Unable to connect to system thru gui...
hi,
please help me in this error which frequently occuring connection to host xxx,service sapdp02 timed out, how to solve this and where do i look into to.
thanks in advance..
shash.......
Hi
1. Check whether the client system is connected to the server by pinging the application server.
2.,Check the entries given in SAP GUI ( App server string, Sys id, Sys no) are correct.
3. Try to login to sever thru Start -> Run -> type sapgui <servername>.
4. Try re installing SAP GUI
With regards
Karthik
Similar Messages
-
I'm unable to connect to database thru cold fusion
I'm unable to connect to database thru cold fusion. it
sometiems give me an error that your uname is undefined , soemtimes
it gives ur index page not found so i created index page also but
still im unable to connect to database n update my records..plz
help me out..im a fresher in cold fusionI am having a similar problem having CFMX 7.02 verify my SQL
Server 2005 Data Sources.
I am using the sa account for CF to access the db's. But i
get the following error:
Connection verification failed for data source: myDatabase
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket. Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket.
Connection refused: connect
Every role in SQL Server has the sa grantor Grant enabled. I
can also login to SQL Server with the sa account w/o a hitch.
I don't know what else to do. The server information is set
to the ServerName port 1433, datasource name and database name are
the same as the database name in sql server, and the username and
password are set for the sa account.
Thanks! -
TS1368 I'm unable to connect to iStore thru a proxy server (port: 8080)
I connect to internet thru a proxy server (port: 8080) but I'm unable to connect to iStore or any most of the other applications. I would like to know what is the port no. thru which these apps operate? Pls help me connect...
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Unable to connect SQL2008 system
Dear All,
I am trying to connect to SQL database 2008 system at receiver side.
for this I have used Business Service and configured the JDBC adapter at receiver side.
Do I need to make configured Busniess System in SLD?
I am using
JDBC Driver: com.sap.nwmss.jdbc.sqlserver.SQLServerDriver
and
connection string=jdbc:nwmss:sqlserver://iltlvsap99:1433;DatabaseName=BPV
is the correct parameter ?
when I am testing this scenario
I am getting below error in RWB
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:nwmss:sqlserver://iltlvsap99:1433;DatabaseName=BPV': SAPClassNotFoundException: com.sap.nwmss.jdbc.sqlserver.SQLServerDriver
Please advice.
RegardsHi Abhay,
Check Raja's reply in Re: Cannot connect to SQL 2008 using jdbc adapter. . Your connection parameter doesn't seem correct. If it doesn't work even after correcting the parameters, then check if the sql driver is properly installed or not.
Regards,
Sunil Chandra -
Unable to connect to net thru OVI
Hi there
I am unable to sign in to my account thru ovi, Iam using win xp sp2.
pls helpHi xDesertDragonx
I am not getting any error message, it simply sits there. In Edit/options in proxy settings and LAN setting Automatically Detect settings is selected.. Also please see the attachment where in the bottom left hand corner, rounded circle with is shown for a while then it sits idle.
Thanks
Attachments:
nokiaovi.JPG 125 KB -
Unable to connect using system after installation...
Hello,
I'm running Fedora (core 7) and have installed "oracle-xe-univ-10.2.0.1-1.0.i386.rpm" (universal). I've configured it with all the defaults.
I can navigate to the "home page" but whenever I try to login I get an error saying "invalid username/password". My password is test and I've tried with username "SYSTEM", "SYS", "system", "sys".
All of this is being done as root (the install was also done as root).
Anyone have any idea what's happening here???
Thanks!Try following command , reset password and try
su - oracle
cd /usr/lib/oracle/xe/app/oracle/product/10.2.0./server/bin
# on bash or ksh
. ./oracle_env.sh
sqlplus "/ as sysdba"
alter user system identified by test;
- Virag Sharma
http://virag.sharma.googlepages.com/ -
Have been using Firefox for a number of years. About two weeks when I attempted to access a bookmark through Mozilla I got an unable to connect. Have tried multiple things including removing and reinstalling several times. Each time I attempt to got to a site I receive a "Firefox can't establish a connection to the server at www.X. I'm offered choices to retry; check network connection or check Firewall or proxy and make sure Firefox is permitted access to the Web.
To the best of my knowledge I made no changes to the access. I am able to reach the internet via internet explorer and can reach the sites that Firefox is denied. I've tried playing with the internet connection settings but to no avail.I, too, have used Mozilla/Firefox for yrs and like it very much. After some security issues and my security company worked on the issues, Mozilla/Firefox disappeared from my screen. I'm getting the following when I try to download:
C\user\Lee\App Data\Data\Local\temp
7zEEEE.temp\set up. exe
D:users\Lee AppData\Local
Temp\7zEEEEtemp.\setup.exe
This system could not find the environment option entered.
Might someone be so kind as to help me please?
Thank you,
Leeflea. -
My C670 ESA's have been throwing these alerts intermittently for the past few days, anyone else seeing them?
The Warning message is:
Unable to connect to Cisco Web Security Service.
URL Filtering will not work correctly.
Please verify all network, proxy and firewall settings.
Connection to "v2.sds.cisco.com" failed.
The last error seen on this connection: "Request failed with code: 28 (Connection time-out)"
Version: 8.5.6-092
Looks like it is open on port 443 and currently up. Hitting it with a browser gives me:
https://v2.sds.cisco.com/
After an error or two they go away and appear OK.
Checking the logs I don't see a way to verify URL lookups are working, is there a way?
Also, I setup URL filtering six months ago and had it set to only trigger on (-10)-(-9.5) and saw about an 80% false positive. It has improved over the past six months drastically but still catching mostly advertising URLs and allowing all phishing URLs right through. I've yet to see it block a phishing URL.
JasonAfter lots of trial and error, I was able to eliminate this problem. What I wound up doing is defining the XE service again in the listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server)
I know that typically you should not have to do this, especially since I already had defined DEFAULT_SERIVCE_LISTENER = (XE) at the bottom of the listener.ora file. Explicitly defining the XE service in the listener.ora file allows the listener to find it while the system is running under the Cisco AnyConnect VPN. The only hiccup I found by doing this is that the XE service is discovered twice by the listener when the system is NOT running under the Cisco AnyConnect VPN. It still works OK. The listener just seems to ignore the repeated definition of the XE service (see output below):
C:\ProgramData\oraclexe\app\oracle\product\11.2.0\server\bin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-JUN-2013 10:03:15
.......(omitted output).......
Service "XE" has 2 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: DEV-M-137GF, pid: 5544>
(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=58257))
The command completed successfully
If anyone has a cleaner solution for this problem, please let me know. Otherwise, I am moving forward with what I did.
Thanks.....Paul -
Unable to connect to bose system
New Iphone 5 unable to connect to car phone or bose system, no problems with Iphone 3g.
Thank you! It worked!!
-
HTTP Response :500 unable to connect to remote system.
Hi,
I am doing proxy-xi-file scenario, where i am getting this error in sxmb_moni in R/3.
The error reads with red flag:
HTTP Response :500 unable to connect to remote system.
Please tell me what can be the reason.Snehal,
Error: The error message 503 Service unavailable Application stopped! is displayed.
Description: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
You can have a look on this blog for the same.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Sarvesh -
Unable to connect to BI System from Visual Composer
Hie there,
I am unable to connect to my BI system from Visual Composer
The error message which I obtain upon clicking on 'Find Data' and selecting one of the many Systems list are as follows :-
Error - 30014 Search returned an erro Failed to conect to backend system. Check your system defination and user priveleges.
Please advice how can I add a BI System to this Visual Composer
p/s: I`m new to portal environment, hence please excuse my rudimentary questionHi John,
you find some information under:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm</a>
I had a similar question as a comment for my blog here:
<a href="/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i:///people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
You should also look in the VC wiki, there is a section for the connectivity
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
Hope that helps!
Best Regards,
Marcel -
I am unable to connect to the itunes store to update apps on my ipad.
I have tried both wifi and cellular connections.
I have the most recent updates of the operating system and itunes.
I have powered down and reset and restored.
I have no problem purchasing and downloading new apps or songs.
Please help!Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368 -
since upgrading to LION unable to connect to wifi, in system preferences it says wifi off - cannot override it, what should i do?
While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion
-
We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issueI have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me. -
Error: unable to connect to database using user system. please check privil
Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
RajaDid you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai.
Maybe you are looking for
-
when i went to charge my ipod it wont charge, so i pluged it into my computer and still the same thing pops up its a plug then an arrow pointing to a zig zag line..
-
B2 Error: B2B-50029: B2B runtime error
Hi there, I'm pretty new to the Oracle B2B world and I'm having problems making a simple sample that receives, changes some parameters in the message (using BPEL) and forwards the changed message to a designated endpoint. The message is received succ
-
May have overlooked it, but is there anyway to have a lightbox open on page load rather than just on a trigger? Thanks for any help!
-
Any ideas on restricting userID Role Assigment within the SAP Security Team
Hello, I have gotten a request to look into restriction of assignment of roles to oneself within the company SAP Security Team. Thoughts I have come up with so far involve the use of UserID User Groups, Role Assignment Ranges, and forcing all role as
-
My sent folder in email only shows my sent items from my black berry, nothing from my IPAD 2. How do I change this to be a folder that represent sent activity from the IPAD?