Unable to connect to SRW224P via web base and serial port on the front until reboot switch

Just installed new SRW224P switch 4 days ago and we lose connectivy to the SRW224P manage switch. Try to Web in to device and also direct serial port unable to get connected, reboot and it works for a little bit but then we loose connectivity again. Also the computers connected to the switch loose their IP address and sometimes unable to get a DHCP address assigned back from are server.
Any suggestions?
(Edited for guideline compliance.Thanks!)Message Edited by JOHNDOE_06 on 05-14-2007 09:20 AM

I ended up doing a replacement with linksys, the new one has been in place for 2 weeks and it seems to be running ok.

Similar Messages

  • Unable to connect to internet via the proxy - Proxy set up OEM 12c

    Windows server 2008 64 bit
    OEM 12.1
    I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
    But when I input my Oracle support credentials I get an error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
    test successful :
    https://updates.oracle.com was tested successfully using the Proxy.
    Go to set oracle support credentials error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    In the emoms.log file :
    2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  ).
    java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  )

    Please check the following section in
    http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
    Enabling Oracle Management Service to Access My Oracle Support
    Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
    At minimum, the following URLs should be made available through the firewall:
    aru-akam.oracle.com
    ccr.oracle.com
    login.oracle.com
    support.oracle.com
    updates.oracle.com
    About the dontProxyfor Property
    When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
    For example, suppose the following were true:
    You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
    You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
    You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
    In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
    http://support.oracle.com
    The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
    proxyHost=proxy42.example.com
    proxyHost=80
    dontProxyFor=.example.com, .example.us.com
    PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

  • HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

    i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

    GOT MINE FIXED -
    THE 7.0.3 update reported my iPhone as LOST or STOLEN  to Verizon.
    They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
    Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
    They said "we've been doing this ALL MORNING."
    Hope this works for others, too!
    You blow bright orange chunks, Microsoft, er, I mean, Apple.

  • I am unable to recieve media messages via text message and the profile says its not verified. How do i fix this?

    i am unable to recieve media messages via text message and the profile in the settings says its not verified. How do i fix this?

    MMS is a carrier feature.  Contact the carrier to ensure you account is provisioned correctly.

  • Unable to connect to iTunes/Apple Phone, iPad and Mac STATUS_CODE_ERROR

    Unable to connect to iTunes/Apple Phone, iPad and Mac  Apple Id Password
        STATUS_CODE_ERROR

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.

  • Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the

    Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
    Help?

    Did you check your security software settings?
    Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software.

  • Unable to connect hana with sybase replication server and i am not getting ECH plz help

    unable to connect hana with sybase replication server and i am not getting ECH plz help

    Please don't necrobump/hijack threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
    https://wiki.archlinux.org/index.php/Fo … _hijacking
    Closing

  • I have 8gb touch ipod (MC086C model) and i am unable to connect wifi BSNL however my iphone and laptop works well

    I have 8gb touch ipod (MC086C model) and i am unable to connect wifi BSNL however my iphone and laptop works well

    Well, it seems the problem I listed in my previous post (unable to wireless sync with iTunes 10.2) has resolved itself.  My iPhone now syncs wirelessly.  Happy for small miracles!

  • Unable to connect to database; verify that database TCP/IP port service is

    Hi i have a problem with a few servers when i'm trying to upgrade from SAP 2007 SP00 PL47 to SAP 2007 SP1 PL06, i run the upgrade for SBO-COMMON and gives me the message Unable to connect to database; verify that database TCP/IP port service is  started, and i don't know why, i hope you can help me.
    Julieta

    Hi,
    Ensure that the connection to the database is configured properly.
       1. Check that the TCP/IP port is not being blocked by a Firewall.
       2. Set the Server's Remote Connection to accept TCP/IP connections.
    Microsoft SQL Server 2005 -> Configuration Tools -> SQL Server Surface Area Configuration -> Server Surface Area Configuration for Services and Connections -> MSSQLSERVER -> Database Engine -> Remote Connections
    Restart the 'SQL Server (MSSQLSERVER)', and run the upgrade again.
    Hope this will resolve your issue !

  • Web cam and usb ports

    hii have problem my web cam and usb ports doesnt work i cant fine drivers fot tham.plz help

    hi ...
    I have a question to ask regarding webcam and java.
    . My web cam is connecting to computer via usb port.
    Is there a way in which i can get the media stream
    from the webcam which is then ready to be use by java?
    Or is there a way in which i can acess the stream data
    from usb port
    many thanks
    sunHi,
    You can try a package named: JTwain, which is available at http://asprise.com/product/jtwain.
    JTwain supports all kinds of digital cameras and scanners. You can use Java to access, contorl digital cameras and scanners, and of course, to acquire images with flexible settings.
    The developers' guide is available @ http://asprise.com/product/jtwain/devGuide.php
    In the simplest case, one line of Java code can solve your problem.
    Good luck!

  • I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file the email message will crash.

    I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file it fails and about 50% of the time when I want to send a standard text massage it will also fail and the email massage crashes. The only way I can get my Outlook to work is if I switch to Firefox web browser. I would rather not switch to a new web browser if I don't have to.
    It seems like what ever the problem is that its related the Safari web browser, because it works fine on the Firefox web browser.
    I think its some kind of plug-in failure because it giving me a LOC ERROR:
    LOC ERROR: Unable to locate localized string for resource ID 5007.
    How can I fix this Plug-in?
    And, yes my softwer is conpletly updated…

    That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

  • Connect a PIC/MCU micro controller to serial port of phone

    Hello,
    I am relatively new to j2me programming and i would lke to ask if it's possible to connect a MCU to the serial port of the phone and receive streamng data while the MIDlet is on?
    If so how can this be done> Does it work the same way a serial connection? I connect the MCU to the USB pins then to the mobile phone.
    Does anyone who have worked with this care to share their valuable experience? Thanks in advance.

    Hi, i checked with the helpdesk from motorola and they replied that i require a license to access the proprietary interface (please refer to the reply below). I'm thinking ofusing Sony Ericsson k610i since it's JP-7. However, I wonder if they have similar issues with it.
    It seems that since we are to interfacing with a PC, the allocation of a virtual port might be a problem, that'smy main concern.
    FAQ found in motorola website:
    We'd like to connect a RS232 device to a RAZR V3 phone. From a Java API perspective this is possible via the CommAPI.
    We have succesfully tested to connect the RAZR V3 Mini-USB with a PC via a USB-cable - and we were able to transmit data from the RAZR V3 to the PC (Hyper Terminal) and vice versa.
    Which technology is needed in the RS232 device (no PC - just a stand alone RS232 device) to communicate to the RAZR V3 via the Mini-USB?
    Answer
    We do not normally support the use of non-PC RS232 connections to current Motorola handsets. The only serial connection supported is serial-over-USB, where the handset is connected to a USB port on a PC, and the PC operating system assigns a virtual COM port to the USB connection for this purpose. Microsoft Windows is normally needed to meet this requirement.
    Although RS232 functionality exists within the handsets, it is a Motorola proprietary interface only available to firms who licence the technology from us. Motorola currently licenses the CE Bus technology to selected 3rd party companies interested in building accessories for our PCS devices. Please contact Gene Eggleston ([email protected]) or telephone 847-523-4976 (USA) for information on the license and business arrangement. As a licensee you will receive a specification that details the access and use of Motorola's CE Bus.

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

  • I have installed broadband tuner but i am unable to uninstall it ? plz help me and also tell me the i can bring setting of sysctl -a to default

    have installed broadband tuner but i am unable to uninstall it ? plz help me and also tell me the i can bring setting of sysctl -a to default

    drcul2008 wrote:
    have installed broadband tuner but i am unable to uninstall it ? plz help me and also tell me the i can bring setting of sysctl -a to default
    Why?  It comes with an uninstaller. 
    Contact the developer for uninstall instructions.

Maybe you are looking for

  • Chance of getting a contract with no credit

    Hi, so I recently ordered a 2 year contract along with a phone a couple hours ago. I also got the confirmation e-mail with the order number and everything included. But someone told me that there is a credit check, which I completely forgot about. Wh

  • Cannot Trash Dupe Video track in CS 5.x

    As part of my experiments in searching for the removed Clone Feather mouse/key combo (issue posted separately) I pressed Command-Option and naturally duplicated the sole video track in my PS timeline. First I tried Command Z to Undo. No repsonse. Tri

  • Create local user 12g DB

    Hi, I am trying to create a local test user  (DB 12g Win7 / 64) : SQL> conn sys SQL> alter session set container=PDBORCL; Session altered. SQL> show con_name CON_NAME PDBORCL SQL> create user test identified by test; ==> ORA-01109 : Database is not o

  • Hotspot VM - customize?

    Hi :) I have recently started playing a little bit with the Hotspot VM, but I have trouble replacing the standard Hotspot with my custom one. I am using Hotspot 2.0 on a Solaris 8/SPARC box. I downloaded JRE 1.3.1 and tried to replace the /lib/sparc/

  • Any reader for DRM epubs on a Windows Surface 8RT machine?

    I installed Adobe Content Reader, but it won't let me log into my account.  Any Help out for us windows users? Thanks