Unable to connect to net through pc suite

hi guys,
I am unable to connect to net on my pc through pc suite after i upgraded it to the latest version. It just displays after trying for few seconds as data pack not availiable.. I even tried with a different model n diff network.. Still does't work.. Any solutions? My model c3-00

Not very scientific but you could always revert to an earlier version as here: http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/How-to-use-Nokia-N8-with-PC-Suite-7-...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Nokia c5 unable to connect with pc in pc suite mod...

nokia c5 is unable to connect with computer via pc suite mode but it get connected via mass storage mode . So i am unable to connect internet in my pc through my mobile. Whenever i m connecting my mobile , hardware installer of computer can't install my mobile due to code 39 shown in Computer.

is your pc with ovisuite? Try with pcsuite

Unable to Connect to SAP through SAPGUI

Dear all,
We have a PI 7.11 dual stac ksystem on Linux, oracle.
we are able to connect to the server through putty, but not able to launch xmanager as it is sayign XDMCP error....
Also unable to connect to SAP through SAP GUI
we are getting wsaewouldblock resource temporarily unavailable
I am connecting to servers through CISCO VPN......
Thanks,
Murali L.

[root@PIPROD work]# ps -ef | grep dw
pipadm    2042 23763 0 19:34 ?        00:00:01 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
root      8373 6880 0 19:52 pts/1    00:00:00 grep dw
gdm      17480 17397 0 15:48 ?        00:00:00 /usr/libexec/gdmgreeter --gtk-module=gail:atk-bridge:/usr/lib64/gtk-2.0/modules/libkeymouselistener:/usr/lib64/gtk-2.0/modules/libdwellmouselistener
pipadm   23763 23690 0 17:28 ?        00:00:00 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23777 23763 0 17:28 ?        00:00:08 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23778 23763 0 17:28 ?        00:00:05 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23781 23763 0 17:28 ?        00:00:10 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23783 23763 0 17:28 ?        00:00:04 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23786 23763 0 17:28 ?        00:00:03 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr1
(23762) New Child Process created.
(23762) Starting local Command:
Command: ms.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr2
(23763) New Child Process created.
(23763) Starting local Command:
Command: dw.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
Thu Oct 20 17:28:21 2011
DpVmcInit: initialize vmc
DpVmcInit: vm lib loaded
DpVmcInit: vm linked with kernel
DpVmcInit: vm native libs loaded
ICM up and operational (pid: 23775) ***
[root@PIPROD work]# more stderr3
(23764) New Child Process created.
(23764) Starting local Command:
Command: ig.sapPIP_DVEBMGS00
           -mode=profile
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
NiInit3: NI already initialized; param 'maxHandles' ignored (init=1;par=202;cur=2048)
***LOG Q0I=> NiPConnect2: 172.28.30.45:3300: connect (111: Connection refused) [nixxi.cpp 3142]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 172.28.30.45:3300) [nixxi.cpp    3142]
[root@PIPROD work]# more dev_ms
trc file: "dev_ms.new", trc level: 1, release: "711"
[Thr 47613442779232] Thu Oct 20 17:28:21 2011
[Thr 47613442779232] ms/http_max_clients = 500 -> 500
[Thr 47613442779232] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   390 (AMD/Intel x86_64 with Linux)
relno      7110
patchlevel 0
patchno    81
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
pid        23762
[Thr 47613442779232] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 23762) [msxxserv_mt. 2174]
[Thr 47613442779232] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47613442779232] load acl file = /usr/sap/PIP/SYS/global/ms_acl_info
[Thr 47613442779232] MsGetOwnIpAddr: my host addresses are :
[Thr 47613442779232]   1 : [172.28.30.45] PIPROD (HOSTNAME)
[Thr 47613442779232]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 47613442779232] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp 527]
[Thr 47613442779232]   3 : [192.168.122.1] 192.168.122.1 (NILIST)
[Thr 47613442779232] MsHttpInit: full qualified hostname = PIPROD
[Thr 47613442779232] HTTP logging is switch off
[Thr 47613442779232] set HTTP state to LISTEN
[Thr 47613442779232] *** I listen to port sapmsPIP (3600) ***
[Thr 47613442779232] *** I listen to internal port 3900 (3900) ***
[Thr 47613442779232] *** HTTP port 8100 state LISTEN ***
[Thr 47613442779232] CUSTOMER KEY: >Z2073759310<
[Thr 47613442779232] build version=711.2009.08.31
[Thr 47613442779232] Thu Oct 20 17:28:35 2011
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
Edited by: Murali Lakkoju on Oct 20, 2011 4:14 PM

I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

I am unable to connect to internet through my TATA PHOTON + ZTE device.
Please help.

https://discussions.apple.com/thread/3680625?tstart=30
Best.

Unable to connect Nokia X6 to Ovi Suite

I have installed Nokia Ovi Suite on my pc (Windows 7) but when I try to connect my Nokia X6 I keep getting this message
Device Driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
MTP USB Device - failed
I have tried uninstalling / reinstalling Ovi Suite but no joy. Annoying thing is that I can connect to Ovi Suite on the netbook ok but not the new all singing all dancing main pc!
Would appreciate any help with this as I am unable to connect my phone to Ovi Suite - thanks

Uninstall Nokia Connectivity Cable driver thru' Windows Control Panel and reboot both PC and Phone.. Then connect again and wait for the Drivers to install. Make sure the PC is connected to internet to enable download of the latest drivers if required...

Unable to connect to Netflix through Apple TV (ATV-ui62)

I can connect to Netflix through my iMac but unable to connect via ATV, any suggestions? I've done both hard and soft resets of ATV to no avail and rebooted router. I have a 3rd Generation ATV.

I have the same issue, but I'm not using a VPN. I can also watch netflix on my Macbook Pro or on my iPad Air. If I try to Airplay netflix from my iPad to the AppleTV (2d gen) it will pop up a message saying an error has occurred, I can though, Airplay through my Macbook but only because I'm using the browser to stream the Netflix content.
Maybe it is the Geographical thing.
Any help is appreciated.

I'm unable to connect to facebook through my iphone...

Sudenly when I try to access my facebook account, appear a notification that said: Login failed... unable to connect to facebook, please try again later"... but i can access my fb account through my laptop, so the problem is not facebook... How can I fix this?

i have a same problem with Larrymonge,
kelliebxxx , aaron :
Maybe i can help you , go to your facebook from computer
and click account > account setting, click applications, search " Facebook for iPhone " maybe on your list
if you have a " facebook for iphone " on your list, remove it , and try to login through your iphone . that should be work, like i'm failed to login via my blackberry .
sorry i can't help for those people who not have " Facebook for iPhone " on their application list .
i hope it's help . thanks

Unable To Connect To Oracle through forms

Hi All
I have loaded forms 6i and unable to connect to database.
error:ora:12154 tns no listener
this is the problem i am facing currently
1. i reconfigured the listener and got the test sucessful in my net manager and net configuration assistant.
2.i checked out in the services also
3.i loaded forms in a different drive other than where oracle home directory exists.so i checked out with the tns names.ora file and it is also there in the forms directory.
As i feel this as a peculiar problem.pls do suggest reg the same
Thanks in advance
Sasidhar.p

Apply this command at the command line to know if the listener service is started:
lsnrctl status
Joel PÃ©rez
http://www.oracle.com/technology/experts

Unable to connect to net

Hello
I am having a cable internet connection.
How to connect to net from my Nokia 5800. I am using win xp.

What are your settings in Outlook? What is the ISP for the other network(s) you are connecting to?
Most major ISPs block port 25 for SMTP connections that aren't their own. Try switching the port to 587 and see if that helps.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Unable to connect to SAP Through LAN

I have installed a new BIW server but i am unable to connect to that sap server thru LAN.
Let me give the IP range of the servers
DEV - 90.0.0.*
PRD - 90.0.0.*
BIW DEV - 90.0.0.* (New BIW server which i am unable to connect)
i am able to connect to DEV and PRD from BIW DEV server. but not vice versa
I tried to ping the BIW IP Address from router machine and i am able to ping.
We have a Router machine. I don't know if i have to add any entry in routtab. I already have p*** in routtab.
Also i am unable to connect to biw dev using router string from external network but able to connect to DEV and PRD.
It will be great if anyone give suggesion to resolve this Issue.
Regards
Prakash

Thanks for your reply!!
According to the instructions mention in the link, i ran the test everything was fine..
i ran the self test and i got self test OK.
In the biw server Host file i mentioned the IP address and host name of the biw server and DEV and PRD.
Still unable to connect to BIW Server thru LAN.
when i tried saprouter -r command in the router machine, it gives this error
"routab cannot open './saproutab': EXIT PROGRAM!!!
<running without saproutab is no longer supported for security reasons>
Could not open permission table"
Please guide me what else can be done.
Thanks
Regards
Prakash
Edited by: Praxbasis on Aug 12, 2009 7:19 PM

Unable to connect to Internet through KRZR - please assist

Hi folks.
I have paired my KRZR K1 to my Macbook. In order for me to use bluetooth and connect to internet on the Macbook I need to input some info on the Macbook. Through reading he different forums I have inputted the following info:
Tel #: WAP.CINGULAR
ACCT Name [email protected]
Password CINGULAR1
I then try to connect and gives me an Internet Connect error box on my Macbook that says, "A modem error occurred. Please verify your settings and try again."
I have a Media Net plan with unlimited data as part of the plan.
What am I doing wrong?
Also when I first paired the phone to the Macbook in the final step it asked for a CID but I left it black. Is that my problem? Was I supposed to put something in there? Should I re-pair with any other specific information to get this to work?
Your help is greatly appreciated!
Jason

thanks!

Unable to connect to internet through Wi-Fi or Bluetooth

It seems like Sept 9, 2012 at 1:07AM was the last known time at which my ipad connected to the Internet eother through known wi-fi networks - two at work and one at home. I also tether my iphone (through ATT's network) to my ipad. I am also unable to do that as well. My Mac and iphone connect to all these networks without difficulty. I followed troubleshooting instructions on Apple troubleshooting page to no avail. Basically the ipad is useless to me without the internet. I am not going to update or reconfigure the routers at home or work because all the other computers, my daughter's and husband's work fine. It's just the ipad that has stopped communication with the outer world.

Yes but not to app world, just turn on wifi and set up
Pearl 9105 6.0 Bundle 2950
Playbook 2.1.0.1032

Unable to connect to network through repeater

Hi
I Cannot join network through the wireless repeater. My Iphone 4 works fine next to the router but when I walk downstairs it disconnects. It can 'see' the repeater as the signal goes to full before disconnecting. I have tried resetting networks ect but this does not help. Everytime I put the password in it says 'unable to join network' but works fine if I go near the main router or switch the repeater off.
It used to work fine untill I got sky on demand. when I connected this through the repeater it seems to have kicked my phone out?? i have since removed the on demand but still cant get my iphone to work. My girlfriends Galaxy also doesn't get signal through the repeater either. Any help please

Hi,
1 ) try to configure smartview using xml file as source of connection:
<?xml version="1.0" encoding="UTF-8"?>
<res_GetProvisionedDataSources>
<Product id="Oracle ESSBASE " name="APS-11.1.2" displayVersion="11.1.2.3.0">
<Server name="Oracle ESSBASE " context="http://your_aps_server:19443/aps/SmartView"></Server>
</Product>
<Product id="HP" name="HP-11.1.2" displayVersion="11.1.2.3.000">
<Server name="Oracle Hyperion Planning, Fusion Edition" context="http://your_aps_server:19443/HyperionPlanning/SmartView"></Server>
</Product>
<Product id="RAFramework" name="RAFramework-11.1.2" displayVersion="11.1.2.3.000">
<Server name="Reporting and Analysis Framework " context="http://your_aps_server:19443/raframework/browse/listXML"></Server>
</Product>
<sso></sso>
</res_GetProvisionedDataSources>
2) You can change EssbasCluster-1 server address using epmsys_registry
cd C:\Oracle\Middleware\user_projects\epmsystem1\bin\
call epmsys_registry updateproperty #"Analytic Servers:EssbaseCluster-1:1.ESB"/@host address_essbase_server
run this command for all EssbaseCluster-1 components
3) Try to add provider server in EAS console
4) And check telnet from APS Server to essbase server port 1423

HT4623 Why am I unable to connect to Facebook through Hayday since updating to version IOS 7.1.1?

Why am I u a able to connect to Facebook on IPad and through Hayday since updating IPad to IOS 7.1.1?

try the instruction from the app developer
http://forum.supercell.net/showthread.php/7624-How-to-setup-a-new-device-with-yo ur-farm-or-recover-your-farm

Unable to connect using Net service name

I'm running 10.2.0.3 on a RHEL 4 box. I am able to connect to Oracle locally using :
sqlplus username
however, if i try to login using:
sqlplus username@SID, i get this error message:
================================
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
==================================
My sqlnet.ora file looks like this:
=======================
SQLNET.AUTHENTICATION_SERVICES=(NONE)
NAMES.DEFAULT_DOMAIN = world
NAMES.DIRECTORY_PATH=(TNSNAMES)
=============================
and my tnsnames.ora file looks like this:
===========================
testsid.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.2.3.4)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = testsid)
==================================
i ran TNSPING on the box, and that returns a success code, so I'm not really sure what I'm missing here. Any help would be greatly appreciated.

Peculiar.
When you show yourself logging on to an instance, wouldn't it be a good idea to then demonstrate that you've actually connected to the right instance? Instead, you do a mere count from a table. Why not, instead, do a select instance_name, status from v$instance? Then we would indeed know that an instance called TESTSID is running and that its status is OPEN. Without that, your statement that "this is how I know the database is up" is really just a faith-based proposition. The statement you show simply tells us AN instance is up: it doesn't tell us WHICH one, though (and your lsnrctl status feedback makes it clear more than one is running).
Your output from tnsping is largely irrelevant, too. TNSPING tells you whether your client can talk to a listener, and that's it. It says nothing at all about whether the instance you're trying to reach is up, down or otherwise engaged.
A better command to diagnose these sorts of things, incidentally, is lsnrctl services, because it's a service you are ultimately trying to connect to, so seeing what services your listener is aware of is more useful than knowing the status of the listener.
Anyway: your listener has been configured statically to listen for two instances (PBDPASSM and TESTSID). "Configuring statically" means simply that your listener.ora will have a SID_LIST section in which both those services are listed as things the listener should be listening for. Because they're in the SID_LIST, that's why those services are listed in your lsnrctl status report -and that's also why they're listed as status UNKNOWN.
If the instances were actually running, and unless you've set the LOCAL_LISTENER parameter in the init.ora for each instance to something weird, you would **also** see each service listed as 'Ready', because each instance's PMON background process would be registering the existence of its instance dynamically and actively with the listener. It's not saying, "Please listen for this but I don't know if it's running or not" but "here I am and I want you to listen on my behalf". So the listener does know its status at that point, and hence records it as 'ready'.
The fact that you don't have any statuses of 'ready' means the instances aren't running or they are running but unable to register with the listener (perhaps because LOCAL_LISTENER is directing them to some other listener running on another port). But if dynamic registration was not working for that reason, static registration would still be fine for the purposes of making connections if the instance was actually up. Which again raises the question of which one you managed to connect to when you did the sqlplus / as sysdba in your test.
I don't believe the case of anything is the issue here, by the way: your listener reports "testsid" and your SERVICE_NAME is asking for a connection to "testsid", so I see no problem there. It would be different if one said 'TESTSID' and the other 'testsid', but that's not what's happening.
I'd like to see the output of a ps -ef | grep PMON for this host. I'd also like to see the results of a select instance_name, status from v$instance when you do your test connection. And I'd finally like to see the output of show parameter local_listener.

Unable to connect to net through pc suite

Similar Messages

Maybe you are looking for