Unable To Connect To Some Sites

I am unable to connect to some sites, with the error message "Safari can’t connect to the server." I cannot connect to the site with Firefox either.
Example sites are: www.bostonpizza.com and www.airmiles.ca
However, I am able to connect to these sites when I boot into WinXP.
I have tried pinging the sites in question, getting the following error message: "ping: sendto: No route to host"
It looks like something is bonked with my OS X settings. I have tried the following without any luck:
1. Reseting the computer
2. Clearing Safari's cache
3. Reseting PRAM settings using OptCmd+pr key commands on startup
4. Using OpenDNS in the network DNS settings
I am connected directly to a Linksys ADSL Ethernet modem, and my firewall is set to allow all incoming connections. I'm not running PeerGuardian, and as far as I know I'm not running anything in the background that would bork my network.
Any help or suggestions would be greatly appreciated.
Thanks,
Orest
I have tried doing a traceroute when running in WinXP, with the following information:
racing route to www.bostonpizza.com [64.40.107.95]
over a maximum of 30 hops:
1 8 ms 8 ms 8 ms d75-152-160-1.abhsia.telus.net [75.152.160.1]
2 7 ms 7 ms 7 ms 154.11.184.193
3 9 ms 8 ms 7 ms peer.clgrab21gr02.bb.telus.com [154.11.3.42]
4 20 ms 20 ms 20 ms rc2wh-pos0-0-2-0.vc.shawcable.net [66.163.77.197]
5 20 ms 20 ms 20 ms ra2wh-tge2-1.vc.shawcable.net [66.163.69.186]
6 22 ms 21 ms 21 ms rx0wh-net-nation.vc.bigpipeinc.com [64.251.87.170]
7 21 ms 21 ms 21 ms www.bostonpizza.com [64.40.107.95]
Trace complete.

Thanks for the replies, unfortunately I still haven't resolved the issue. I would say 99% of the sites I visit work fine, but for some reason the odd site won't work.
This is the results for the ping on my Mac OS X system:
PING www.bostonpizza.com (64.40.107.95): 56 data bytes
ping: sendto: No route to host
I can access the site running WinXP in Parallels, and I can access the site in question when I use bootcamp to boot into WinXP, using the same network hardware and same connections.
It looks like from the ping, DNS is working and able to translate the site name, but for some reason cannot access the site.
This is the results of a traceroute that I ran while booted in WinXP:
Tracing route to www.bostonpizza.com [64.40.107.95]
over a maximum of 30 hops:
1 8 ms 8 ms 8 ms d75-152-160-1.abhsia.telus.net [75.152.160.1]
2 7 ms 7 ms 7 ms 154.11.184.193
3 9 ms 8 ms 7 ms peer.clgrab21gr02.bb.telus.com [154.11.3.42]
4 20 ms 20 ms 20 ms rc2wh-pos0-0-2-0.vc.shawcable.net [66.163.77.197]
5 20 ms 20 ms 20 ms ra2wh-tge2-1.vc.shawcable.net [66.163.69.186]
6 22 ms 21 ms 21 ms rx0wh-net-nation.vc.bigpipeinc.com [64.251.87.170]
7 21 ms 21 ms 21 ms www.bostonpizza.com [64.40.107.95]
Trace complete.
When booted in Mac OS X, I am able to ping every listed IP address in the WinXP traceroute, except for the last one, 64.40.107.95.
Still no idea what is going on, my network troubleshooting toolbox consists of pretty much ping, and googling error messages.
Thanks,
Orest

Similar Messages

  • IPAD2 not connecting to some sites since IOS update

    Since the recent IOS 8 update, my IPAD will not connect to some sites.  It reads servere not found.  I'm trying to get onto my work site which is very important.  Now, my IPAD seems useless for work.  I have turned off and back on which did not help.  I have read that resetting it doesn't help either.  Please help.

    i checked for updated firmware on the d'link dir-615 router back in september when this first happened (after the ios6 update) but the firmware was already up to date - although the last update was 2009. 
    This was my first clue.
    After further research, I discovered that all DIR series products have been discontinued by D'Link.  This means that when apple is preparing for a software update, it requests all software/hardware specs from wifi router companies like D'Link, Netgear, Garmin, Cysco, etc.  Since D'LInk no longer produces DIR series routers, they did not provide the info.  D'Link only provided info for it's newest line of wireless routers. 
    Leaving all existing DIR users in the dust, with a failed strategy that we'd all buy the new line of wifi routers.
    Yesterday, I purchased an Apple wifi router, although pricey at $99, i plugged it in, typed the network name and pw want to use, and it was up and running in less than 5 minutes.  The apple router will recieve software/firmware updates just as my iphone, macbook, & ipad does. Everything is working perfectly, and the higher price is worth the convenience and reliability.
    If anyone makes it this far, the only thing left would be to check with your internet service provider (comcast, RCN, etc) and make sure you have the most up to date modem.  some folks are unable to send text & pic messages on wifi using an out of date modem. (i didn't have to replace mine, but i'm also not having this issue now that i have the new apple wifi router.)
    Hope this helps at least a few people out there.

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • My browser's are 'unable to connect' to some websites after upgrading to mavericks.

    the message i get is:
    Unable to connect
    Firefox can't establish a connection to the server at www.adobe.com.
        The site could be temporarily unavailable or too busy. Try again in a few moments.
        If you are unable to load any pages, check your computer's network connection.
        If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    this is happening on reliable sites such as www.adobe.com, however, there are other sites that also won't load such as (http://www.adobe.com/products/reader.html), and though it seems specific to adobe. i had a friend try going to the adobe site on a different machine running osx 10.6 and they could load the page fine. i tried firefox and safari and neither will load the page.
    i'm running:
    os x 10.9.2
    processor- 3.06 GHz Intel Core 2 Duo
    memory- 8 GB 1067 MHz DDR3
    thanks,
    rick

    You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Back up all data.
    If you have more than one user account, you must be logged in as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '11,$d' /etc/hosts
    This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • Firefox 38.0 Unable to connect to verizon sites including email

    Over the past 2 days I have been unable to access any verizon sites (especially my web email) using Firefox 38.0.5.  Firefox appears to be trying to connect but the status shows it bouncing between "Fios Trending" and the sign in page.  No problem with chrome or IE.  I've tried refreshing Firefox, but the problem persists.  Not sure if this is a verizon problem or a Mozilla problem. Anyone else experiencing this?

    ElizabethS wrote:
    Have you tried clearing your cache, shutting down the browser and trying again? And have you tried a second browser? Yes.  I've cleared history, cache, cookies, etc.  I've tried "Refreshing" Firefox, and even started in safe mode (firefox) to disable addins, but the problem persists.  Posted similar message on the Mozilla forums page, but no response yet.   I don't experience the problem in Chrome or in Internet Explorer, but really don't like those browsers.  

  • Firefox is "unable to connect" to any site, while other broswers can

    I've tried clearing my cookies and history, disabling addons/extensions and the firewall, changing/disabling proxy settings, and read several of the articles, but nothing seems to work. I was out of town for 2 days and everything was working fine when I left. Got back today and just kept getting "unable to connect" message for any website I tried to open. I tried to download chrome and opera, but the download had an error and just didn't work (chrome) and just stayed at 0% with nothing happening (opera). i'm able to get emails and get on websites via internet explorer.

    Hello vtand06, did you also try a ''Clean reinstall'' ? This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b> Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Please report back to say if this helped you!
    Thank you.

  • Unable to log onto some sites using passwords etc

    hi all
    wonder if you could help me please
    i had an i touch for christma and love it but the only issue i have is the inability to log onto some sites that i have to enter my username and password for, even though i can log in perfectly fine on my regular computer!
    eveery time i try to access a certain site as soon as i enter my log on details , its starts to process then just goes back to the log on page again. i have tried loads of times but no luck!
    im able to log onto facebook etc and wondering if its because im trying to access an usa site but dont think that should make any difference!
    i have clicked the debug setting and when trying to log on it does come up with messages and one of which mentions something about a webkit and html issues!! and i havent got a clue what they mean of how to fix them!
    others that i know that also have iphones are able to log on, so any help gratefully received, thanks

    Hi graceandgirl,
    Welcome to the forums... The thing that I would like to bring to your attention is that the safari browser in the iPod is not near the equivilance of a regular computer.
    As it can't do flash or some advanced scripts, especially if requried by a the client (in this case your touch) to complete.
    Most of the main stream websites I've had no issues with, but again you will run into some issues. And if there are issues, only that website developer can fix them... There's nothing that you can do from your end, you just have to note the websites with this restriction.

  • Unable to connect to any site on iPad Mini

    My iPad Mini is connected to the net via WiFi. The settings page shows 'connected'. I am not able to access any site today. CloudOn, Skype, Mails, Safari, nothing is opening. Tried shutdown and restart, same result. Any help please? Thanks.

    Go HERE and see the section: "If you are unable to access the Internet while connected to a Wi-Fi network".

  • When I open firefox, the web address ishows my chosen home page but the window shows "untitled" and I am unable to connect to any site to the internet.

    I chose the New York Times site to be my home page and when I open Firefox this address appears in the web address panel. But in the tab box it says "untitled" and I don't connect to any web page. I have tried reloading firefox, nothing seems to work. How can I stop this?

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • Very slow / aborted connection to some sites. UK R...

    Hi all,
    For the past two weeks or so I've had awful connectivity issues to a variety of different websites, e.g.
    www.bbc.co.uk
    www.ebay.co.uk
    www.facebook.co.uk
    www.imdb.co.uk
    www.tesco.com
    yet other sites work perfectly well, These same sites are readily accessible via my mobile phones 3g connection, so I know it is not an issue with the websites themselves.
    I know there was a broader UK wide issue with BT broadband at the weekend, but this has been marked as resolved. Is there anything else that might be causing this issue? Routing or DNS issues perhaps, and how could I test this?
    It is not a general broadband connection issue as my home hub remains stable, and I can readily access newsgroups (astraweb and newsdemon) at full speed without issue.
    Thanks

    this link may help https://community.bt.com/t5/Other-Broadband-Queries/Cannot-access-BBC-or-Facebook/td-p/1309069 also the forum search may help
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Unable to connect SCUP to Site server unless launched as Admin

    Hello All!
    I am ran into a wall while installing SCUP on server 2012 r2. I was able to install SCUP with no problem but when I open option>Update Server>click on Enable publishing to an update server>click Connect to a local update server: Click "Test
    Connection I get the following error below. The only I get a succeful connection is if I launch SCUP as admin. This makes no sense because my account had all access to the server.
    Connection"  
    Phil Balderos

    Well, you don't need SCUP to get "in a compliance state". It may help you deploy some 3rd party or in-house app updates, but not needed for normal stuff.
    And if it works as admin, why not use that then? I did test SCUP on my Windows Server 2012 R2 install a couple of weeks ago, but I was using the domain administrator account and it published as expected.
    Wally Mead
    Thanks Wally,
    Yes we use it for 3rd party patching. We have a subscription to Shavlik and use that for Adobe, Google Chrome, Java, and several other apps.
    Patching 3rd party along with Microsoft updates is one of out audit points. The Microsoft updates portion works like a charm just the SCUP portion
    giving a little bit of trouble. I am reading some of the blogs and am in the process of reinstalling. One other bit left to configure is the certificate portion. I have very little expericne working with certificates but I found this blog.
    http://blogs.technet.com/b/jasonlewis/archive/2011/07/12/system-center-updates-publisher-signing-certificate-requirements-amp-step-by-step-guide.aspx
    Do you think this is a good start?
    Phil Balderos

  • I am unable to connect with any site using my iPad. "Safari could not connect because site is not responding"

    Safari is not able to open because site is not responding.
    I have an iPad 2nd generation .
    Version ios 8.2.
    capacity 12.5GB
    available 4.5 gb.
    I have tried turning the unit off then on. I have looked at settings but can't tell what to do there.
    Thia all started when I updated the last ios version

    Try Settings > General > Reset > Reset Network Settings. Enter your passcode.

  • Unable to connect to sensitive sites

    Evertytime I attempt to open my e-mail or any site with sensitive information, a page opens up notifying me that this site is untrusted. Even though these are sites that I visit everyday

    I've fixed this problem. I went to the Sun Java website and
    downloaded the latest version. Once that was installed, Contribute
    worked great.

  • Unable to connect to RACSIG site

    Hi Folks,
    I am not able able to coonect to www.oracleracsig.org since few days.
    Anybody has any idea what is the issue.?
    Regards,
    SangyD

    Hi,
    Actually the site is offline.
    Try sending an email to KP to know what is happening. If he answers you post it here.
    US & Canada Chair(s)-     Kamakhya Singh
    e-mail: [email protected]
    Regards,
    Levi Pereira

  • Unable to access some sites

    Hello,
            Over the past few days, when I use my smartphone (or computer) connected to the LAN (Verizon FiOS - Actiontec router - rev i), I am unable to get to some sites (s4gru.com or kwiksetkevo.com). The browser returns a "couldn't connect message. If I switch to my smartphone's LTE connection, I can connect to these sites without a problem.
    On both devices, I have tried to use DHCP, and then switched to a static IP (with Google's DNS servers) - no difference. I have been able to get to these sites till last week.
    I called Verizon yesterday, and they indicated that mxtoolbox indicates that my IP is blacklisted on SORBS DUHL & Spamhaus ZEN. They tried to reset/restart my router and give me a new IP, but my IP still appears to be the same. (phone call dropped, so couldn't verify that with the Verizon technician on the call).
    Reading at those sites, it doesn't look like my IP is actually blacklisted - spamhaus's site for example indicates that my IP (part of the IP range actually) is on PBL398013, and the FAQ for that states "The first thing to know is: THE PBL IS NOT A BLACKLIST. You are not listed for spamming or for anything you have done. The PBL is simply a list of all of the world's dynamic IP space, i.e: IP ranges normally assigned to ISP broadband customers (DSL, DHCP, PPP, cable, dialup). It is perfectly normal for dynamic IP addresses to be listed on the PBL.". So, I guess I'm not sure what the issue is.
    Here's the tracert result from my PC for s4gru.com.
    C:\Users\xx>tracert s4gru.com
    Tracing route to s4gru.com [50.28.75.70]
    over a maximum of 30 hops:
    1 <1 ms <1 ms <1 ms 192.168.1.1
    2 6 ms 6 ms 6 ms L100.DLLSTX-VFTTP-61.verizon-gni.net [<redacted for privacy>]
    3 9 ms 11 ms 9 ms G0-5-4-5.DLLSTX-LCR-21.verizon-gni.net [130.81.107.42]
    4 9 ms 8 ms 9 ms so-5-0-0-0.DFW9-BB-RTR1.verizon-gni.net [130.81.199.34]
    5 * * * Request timed out.
    6 * * * Request timed out.
    7 * * * Request timed out.
    8 * * * Request timed out.
    9 54 ms 34 ms 48 ms 0.ae1.XL3.CHI13.ALTER.NET [140.222.225.179]
    10 44 ms 41 ms 47 ms TenGigE0-6-0-0.GW5.CHI13.ALTER.NET [152.63.66.190]
    11 34 ms 34 ms 34 ms giglinx-gw.customer.alter.net [152.179.92.62]
    12 38 ms 41 ms 39 ms lw-dc2-core6-te9-2.rtr.liquidweb.com [209.59.157.226]
    13 38 ms 41 ms 40 ms lw-dc3-dist13.rtr.liquidweb.com [69.167.128.77]
    14 41 ms 39 ms 39 ms infsw01.invisionpower.com [69.167.128.68]
    15 * * * Request timed out.
    16 * * * Request timed out.
    17 * * * Request timed out.
    18 * * * Request timed out.
    19 * * * Request timed out.
    20 * * * Request timed out.
    21 * * * Request timed out.
    22 * * * Request timed out.
    23 * * * Request timed out.
    24 * * * Request timed out.
    25 * * * Request timed out.
    26 * * * Request timed out.
    27 * * * Request timed out.
    28 * * * Request timed out.
    29 * * * Request timed out.
    30 * * * Request timed out.
    Trace complete.
    C:\Users\xx>
    Tracert for kwiksetkevo.com goes thru' - after 15 hops, but I am still unable to connect to it when on the Verizon FiOS network (I can connect just fine on my smartphone's network)
    C:\Users\xx>tracert kwiksetkevo.com
    Tracing route to kwiksetkevo.com [64.73.140.55]
    over a maximum of 30 hops:
    1 <1 ms <1 ms <1 ms 192.168.1.1
    2 6 ms 7 ms 6 ms L100.DLLSTX-VFTTP-61.verizon-gni.net [<redacted for privacy]
    3 9 ms 11 ms 10 ms G0-9-3-2.DLLSTX-LCR-22.verizon-gni.net [100.41.202.74]
    4 21 ms 8 ms 6 ms so-5-0-0-0.DFW9-BB-RTR2.verizon-gni.net [130.81.199.36]
    5 9 ms 9 ms 9 ms 0.xe-3-3-1.BR2.DFW13.ALTER.NET [152.63.100.117]
    6 * * * Request timed out.
    7 60 ms 62 ms 58 ms 4.69.146.25
    8 59 ms 56 ms 59 ms ae-92-92.ebr2.Dallas1.Level3.net [4.69.151.166]
    9 60 ms 61 ms 59 ms ae-2-2.ebr1.Denver1.Level3.net [4.69.132.105]
    10 61 ms 53 ms 56 ms ae-1-100.ebr2.Denver1.Level3.net [4.69.151.182]
    11 63 ms 61 ms * ae-5-5.car2.Minneapolis1.Level3.net [4.69.136.109]
    12 46 ms 46 ms 46 ms BERBEE-INFO.car2.Minneapolis1.Level3.net [4.59.66.126]
    13 * * * Request timed out.
    14 43 ms 41 ms 44 ms g1-41.r-core-msp-a.binc.net [64.73.128.113]
    15 47 ms 46 ms 46 ms 64.73.140.55
    Trace complete.
    Help please!
    Solved!
    Go to Solution.

    I have a feeling this is a bad route, bogon issue vs a DNS issue.
    If you can access your router, do the following, and you'll hopefully be working in 5 minutes.
    Actiontec MI424-WR - RELEASE DHCP
    Click on MY NETWORK icon at the top.
    Select NETWORK CONNECTIONS from the menu on the left.
    Select BROADBAND CONNECTION (coax or ethernet) depending on your connection to the ONT.
    Click SETTINGS
    Click RELEASE
    Click APPLY
    Disconnect the router immediately to prevent it from re-requesting a DHCP lease ---- wait 5 minutes, and turn it all back on and try again

Maybe you are looking for

  • Issue in CVC Creation

    Hi Experts, I am trying to create CVCs but not able to do it. when I check in the log it gives 3 erors Characteristic value for characteristic XXXXXXX not filled Value AAAAAA  not contained in the master data table for XXXXXX No new characteristics c

  • Problem with udev during the boot

    Hi guys, Sorry if I didn't post this message in the good section but I didn't find any support section, so I supposed that this section was the most apropriate. So, I have a really ennoying problem with udevd since the latest kernel upgrade (3.2.2-1)

  • Problem with default namespaces

    Hello, I'm using version 2.3.10 of Berkeley XML. All my XML documents have a default namespace declared in the root element, like this: <rootElement xmlns="http://www....something.../something"> but I get errors when I query the documents - and the o

  • Least square circle calculation on a series of data points

    I am taking a series of (x,y) part measurements that describe a circle  (radius & rotation angle). The center of the part and center of rotation are offset. Looking for code to do a least square circle calculation on this data set so diameter and out

  • Time Constrains(ABAP-HR) module

    Hi Guy's, Please help me where exactly time constrains related information is stored(Table name). 2. Using HR_READ_INFOTYES FM it is possible to retrieve the OM related information also. 3. It is possible to add one field in  standard infotypes PSHD1