!
Thanks for your reply.
The query results are:
SQL> conn sys@oraentw as sysdba
Enter password:
Connected.
SQL> select comp_id, version, status from dba_registry;
COMP_ID VERSION STATUS
WK 10.1.0.3.0 VALID
EM 10.1.0.3.0 VALID
XDB 10.1.0.3.0 VALID
AMD 10.1.0.3.0 VALID
CONTEXT 10.1.0.3.0 VALID
SDO 10.1.0.3.0 VALID
ORDIM 10.1.0.3.0 VALID
EXF 10.1.0.3.0 VALID
OWM 10.1.0.2.0 VALID
ODM 10.1.0.3.0 VALID
CATALOG 10.1.0.3.0 VALID
COMP_ID VERSION STATUS
CATPROC 10.1.0.3.0 VALID
JAVAVM 10.1.0.3.0 VALID
XML 10.1.0.3.0 VALID
CATJAVA 10.1.0.3.0 VALID
APS 10.1.0.3.0 VALID
XOQ 10.1.0.3.0 VALID
17 rows selected.
SQL> select parameter, value from v$option where parameter like '%Data Minin%';
PARAMETER
VALUE
Data Mining
TRUE
Data Mining Scoring Engine
FALSE
What do you suggest to do next?
Thanks in advance
Alexander

Unable to connect to Cox SMTP server via home wifi

Two weeks ago my wife's iPad became unable to send email via her Cox email account after a year of working perfectly. Shortly thereafter, my iPhone Cox mail account started acting the same way when it was connected to my home network. When the iPhone is connected via 4G, the Cox mail account works fine. My Yahoo account on my iPhone works perfectly. My wife has a Yahoo account on her iPad that also works flawlessly.
I have a 5th Generation Airport Extreme running 7.6.3. The ISP for this location is Charter.
I can ping the Cox SMTP server from my Macbook Pro connected to this network. My connection to the Cox account via Apple Mail on the MBP also works, although it has sporadically also exhibited the same problem.
I have tried to set up a new Cox account on my wife's iPad, my iPhone, and my iPad. Once I enter the credentials, the account setup gets hung at the Verifying step and fails.
For some reason, the iOS devices are unable to communicate through my Airport Extreme to the Cox SMTP server.
At the time the problem started, there were no relevant software or firmware updates applied.
And don't tell me this is a Mail problem. If this were a Mail problem, how come it works fine when connected to the cellular network?

Yahoo settings for both POP and IMAP are in the linked article.
Yahoo POP Mail Settings

Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

Hi,
I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect.
At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity.
No error is generated by the client when it tries to connect it just stops trying to connect after a while.
On the Gateways servers event logs for
Things I have looked into so far.
- I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical.
- Connecting from an older client version works fine.
I'm not sure what else can be checked does anyone have any ideas?

Hi,
1. What entries are you seeing in the RD Gateway's log? Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
2. How come you are not forwarding UDP port 3391 in addition to TCP port 443? It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
3. Are there any non-default group policy settings being applied to the servers and/or client PCs? To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
been added, etc., that are applicable to the servers and or client PCs.
-TP

Unable to connect Nokia 6230i to PC via DKU-2

When I tries to connect Nokia 6230i to PC via DKU-2 using Nokia PC Suite, a prompt occurs on phone "Use phone as storage device". On accepting, deactivating message appears on phone and again it prompts for storage device and phone doesn't connects to PC.
Phone connects to PC via Bluetooth correctly.

Hi,
I can not find any other reason for your problem....one thing what you could try to do is set that Shell value from register again (maybe it includes something what I can not see in log file)
So try this:
1. Click Start menu, Run and type: Regedit and then OK.
2. Open key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
3. Select name Shell, click Menu and Modify.
4. Clear exist value and write there Explorer.exe again.

Macbook Pro can't find Canon MG6350 via wifi

Macbook Pro purchased earlier this year and running OS X (10.9.1) can no longer find my new Canon MG6350 printer via wifi. Printer can also not be found by other new Macbook Pro, iPad Air or iPhones.
I have reset Canon printer, Macbook Pro printer system, downloaded latest drivers, tried inputing Canon printer IP address. Nothing works permanently. I temporary resolved issue by re-enabling Boujour on Canon printer settings, which magically allowed printer to appear on all devices, but this "fix" has now stopped working. Can also see all devices on BT Home Hub 3 when logged in as administrator.
I can print via USB, but want wifi printing to work. Very frustrated, as it worked brilliantly before latest OS X / iOS upgrades. Any suggestions or help appreciated.

Thank you for your interest Clinton.
Yes of course the printer connected to the wifi network. I can see all devices including the printer when logged on as Administrator on the BT Home Hub. I have also reset the Hub itself several times and reconnected all devices.
Note that I had no problem setting up the printer and all devices wirelessly on the network previously, and that this exact setup was working for months brilliantly and without issue until roughly the time I upgraded to the latest releases of OS and iOS on all my Apple devices.
I have also reset the printer to its factory setting several times, reconnected all devices to the network numerous times and have spent roughly four hours trying everything I can think of on both the printer and Mac to no avail. Hence my post. And yes all devices have the latest drivers as indicated by Apple and Canon.

Unable to connect Iphone 5 to Time Capsule Wifi

I have an intermittent problem where my Iphone 5 is unable to connect to my Home Wifi via Time Capsule.
Once I was watching youtube then suddenly realised I am on 3g and not connected to my Home Wifi.
I already configured my Time Capsule's AirPort Utility to the following setting:
Radio Mode: 802.11a/n - 802.11b/g/n (Automatic)
2.4GHz Channel: 3
5 GHz Channel: Automatic

I am able to scan the other networks from my neighbors which are secured so I am not sure what channels they are in. I am also able to see my network once in a while.
I had this problem with my Iphone 3gs before and the solution was to set my Time Capsule's 2.4GHz Channel to 3 (which also came from this forum)

I cannot access the external hard drive connected to my time capsule via wifi

I have two external hard drives (a WD mybook and an older Seagate, both HFS+ formatted) connected via a USB hub to my time capsule (which is also my wifi router).
Here's the funny thing: If I a connect my mac mini to the time capsule via an ethernet cable, both disks show up as normal in Finder - along with 'Data' under Time Capsule under Shared.
But if I disconnect the ethernet cable and connect to the router via wifi, there's no sign at all of the two disks - not in Finder, and not under 'Disks' in the Airport Utility.
Anyone out there with a solution?!

Hi William, and thanks for replying.
I do have a guest network set up (for exactly that reason that guests don't get access to shared disks) but am definitely not connected to it.
So sadly it has to be something else.

'UNABLE TO CONNECT' message when trying to access wifi

My 16gb iphone 3G has lost its capability to connect to wifi since upgrading to latest software. It will see available connections but when i try to connect it says 'unable to connect'
Tried various methods like resetting internet connection etc. Just wont connect.
Any ideas or solutions before i visit the genius bar next week?
Will apple replace a 20 month old phone for free?

I have a 32gb iPhone 4 with version 4.2.1 with a similar issue. However, my problem popped up out of the blue. Yesterday it connected to my home wi-fi with no problem, but today, it gives me the "Unable to join the network" message.
I'm certain it's not an issue with the network because I'm connected to the same network on my laptop right now. (As is every other wireless device in our home.)

Unable to connect N97 mini to PC via USB

Hi
I have not been able to connect my phone to my office today. I used it yesterday on the same PC. I tried connecting my colleague's E63 with the same cable and port and it works just fine. I don't even get the USB mode selection window when I connect my phone though it has been selected in the connectivity setting to ask for mode.
Please advise. I just bought the phone on 18th June.
Thanks
-MohitG
Solved!
Go to Solution.

Problem solved by resetting to factory settings. I wonder what was the reason in the first place.
-MohitG

Unable to connect to Analysis Services 2012 via SSMS

Hello. We have a fresh install of WS 2012 and SQL Server 2012 Standard. When connecting to Analysis Services with Management Studio, we get the following error:
TITLE: Microsoft SQL Server Management Studio
Error connecting to 'SERVERNAME'.
ADDITIONAL INFORMATION:
Method not found: 'Void Microsoft.AnalysisServices.Server.Connect(System.String, Boolean)'. (ObjectExplorer)
BUTTONS:
OK
Advanced Information shows:
===================================
Error connecting to 'SERVERNAME'.
===================================
Method not found: 'Void Microsoft.AnalysisServices.Server.Connect(System.String, Boolean)'. (ObjectExplorer)
Program Location:
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SupportedServers.IsIMBIServer(SqlOlapConnectionInfoBase connectionInfo)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.SupportedServers.GetHierarchyBuilder(SqlOlapConnectionInfoBase connectionInfo)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetObjectBuilder(SqlOlapConnectionInfoBase ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.BuildDataModel(SqlOlapConnectionInfoBase ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetHierarchy(SqlOlapConnectionInfoBase ci, String displayName)
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ConnectToServer(UIConnectionInfo connectionInfo, IDbConnection liveConnection, Boolean validateConnection)
Database Engine, Reporting Services and Integration Services work fine. Any idea what's wrong with Analysis Services component?

I will reply to myself, that updating the SQL Server with latest updates solved the issue.

Unable to Connect to My Canon Printers via Wifi

Similar Messages

Maybe you are looking for