Unable to connect to N80, after I update Nokia PC ...

Hi all, Today, I updated the Nokia PC suite to version 6.82.22.0. After this, I am no more able to connect to my Nokia Phone. Please help. regards, rv

13-Feb-2007
12:04 PM
patc wrote:
Try a search - this question gets answered every other day .. possibly even more often. You need to: - uninstall all Nokia software via Control Panel - PC Suite - Nokia cable drivers - a.n.other Nokia software - (optionally) run the cleanup tool - (optionally) clean up the registry with regedit - (optionally) remove all Nokia-related directories - download & install the latest version of PC Suite Should fix it.
Excellent. It works after I 'repair' from the control panel. ThanQ very much. best regards, rv

Similar Messages

  • DPM 2012 R2 unable to connect to Database after failed Update Rollup 4 Installation

    We have a DPM 2012 R2 Server with SQL Server 2012 installed locally.
    We tried to install Rollup 4 for DPM 2012 R2 (KB3009516) using Windows Update
    and it failed with error code 0x80070643. Now when we open the DPM Console
    it is totally empty (no Protection Groups, Servers, Disks, just like a fresh install).
    In the eventlog we get a lot of Errors and warnings:
    Event 941 (MSDPM)
    Unable to connect to the DPM database.  Make sure that SQL Server is running and that it is configured correctly.
    Cannot open database "DPMDB" requested by the login. The login failed.
    Event 4209 (MSDPM)
    The description for Event ID 4209 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    DPM Writer encountered an internal error.  Please restart the DPM Writer service, and then try the backup operation again. For additional troubleshooting information, review the application event log and the DPM Troubleshooting Guide.
    Event 107 (Report Server Windows Service (MSSQLSERVER)
    Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
    Event 274 (SQLISService110)
    Microsoft SSIS Service:
    Registry setting specifying configuration file does not exist.
    Attempting to load default config file.
    Then there are some Errors/warnings from SQLSERVERAGENT about failed scheduled Jobs.
    I think the failed Installation changed some database Settings, so that now the DPM Console
    cant access the database anymore.
    I would be happy if someone can help me getting this Server working again!

    Our biggest problem is, that the DPM is not working any more. So there is no chance to backup the SQL Server via DPM.
    I think the main problem is that DPM have no access to the database. Every time I start the DPM Application, I get an error "verify that the DPM service is running on this computer". In the eventlog are many errors that the msdpm service was unable
    to connect to DPM Database. Another "information" is that the user 'nt authority\system' failed to open the database of dpm.
    We've tried to reinstall the DPM but its still the same problem. I suppose that is a corrupt database.
    Tomorrow I try to restore the database and hope it will be the solution of our problem.

  • Unable to Connect to WiFi after iPhone power off; WiFi & internet are working with MBP; common problem, no solutions?

    Here's my setup: Internet <> Comcast/xFinity supplied cable modem <> new Apple Time Capsule <> iPhone 4 & MacBook Pro (see below for hardware details)
    Internet on my iPhone 4 has been acting slow since yesterday evening. My MacBook Pro was running fine, but just to be sure I checked the Comcast website to see that I have only used 50GB of my allotted 250 GB of data for the month, so it's not that.
    I decided it must be a problem with just my iPhone, so I opened up the multitasking bar and quit everything in there manually, and then I held the on/off button, and slid the slider to power off. When I started back up, I could not connect to the same WiFi I had just been using. I tried to reconnect and nothing. I tried to forget the network and try again, nothing. I tried to reset all network settings, nothing.
    I have tried all the steps listed here: http://support.apple.com/kb/TS1398 "iOS: Troubleshooting Wi-Fi networks and connections"
    Toggled WiFi off and back on
    Made sure I am in range of the router (it's about 8 feet away and my iPhone reports full signal from the network)
    Made sure all the hardware is connected and on
    Checked other devices (I'm successfully connected with my MacBook Pro right now)
    Checked for router firmware upgrades (I have a new Time Capsule from Apple with the current 7.5.2 firmware which I've been using for a month)
    Restarted my device (again)
    Checked that the network is available (it does show on my iPhone)
    Restarted my Time Capsule
    Checked my router configuration as described here: http://support.apple.com/kb/TS3727 "Wi-Fi: Unable to connect to an 802.11n Wi-Fi network" which involves simply checking to see that WMM is turned on, also stating that WMM cannot be enabled or disabled for Apple's AirPort products.
    Reset my network settings (again)
    I have searched and searched for fixes to this problem, and I have additionally tried:
    Enabling/disabling Airplane Mode
    Disabling any network password protection/encryption (no luck), re-enabling it (no luck)
    Changing the network password
    Checking for hardware addresses present in iOS Settings > General > About (they are present and not zero'ed out)
    Switching Bluetooth off (nothing) and back on (nothing)
    ....and probably a few other things I can't think of right now
    I have yet to try:
    The "Freezer Trick" which apparently involves chilling the iPhone to get a temporary fix?
    Restoring the iPhone (I would really rather not)
    A different WiFi network (other than my own Time Capsule home network or guest network, both of which give the same Unable to Connect error)
    So, after all of that, are there any more ideas? Is there a reliable solution to this issue? So far I've just seen a lot of "mess with the settings," "the freezer trick worked," and "blame it on the iOS 4 update."
    Here are my hardware details:
    iPhone 4; iOS 5; 32GB; AT&T; no cellular data plan (July 2011)
    TimeCapsule6,113; Firmware 7.5.2; 2TB (September 2011)
    MacBook Pro 3,1; Mac OS X (10.7.2); 2.4 GHz Intel Core 2 Duo; Hi-Res Display; 4GB RAM; 500GB HD (August 2007)
    ...and the Time Capsule config:
    http://cl.ly/BCUt

    Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
    I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
    Jinkies.

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • I am unable to open my itunes after maverick update.  Any suggestions?

    I am unable to open my itunes after maverick update.  Any suggestions?

    Hi there sharonlarks26,
    You may want to try reinstalling the latest version of iTunes. Take a look at the article below for more information.
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/kb/ht2311
    -Griff W.

  • Unable to connect to cluster to retrieve updated CMS member list.

    Hi,
    1.We have total 3 unix servers gesprddwbo01, gesprddwbo02, gesprddwbo03
    2.We have 2 cms running on servers bo01 and bo02 and both of them
    are clustered.bo01 is main server and 02 is clustered
    3.We have shut down server 02.
    4.But when I am trying to login to CMC, I am getting error "Unable to
    connect to cluster to retrieve updated CMS member list."
    I think we need to change clsuter settings since one cms has been
    deleted which was part of clustering.
    ======================================================================
    Below are details of my environment :
    Product : BO XI R2 SP5 FP5.3
    OS : SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V440
    Database : Oracle 10g
    ======================================================================
    Thanks,
    Swapnil Rodge

    search SAP notes for your tomcat clustering or cluster.properties. You need to add your cluster members to the web.xml or the cluster.properties file (some direction is in the web.xml file to follow).
    Regards,
    Tim

  • TS3899 Unable to access E-mail after new update

    Unable to access ER-mail after new update.  Most recomendations delete the account with contacts---any other solutions??

    Contact the email provider to troubleshooting.
    Delete and re-add the account.
    Without any details about the issue there is little to nothing that we fellow users can suggest.

  • Unable to connect to iTunes after iOS 6.0.1 update on iPad 3

    After I updated the other day I can no longer get new apps or update my current apps.  I keep getting a message saying I cannot connect to iTunes. I have tried some solutions that I found (moving the date to 2013 &amp; updating my banking info on iTunes) but nothing works.  I am connected to the Internet (I posted this on my iPad).  Any solutions out there or do I need to call apple?

    You can try these suggestions and see if any work for you. The first one is definitely an iOS 6 only suggestion.
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.
    Even though you are connected to the Internet, it might help if you reboot your router anyway. Unplug it for about 30 seconds and thenlug it in again.

  • Unable to load some websites after an update to IOS6

    I am unable to load some websites in both Safari and Google Chrome. This did not bother me until I found at that I cannot access some websites I can access before and frequent. I am unsure if this was caused by the update to ios6, but this incident only happened after the update. I am unsure as well if this is related to the problem of me unable to connect to itunes and app store after the update. I've fixed those by changing my DNS to 8.8.8.8 and changing the time trick. I've also noticed that twitter and some apps crashed a lot. I have no problem connecting to the wifi though. Thank you in advance.  

    Some additional details I have also noticed. Some images will not show or appears as a blue and white question mark in some websites. Even here in apple website.

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't connect to WRT54G after firmware update

    I just tried to update the firmware on my WRT54G (version 8.0) and have not been able to connect to the router since then. The firmware said that it had been updated successfully, however I have been unable to connect since it reset itself, and the Ethernet and Internet LEDs are all constantly on even though nothing is connected (the power light on the other hand is behaving normally, not blinking or anything). I have tried resetting the router by holding down the reset button for 30 seconds, but this does not change anything, the router still cannot even be pinged. If anyone can give me any help at all with this, it will be very much appriciated. Thanks.

    It sounds like the router might already be dead.  But there is always hope that you might be able to revive it.
    You need to try again to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Can't connect to wifi after IOS update.  Do you know a solution?

    Loaded the new update and now it is sporatic connections with the wi fi.  I have unplugged the router and all that, still no luck.  It will work normally very briefly, but only briefly after I unplug the router, etc.
    Do any of you have a solution to fix this?
    Thank you!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to connect to Internet after Secruity Upgrade - Any Suggestions?

    Like several of the previous posts I am unable to connect to the internet. The affected computer is a G3 iMac. It is connected to a Linksys wireless access point. The Linksys wireless router is connected to my cable modem. I get a message that the Built-in Ethernet is active but: Built-in Ethernet has a self assigned IP address and you may not be able to connect to the internet. No combination of changes to the settings has had any effect. I also have tried all of the fixes in the previous posts. None of them have worked. I am not experiencing any connectivity problems with my other computers (2 PCs and 1 Macbook). Everything worked fine until that danged "security upgrade"!
    Mac and PC   Mac OS X (10.3.9)   Win XP Pro

    Visit http://www.macfixit.com/ where the have been
    running articles on how to solve problems arising
    from the security update.
    Thank you for the link to MacFixIt. I found what I needed to correct the problem, although all of the fixes referenced computers with the AirPort card and software. I found that removing the extensions AppleAirPort2.kext and AppleAirPortFW.kext solved the problem. Everything seems to be working properly after a restart last night and an overnight shutdown.

  • I cannot connect to iTunes after new update on iPad air

    I Cannot connect to iTunes or App Store after new update and I have tried all the trouble shooting stuff....no good. When I close the app the contents are there but when I tap on them the error message comes up and the app contents goes blank....Help. I need them for my business.
    thanks

    Hello Deryn340,
    Thanks for using Apple Support Communities.
    If you're currently unable to connect to either the iTunes Store or the App Store on your iPad, then I'd like you to please follow the troubleshooting steps outlined below.
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time. 
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    If the steps above didn't resolve your issue, be sure that your specific alert isn't listed as a possible iTunes Store error. Then, if your issue is still unresolved, follow these steps.
    Can't connect to the iTunes Store - Apple Support
    Cheers,
    Alex H.

  • Cant connect to internet after ios6 update

    cant connect to internet after ios6 update

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for