Unable to connect to Nike+ website via iTunes

Just got my Nike+ stuff in today, and it won't let me connect to the site when it asks me to login to my Nike+ account via iTunes and connect to the Nike+ site.
When I go to login, I get an error saying I don't have an internet connection (although I'm on cable).
When I go to create a new account, it says it can't connect to the host site.
Any ideas? Anyone else run into this issue? I've made sure I have the latest software for iPod and latest version of iTunes already.

Are you using your apple login as your Nikeplus login? I was having the same problem as you. Our iTunes/ipods are listed under my husbands email but I registered with nikeplus with my own email address. It kept telling me that my nikeplus username/password were incorrect but I could login to the nikeplus site without a problem. I created a new nikeplus account with my husbands email address and iTunes connected just fine.
Of course, now I am upset that I am being forced to use the nikeplus site under my husbands email address.

Similar Messages

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

An automated update has rendered my laptop Firefox browser unable to connect to any websites, how do I fix this issue?

When the update for my browser took place, on 5/5/14 @ approximately 12:15 am, it rendered the browser unable to connect to any websites. It does work in safe mode, but not in regular mode. I am on an hp pavilion dv7, running windows 7. I need to resolve this issue ASAP. Or I will have to switch browsers, which I don't want to do, as I have used Firefox for many years. Can I get some assistance to rectify the problem?

Can you start by giving us the troubleshooting information from the Firefox installation that's having problems. This is an essential step in troubleshooting.<br>
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the sub-menu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.

Curve 9380 unable to connect to the internet via wifi

I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

Unable to connect to the CDDB using iTunes 10.6.1.

When I put my CD in and try to get the track names, I get this error:
Unable to connect to the CDDB server. the network cannot be reached.
The internet is fine, I checked the firewall and I unistalled/ reinstalled iTunes, but this error keeps popping up.
I was able to connect late week and retrieve track names, but yesterday and today the same error. Any suggestions?

I have same problem but I am on a PC. Everytime I try to get track names I get the CDDB server error. I have an interenet connection and can upgrade itunes (which seems to me that the application knows I have an internet connection) but I continue to have problems with track names and it seems artwork as well.

When open Firefox 8, says 'Unable to connect' and no websites work. Internet connection is fine. Please help :(

My Firefox automatically updated to Firefox 8. Since doing so, when I open the browser the screen displays a box saying 'Unable to connect' and says the same for any website. My internet connection is fine. I uninstalled and installed Firefox again, but problem persists. Please help as this is really frustrating me :(

Did you try this?
'''Remove Firefox from your program's list of trusted or recognized programs, then add it back.'''
Some Firewalls don't specify which version of Firefox is permitted. <br />New version of Firefox = new executable was installed = new permission is needed
The top 12 ways to get fooled by Firewalls: <br />
http://forums.mozillazine.org/viewtopic.php?p=2295421#p2295421

OD users unable to connect to a server via afp

We have a Mac OS 10.9.2 with Server 3.1.2. We are able to access the server for file sharing via smb with OD accounts just fine. But we are unable to connect to the server using afp with any OD account, only local system accounts. I have tried turning off SMB for all of the file shares, but this did not help resolve the issue.
The log shows a login attempt immediately followed by a logout.
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Login -----" -5023 0 0
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Logout -----" -5023 0 0
I did edit out the user and the server name.
Any help would be greatly appreciated.
Thank you.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

Unable to connect to app store and iTunes store

so i was just casually browsinh the app store and downloading free apps when the app store suddenly stopped working
it could not search but it shows the top rated apps
and after a few minutes a message pops up saying "unable to connect to app store"
i tried to use iTunes and it also did not work and showed a similar message "unable to connect to iTunes store"
p.s. i will not update

Everthing works now after 20 minutes
iTunes store was probably down even though it indicates green for up

Unable to connect my ipod touch to itunes after updating to ios 5

After i have finish updating my ipod touch 4th generation, to ios5 , my ipod was unable to connect to the itunes and all the apps and song are all missing from my ipod touch
when i open my itunes it also say iTunes could not connect to this iphone because an unknown error occured (0xE8000065)
Please help me thank you

See this Apple support document related to your issue.
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
B-rock

HT201413 ■Unable to connect to, purchase, or download iTunes Store content

I just updated my ios from 4 to 6. Now I can't download an app from Apple indicating unable to connect to Itunes stores

I have the same issue, for the past 2 weeks. "we could not complete your iTunes store request, iTunes store temporary unavailable" I have found some old 2010 blogs about this issue but nothing has been resolved. I have tried all the suggestions through the apple site and nothing. I have tired to fix it through Norton and nothing.. I have emailed apple with all the diagnistic info i could.. so now i wait.

N70 unable to connect phone to compter via USB hel...

Brand spanking new N70, downloaded PC suite however not able to connect phone to compter via USB to transfer music. Can anybody help?

Hi bento
When you install PC Suite for first time there are TWO seperate processes, firstly installing PC Suite then returns to desktop and then secondly establishing connectivity during which "Nokia Connectivity Cable Driver" and "PC Connectivity Solution" installed.
You could go to Setings > Control Panel > Add/Remove Programs > Repair and see if this helps
Happy to have helped forum in a small way with a Support Ratio = 37.0

My browser's are 'unable to connect' to some websites after upgrading to mavericks.

the message i get is:
Unable to connect
Firefox can't establish a connection to the server at www.adobe.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
this is happening on reliable sites such as www.adobe.com, however, there are other sites that also won't load such as (http://www.adobe.com/products/reader.html), and though it seems specific to adobe. i had a friend try going to the adobe site on a different machine running osx 10.6 and they could load the page fine. i tried firefox and safari and neither will load the page.
i'm running:
os x 10.9.2
processor- 3.06 GHz Intel Core 2 Duo
memory- 8 GB 1067 MHz DDR3
thanks,
rick

You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Back up all data.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Unable to connect to PC Suit via bluetooth

I Have a Noia 6233 And IVT Bluesoil Bluetooth dongle installed on Windows XP pro SP 2.
When I am trying to connect to PC suit via bluetooth i gets a warning "cannot use connection type. Check that all needed hardware, software, and drivers are available" When I have checked system information through - help- about nokia pc suit I found detecetd bluetooth stacks as - Microsoft (Version: 5.1.2600, Build: 2180)only
I have nokia PC Suit 7.0.9.2 and blue soil version 1.6.1.4 release 050606 and stack version 05.04.05.20050408.
Plz Help me me to get out of this trouble asap.

I have the same issue.
I'm trying to use PC suite (downloaded from nokia site as the proper one for 6230i rel 7) connecting 6230i via bluetooth. Pc and phone are "associated" but when i launch the PC suite I get an error message: "It is not possible to recognize the phone".
I read a lot of post but nobody seems to have solved the issue!
From Bluetooth application I can read files on pc ... so che bluetooth connection seems to work properly; it appears as a PC suite bug .. really boring!
Nokia team can help us ?

For the last 2 days I have been unable to connect to the AppStore or iTunes via either my iPhone/iPad or MacBook over wifi.

I have spoken to my ISP (Sky) and they haven't got a clue.
I cannot connect to iTunes/AppStore on any of my 3 devices (iPhone/iPad/MacBook) when connected to my home broadband yet I have no issues over 3G on my iPhone.
I also cannot play YouTube videos on iPhone/iPad via the app or the website but have no issues on my MacBook. I have done all of the usual things like rebooted devices, reset network setting and all settings. I would restore but that isn't going to go so well if my MacBook won't talk to iTunes is it?
In all my years I have never had an issue like this before, it HAS to be down to my ISP right?
Any advice will be GREATLY appreciated, thanks.

Thanks for the reply.
So far I have reset and rebooted my router, the firewall is as default, no blocked sites etc
Sky don't have a clue what I'm talking about so can't really help me.
Just don't get it :(

Unable to connect to Deployment share via the 2012 Update 1 workbench.

Hi Everyone,
This is a tricky one, I've been scratching my head for a few days now. I have a MDT deployment share, which lives on a server, for argument sake, lets call it: MDT-01. Via the Servers MDT Workbench, I can connect to the deployment share just fine, from
any PC, other than my main PC (which is running Windows 8.1), I can connect to the deployment share just fine. If I load the MDT Workbench on my main PC, it just has a deployment share folder with a red cross on it. If I attempt to remove it, it crashes the
MMC, if I try and open the same deployment share it crashes the MMC. If I give the Deployment Share a different share name, it errors and says I can't use an existing deployment share folder.
I used to be able to connect to the share just fine, but since the last couple of days I've not been able to connect.
Further investigation with PowerShell reveals that the console thinks it has a persistent drive, DS001, but the path is blank, as in ''.
Restore-MDTPersistentDrive -verboseVERBOSE: Restoring drive 'DS001' with path ''WARNING: Unable to restore drive DS001.
If I try to remove the Persistent drive, it errors, and if I try to add any new drive to either the same deployment share, or an alternative, it fails.
I can use the New-PSDrive and Remove-PSDrive Powershell commands to create/remove a replicated drive, but that doesn't actually change the Path value in the Get/Restore-MDTPersistantDrive, as they seem to be separate, even though I think they should
be linked.
The Internet has been no help, so I'm asking the Microsoft crew to be helpful, and not just do the usual "This is posted in the wrong place, this question will now be closed... etc, etc!" This is an MDT question, not a Powershell question, I just
need anyone who has indepth MDT knowledge to look at this.
To make clear, this is not a question about a client connecting to the deployment share, that all works fine, and I can update the deployment share fine from any other workbench.
I cannot connect to my deployment share, from my local MMC MDT workbench, as it thinks it already has one, but with a blank path. I've uninstalled, and reinstalled both the MDT, and ADK components on my Local PC, but I still cannot connect to the Share.
My question is this: The files/registry that stores this DS001 path setting is clearly local to my PC, but where is it, I've search the reg, and I've check files, but to no avail, I'm likely to rebuild my PC because of this, but I'd rather not if I can help
it.
Any Ideas people?
P.s. Sorry if this post seems rude, I do appreciate the help, I just don't have time for being messed about, as we're migrating our XP system to 7, and with less than 60 days remaininf, I could do without this... Thanks for understanding. :D

Persistent drives are just a easy way for the MDT console to keep track of the Deployment Shares you like the most (think of it as "pinning" Deployment Shares to the console).
The list of persisted Deployment Shares are per user and stored in the file:
"%AppData%\Microsoft\Microsoft Deployment Toolkit\User.Config"
Mine looks like:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<userSettings>
<MDTProvider>
<setting name="Drive1Name" serializeAs="String">
<value>DS001</value>
</setting>
<setting name="Drive1Path" serializeAs="String">
<value>C:\DeploymentShare</value>
</setting>
<setting name="Drive1Description" serializeAs="String">
<value>MDT Deployment Share</value>
</setting>
</MDTProvider>
</userSettings>
</configuration>
Make sure the Drive Path points to something valid, otherwise, I would delete (rename) the file and let MDT re-create the file.
I hope this answers your question.
Keith Garner - keithga.wordpress.com

Unable to connect to Nike+ website via iTunes

Similar Messages

Maybe you are looking for