Unable to connect to social media

As of Thursday night, 10/30/14, I can't connect to either Twitter.com or Facebook.com on my Macbook Pro Retina 15. As of this morning, 11/1, I can no longer share links to either from other web pages. The error message is always the same: that Safari (and by extension Chrome, since I tried that and it doesn't work, either) can't connect with the server. I have no problem connecting with my iPad via Safari, or on either of my Windows machines, so it's clear the issue is limited to the laptop.
This problem occurred after I installed an update of Antisocial from their website per instructions received via email. I launched to software to use it, and the connection problem began that same night. Please note I do NOT have Twitter.com listed as one of the websites to be blocked when the program is running. I have not problem connecting to Twitter via Hootsuite in my browser; I don't have a desktop Twitter client installed.
I uninstalled Antisocial using CleanMyMac then had to manually drag it to the trash, where I used CleanMyMac to empty the trash. It now appears to be gone. I can find no evidence any part of it is still on the machine and running via Activity Monitor. I deleted cookies and all the other whatnots; still no joy.
Thoughts?

Similar Messages

Unable to connect gateway - Social Network

Social Network Application is not working in N8 from last week and i have tried so many solution but still not able to get the application work Can anyone help me out

hello
i have similar problem since last 4days..
me able to log in to facebook throu Opera Mini
but cant from facebook Apps

N8 Ovi Social widget unable to connect to facebook...

Earlier I had trouble in viewing images and icons on facebook while using ovi social widget.
When to solve this issue i tried re-installing widget, it worked once and could connect to facebook. But now it is showing error Unable to connect gateway, try later.
However it is possible to log in to facebook using web browser, which means my facebook account is ok as well as no problem on service provider's side too.
Please provide solution.

It seems the server is down forever. I am not able to configure Social on my Nokia N8. Someone told to configure Ovi email. I did it.. but there I am getting error Service currently unavailable. I tried to find the reason I got to know that it requires Nokia Messaging service enabled. I have no idea how to configure Nokia messaging service. I am also not sure why does Facebook and Twitter configuration requires Nokia messaging service!... Can some one help?

Social Media connection

Dear All,
How can we connect BO and Social media ?
What are the tools (Ex- Lumira, Webi, etc) can connect ?
Is there any best practice available ?
Thanks all.
Regards,
Balaram

Hi - there are several utilities to export from social media to Excel and then use Lumira
Also SAP's Data Services can help parse twitter posts.
See Let me google that for you

C7 Social: Unable to connect to Gateway!!!

Hello All,
When i'm trying to use Social client in C7 getting the message "Unable to connect to Gateway". It was working fine for some days. Any idea why this issue is occurring?? How to overcome from this??
Thanks,
Abhilash.

Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju

Wifi unable to connect when tv streams media

We just got a new Sony TV tonight that has a non wifi, LAN connection, and the Netflix application on it. As soon as I logged into Netflix on the TV, my iPad is unable to connect to wifi. I've tried disconnecting, reconnecting, renewing, and restarting router. The minute that I turned off the TV, I'm able to connect just fine again. Any help would be greatly appreciated
Cheers,
Brian

if the tv suck up all the bandwidth for the netflix connection it would mean no more internet for other devices

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to load from Windows Media Player to iPod Touch. Help appreciated Big Al

Unable to load music or audiobook from Windows Media PLayer to my iPod Touch. Also unable to connect to internet via NON WiFi Broadband. Help please.

You don't.
You sync via itunes
Put all of your music in itunes.

[Solved] Samba log spam: Unable to connect to CUPS server

Hi everyone,
I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
Apr 18 12:30:05 asakura nmbd[4361]:
Apr 18 12:30:05 asakura nmbd[4361]: *****
Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
Those last two lines get spammed constantly.
I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
Unfortunately it doesn't appear to make any difference.
Here is my /etc/samba/smb.conf:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = MYGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = no
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
; [homes]
; comment = Home Directories
; browseable = no
; writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
; [printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[shared]
path = /media/shared
valid users = foosoft
public = no
writable = yes
[tomato]
path = /media/data1/tomato
valid users = foosoft
public = no
writable = yes
show add printer wizard = no
printing = none
printcap name = /dev/null
disable spoolss = yes
I'm totally out of ideas here, anyone have a tip on what I could try next?
Last edited by FooSoft (2009-04-18 19:52:28)

glad you posted it first i had the same problem.
However, samba was complaining that
printing = none
was invalid. I removed that line and it works great.
thanks
Last edited by lio (2009-10-16 00:20:14)

Ok, when i try to sync my new ipod touch to my computer, it says unable to connect for unknown reasons, and as a benefit, it shows the songs as faded in the list and therefore unplayable. how do i fix this problem?

as stated in the title, i when i try to sync my new ipod touch to my computer it says its unable to connect due to unkown reasons. the music is listed on my touch as there, but faded (minus a selected few songs) and therefore are unplayable. i have no idea where to start, i figured downloading the newest itunes update, however, it no longer shows up when i start it up. confused.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another cable and USB port
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My firefox won't work; It says "unable to connect" and I have tried all of the tips for troubleshooting and it still wont' work.

Firefox opens up with an "unable to connect" message; it also says it cannot establish a connection to the server with these three bullets: 1) The site could be temporarily unavailable or too busy. Try again in a few moments.
2) If you are unable to load any pages, check your computer's network connection.
3) If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I have tried to do all of the tips that you have on your website for troubleshooting and nothing seems to work. I know it is not my Internet connection because my roommates can get on Firefox without a problem and my Internet Explorer opens just fine.
== This happened ==
Every time Firefox opened
== I wanted to do homework last night. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; Tablet PC 2.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; AskTbARS/5.8.0.12304)

Ccote15-
If your iPad is defective and is still under warranty, you can take it to an Apple Authorized Repair Center and get it fixed. If you are worried about a defective replacement, then a repair may be a better way to go. <Apple Authorized Repair Centers>
Personally, I would prefer getting a replacement. You read about many defects here in this forum, but they only represent a tiny percentage of all iPads sold.
Fred

Server Error in '/' Application. [COMException (0x81020024): Unable to connect to database]

Hi,
My team and I are trying to resolve this issue. some of our users are having trouble uploading data into the database. this is the error that they are getting.
I would really appreciate it if you could help me get ridd fo this issue.
Server Error in '/' Application.
Unable to connect to database. Check database connection information and make sure the database server is running.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.Runtime.InteropServices.COMException: Unable to connect to database. Check database connection information and make sure the database server is running.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[COMException (0x81020024): Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequestInternalClass.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId,
String bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +0
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +359
[SPException: Unable to connect to database. Check database connection information and make sure the database server is running.]
   Microsoft.SharePoint.Library.SPRequest.PreInitServer(String bstrAbsoluteRequestUrl, String bstrServerRelativeUrl, Int32 lZone, Guid gApplicationId, Guid gSiteId, Guid gDatabaseId, String
bstrDatabaseServer, String bstrDatabaseName, String bstrDatabaseUsername, String bstrDatabasePassword, Boolean fHostHeaderIsSiteName) +479
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +666
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +548
   Microsoft.SharePoint.SPWeb.EnsureSPRequest() +75
   Microsoft.SharePoint.SPWeb.get_Request() +74
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +613
   Microsoft.SharePoint.WebControls.SPControl.GetContextWeb(HttpContext context) +41
   Microsoft.SharePoint.SPContext.get_Current() +123
   CKS.EBE.BlogContext.get_BlogEnabledSite() +37
   CKS.EBE.BlogHttpModule._app_PostAuthorizeRequest(Object sender, EventArgs e) +113
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
the description of the error on the server is as follows:
The description for Event ID ( 27745 ) in Source ( Windows SharePoint Services 3 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use
the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: #50071: Unable to connect to the database MOSS_Content_RBI on BartDB\Bart. Check the database connection information
and make sure that the database server is running..

are you using the Aliases for the SQL Server, make sure your account having the correct permission.
If it is your QA farm, you can run the config wizard to fix his problem...
check this post having the similar issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/478d6b3a-a51e-48c5-832b-5afb51c69734/unable-to-connect-to-the-sql-content-database-from-sharepoint-web-front-server?forum=sharepointadminlegacy
http://hammad1.wordpress.com/2008/06/04/unable-to-connect-to-database-in-event-logs/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7 (Apex Listener)

Background
1. Weblogic 10.3.6.0 running on Oracle Linux 6.5 with Oracle JRockit(R) (build R28.2.3-13-149708-1.6.0_31-20120327-1523-linux-x86_64, compiled mode)
2. Oracle Apex 4.2.1
3. Apex Listener 1.1.3
4. Apex and Apex Listener running on the Weblogic box above
5. SQL Developer 4.0.2 running on Windows 7 64 bit / Java 1.7.0_55
Updated Apex to 4.2.5 via p17966818_425_Generic.zip patchset. Apex environment running fine as do all applications via Listener 1.1.3
Updated Oracle Listener to the latest version of Oracle REST Data Services 2.0.7
Current Status
Apex Applications and RESTful services are running fine.
Problem
Unable to connect SQL Developer 4.0.2 to Oracle REST Data Services 2.0.7
Error message in SQL Developer - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
Additional Information
Steps followed -
1. The oracle users APEX_LISTENER and APEX_REST_PUBLIC_USER did not exist, so I ran apex_rest_config.sql from the APEX 2.4.1 patchset whilst connected sys as sysdba and provided the same password as APEX_PUBLIC_USER for both users.
2. I also ran
grant insert, delete on APEX_040200.wwv_flow_rt$privilege_groups to APEX_LISTENER;
alter session set current_schema = APEX_LISTENER;
create or replace synonym wwv_flow_rt$privilege_groups for APEX_040200.wwv_flow_rt$privilege_groups;
as per Oracle SQL Developer User's Guide Release 4.0
3. copied ords.war to apex.war
4. java -jar apex.war configdir /u01/app/oracle/admin/apex/devdomain1/
5. java -jar apex.war
Jun 5, 2014 5:15:31 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter the name of the database server [localhost]:dbservername
Enter the database listen port [1521]:
Enter 1 to specify the database service name, or 2 to specify the database SID [1]:1
Enter the database service name:dbservicename
Enter the database user name [APEX_PUBLIC_USER]:
Enter the database password for APEX_PUBLIC_USER:
Confirm password:
Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:2
Jun 5, 2014 5:16:52 PM oracle.dbtools.common.config.file.ConfigurationFiles update
INFO: Updated configurations: defaults, apex, apex_al, apex_rt
Enter 1 if you wish to start in standalone mode or 2 to exit [1]:2
6. java -jar apex.war user adminlistener "Listener Administrator"
Jun 5, 2014 5:18:52 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /u01/app/oracle/admin/apex/devdomain1/apex
Enter a password for user adminlistener:
Confirm password for user adminlistener:
Jun 6, 2014 5:19:12 PM AM oracle.dbtools.standalone.ModifyUser execute
INFO: Created user: adminlistener in file: /u01/app/oracle/admin/apex/devdomain1/apex/credentials
7. Updated the defaults.xml file
Added
<entry key="apex.security.user.roles">RESTful Services</entry>
<entry key="apex.security.developer.roles">OAuth2 Client Developer, SQL Developer</entry>
as per Oracle SQL Developer User's Guide Release 4.0
Changed
<entry key="debug.printDebugToScreen">false</entry>
to
<entry key="debug.printDebugToScreen">true</entry>
for RESTful debugging
Added
<entry key="security.verifySSL">false</entry>
to use OAuth2 in Non HTTPS Environment as per Oracle® REST Data Services Installation and Configuration Guide, Release 2.0
8. Deleted the Admin and Manager Roles within the apex application deployment which were part of the Apex Listener 1.1.3 install
9. Deployed the apex.war in weblogic
10. Stopped and started the weblogic server to which apex.war was deployed
11. In SQL Developer, View, RESTful Services. In the RESTful services windows hit connect, Create a new connection,
Connection Name DEV
Username adminlistener
selected http protocol
Hostname weblogicservername
Port 7250
Server Path /apex
Workspace (blank)
On the Authentication dialog
Username adminlistener
Password passwordsuppliedabove in step 6
Response is a dialog box titled Authentication Failed
message - Cannot connect to DEV. HTTP/1.1 403 Target service not allowed
NOTHING UNUSUAL IN ANY OF THE WEBLOGIC LOG FILES, EXCEPT THAT IT STATES
'Oracle REST Data Services version : 2.0.6.27.18.06' when I've installed 2.0.7.
Any help much appreciated

Further to the above post, I thought I'd simplify my Apex Listener install just to see if I can connect to it via SQL Developer
So downloaded the latest version 2.0.8 and decided to configure and run the Listener on my pc whilst still connecting to the same database.
Operating system : Window 7 Pro 64 bit
Oracle Apex Listener 2.0.8
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 23.25-b01, mixed mode)
Went through the configuration as above, once started I tried again to access the listener via SQL Developer. This time I received this output from the listener:
INFO: Error: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found, occurred during execution of: [CALL, insert into wwv_flow_rt$approvals (user_name,status,client_id,security_group_id,created_by,created_on,updated_by,updated_on) values(/*in:user_id*/?,/*in:status*/?,/*in:client_id*/?,/*in:tenant_id*/?,upper(/*in:user_id*/?),/*in:created*/?,upper(/*in:user_id*/?),/*in:created*/?), [tenant_id, in, class java.math.BigInteger], [client_id, in, class java.math.BigInteger], [user_id, in, class java.lang.String], [status, in, class oracle.dbtools.rt.oauth.ApprovalRequest$Status], [created, in, class java.sql.Timestamp]]with values: [adminlistener, APPROVED, 3858401374580004, -1, adminlistener, 2014-06-23 12:19:18.785, adminlistener, 2014-06-23 12:19:18.785]
SQL Developer responded with an Authentication Failed titled dialog with the following displayed in the body of the dialog
Cannot connect to DEV.
<!DOCTYPE html>





<html>

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
<style type="text/css" media="screen">html,body,div,span,h3,p,ol,ul,li,header,hgroup{margin:0;padding:0;border:0;font-size:100%;font:inherit;vertical-align:baseline}header,hgroup{display:block}body{font:normal 12px/16px Arial,sans-serif;margin:0 auto;background:#6a9cda}header#xHeader{border-bottom:1px solid #8fa4c0;position:relative;z-index:10;background:none #000}header#xHeader hgroup{width:974px;margin:0 auto;position:relative;height:36px;background:none #000}header#xHeader a#uLogo{margin:8px 0;display:inline-block;font:bold 14px/20px Arial,sans-serif;color:#AAA;text-decoration:none}header#xHeader a#uLogo span.logo{color:#F00}.no-css3 div#xContentContainer div.xContent{padding-top:14px}.no-css3 div#xContentContainer div.xContent div.xMainLeft h2{margin-top:0}div#xWhiteContentContainer{margin-bottom:30px}div#xWhiteContentContainer.xContentWide{background:#FFF;margin-bottom:0}div#xWhiteContentContainer.xContentWide div.xWhiteContent{-moz-border-radius:0;-webkit-border-radius:0;border-radius:0;-moz-box-shadow:none;-webkit-box-shadow:none;box-shadow:none}div#xWhiteContentContainer div.xWhiteContent{width:974px;margin:0 auto;padding:0 0 20px 0;background:#FFF;min-height:500px;-moz-border-radius:0 4px 4px 4px;-webkit-border-radius:0 4px 4px 4px;border-radius:0 4px 4px 4px;-moz-box-shadow:0 1px 2px rgba(0,0,0,0.15);-webkit-box-shadow:0 1px 2px rgba(0,0,0,0.15);box-shadow:0 1px 2px rgba(0,0,0,0.15)}div#xContentHeaderContainer{background:#6a9cda;-moz-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;-webkit-box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset;box-shadow:0 -1px 0 rgba(0,0,0,0.15) inset}div#xContentHeaderContainer div.xContentHeader{width:974px;margin:0 auto;padding:30px 0 32px 0;position:relative;min-height:60px}div#xContentHeaderContainer div.xContentHeader h3{font:bold 24px/24px Arial,sans-serif;color:#fff;text-shadow:0 2px 1px rgba(0,0,0,0.25);margin:0 0 20px 0}div#xFooterContainer{min-height:200px;border-top:1px solid rgba(0,0,0,0.15);background:#6a9cda}body.errorPage div#xContentHeaderContainer div.xContentHeader{min-height:30px}body.errorPage div#xContentHeaderContainer div.xContentHeader h3{font:bold 30px/30px Arial,sans-serif;color:#FFF;text-shadow:0 1px 2px rgba(0,0,0,0.25);margin:0}div.errorPage p{font:normal 14px/20px Arial,sans-seri;color:#666;padding:0 0 10px 0}div.errorPage ul{list-style:disc outside;padding:0 10px 0;margin:0 0 20px 0}div.errorPage ul li{font:normal 12px/16px Arial,sans-serif;color:#666;margin:0 0 8px 10px}pre{font-family:Consolas,"Lucida Console","Courier New",Courier,monospace}
</style>
<script type="text/javascript" charset="utf-8">
'header hgroup'.replace(/\w+/g,
function(n) {
document.createElement(n)
</script>
<title>Internal Server Error</title>
</head>
<body class="errorPage">
<header id="xHeader">
<hgroup>
<a id="uLogo" href="./"><span class="logo">ORACLE</span>
REST DATA SERVICES</a>
</hgroup>
</header>
<div id="xContentHeaderContainer">
<div class="xContentHeader">
<h3>
<span class="statusCode">500</span> - <span
class="statusMessage">Internal Server Error</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons">
</ul>
</p>
<p>
<pre>Request Path passes syntax validation
Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
Choosing: oracle.dbtools.rt.oauth.TokenHandler as current candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
No Tenant Principal established yet, continuing processing
APEX_LISTENER pool exists, continuing processing
No matching tenant found for: oauth2, cannot dispatch
Chose oracle.dbtools.rt.oauth.TokenHandler as the final candidate with score: Score [handle=null, score=0, scope=SecurityConfig [constraint=secure, realm=OAUTH_CLIENT, logonConfig=NONE], originsAllowed=[], corsEnabled=true] for: POST oauth2/token
oauth2/token authorized as: p6xycV-2QceFnFHkWyJlnA..
</pre>
</p>
<p>
<pre>WebException [statusCode=500]
at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:514)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApprovedRequest(JDBCOAuthDataAccess.java:181)
at oracle.dbtools.rt.oauth.OAuthAuthorization.resourceOwnerCredentials(OAuthAuthorization.java:654)
at oracle.dbtools.rt.oauth.OAuthAuthorization.tokenRequest(OAuthAuthorization.java:273)
at oracle.dbtools.rt.oauth.TokenHandler.post(TokenHandler.java:44)
at oracle.dbtools.rt.web.RequestHandler.response(RequestHandler.java:268)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:361)
at oracle.dbtools.rt.web.RequestHandler.dispatch(RequestHandler.java:85)
at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:93)
at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)
at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)
at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
at java.lang.Thread.run(Unknown Source)
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (APEX_040200.WWV_FLOW_RT$APPROVALS_SGID_FK) violated - parent key not found
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1046)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
at sun.reflect.GeneratedMethodAccessor28.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:230)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at com.sun.proxy.$Proxy44.execute(Unknown Source)
at oracle.dbtools.common.jdbc.JDBCInsert.execute(JDBCInsert.java:58)
at oracle.dbtools.rt.oauth.jdbc.JDBCOAuthDataAccess.createApproval(JDBCOAuthDataAccess.java:487)
... 34 more
</pre>
</p>
</div>
</div>
</div>
<div id="xFooterContainer">
</div>
</body>
</html>
I am assuming this must be part of the problem I am seeing this the Weblogic deployment in my original post.
Does anyone have any suggestions on how best to tackle this?
Regards,
Derek

Exchange 2007 - unable to connect to smtp after severall hours

Hi,
We have a Windows SBS 2008 server with Exchange 2007 SP3. After severall hours we are unable to connect to the server with telnet on port 25 from outside. Sometimes a local telnet on the server still works but not always.
The only solution is to restart the server. The transport service can not be stopped.
Even after a fresh reboot the telnet session does not alway show the smtp banner.

Hi Joost,
Is there any related error message left on Exchange server?
I have found a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/5e2b3320-7c97-4b33-bd8e-e27768f51ec0/hub-transport-service-wont-start-and-keep-running-sbs-2008-exchange-2007
More detailed error message without sensitive informaiton is helpful for the further troubleshooting.
Also, SBS 2008 is different from Exchange 2007 on Windows Server, I suggest ask SBS Forum to double confirm this issue.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

TS1368 I got an new nano for christmas and l put it in to the computer, l just got Windows 8 on my computer, l am unable to connect my new nano to my computer. l have deleted itunes and put it back on my computer and still unable to connect please help me

I got a new nano l am unable to connect it on my computer, l have windows 8. I have deleted itunes and downloaded back on my computer, l still am unable to connect my nano to my computer.
When l put my nano on the computer itunes saids "Accessing Itunes" it is not connecting.
Please help me.
Thanks

Uninstalling and reinstalling iTunes has no affect on the media on the computer or the account it is linked to.
If the media was purchased under another iTunes account, then it is permanently tied to that account.
Using mulitple iDevices with one computer

Unable to connect to social media

Similar Messages

Maybe you are looking for