Unable to Connect to Network Printer

Hi,
I am trying to install Samsung ML-1640 through my wireless router's print server feature but its not working. Whereas I am able to print through my Windows PC's on the network with no issues.
On giving print command the print job is getting paused around 40-50% in the print que and not printing. Neither the printer is getting pinged through Network Utility.
The printer is work fine with my MBP 13' when attached directly through its USB port.
1) Have tried deleting & re-adding the printer through its IP with all the three different protocols LPD, IPP & HP JetDirect.
2) Have updated to the latest drivers from here: http://support.apple.com/kb/DL905
3) Also, have gone through the troubleshooting steps given in this article: http://support.apple.com/kb/PH11070

Tried with your suggested steps but no luck. First I just added IP address of the router (192.168.1.1) with IPP as protocol, it did not print. Here's the error log from Print Queue for your reference;
E [14/Feb/2013:13:03:10 +0530] [Job 1] Unable to queue job for destination "ipp://abc-macbook-pro.home/printers/Samsung_ML_1640".
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-state-reasons attribute.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Cancel-Job operation.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Validate-Job operation.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED job-id attribute.
Then, added the printer with 192.168.1.1:631 as IP address and again no luck. Here's the error log;
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-state-reasons attribute.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Cancel-Job operation.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Validate-Job operation.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED job-id attribute.

Similar Messages

  • Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server.

    Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message  Can't install the software because it is not currently available from the Software Update server. Please help.

    Installing an HP network printer

  • HP Device Toolbox software Error Unable to connect to the printer

    Hi guys,
    I'm currently in bit of a nightmare with my HP Laserjet 100 color MFP M175nw. 
    Basically I have upgraded to a new wireless router and since doing this my HP Laser Jet refuses to work / connect to the wireless network.
    I have literally tried just about evey thing I can to get it to work, thoroughly through the manual, uninstalled and reinstalled the software about 12 times, tried firewalls on and off, tried security on the router on and off, tried WPS mode, tried manually entering in the IP address into the printer all without luck. You can see my dedicated thread here
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-LaserJet-Pro-100-color-MFP-M175nw-un...
    So currently I have the printer connect to the computer via USB and it works, so I decided to try using the HP Device toolbox software  to see if it would give me any more options to try and when I run this software I get
    Error: Unable to connect to the printer, make sure your printer is properly connected and powered on and then try to open the HP device toolbox again. Arg!!!
    My new router is a Billion 7800DXL, my old router which worked in wireless mode was also a Billion 7300g.
    Any help would be great really stuck here

    Hello tf22raptor.
    I see that you're now experiencing an issue getting the Device Tool box to run. I will try and assist with this.
    After reviewing this post and the other thread, I have a few things you can try.
    1) Run MS Fix it utility to uninstall the software: Fix problems that programs cannot be installed or uninstalled.
    (This is to make sure the software is completely removed and conflicts in the registry get resolved)
    2)Msconfig: press windows key and R on the keyboard> in run box type "msconfig"> on window select "services tab"> check box next to "hide all MS services> press disable all> go to "startup" tab> press disable all> press apply and ok at the bottom> this should prompt a PC restart.
    Please restart.
    3) Re-install via USB
    4) Try running the device toolbox now
    5)If still having issues installing wireless, you may have to contact the router manufacture.
    I hope this helps you out. Thanks for posting on the HP Forums.
    I worked on behalf of HP.

  • Cannot connect to network printer: Canon MX330 series

    Hello,
    Not sure if this issue has been posted before, if so then please forgive me. I recently purchased my first Mac, a Macbook pro running on Mac OS X 10.6.6.
    I have a network printer, a Canon MX330, at home that is connected to the family desktop computer, a PC on Windows XP.
    When I connect my printer to the USB on my Macbook, it works instantly and I can print a test page. I can also go on my Desktop PC and print on that printer through the network.
    The problem arises when I connect my printer to my desktop PC. The Macbook is unable to connect to the printer. However, I can browse my Desktop's shared folders from my Macbook. The printer also works locally on the Desktop as well as from the other PC's that are on the network, but not on the Macbook.
    If anyone can please help, that would be really appreciated. Right now I have no choice but to copy my files to the public shared folder, then go upstairs to the Desktop, open them, and print.
    Thanks!
    Phil

    Hi Phil,
    What they have described is the correct procedure for adding a Windows shared printer to the Mac. Given that you can connect to the shared folder on the PC then this process should work but can take some time.
    The first thing to ensure is that the printer on the XP PC is shared. In Printers & Faxes on XP, right-click the printer icon and select Sharing. Select 'Share this printer' and set the Share Name to a single name (spaces can impact things). OK this to close the driver properties window.
    With regards to the three columns that appear, the first column is for the workgroup name. If you are using XP Professional then the name will be Workgroup. The Home version will show MSHome. This workgroup name can take a while to appear (the Mac needs to determine who is the master browser on the network) but you can help the Mac by opening System Preferences > Network and for the connection type you are using (Airport or Ethernet) select it and then select the Advanced button. With this new view you will see the WINS tab. Select this and you will see the Mac's workgroup name and the workgroup it belongs to, which will most likely be blank. Click the drop menu and the workgroup name will show. Select this name and OK the change.
    Now try adding the printer again, selecting the Windows icon. The workgroup name of XP PC should show in the first column. If it does, select it and then second column will show the XP computer name. Select this and you should get prompted to enter the admin user details for XP. After entering the correct information the shared printer name will appear. Select this and then you can progress to selecting the PrintFab MX330 driver.

  • Unable to Connect Wirelessly to Printer

    Hi all.
    Since I had my BT Infinity installed I am unable to connect to my printer Wirelessly like I had previous. I have an Epson SX600FW Inkjet All-in-One Printer. I have the BT Homehub 2.0. How do you configure this hub/router for the Wireless Printer? I cannot see any way of doing this?
    Out of desperation, I have even tried to attach my old Router to the Homehub (even replace the BT Hub with it) but got nothing at all. Not even internet connection!
    Can anyone help?
    BT Infinity (Option 2/Unlimited) - BT Telephone (Unlimited 24/7 calls) - BT Vision (The Whole Lot! inc Sky Sports & ESPN)
    Solved!
    Go to Solution.

    rdec1945 wrote:
    Infinity installed yesterday. Works perfectly both with laptop and Wi Fi Blue Ray DVD but will not work with printer which is an Epson Stylus SX425W. I have set up printer ok to run on Wi Fi but it will not print and I keep getting error messages. Spoken to Epson who have been thro the set up, confirmed that all is ok and asked me to print a status check. This says that network is working correctly but "A router/access point channel conflict has been detected". According to Epson, the solution is for the BT Hub to be configured so that it allows any Epson product through it's firewalls, and for MAC address filtering to be turned off. This is out of my league - is there anyone out there who recognises this issue and can help?   
    Hi rdec1945
    I dont use that printer but the epson PX710W.
    Have you used the printers on screen menu.
    Setup
    OK
    Network Settings
    OK
    Wireless setup wizard  or even Advanced setup and then WPS Wireless LAN setup, where you use the WPS button on the side of the HH3.
    Setting up mine did not involve opening any thing in the firewall or doing anything with MAC address filtering.
    [edit] have a look at this post from geaves, again not the same printer but suggests setting it up with ethernet first, I think its post 6.
    http://community.bt.com/t5/Other-BB-Queries/Cant-get-wireless-printer-working-with-Home-Hub-3/m-p/29...
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n.  It is a network printer. Not Wireless.

    How do I connect a network printer to ipad 3. I have a wireless router on my LAN.  I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN.  The printer is not on the AirPrint list. The printer is not wireless.

    Hello,
    I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes. 
    Thanks!

  • Imac FaceTime unable to connect to network (safari connected and loading pages).

    I have a brand new Imac, I have never been able to get facetime to work. It keeps getting hung up on the log in page, and eventually gives me an error message of unable to connect to network. Safari and other web based programs are working perfectly. 
    Any Ideas?

    How can I get my Mac to join an open 3Com wireless
    network? The network is recognised but Mac is unable
    to connect...
    The 3Com wireless router is connected to a broadband
    router through a PC running XP.
    Do you have two routers? That may be your issue. You should only be using one router, or configure one of the routers and turn of DHCP.

  • I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
    A1409 Gen 4.. The new AC is A1470
    How is it setup?
    I need the whole network setup. what modem/router, how is the TC connected etc??
    I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

  • Ipod "unable to connect to network"

    i have an ipod4, and i'm only unable to connect to my home router, my friend's ipod connects to it fine, but mine is having problems, i have reset network settings, turned off sercuity on router and was still unable to connect, i have gone into router and opened mac address too but still wont let me connect, any suggestions

    I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

  • Unable to connect to network ios 7

    Tried Reset Network Settings with airpalne mode on and with it off. Reset router. Updated router to latest firmware. Still unable to connect to network.

    Hi there casefromab,
    it sounds like you have already tried a few things, but you may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • NOKIA N8 - Unable to connect - WLAN Network not fo...

    also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

    Well, I seem to have issues with WLAN as well.
    When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
    So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
    Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
    P.S.: Tthere is another thread reporting similar problems. Here is the link.

  • Unable to Connect to Network error with right code

    My Ipod Touch 4G just started having a problem a few days ago i left my house and reset my network settings because i wanted to see something not thinkign about when i got home and now any time i try to connect to it i ge the unable to connect to network error. My friends and family are all using there ipods on our network and they still work and ive tried everything ive updated reset network setting restored the ipod any suggestions on how to fix this?

    - Did you power off and then back on the router?
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    AmishCake wrote:
    Have you tried restoring your softwareyes
    yes I have

  • Unable to connect via wireless, printer is online.

    I am using a Photosmart plus 209a via wireless.  There are 3 notebooks connected. 2 will print but my Dell Studio (Win 7 Pro) will not. It was previously connected but now unable to connect.  I have uninstalled all components using level 3 twice. Have used the Print/Scan tool.  Downloaded the full SW package and the Basic driver SW. I process a job and it gets to the spooler and then "print job failed".  I can view the control panel via IP address. I can view network settings and print wireless test page through HP Solution Center.  Why am I unable to connect?  I was able to use via USB but this is not an option.

    It sounds like there is something different on the Dell Studio since it works from two other computers on the same network as the Dell Studio.  It also sounds like you are able to access the EWS of the printer by using its IP address.
    Are there any other errors messages regarding the printer?  If so, what are they?
    Is there a third party firewall installed (e.g. Norton, Kasperksy, BitDefender, etc.)?
    Is this Windows 7 Professional 32bit or 64bit?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Single Sign-On

    Does anyone know of a simple solution to allow SSO between Weblogic and an IIS-ASP website? Basically I just want a link in the Weblogic website that takes you into the ASP website without the user logging in again. Thanks.

  • How do I change the text size in a PDF fillable form in Preview?

    I'm trying to fill out a PDF form I downloaded from my bank and would like to use Preview to fill out the form. No problem typing in each field until I got to where it asks for my e-mail address. My e-mail is too long for the form's provided area and

  • IPhoto 6 and HP Photosmart A640

    I purchased an HP Photosmart A640 photo printer yesterday and I am having trouble getting photos to print directly from iPhoto (I'm running iPhoto 6). I got the printer to connect to my MacBook Pro with bluetooth, and I also have it plugged in via US

  • Oracle 10.2.0.4 to 11.2.0.2 fails with ORA-03113

    This is Oracle upgrade from 10.2.0.2 to Oracle 11.2   (on Windows platform) Since 10202 to 11 is not SAP supported, we upgrade from 10.2.0.4 first before upgrade to 11 10202 to 10204 upgrade finished fine.  All post upgrade sql files are run without

  • Employee salary details report

    dear abaper ,                      please send a HR report in which employee salary details are given.                                                        Thank you sir. Moderator Message: Warned many times. UserID sent for deletion. Edited by: ki