Unable to connect to Oracle 9i from Forms 6i

Hi,
I have Oracle 9.2.0 (Personal edition) and Forms 6i installed on a Win2K PC.
I am able to connect to the DB from SQLPLUS. But, I am unable to connect to the DB from Forms 6i. Can anyone suggest where am I going wrong and what is that I need to do to resolve the problem.
Thanks in advance!!!

Normaly forms6i uses Tnsnames.ora file to connect to the database. You need to setup your Tnsnames.ora file correctly by clicking Start---Programs---Directory for Oracle--Oracle net8 easy config, and configure your database connection.

Similar Messages

Connect to Oracle 8i from Forms 6

I have installed Personal Oracle 8i and developper 6 in a NT. I got the error when tried to connect to the Oracle 8i from Form Builder. "could not resolve service name".
I did enter the database name.
Any ideas?

This is a tnsnames problem...check the entry in tnsnames.ora and make sure
its
point to the right DB...there will be a tnsnames.ora under Network and also
a
tnsnames in the developer directory ..FORMS will use the tnsnames under
developer..
Supply the connect string with and without the domain to see if
that works
You can find the domain name in sqlnet.ora file.
null

Unable to Connect to Oracle VMs from network

Hi,
I have problem connectivity problem in my virtual machines.I am unable to connect to XEN VMs from my network. But my domU is visible in my route in the network as an attached device with the correct mac address. But I am unable to connect to other computers from my domU and vise versa. Please help.
Output of ifconfig from dom0 is given below
eth0 Link encap:Ethernet HWaddr 00:0C:29:8C:E2:B3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1051 errors:0 dropped:0 overruns:0 frame:0
TX packets:493 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:96109 (93.8 KiB) TX bytes:76110 (74.3 KiB)
Interrupt:17 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:38762 (37.8 KiB) TX bytes:38762 (37.8 KiB)
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:71 errors:0 dropped:0 overruns:0 frame:0
TX packets:350 errors:0 dropped:37 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:8906 (8.6 KiB) TX bytes:31618 (30.8 KiB)
xenbr0 Link encap:Ethernet HWaddr 00:0C:29:8C:E2:B3
inet addr:192.168.100.32 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe8c:e2b3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1096 errors:0 dropped:0 overruns:0 frame:0
TX packets:432 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:89115 (87.0 KiB) TX bytes:67364 (65.7 KiB)
Output of brctl show is
bridge name     bridge id          STP enabled     interfaces
xenbr0          8000.000c298ce2b3     no          vif1.0
                                   eth0
output of ifconfig from domU is
eth0 Link encap:Ethernet HWaddr 00:16:3E:6E:64:3C
inet addr:192.168.100.33 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::216:3eff:fe6e:643c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:479 errors:0 dropped:0 overruns:0 frame:0
TX packets:71 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:43609 (42.5 KiB) TX bytes:9900 (9.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:329 errors:0 dropped:0 overruns:0 frame:0
TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24394 (23.8 KiB) TX bytes:24394 (23.8 KiB)
My vm.cfg file looks like
bootloader = '/usr/bin/pygrub'
disk = ['file:/OVS/seed_pool/OracleDB/System.img,xvda,w',
'file:/OVS/seed_pool/OracleDB/oracle11g_x86_asm.img,xvdb,w']
memory = '2048'
name = 'OracleDB'
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
vif = ['bridge=xenbr0,ip=192.168.100.33,type=netfront,mac=00:16:3E:6E:64:3C']
vif_other_config = []
xend-config.sxp has following two lines:
(network-script network-bridge)
(vif-script vif-bridge)
Please let me know if any other information is needed.
Thanks,
Ruchin

I have a Dell Power Edge Server with 1 network card. I have installed VMWare ESXi 5 on it. Created several Windows 2003 Servers Virtual Machines. Networking is working fine all these windows machines. On one of the virtual machines I have installed Oracel VM Server 2.2.2 (Dom0) and on top of it I am trying to install Oracle VM Template for Oracle 11g provided by Oracle. I am having connectivity issues on the Oracle 11gDB (DomU). I can ping and ssh from Dom0 to DomU and vice versa. But I cannot connect the Oracle DB machine from any other machine. I can connect the Oracle VM Server (Dom0) from other computers in my network.
Any clue what the issue is ?
Thanks,
Ruchin

ORA-03106 Error when connecting to Oracle 10g from Forms 6i

I have migrated my database from Oracle 8.0.5 to Oracle 10g, version 10.0.1.0.3 through import-export utility. During migration, one difference I made was to change the NLS_LANG to UTF8 from ANSI.
The NLS_LANG for client is AMERICAN_AMERICA.WE81S08859P1.
I am using HP ML370 Proliant Server and running Red Hat Enterprise Linux AS version 3 with Oracle 10g
My client-server application is based on Oracle Developer version 2.1. I am using forms 5.0 and reports 3.0 only.
The problem with me is that the client-server application is working against the upgraded database, but with greatly downgraded speed. The .fmb files cannot be compiled, however some of the .rdf files are compiled successfully, but remaining not.
My question is that is Developer 2000 (Forms 5.0.6 and Reports 3.0.5) compatable with Oracle 10 database, as my application is running very slow ?
I tried Forms 6i to remove this problem. I used Forms Developer 6i Recut version and successfully installed on Windows XP, however, when try to create connection using Net 8 Easy Utility, the connection does not establish with following error:
ORA-03106 : fatal two-task communication protocol error
The entry has been checked in tnsnames.ora and is found correct. I also tried connecting through SQL, but the application closes.
The patch set 17 for installation on Windows XP has also been applied, but still the same error persits.
The same installation has also been checked on Windows 2000, but the same problem persists.
I would be thankful if any one provide me solution for the same. Where I am mistaken and what do I do to get out of this problem.
Regards
Naveen.

Naveen,
Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
Frank

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Unable to connect to administration server from essbase console,

Hi All..
After successfully completely installation and configuration of essbase 11.1.2.3 iam unable to connect to administration server from essbase console,
and also while connecting to oracle database it says "oracle not found".
essbase 11.1.2.3 is installed in windows 2008 server R1.
kindly help us.

Hi John
and thanks again for the reply
These log files has following information
and rest of files are empty in the specified path.
        HyS9RaFrameworkAgentOut :
Java App Loader V1.3 (C)2006 by Hyperion Inc.
$> java -cp . -Dloader.application=xxx.app com.brio.one.common.utils.Loader [arguments]
> Reading application file 'C:\Oracle\Middleware\EPMSystem11R1\common\raframeworkrt\11.1.2.0\bin\agent.app'...
> Loading classes...
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/wksagent.jar ...OK
file:C:/Oracle/Middleware/modules/javax.activation_1.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/foundation.jar ..........OK
file:C:/Oracle/Middleware/oracle_common/lib/java/shared/jsch/0.1.37/jsch-0.1.37.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/iona63.jar ..................OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/comutil1_01.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/eiengine.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/misc/11.1.2.0/servlet-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/JakartaCommons/jakarta-commons.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/logJavaUtil.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/javax.zip ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bqservice.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/bcel-5.1.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/scorecard-search-api.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/raframeworkrt/11.1.2.0/lib/waservices.jar ...OK
file:C:/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity.dep_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/com.bea.core.apache.velocity_1.4.jar ...OK
file:C:/Oracle/Middleware/modules/javax.mail_1.4.jar ...OK
> Creating URLClassLoader...
> Setting New Context ClassLoader...
> Loading Main class 'com.oracle.cmc.Agent'...
> Getting 'main' method...
> Starting application...
       HyS9EssbaseStudio_epmsystem1-syserr:
INFO    Server configuration file: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.
06:38:01 07/05/13 INFO    Logger configuration file: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.
06:38:01 07/05/13 INFO    Starting up.
06:38:01 07/05/13 INFO    Oracle Essbase Studio Server. Version 11.1.2.3.000, Build 4386, March 26 2013. Copyright © 2008 - 2013, Oracle. All rights reserved
06:38:14 07/05/13 (system) INFO    Root folder for flat datasource files has been created: `C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\.\datafiles`.
06:38:14 07/05/13 (system) WARNING Failed to load driver for sap.
06:38:14 07/05/13 (system) WARNING Failed to load driver for teradata.
06:38:14 07/05/13 (system) WARNING Failed to load driver for netezza.
06:38:17 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Unable to establish connection to MySQL server: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server..
06:38:19 07/05/13 (system) SEVERE Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.
   -------------- Exception --------------
   com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)
at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1507)
at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)
at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)
at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)
at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)
Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to MySQL server.
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:130)
at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1229)
at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)
at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)
... 11 more
Caused by: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1116)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:344)
at com.mysql.jdbc.ConnectionImpl.coreConnect(ConnectionImpl.java:2333)
at com.mysql.jdbc.ConnectionImpl.connectOneTryOnly(ConnectionImpl.java:2370)
at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2154)
at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:792)
at com.mysql.jdbc.JDBC4Connection.<init>(JDBC4Connection.java:47)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.mysql.jdbc.Util.handleNewInstance(Util.java:411)
at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:381)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:305)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:207)
at com.hyperion.cp.driver.adapters.sql.mysql.MySQLConnection.createSQLConnection(MySQLConnection.java:123)
... 17 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:218)
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:257)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:294)
... 32 more

Connect to remote database from forms

hi,
I installed 10g developer suite on windows.I have a 10g database running on HPUX server.
I need to connect to this database from forms ( i,e from windows ).
Do i need to install an Oracle client so that forms can talk to a remote database?
I edited C:\Forms_Dev\NETWORK\ADMIN/tnsnames.ora to include the remote database entry. It's not working. So I am thinking maybe I need to install oracle client as a go between.
Thanks

Do i need to install an Oracle client so that forms can talk to a remote database?No, Tnsnames (NET8) is enough.
Write us you tnsnames.ora or try
tnsping <serverdb> from client, and check.

Compile 시 PCC-F-02104, Unable to connect to Oracle 관련 문의드립니다.

안녕하세요..
PCC-F-02104, Unable to connect to Oracle 관련 문제점을 해결하고자 글을 올립니다.
Oracle Client 10.2.0.1 -> Oracle DB 10.2.0.4 로 접속이 되는 구에서 아래와 같이
Client에서 Compile이 안되는 현상이 있습니다.
사례가 있으셨던 분들의 도움을 요청합니다.
$ make all
/user/oracle/product/11.2.0/bin/proc SQLCHECK=SEMANTICS userid=dbmuser/palm_7256@IBQMDB2 MODE=ORACLE DBMS=V8 parse=full
include=/user/ibqm/ibqm/include include=/user/ibqm/ibqm/libs/include pclqf_sql.pc pclqf_sql.c
Pro*C/C++: Release 11.2.0.1.0 - Production on Tue Nov 17 10:10:02 2009
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
System default option values taken from: /user/oracle/product/11.2.0/precomp/admin/pcscfg.cfg
PCC-F-02104, Unable to connect to Oracle
*** Error code 1
make: Fatal error: Command failed for target `pclqf_sql.c'
$
확인해본 내용
1. sqlplus로 원격 접속은 잘 이루어집니다
2. 양 Client 및 DB를 모두 재구성 해도 결과는 동일합니다.
3. sqlcheck=syntax 또는 none 으로 해서 compile 하면 SQLCHECK=SEMANTICS 으로 해야 한다는 Error 메시지가 계속 나옴

It's my GNUmakefile:
# can't use -fno-rtti yet because it causes problems with exception
# handling in GCC 2.95.2
CXXFLAGS = -g
# uncomment the next two lines to do a release build
# CXXFLAGS = -O2 -DNDEBUG -ffunction-sections -fdata-sections
# LDFLAGS = -Wl,--gc-sections
export LD_LIBRARY_PATH = /home/oracle/db_1/lib
ARFLAGS = -cr     # ar needs the dash on OpenBSD
RANLIB = ranlib
UNAME = $(shell uname)
CXXFLAGS := $(CXXFLAGS) -pipe -I/home/oracle/db_1/precomp/public -I/home/oracle/db_1/rdbms/public -I/home/oracle/db_1/rdbms/demo -I/home/oracle/db_1/plsql/public -I/home/oracle/db_1/network/public
ifeq ($(UNAME),SunOS)
LDLIBS =
endif
ifeq ($(CXX),gcc)     # for some reason CXX is gcc on cygwin 1.1.4
CXX = g++
endif
PROC = $(ORACLE_HOME)/bin/proc
PROCPPFLAGS = code=cpp cpp_suffix=cpp threads=yes lines=yes sqlcheck=full userid=user/pw@tnsname
ORA_LIB = -L/hone/oracle/db_1/lib `cat /home/oracle/db_1/lib/ldflags` -lclntst9 `cat /home/oracle/db_1/lib/sysliblist` -ldl -lm
PCS = $(wildcard *.pc)
ifeq ($(PCS),)          # workaround wildcard function bug in GNU Make 3.77
PCS = $(shell ls *.pc)
endif
ORAS = $(PCS:.pc=.cpp)
CPPS = $(wildcard *.cpp)
ifeq ($(CPPS),)          # workaround wildcard function bug in GNU Make 3.77
CPPS = $(shell ls *.cpp)
endif
OBJS = $(CPPS:.cpp=.o)
all:
     $(MAKE) precomp
     $(MAKE) citycardpro
clean:
     $(RM) citycardpro $(ORAS) $(OBJS)
precomp: $(ORAS)
citycardpro: $(OBJS)
     $(CXX) -o $@ $(CXXFLAGS) $(OBJS) $(LDFLAGS) $(ORA_LIB) -lpthread -lcryptopp
.SUFFIXES: .pc
.pc.cpp:
     $(PROC) $(PROCPPFLAGS) $<
.cpp.o: .pc
     $(CXX) $(CXXFLAGS) -c $<
Proc as and sqlplus locate in $ORACLE_HOME/bin
Thanks for reply.
Andrew.

Unable to connect to Oracle Applications database (afscpgcs) after clone

Hi,
I have just moved (clone using rapidclone) two of our 11.5.10.2 install from a solaris SPARC 8 to 10 . After the clone, while discoverer 10g works perfectly well in one environment, it is giving the error below in the another environment.
- Failed to connect to database - Unable to connect to Oracle Applications database (afscpgcs)
Notes:
1. For the 2 environments, nothing as changed apart from the hostnames.
2. The password has not changed on both - from source to targets.
3. This happens when launching discoverer 10g from Apps.... discoverer works well on it own if not launched from apps.
I raised a SR with oracle and the 2 things they said have not worked. they said
1. change signon password case parameter - but I cannot find that in the list of system parameters on our system.
2. The other note says apply patch 6430269 and I can confirm this patch has been on the system for sometime.
Please advise on this if you have come accross this before and you can help here.
Thanks

Thanks for your concern. I have used the notes you listed but no luck. One thing I have to point out here is that I have always cloned from solaris 8 to 8 for years without this problem. Now I am cloning from solaris 8 to 10 and the problems is on just one environment. The other is working well. The problem seems to be related to the apps password but the password has not changed at all. Also, I have tried to change the password to something else and ran autoconfig but no luck. Please help

Unable to connect to Oracle Weblogic Administration Server

Hi Folks,
As part of installation steps, I am facing error with " Unable to connect to Oracle Weblogic Administration Server"
Below is AdminServer Log, So please guide me reolving this impending issue.
####<12 Jun, 2014 2:46:01 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564561284> <BEA-149059> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] is transitioning from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:05 PM IST> <Info> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564565300> <BEA-149061> <Module adminservicesmbeans of application biadminservices [Version=11.1.1] failed to transition from STATE_ADMIN to STATE_PREPARED on server AdminServer.>
####<12 Jun, 2014 2:46:11 PM IST> <Error> <Deployer> <obia111171w64> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KQFMukk5yW^5xV_AiW1JaMxv000002> <1402564571861> <BEA-149231> <Unable to set the activation state to true for the application 'biadminservices [Version=11.1.1]'.
weblogic.management.DeploymentException: Unexpected error encountered
at weblogic.deploy.internal.targetserver.AppContainerInvoker.getOrCreateDeploymentException(AppContainerInvoker.java:299)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:84)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.OutOfMemoryError: PermGen space
at weblogic.j2ee.J2EELogger.logIgnoringUndeploymentError(J2EELogger.java:2902)
at weblogic.application.internal.BaseDeployment$2.logRollbackError(BaseDeployment.java:682)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:65)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Thanks,
Wj

Did you manage to solve this issue?
I'm running into the exact same error, but installing 11.1.1.7.0 on Windows 2003
Haven't found anything on MOS yet :(
Kind regards,
Rob
Edited by: rgouw on 10-apr-2013 1:10

Not able to connect to Oracle EBS from host Windows 7

Hi, I have installed oracle EBS version 12.1.1 (32 bit) on OEL ver 6.3 (32 bit). I have installed Linux on Oracle VM virtualbox ver 4.1.16.
I am having host OS as Windows 7 home on my laptop.
While setting up the Network in Oracle VM virtualbox, I have set "attached to" as 'Host Only Adapter'.
I am able to connect to oracle EBS from the client server(linux) using Firefox browser. Both the services(database, Application) are starting & stopping without any problem.
I have entered following setting in C:\Windows\System32\drivers\etc\hosts file.
192.168.56.101 linux.server
IP address of Linux OS is 192.168.56.101
Please help in resolving the issue.
Thanks!

I am getting error as "Internet Explorer cannot display the webpage" on IE ver 9, when accessing from host machine. On Firefox (ver 12), the error is coming as "The connection has timed out. The server at linux.server is taking too long to respond."
The firewall on the server has been disabled already.
I am not able to ping the server IP address or hostname.domainname from client. Following error comes while pinging -
C:\>ping 192.168.56.101
Pinging 192.168.56.101 with 32 bytes of data:
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Reply from 172.31.3.110: Destination host unreachable.
Ping statistics for 192.168.56.101:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
C:\>
Server Machine IP address -
[Oracle@linux ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:8D:FE:FA
inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe8d:fefa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:125 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17700 (17.2 KiB) TX bytes:5541 (5.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:54823 errors:0 dropped:0 overruns:0 frame:0
TX packets:54823 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17464908 (16.6 MiB) TX bytes:17464908 (16.6 MiB)
[Oracle@linux ~]$
Following is the content of server hosts file(etc/hosts) -
127.0.0.1 linux.server linux
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
Thanks!

How to connect to Oracle database from webdynprojava application

Hi
How to connect to Oracle database from webdynprojava application. where can we provide the code to connect to database.?
Thank You.

Hi,
You need to create Java Bean model. The bean is a typical java bean with default constructor, getter and setter. You can have additional methods for query etc. The attributes in the class will be your model node and attributes.
However you need to configure the connection and create JNDI using visual administrator before writing the code.
You can also consider writing Session EJB with oracle and using them in WD.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/dcaa4f05535591e10000000a1553f7/frameset.htm
Srini

How to connect to oracle database from visual basic 2010 express edition

I have installed visual basic 2010 express edition on windows xp. But visual basic 2010 express edition supports Microsoft sql server database file,Microsoft sql server compact 3.5, Microsoft access database file. I want to connect to oracle database from visual basic 2010 express edition. So what drivers are required and how to do connectivity?

Hello,
I wasn't clear on what you were using to make the connection. I had a look in Visual Studio 2010 (don't have express to test sorry).
I think you mean the Data Sources available under the menu Data-> Datasources. this seems to match the description you give when I
look at the list of datasource options.
In here you can make ODBC connections via the Microsoft .net Data Provider .
If you select ODBC as a datasource you can see listed the DSN's you created - for example I see 2 which use the Oracle ODBC driver.
This assumes you installed an Oracle Client + the oracle version of the ODBC driver (comes with the oracle client).
Once you created a server connection then you should see it in the server explorer.
You can also download the Oracle Developer Tools for Visual Studio which is an add on for VS.
** I suspect this is only for VS 2010 and I didn't see that Express was supported.
http://www.oracle.com/technetwork/developer-tools/visual-studio/overview/index-097110.html
Let me know if that helps.
John

Unable to connect to oracle driver

I am unable to connect to oracle driver. My code is as follows --
try {
Class.forName("oracle.jdbc.OracleDriver").newInstance();
} catch (ClassNotFoundException e) {
System.out.println("Can't find class oracle.jdbc.OracleDriver");
System.exit(1);
} catch (Exception e){
e.printStackTrace();
When I run the code, I am getting the 'ClassNotFoundException'. I have JVM 1.4 and have included classes12.zip and ojdbc.jar in the class path.
What am I missing?

or better yet, upgrade to a less ancient driver jar.
The driver classname you supplied is correct for Oracle 9i and later, but the driver jar you use is for Oracle 8. It's also for Java 1.2 (hence the "classes12" name), and seriously lacking in features and performance compared to more modern versions.
Of course if you're stuck with a 10 year old database version you have little recourse but to use it, but no reputable company would use something that old any longer, especially since it's been out of support for ages.

Unable to connect to service InfoStore from server CRSLinux via CMS

Hi all,
I am getting this exception while trying to logon at Crystal report server from my application at line no 11.
10 .ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();
11. IEnterpriseSession     enterpriseSession = sessionMgr.logon("administrator", "mypasswd", "CRSLinux", "serEnterprise");
12. IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
Here is a detail about environment and server.
I have my application deployed at a linux machine ip 127.1.2.28 and crystal server is installed at an other machine ip 127.1.2.43.
I am able to login to central management console with the same authentication details i.e.("administrator", "mypasswd", "CRSLinux", "serEnterprise");
Exception in details is pasted here as followu2026...
javax.servlet.ServletException: java.lang.Exception: Unable to connect to service InfoStore from server CRSLinux via CMS CRSLinux
     org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:286)
     org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
     org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:449)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.emerald.et.security.ETLoginFilter.doFilter(ETLoginFilter.java:76)
     com.emerald.et.security.ETAuthorizationFilter.doFilter(ETAuthorizationFilter.java:111)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
Any help to it will be appreciated.
Regards
A. Joseph

Hi,
Few things to note:
1. Are you using Java Admin launchpad or the .NET one and if its Java then is it deployed on the same machine as this custom java application?
2. Looks like this app is running off JBOSS and JBOSS is unsupported for Enterprise Web application Deployments.
3. You can trace on the CMS and see if its actually getting the request from the application.
Thanks
Aasavari

Unable to connect to Oracle 9i from Forms 6i

Similar Messages

Maybe you are looking for