Unable to connect to router

Last night I was watching some random video on youtube on my laptop when suddenly I lost my signal. This happens often when I stream multiple videos, usually just an unplug and replug of the router's power cord does the trick. Didn't work this time. Annoyed, I tried to reinstall my router for a fix (is usually my last resort) but at the part where it tries to find the router I get this "Unable to connect to router!" message. I can still seem to connect to the internet with the router on the desktop, but my laptop doesn't even read my wireless. Pinging the router I get time outs, IPconfig gives me a 71.59. instead of a 192.168. I can't connect to the router configuration through 192.168.1.1 at all. I tried unplugging absolutely everything and reseting the router but I'm still stuck. Any help would be appreciated.

Hard reset router for 1 minute and reboot it. Check if IP address is 192.168.1.xxx or not.

Similar Messages

  • Imac i7 unable to connect to router at 270mbs on DGN2000

    Hello,
    I have a Netgear DGN2000 router and i decided to switch the speed settings from 130Mbs to 270Mbs, but after doing so my imac was unable to connect. I tested my windows based laptop and that was working fine. I switched back to 130Mbs and it connected.
    I've checked the Network utility and the Link speed is currently at 54Mbs (not even 130Mbs).
    Airport is compatible with Draft N speed but why is my Imac not even connecting to the router when i select 270Mbs, any suggestions?
    Many Thanks
    S
    Message was edited by: scottydoguk
    Message was edited by: scottydoguk

    Wireless connection speeds (or lack thereof) are a bit difficult to figure out; for instance: do you have anything else that is using the network which still only works with the earlier slower "g"? Usually the network will only work as fast as the slowest (weakest) link. How far is the iMac from the router and are there any obstacles in between (walls, ceilings, anything metal, appliances, etc). And, who is your ISP, how old are the cables they are using from their hub to your house, is there a splitter?
    After almost 2 years of mediocre speeds with Comcast, it was finally determined that a) their cable from the box to the house was defective and replaced and b) they supplied a new splitter. At the same time, I replaced all the Cat5 cables with Cat6 and got a new router (Netgear WNR3500) and haven't had a problem since.

  • WRT54 V8 - Unable to connect to router... Help!

    Hi Guys! 
    Not sure what I'm doing wrong, but I'm not able to connect to my router. I'm new to this whole wireless network and have hit a road block.
    I put in the CD and followed the instructions. When I get to the point of it detecting my computer settings, I get the following message: "Unable to connect to the router. Check that the router has been connected to the computer and that your ethernet adapter is working."
    I was able to connect to the neighbors network from my folks place, so I know it works. I'm guessing if I could get passed that point of the wizard, I'd be able to set up my network...  
     Any suggestions would be greatly appreciated. 
     Thanks in advance!!

    If your Internet Service Provider is Cable follow this link
    If your Internet Service Provider is DSL follow this link

  • M82 Unable to connect to router

    I have recently started up my Thinkcentre M82 tower and it's unable to connect to my home router/modem.
    I'm not sure if this is because it lacks the correct drivers or if it's a different problem but it would be wondeful if someone knows the issue. 
    The only Network Adapter I have is: Intel (R) 82579LM Gigabit Network Connection

    Reboot the router.
    Remove the security from the router.
    If you're able to connect with no security on the router, re-add the security and try it again. If it won't connect, either use a different type of security that does work, or just get a new router. There have been a number of reports of (especially) older Netgear routers that have compatibility problems with newer devices (both iPhones and Adroid devices). The problem is most likely the router.

  • Having issues getting Apple TV to connect to comcast wifi. Sees the router' enter password and says unable to connect. Router connected to iPad and pcs with no issues..., thoughts?

    At a loss. Have comcast wifi. No issues connecting to iPad and laptop. However, when I try to connect iPhone 5 with OS 7 or applets with latest software I get unable to connect message.   I can get the iPhone to connect if right next to modem, but unable to connect one room away. iPads have no issues and connect from any room.

    Hello Tvsteven,
    Thank you for providing all the details regarding the Wi-Fi connection issue you are experiencing with your Apple TV.  I found an article with some steps you can take to troubleshoot an issue like this.
    I recommend reviewing the full article, but the section titled "If you can see your Wi-Fi network, but you are unable to connect to it" specifically stands out to me for the situation you described:
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • EA6500 Unable to connect to router

    I just bought the EA6500 last week. Had to RMA it on Monday and got the new one today. The issue still persists. The power light is constantly blinking and my computer is unable to obtain an IP address from it. I contacted tech support and was unable to get the issue resolved so I had it exchanged believing it was defective. The new one does the same thing. When I connect my computer to it, the light on my Ethernet port stays a solid orange instead of green like it does for my usual router. The Cisco light is constantly blinking. I would really like some assistance in this issue as I doubt I would receive two defective routers in a row.
    Solved!
    Go to Solution.

    The EA-6500 has many many issues i also bought one awhile back and it was broke right out of the box never could get it to work or connect and i have set up many routers. I would return it get your money back and then research your next router purchase.

  • Cisco 886 VA initial set up question - unable to connect to router

    Hallo,
    I am trying to set up my Cisco 886 VA router, but after approx 5sec of "network identification" the network status on my PC is disconnected and I cannot access the router at 10.10.10.1 . The FE port blinks green during this time, then stops and the overall status is green.
    I tried 4 different PCs, have DHCP enabled, all directly connected to one of the FE ports vie ethernet cabel. I also tried fixed IP setting (10.10.10.2 with 255.255.255.248, gateway 10.10.10.1), same result. I also tried hardware reset. And tried to connect via the configuration professional client that would just hang up.
    Any idea what I might be doing wrong? Please be gentle if its a stupid question, I am new to networking
    Thanks & regards
    Helge

    Sorry for not responding, I went on vacation
    I finally figured it out: the factory setting of the 886 has no IP address assigned and all FE ports are shut down.
    This means the only way to connect to it is like Alain suggest via console, then assign the IP address to VLAN1 and open the FE ports.
    I realize now that the Cisco 8xx serie is not for retail customers, but requires learning the Cisco IOS CLI - I am gioing through this now step by step, long journey, especially because I have VDSL IPTV with T-online as my goal
    The only thing that troubles me: the Cisco documentation that came with the product clearly stated that the router comes with pre-configured IP enabled Fastehternet port and suggested this as a method to do the initial set up. It would be nice to update those docs to reflect that the only way to connect is the console via COM and hypertm.
    Thanks for the resoponses, this topic can be closed - I just added this response in case someone searches for the topic.

  • Unable to connect to the router! (wrt54g v. 2)

    I just got a router from a garage sale; it was still in the box and everything.
    Well, I tried hooking it up to my modem and computer to get wifi, but I can't get it to work.
    This is the setup:
    modem -> router -> computer
    I can access the internet when the setup is this way, but there's no wifi, and I can't access 192.168.1.1 or set it up using the CD it came with. When I go through the setting up process with the CD, I get this error message that says "Unable to connect to router! Check that the router has been connected to the computer, and that you're ethernet adapter is working."
    When I try to go to 192.168.1.1, it says "The connection has timed out." I can't ping it either.
    I've also tried resetting it several times, but that doesn't do anything.
    Someone please help!

    Hi sylentknight and welcome to the forums!
    You said that you are able to connect to the internet with this set-up: modem -> router -> computer right? So does that mean that you can ping the router when it is connected directly to your computer? Reason why I'm asking is if it does work, you can try to configure the router for the wireless settings while it is directly connected to the router first then try to go wireless. Please let me know if understood your post correctly.

  • Frustrated - Can't connect to router with laptop after disconnect, other devices work fine.

    I have a RevI Actiontec router with dual antennas(not sure of firmware as I am not at home). My wife can be on her laptop all day, then when I come home with my IPad, it make her lose connection to the router. The router still connects to my iPhone 4 and iPad (both with iOS 6.0.1), but she is unable to connect to router at all. Everything continues to function normally on my Apple devices, so we are still connected to the internet. I have a laptop as well, and when this is happening, both of the laptops stop connecting, but the apple devices and our Toshiba TV and BluRay players continue to function normally. As a temp fix, I disconnect internet from my iPad and restart the router. It works until we try to run both at the same time.
    I am mildly computer literate, though I know little about network setups beyond security, MAC filtering, and other slightly advanced setup stuff.
    This is really frustrating and seems to be getting worse. We used it like this in our new house for several months before this started happening.

    Also check to make sure neither of the devices are set to use a static IP address.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Cannot connect to router E1000

    Hello,
    I own a E1000 router that I use with several wireless machines. I have no problem connecting to the internet.
    Unfortunately, I cannot connect to the configuration of the router by typing https://192.168.1.1/ nor http://192.168.1.1/ in a browser, be it wirelessly or wiredly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router".
    I tried to switch my router off and on, but that doesn't help. Totally resetting the router solves the problem, but not definitely.
    Is there a solution that does not require resetting my router?
    Thank you very much.

    (I don't see anymore how to edit my initial post.)
    The message displayed by Firefox is “The connection was reset” and not what I had translated into “Connection has been reinitialized”.
    As far as the OSs are concerned, the machines that should be able to access my router are running Ubuntu, Android, Windows and an embed version of Linux. I tried with different webbrowsers, including Firefox and the Android Browser.
    Please tell me if I should add any additional information.
    I did a lot of search on the web and some say that similar problems come from the option of HTTPS that is selected for accessing the administration page. Is this correct? Should I abandon the idea of wanting a configuration with HTTPS?

  • HP Officejet Pro 8000 Wireless: HP printer unable to connect to wireless router.

    Installing new printer,  getting error msg saying HP printer unable to connect to wireless router.   MAC address filtering may be enabled on your wireless router which can prevent HP printer from connecting to your wireless network during setup.
    SOLUTION says:  If MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC addressof your printer to the list of permitted devices for your wireless router before continuing.
    My router is WD My Net N900 Router. MAC filtering is diabled. My security mode is WPA/WPA2 Personal. 
    I have run out of ideas to try and fix the issues, would appreciate some help.
    Thanks,

    Hi Jamshidk
    I am surprised you are getting that message and you checked the router settings and it is showing that the Mac Filtering is disabled.
    I would suggest connecting the printer to the router with a ethernet cable to get a valid IP address and then setup the wireless.
    Print a configuration report.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c01554589&lc=en&product=3760410&tmp​...
    Type the IP address from the configuration page  in the address bar into internet explorer browser. This will open the embedded web server for the printer. Click on the Networking tab, on the left hand side select wireless. After this is setup and applied, disconnect the ethernet cable.
    Should be on the wireless network. Takes about 1 minute.
    Run the add printer wizard.
    Go to start, devices and printers and select add a printer. (Win 7)
    Test the printer.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

    Hi-
    Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server.  OWA and mail routing (internal and external) is working fine.  I've even tried on multiple machines
    and all of them experience the same issue.  On a new machine with a fresh version of outlook 2013 installed here is what happens:
    Click on Outlook 2013
    Click Next until the account setup is displayed.
    Name and email is auto-populated
    Established network connection is good
    Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
    And then the logging onto the mail server fails.  The first pop-up is:
    The Connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action.
    Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
    It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
    Mailbox which is populated with: =SMTP:<Valid Email address>
    On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start.  Starting the service outputs:
    EventID 7024
    "The Web Management Service terminated with the following service-specific error:  Unspecified error"
    Not really helpful :)
    Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
    Thanks in advance!

    Hi
    I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
    the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
    I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
    RunspaceId         : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
    Server             : PW-SC-01.companyname.local
    MonitorIdentity    : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
    RequestId          : 75641e34-aa49-4fce-aad7-181b56dd7b29
    ExecutionStartTime : 10/11/2014 13:50:03
    ExecutionEndTime   : 10/11/2014 13:50:03
    Error              : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion: 
                         RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
    Exception          : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable) 
                         from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
                            at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr& 
                         contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
    PoisonedCount      : 0
    ExecutionId        : 63105129
    SampleValue        : 33.5194
    ExecutionContext   :     Mailbox logon verification
                                 EMSMDB.Connect()
                                 Task produced output:
                                 - TaskStarted = 10/11/2014 13:50:03
                                 - TaskFinished = 10/11/2014 13:50:03
                                 - Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC 
                         server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall 
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 2
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1710
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: 0 (0x00000000)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 13
                         EEInfo: Status: 0x000006BA
                         EEInfo: Detection location: 1352
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 1
                         EEInfo:    prm[0]: Long val: -1073606646 (0xC002100A)
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0xC002100A
                         EEInfo: Detection location: 1380
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 12175 (0x00002F8F)
                         EEInfo:    prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
                         EEInfo: ComputerName: n/a
                         EEInfo: ProcessID: 14544
                         EEInfo: Generation Time: 2014-11-10 13:50:03.737
                         EEInfo: Generating component: 14
                         EEInfo: Status: 0x00010000
                         EEInfo: Detection location: 1385
                         EEInfo: Flags: 0
                         EEInfo: NumberOfParameters: 2
                         EEInfo:    prm[0]: Long val: 8 (0x00000008)
                         EEInfo:    prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
                         -111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
                         91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
                         324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
                         2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
                         719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
                         -77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
                         88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
                         -106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
                         -61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
                         79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
                         8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
                         4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
                         911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
                         59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
                         11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
                         11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
                         6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
                         -9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
                         -83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
                         873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
                         -48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
                         -1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
                         -10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
                            at Microsoft.Exchange.Rpc.ClientAsy
    FailureContext     : 
    ExtensionXml       : 
    ResultType         : Failed
    RetryCount         : 0
    ResultName         : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
    IsNotified         : False
    ResultId           : 1748063
    ServiceName        : InvokeNow
    StateAttribute1    : Momt
    StateAttribute2    : UnknownIssue
    StateAttribute3    : PW-SC-01.companyname.local
    StateAttribute4    : Unknown
    StateAttribute5    : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
    StateAttribute6    : 0
    StateAttribute7    : 0
    StateAttribute8    : 0
    StateAttribute9    : 0
    StateAttribute10   : 0
    StateAttribute11   : Momt
    StateAttribute12   : 
    StateAttribute13   : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
                         0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
                         AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
                         AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
                         MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
                         E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
                         MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
                         Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
                         MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
                         E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
                         NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
    StateAttribute14   : 
    StateAttribute15   : 
    StateAttribute16   : 0
    StateAttribute17   : 0
    StateAttribute18   : 0
    StateAttribute19   : 0
    StateAttribute20   : 0
    StateAttribute21   : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
    StateAttribute22   : EMSMDB.Connect()
    StateAttribute23   : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
    StateAttribute24   : Negotiate
    StateAttribute25   : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect(); 
    Identity           : fcd6159dd8fe42aebf10100cc4934356
    IsValid            : True
    ObjectState        : New

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1424 Whenever I try to update an app or download a new one I get an error message stating "unable to connect to iTunes"....I have reset my iPad and router but still get the error message

    Whenever I try to update any apps or download a new one I get the following error message "unable to connect to iTunes". I have reset my iPad and router and also done the same with my iPod but get the same issue.....need some support please?

    There are a number of threads from other people reporting the same iTunes connection issue, it looks like there might be a problem at Apple's end - but you could try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works, but it probably won't until Apple's fixed it

  • I replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks

    Hi Eric,
    What message do you get when you try to connect?
    Cheers!

Maybe you are looking for

  • Header text on sales order not copying to delivery or billing document

    Hi, Copy controls has been maintained. But the text maintaned on the order does not get copied on to the delivery or the billing document. (This is the credit comment maintained on the order) Thanks & regards, Harshini.

  • Printout of Aging Vendor

    HI Gurus, I want take printout of aging vendor from aging vendor screen from T.code S_ALR_87012078? Is it possible. Plz help me 2 take printout of aging vendor. I will hope my issue besolved asap. Thanks & Regards Shruthi

  • Idocs ale and edi

    Hello Experts,        I am beginner in IDOCS,ALE AND EDI concepts, i would appreciate if some one can forward me material on these concepts, also some sample programs or examples on these. Thanks. Raghu

  • Is there any way too ?

    I thought I had it this morning with my file. And now I don't it keeps yelling about chapter stuff. My book is very small and doesn't have chapters in them. Is there a way to get around this problem with the chapters?

  • K9VGM-V (VIA K8M890) on bord sound problem

    I just finished installing my new MB, CPU and Vidio card.... Everything is working perfecktly eksept 1 thing... I cant install the Sound Drivers, it comes up that it failes. Downloaded the newest drivers from MSI but same problem. And to top it all o