Unable to connect to server with zfh proxy

I am running an eval of ZfH 5. I'm unable to connect to the server
with
zfh proxy. I've tried using the IP address and the server name but
was
unable to connect. I have a entry in my hosts file. I using a
Win2000pro
and a Novell server running all updates. Any thoughts on this?

> Hello,
>
> Can you check the registry on the ZfH Server machine? Let me know
if
the =
> HKLM\SOFTWARE\Novell\ZENworks for Handhelds\Current Version\Is Using
=
> Network value is there, and set to 1.
>
> Feel free to email me directly.
>
> Dave Kegel
> Novell, Inc.
>
> >>> <[email protected]> 6/23/03 11:02:36 AM >>>
>
> I am running an eval of ZfH 5. I'm unable to connect to the server
=
> with=20
> zfh proxy. I've tried using the IP address and the server name but
was=20
> unable to connect. I have a entry in my hosts file. I using a
Win2000pro=20=
>
> and a Novell server running all updates. Any thoughts on this?
>
>

Similar Messages

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

Hp officejet pro 8610 - Unable to connect to server

Hello. I bought a printer hp officejet pro 8610. I have a home worth router Zyxel Keenetik. My laptop and smartphone access to the Internet via a router (to access the Internet proxy server is not required). I set up the printer on a wireless connection. Configured to print from a laptop to a local network - this works fine. And now trying to set up ePrint, but faced with the problem - I can not run a web-service on the printer. The message - "Unable to connect to server". I downloaded from HP new version of firmware for the printer and installed it, but the problem remained.

Hi,
Try setting a manual public DNS as following and check if that may help:
Open the Network tab within the printer's web page.
Select IPv4 within the Wireless section.
Select a Manual IP, then click the Suggest an IP button and allow it a few moments.
Once the fields being updated, change the DNS section as following:
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4.
Apply and save the changes, then try enableing Web Services again and check for any difference.
Please let me know if that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

OfficeJet 8600 Pro Unable to Connect to Server for eprint BUT is connected to nework

Just set up my 8600 and everything connected great until I tried to connect to enable web services on the printer. It says it is unable to connect to serve and asks if I want to enter a proxy. I dont understand why it cannot connect to server if my printer is connect to my network??

Hello cboucher78,
Welcome to the HP Support forums. I gather that you are getting an error message when you are trying enable the web services for your Officejet Pro 8600 printer.
The message you are getting is indicating that the printer cannot establish 2-way communication with the HP ePrint servers and needs some assistance. Please set a manual IP address and manual DNS servers to correct this. I have included a link to another post I did that has the steps with screen shots.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Photosmart 5520 - unable to connect to server

I have a HP Photosmart 5520. I frequently need to fix the ePrint service, but I've been trying for two days this time with no success. the printer is connected to the wireless, but then it can't connect to the server and, therefore, I can't use the scanner to send a scanned document to email and a bunch of other things.
I tried to set the DNS address manually to 8.8.8.8 and the alternate DNS to 8.8.4.4, but get the message that this is an invalid input. I went to HP connect and deleted it and tried to add it again (worked fine in the past), but it doesn't work.
It keeps telling me that " the printer is unable to connect to server. Check the internet connect and try again or enter a proxy address".

HI, would it be possible to connect the printer via an ethernet connection even temporarily to see if this helps to resolve the problem?
Although I am an HP employee, I am speaking for myself and not for HP
Say thanks by clicking "Kudos" on the left in the post that helped you.

How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
Anybody has an idea of how to resolve this?
Thanks,
J

1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent

Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server      Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server      (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server      All rights reserved.
2009-11-06 09:49:52.56 Server      Server process ID is 5912.
2009-11-06 09:49:52.56 Server      Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server      This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server      Registry startup parameters:
2009-11-06 09:49:52.56 Server      -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server      -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server      -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server      Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s      Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s      SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s      Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s      The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s      Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s      Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server      The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server      Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server      Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server      Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s     Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s     Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s     Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s     Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s     Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s     Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s     Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s     Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s     Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s     Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s     Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s     Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s     Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s      Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s     CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s     CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s     CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s     CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s     CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s      Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s     The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s     Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name:      Application
Source:        SQLSERVERAGENT
Date:          06.11.2009 10:09:52
Event ID:      103
Task Category: Service Control
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SQLSERVERAGENT" />
    <EventID Qualifiers="16384">103</EventID>
    <Level>2</Level>
    <Task>2</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
    <EventRecordID>8486</EventRecordID>
    <Channel>Application</Channel>
    <Computer>vie-eu-arc-02.global.domain</Computer>
    <Security />
</System>
<EventData>
    <Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?

Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions

Unable to connect to server on ipad mini to edit account info

When I try to view terms and conditions to edit account info on ipad mini, the message unable to connect to server message pops up. I am able to access internet however.

Some folks have discovered that changing their DNS service fixes FaceTime connection issues. The ideal way is to configure your modem/router with DNS service, but often settings in Settings/Wi-Fi on your iPad will override the router settings.
Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8. 8.8.4.4

"unable to connect to server" on my iPhone?

I'm having trouble getting my iPhone to connect to the iCloud server to receive mail etc. I've tried several times and I keep getting a message that says "unable to connect to server". Any ideas how I might fix this? Thx...

Hello, bills47.
Thank you for visiting Apple Support Communities.
I would first start with forcing the Mail App to close then attempt to access your account again.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue persists, the easiest way to troubleshoot this issue would be to delete the account and add it back to the iOS device. Below, I have included two e-mail troubleshooting articles. The first article covers basic email troubleshooting. The second article will assist you if the email account you are experiencing issues with is a Gmail account.
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Cheers,
Jason H.

"Unable to connect to server" when trying to accept the new terms and conditions for iCloud.

I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud. What can I do? I can access the internet, but my clash of the clans applications is failing. The problem started January 1, 2014

I just figured out the problem with my grandma's iphone.
Settings>iCloud>Delete Account
IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good I hope!
Hope this helps.

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why?

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

Unable to connect to server

unable to connect to server when trying to update software. I also cannot purchase and download any songs. When i hit the buy button nothing happens.
I did buy and download songs in mid sept, dont know why this happen thanks Jim

Hi jamcrky,
Welcome to the Support Communities!
Your post doesn't indicate what version of Windows and iTunes you are working with.
I'm including the links below to download the latest version of iTunes.
I'm also including some troubleshooting steps for connecting to the iTunes Store.
iTunes Support
http://www.apple.com/support/itunes/getstarted/
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy

FRM-92052 error... unable to connect to server URL /forms/servlet;

Hi all.
I'm on forms 11g 11.1.2.1.0
I'm configuring my form and when I try to run it I have this error:
FRM-92052: unable to connect to server at URL /forms/servlet;
I have start up weblogic server and everything is ok.
When I try to run my form I have the error.
How can I solve it?
Thanks all for collaboration,
Fabrizio

I open my log file and I copy here error section:
java.lang.NoSuchMethodError: oracle/forms/net/ConnectionException.<init>(ILjava/lang/String;Ljava/lang/Throwable;)V
     at oracle.forms.servlet.BaseServlet.getConnectionException(Unknown Source)
     at oracle.forms.servlet.BaseServlet.logException(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getRunformSession(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getInfo(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.doGet(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.access$100(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<5-feb-2013 14.42.40 CET> <Notice> <Diagnostics> <missuri377> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <2e61ea05cba29510:6243aa29:13caa961585:-8000-0000000000000024> <1360071760720> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'AdminServer' has triggered at 5-feb-2013 14.42.40 CET. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = 5-feb-2013 14.42.40 CET SERVER = AdminServer MESSAGE = [ServletContext@6140131[app:formsapp module:forms path:/forms spec-version:2.5 version:11.1.2]] Root cause of ServletException.
java.lang.NoSuchMethodError: oracle/forms/net/ConnectionException.<init>(ILjava/lang/String;Ljava/lang/Throwable;)V
     at oracle.forms.servlet.BaseServlet.getConnectionException(Unknown Source)
     at oracle.forms.servlet.BaseServlet.logException(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getRunformSession(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.getInfo(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.doGet(Unknown Source)
     at oracle.forms.servlet.ListenerServlet$Request.access$100(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = missuri377 TXID = CONTEXTID = 2e61ea05cba29510:6243aa29:13caa961585:-8000-0000000000000022 TIMESTAMP = 1360071760564
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
How can I solve my problem?
Thanks all for collaboration,
Fabrizio

Error message 'Unable to connect to server'.

When I launch the trial version of Muse CC I get the error message 'Unable to connect to server;. I'm definitely on-line, McAfee doesn't appear to be blocking any communication. Don't know what to do next. Any ideas?

Moving this discussion to the Help with using Adobe Muse CC forum.

Unable to connect to server with zfh proxy

Similar Messages

Maybe you are looking for