Unable to connect to the CDDB using iTunes 10.6.1.
When I put my CD in and try to get the track names, I get this error:
Unable to connect to the CDDB server. the network cannot be reached.
The internet is fine, I checked the firewall and I unistalled/ reinstalled iTunes, but this error keeps popping up.
I was able to connect late week and retrieve track names, but yesterday and today the same error. Any suggestions?
I have same problem but I am on a PC. Everytime I try to get track names I get the CDDB server error. I have an interenet connection and can upgrade itunes (which seems to me that the application knows I have an internet connection) but I continue to have problems with track names and it seems artwork as well.
Similar Messages
-
I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Unable to Connect to the internet using airport extrteme
I am unable to connect to the internet using airport extreme It was working fine with my G3 & G4 iBooks but now I am unable to connect. I am able to connect directly to my Desktop connecting directly using ethernet. I am also receiving a strong signal from the airport base station. Please help. Thank you.
Try the following, in order, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AirPort Extreme Base Station (AEBS), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset." -
I have time capsule and I am unable to connect to the internet using static public IP
I have been using my Time Capsule on my company network for some time.
Recently I removed the time capsule and connected the TC Wan port directly to the firewall. We have got block of static IPs provided to us from our ISP.
Im confused in filling up the internet tap on the Airport Utility (Lion Version)
If Im using a static public IP to connect to the internet should I use
Static, DHCP or PPoe?
IP Address: is this the IP address of the public IP address given to Us from ISP?
Subnetmask. ..no problem
Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
DNS servrs are clear...
Please guide me.Normally you would just set this up with dhcp to the firewall.. if the firewall is setup correctly it will simply pass you one of the block of static IP addresses.. if it doesn't or get a NAT address you should be able to allocate a static IP to the TC in the firewall to its MAC address.
I am not sure that the static IP will work if you just type it in.
If you want to have a go..
If Im using a static public IP to connect to the internet should I use
Static, DHCP or PPoe?
Try static only if dhcp doesn't work because the firewall is not setup.
IP Address: is this the IP address of the public IP address given to Us from ISP?
Yes, a free IP from the block.
Router Address: what should I type here: IP address of my firewall or my ISP's GateWay IP?
Either should work if the firewall is setup correctly.. otherwise just try ISP gateway. -
Unable to connect to the database, using SCAN in 11gR2
Hi ALL,
I am in big trouble, I am working on 11gR2 4 node RAC database, and 1hr ago i have bounce the database for some issue. It came up and working fine for me, when i am connecting from the server. but the users (Performance team) who are connecting from application, it is not able to connect with SCAN address. we haven't changed any thing at the DB level or at OS level. and even i is not connecting from SQLDeveloper. It is thronging error message saying that "IO Exception: The network adopter could not establish the connection"
What are the things i need to check, Please give me your valuable suggestions and all of the application team is waiting for this issue to be resolved.
2 days ago, we have added 4th node to the existing 3node RAC. Is that given any issues.
below are the things i checked.
$->srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node qysqalccoredb01
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node qysqalccoredb03
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node qysqalccoredb02
$->srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node qysqalccoredb01
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node qysqalccoredb03
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node qysqalccoredb02
why it is not running on 4th node.
Also i have updated the SCAN info by resetting the local_listener parameter to use the scan address.
alter system set local_listener='(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=host-vip.ieptc.intuit.net)(PORT=1521))))' sid='sid1' scope=both;
do i need to do the below one as well.
alter system set remote_listener='scan-domain-name.example.com:1521' scope=both sid='*'
Please help me and thanks in advance.Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Grid Computing » Real Application Clusters
which you can get more quick response
Regard
Helios -
I have spoken to my ISP (Sky) and they haven't got a clue.
I cannot connect to iTunes/AppStore on any of my 3 devices (iPhone/iPad/MacBook) when connected to my home broadband yet I have no issues over 3G on my iPhone.
I also cannot play YouTube videos on iPhone/iPad via the app or the website but have no issues on my MacBook. I have done all of the usual things like rebooted devices, reset network setting and all settings. I would restore but that isn't going to go so well if my MacBook won't talk to iTunes is it?
In all my years I have never had an issue like this before, it HAS to be down to my ISP right?
Any advice will be GREATLY appreciated, thanks.Thanks for the reply.
So far I have reset and rebooted my router, the firewall is as default, no blocked sites etc
Sky don't have a clue what I'm talking about so can't really help me.
Just don't get it :( -
The message also states that I should check the proxy settings to make sure thaey are correct-I have no idea what this means,and says also to contact the network administer to make sure the proxy server is working.This is my home computer so I guess I am the administer.If it is any help I run system mechanic 10.5,but cannot find anything in system mechanic that I recognize as helpful.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I am unable to update my software in settings, just says an error occured. I am alsos unable to connect to the app and itunes store. (no error message occured) just says unable to connect. I am using cellular data and its turned on. Help me please
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
ITunes "can't connect to the CDDB server" for tracks on a CD (but can once I've imported them)
When I insert a CD into my computer, iTunes cannot get the track names before importing, I get the "Unable to connect to the CDDB server. The network cannot be reached." Bizarrely, however, once I import the tracks onto my PC and ask iTunes to 'Get Track Names' for the files in my library, it can do it fine. I am also able to access the iTunes Store without trouble.
Also, in what I'm sure is related, the Apple Software Update program does not work anymore ("The server could not be found"), so I've to manually download new versions of iTunes from the Apple website.
I've had this problem for months, and I've tried pretty much every solution I'd seen posted for similar problems (reinstalling iTunes, disabling my virus protection, updating Gracenote, ensuring the proxy settings are automatic) with no success.I've just tried putting my computer into Safe Mode (with netwroking) to check if there was some other program stopping it from working properly, but iTunes still acted the same. It's more of a minor inconvienience than a problem, seeing as I can just get track names after importing and update manually, but it's still pretty baffling.
-
I am unable to connect to the iTunes/App stores.
I have been unable to connect ot the Apps store/iTune store for a couple of days. The messsage received is that I should check all network connections and try again. Done - and nothing wrong. I have downladed, via software update , the latest iTunes version but the issue still persists. Can anyone suggest the solution please.
I am having exactly the same issue since upgrading to 10.5. Cannot access the store. Cannot purchase. Get an error tell me to check date and setup. I follow instructions. Nothing wrong but still does not work. Help please.
-
Unable to Connect to the database in RCU, Oracle11g XE on Laptop/Windows
Software downloaded unzipped and installed from OTN
OBIEE foundation 11.1.1.5
Repository Creation Utility 11.1.1.5
Oracle Database Express Edition 11.2
Issues
1. I installed Oracle 11g express edition. I am able to start/stop and run sql against the database however the homepage ("get started " accessed from Start > Programs > Oracle Database 11g XE > Get Started) does not work. This i will post in a separate thread but I am writing this anyway just in case it has some relevance.
2, This is the one I need help with. Can you confirm that these are the parameters when I hit the "create" option in RCU because I get the error message saying I cannot connect.
Hostname:This is the same as the hostname, when I go to cmd prompt like below
C:>hostname<enter> That is what I am using.
Port and Service :Can you confirm, Port = "1521" and Service = "XE". 1521 is the Database listener port when I installed Oracle 11g Database Express Edition. I am not putting the quotes in the boxes in the RCU.
Should the service be OracleServiceXE - i have tried it but does not work.
Anyway I get this message:
Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.
Any ideas appreciated.
By the way My lsnrctl status returns the following: (meaning the listeners are up!0
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\dir>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 13-MAR-2012 13:44
:03
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 13-MAR-2012 10:55:11
Uptime 0 days 2 hr. 48 min. 51 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\myspecifichostname\listene
r\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=myspecifichostname)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=myspecifichostname)(PORT=8080)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Edited by: ideakat on Mar 13, 2012 1:57 PMHi,
Like Abhi said, check your tnsnames.ora file to check the port number and service name is correct or not for the Express Edition database you have installed.
and when you are running RCU installer, Please give system adminstrator account of OracleXE like 'sys' or 'system' account with confirmed port number and service name.
Hope this helps.
Regards,
Bose
Edited by: Bose on Mar 16, 2012 11:42 AM
Edited by: Bose on Mar 16, 2012 5:35 PM -
Computer software update tip I tunes is temporarily unavailable, unable to connect to the itunes store .How to solve?
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!
Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085
-
I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone
Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.
-
When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.
Maybe you are looking for
-
How do I stop my itunes video playback from skipping
We just bought a full season of a show and while trying to watch it the video playback is either really slow or it stops and skips while the audio keeps playing. Any suggestions how to fix?
-
New SAVE AS Dialog Box "Feature"
What's up with the new feature that changes the name of the file you're saving... or exporting... to the name of the file you click on in the Save or Export dialog box? It's a terrible feature that causes more problems. One mis-click and you're savin
-
How to store data from Host.vi in cRIO-9074
TejasKumar Patel I implemented a advance Measurement and Control system using cRIO-9074 with c-Series I/O cards( NI 9217, 9411, 9264) I have some questions about it, (1)- Data rate from FPGA targate to host vi is too low. how can I increase it, when
-
Header 1 Header 2
-
Hi, Please find below my test code for printing a JPanel.However, the problem is that part of the first page at the bottom and first line is clipped.I have tried my best to find the problem but to no avail. I want to print the whole JPanel since more