Unable to connect to skype, blank page displayed

Hi
I am using windows 7 and i had installed skype long time back and was using quite for some time. It was working good. Since i stopped using skype past 1 or 2 years, now i am unable to connect to skype.. Could you please help me in this regards..
Attachments:
Error page.jpg ‏75 KB

Please be adviced, that Skype versions below 6.14 is now retired. Please download a new client (of your choice above th e 6.14 or) http://www.skype.com/go/getskype

Similar Messages

I have itune 10.5 with windows 7, when i click itune store it is not connected and show blank page

I have itune 10.5 with windows 7, when i click itune store it is not connected and show blank page.

You can't, Anh. That's what people are telling you. At this time there's no way to get out of recovery mode. You're playing around with beta software and this is what you get.
Tell your "developer friend" he needs to talk to other developers to see if this can be fixed, or have him replace your devices that you should never have let him play with to begin with.

Unable to connect to WRT54G2 config page

I recently (~month ago) switched to a new computer after my old one (which I had configured the router on previously with no problems) died. Since then, I have been unable to access my router's config page (entering in the ip address simply results in a blank page with no prompt for username/password). Switching browsers (I've tried Firefox 5 and IE 8) does not solve the problem, nor does disabling AdBlockPlus/NoScript on Firefox. Can any of you figure out a way to help me access my router so I can begin forwarding ports again?

It sounds like your not using the correct IP address of the router. The default IP address for the WRT54G2 is 192.168.1.1. Sometimes you may have to put an "http://" in front of the IP address. Another item to check is to see what IP address your computer is pulling down for its IP address when configured to obtain the IP address automatically from the router's internal DHCP server. Usually, unless the user changed the setting, the router starts numbering the client IP addresses at xxx.xxx.xxx.100 and up. So for example if your computer's IP address was 192.168.3.100, the router's IP address is probably 192.168.3.1.
One other suggestion is to disconnect/turn off all other devices connected to the router including any ISP modem hardware. Its possible another device is defaulting or has a static IP set to the same IP address the router is using and causing a conflict.
A last resort is to do a hard reset by holding in the reset button on the router for at least 30 seconds, then try to access the router's administration page by going to the IP address of 192.168.1.1.

Unable to connect to Skype Nokia 6120 Classic, sig...

Hi I have a Nokia 6120 Classic on Vodafone Egypt. Last month I downloaded skype mobile onto the phone and was able to skype reasonably well (within limitations as I am at a remote location) I left Egypt for some three weeks and on my return the skype application now does not work. I have discussed this with Vodafone and they have resent the settings to the mobile and I have also removed and reloaded Skype. But still no joy it just hangs when signing in until it times out? Skype version is Sybian 1.5.0.12, it's saved on the phone memory. In the advanced settings the incoming conn. port 8877 The Alternative in. ports 8877.
I can still get the internet on the mobile (eg Google and searches ok) Voda fone tell me if I can access the internet I should be able to access Skype? As far as I can see this is the right Skype download and I got it from the Nokia website. In need of some help please as this little application was really quite good, the other options are very expensive.

i have also this problem in pakistan
i m able to connect my skype throug computer and through web page skype.com on my 6120c but through skype messnger on my mobile 6120c i m unable to connect skype for last two days
i also change skype messenger on my mobile but its not working

Blank page display while executing Materials & Sales Order App in Fiori Launchpad Sandbox

Hi ,
I am getting blank page while trying to execute Materials app & Sales Order App in Fiori Launchpad Sandbox
Fiori App to App Navigation in Web IDE - Part 1
Kindly help me to resolve this issue.
Regards,
Bharani

Hi Jamie,
Even after recreating the material & salesorder app still getting the same blank page.
For accessing destination (ES1) i used some other credential as i am not able to reset the password of my account since i am getting below for a longtime.
System Down:
The system is not accessible please have a look at the Operations Document for the system status or check back later.
Thank you for your understanding
So does it has any connection related to the blank page which i am getting?
Regards,
Bharani

Blank page displaying when clicking on the service in ESS

Hi All,
MyExpenses & Leave Request services under ESS is displaying blank page when i log into the portal with test user. When i log in with my user id , both are opening and working properly.
all the remaining services are working properly. for some users, it is working properly and for some users it is displaying blank page.
To work the service properly with the test user, what properties or authorizations i have to set in portal / backend.
pls post answers. This is the third time i am posting this question. I did not get answers for this... its very urgent issue.
Regards,
Vila.

Hi,
The problem seems to be due to lack of proper authorisation.
Go to Portal content->Contents provided by SAP->Open the permission editor of the folder 'End User Content'.
Therein enter eu_role and check the box corresponding to the end-user. Now assign the users eu_role and ESS role.
If everyone is going to use ESS, then 'End User content' to the Group 'Everyone' with read access and then assign the ESS role to the 'Everyone' group.
Hope this helps !
Regards
Srinivasan T

Unable to connect to skype

I've just recently downloaded skype on my Iphone (4s) , and when I log in, it churns around and eventually tells me "unable to connnect to skype" - has anybody else had this problem ? If so, how did you resolve it ? I have the latest i07 installed on my phone.
Grateful for any advice !

I have exactly the same problem on my iPhone and iPad! on my normal computer it works perfect!
I changed my password, still the same message: Skype can't make a connection. I have to check my network but everything looks fine?
It has got nothing to do with the internetconnections, it's working fine. No problem with other apps/websites.
Does it help to remove the Skype app and to install it again?
On my normal computer Skype works perfect, so what's the problem? have anybody the solution?

SRM 4.0-- Blank Page displayed without Errors through Web Browser

Hi All,
Can any one help me in the following ....
We are trying to give access through the Web Browser instead of Sap GUI.
we have started all the services through SICF.
when we tried test service through WEB GUI it is showing a blank page.
It is not giving any errors on the page.
there is no problem in the URL..
Can any one help me by giving option of errors and where to check.....
Bye
Suresh

Hi
Read this ->
The entries in table TWPURLSVR should be as follows:
e.g.
LOGSYS : MRDCLNT100
WEB SERVER : SAPDEV14.XEROX.COM:8001
WEB PROTCL:HTTP
WIN SERVER:SAPDEV14.XEROX.COM:8001
WIN PROTCL:HTTP
BSP SERVER:SAPDEV14.XEROX.COM:8001
BSP PROTCL:HTTP
Also, refer to OSS Note 790727 describes the details for publishing all the services
Refer
why can I not find Service BBPGLOBAL in TA SICF?
for details.
Regards
- Atul

Unable to connect to Skype after update 6.22

Hi Everyone,
Its my first post here so I hope you can help.
Skype has been working fine then today I updated to v6.22 and now I cant sign-in/connect.
I followed these instrctions from another post:
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
If you are on the latest Skype 6.5/6.6/6.7/6.9/6.10/6.11/6.13/6.14 version, then do also this:
Go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
Unfortunately this didnt work so I uninstalled Skype completely then reinstalled with v6.22 but this time I get to the log in screen and there I'm stuck!

Tried doing this too but still cant log-in!
1. Open Run command (pressWin+R buttons) and in the window copy/paste:
%localAppData%\Skype\Apps\
and hit Enter. Location will be opened in File Explorer.
2. Delete everything from that folder.
3. Quit and restart Skype.
Skype login window should be displayed correctly allowing you to enter your Skype credentials.

Blank page displayed while Deploying interactive forms

Hi ,
I am Facing a problem with interactive forms. i am using Adobe interactive forms in Web Dynpro. while deploying interactive forms ,the Deployment result shows blank view.
i have installed ACF, Adobe reader 7.0.
i am using NWDS 04s SP16.
help me if anyone knows the solution.
Regards
Sridhar

HI
Add Interactive form to existing view
Go to properties of IForm.
Select trying display type = native instead of ActiveX.
Give height and width according to need (say height=700 px and width= 100%)
Add pdf_source attribute into context of view of type binary.
Also bind elements to context node which is necessary.
Mandeep Virk

Blank page display with IE9 only.

Have tried all suggestions in on-line list including deleting and loading new reader. No problems displaying stored PDF docs, just web docs.

try swicthing the monitor from a digital to analog input signal

I downloaded 3.6 thre times and I cannot log on. I get unable to connect and problem loading page. Prior to downloading the latest update Firefox worked great. Once downloaded it stopped working. Explorer works fine and my broadband connection is good.

I cannot launch Firefox after latest update was loaded.

Problem Solved. Great work, thanks for the prompt and accurate response. This is one reason why I strongly recommend Firefox over Explorer!

Safari displays white blank page

I'm using OSX 10.8.5 on Macbook pro Intel Core 2 Duo.
Since almost a year ago, I didn't see pages in Safari, it display white blank screen but it has contents.
Safari loaded contents, but it didn't render contents into page.
I found that, Safari update entry of 'com.apple.afari.plist' file in the Preference folder and it cause Safari fail to render pages.
When Safari start, it changes
<key>com.apple.Safari.ContentPageGroupIdentifier.WebKit2AcceleratedCompositingEnabled</key>
entry to
<false/>
and next time I start Safari, white blank page displayed.
If I change
<key>com.apple.Safari.ContentPageGroupIdentifier.WebKit2AcceleratedCompositingEnabled</key>
entry to
<true/>
and start Safari, I can see pages well, but I can't stop Safari to update the value to false.
Any solutions to solve this issue ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Blank page produced when clicking on title of Content Area Portlet in version 3.0.8

We are getting a blank page when we click the title of the ContentArea/Folder portlet in a page. The problem is with the URL, which has _mode=6 as a parameter. When we reoved that parameter from the url content area is loaded accurately. Can you please tell us how to fix this bug. We are using 3.0.8.

Hi,
go to http://metalink.oracle.com/
click on PATCHES and search for product PORTAL release 3.0.8, platform Sun Solaris. The result is:
"ID:694095 Patch::1574770
BLANK PAGE DISPLAYED WHEN CLICKING SOME PORTLET LINKS IN MONITOR TAB PAGE".
Download the patch and follow the instructions.
Bye,
Ettore.
null

When opening a web page, a blank page about the size of a third of the page appears for a sec then the full page comes up

when I open igoogle or any other website, a mini blank page (about a third of the full screen) appears for a sec then the full page complete with info appears. The blank page displays only mozilla firefox, the next full size shows the complete web site, e.g. google, yahoo, hotmail, etc. The lap top does not do this only the desk computer. This has only started recently. We did up grade our dsl speed but they ATT has assured us that the problem rests with the browser.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Unable to connect to skype, blank page displayed

Similar Messages

Maybe you are looking for