Unable to connect to the Essbase server from Admin console

Hi,
I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
"Unable to connect to the Essbase server please check the user name & password"
username: admin
password; password.
i tried several times...but its not working.
Please advise me.
FYI, The admin server service is started already.

Hi Subrahmanyam,
Here , there are 2 things
1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
admin
password
2. After you are connected to the console i.e admin console .
You see
enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
In step 1-> to connect to console , use 'admin' 'password'
In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
Hope this clarifies you, as this is a lil confusion to many
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Similar Messages

Unable to connect to the report server from FORM in 10g

Just I start to create Forms and Reports .
Final step I try to put Button in Form Report to call Report but this job I have not do it before just I try it by my seftstudy to do.
However, i get message error i will show you to see which mistake i have done.
this picture error message:
http://img136.imageshack.us/img136/5830/errr11ex.gif
this picture paht of Report after import it in Form builder:
http://img146.imageshack.us/img146/4381/tree9eb.gif
this picture show the setting of properties in Report:
http://img501.imageshack.us/img501/3999/agent4nz.gif
this is my code :
declare
report_id report_object;
report_message varchar2(1000);
p_id paramlist;
v_rep VARCHAR2(100);
begin
report_id:=find_report_object('agent');
v_rep := RUN_REPORT_OBJECT(report_id);
report_message := run_report_object(report_id , p_id);
web.show_document('http://orcl:8889/reports/rwservlet/getjobid'|| substr(report_message, length('svr')+2)||'?server=svr');
end;
Can any one try to tell me what the mistake in my code and how to solve it?
My best regards;
Message was edited by:
ExplOrer

Hello !
You can try to use only the web.show_document call
WEB.SHOW_DOCUMENT('/reports/rwservlet?report=agent.rdf&destype=cache&desformat=htmlcss&server=srv&userid=you have to enter your username/passwort@database net name here,'_blank');
Have you defined the path for the stored reports ?
Try to locate the registy key REPORTS_PATH in the registry and add the root C:\project\reports . to the key
Katharina

SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/

Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

AzCopy worked, suddenly stopped working, unable to connect to the remote server

AzCopy was working fine, I was transferring about 670 files to my Azure Files storage account on "https://blah.file.core.windows.net/myshare" (that's not the real account), then it stopped after about 400 files.
Now it continually gives the error "Error parsing destination location
https://blah.file.core.windows.net/myshare: Unable to connect to the remote server."
However it works from a different computer with a completely different IP address in another part of the country.
I am 100% sure my azcopy command is correct, because it worked for about 400 files then stopped, and the exact same command no longer works. I have tried it with both the primary and secondary keys. I've uninstalled and reinstalled azcopy 4.1
and that doesn't help.
Is Azure blocking IPs somehow? What could be wrong?

Hi,
I am glad to hear that you have solved your issue, thanks for posting, if you have any difficulty in future, we welcome you to post in forums again.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Server cleanup wizard problem - unable to connect to the WSUS Server Database.

I'm trying to run server cleanup wizard.. it starts to run and then after a while it gives me this error:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated.
Source
.Net SqlClient Data Provider
Stack Trace:
   at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
   at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.InitializeDerivedProperties()
   at Microsoft.UpdateServices.UI.AdminApiAccess.WsusSynchronizationInfo.get_NewUpdatesCount()
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetSyncInfoRow(WsusSynchronizationInfo syncInfo)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.SyncResultsListPage.GetListRows()
Thanks

Some questions:
Are there any other databases running on this Std Edition SQL service?
[a] Yes there are, we have Kaspersky enterprise DB, Report Server DB and local application DB.
Are there any other services running on this WSUS Server?
[b] Yes there are, we have Active Directory, Kaspersky enterprise, SQL Server 2005, and WSUS all on the same server.
How many days since your WSUS server was first installed?
[c] It's been about a year now.
What is the physical size of the SUSDB.mdf file?
[d] 9,666,752 KB
What is the hardware configuration of this machine, including disk drives?
[e] Intel Xeon 1.86, 2GB Ram, HD C: 39GB - E: 25.2, running Windows Server 2003 R2 SP2.
How many client systems are you servicing from this WSUS Server?
[f] Around 40.
What products/classifications are you synchronizing.
[g] Windows XP-vista, Windows Server 2003, Office 2003-2007, SQL Server 2005.
Okay, for starters, you have an underpowered/overextended machine running Active Directory, ASP.NET, and a database server, all on a sub 2GHz CPU with 2GB RAM, and not enough disk spindles. The machine has had WSUS running for about a year and is 9GB in size.
There's no doubt in my mind that some of your performance issues are directly related to disk and database fragmentation.
There's also no doubt that some of your performance issues are directly related to memory starvation.
I'd suggest the following long-term fixes:
1. Get a second machine. Make it a dedicated database server. Provision it accordingly to support servicing multiple database applications.
2. Lacking #1, this machine needs more memory. It also needs more disk spindles. At a minimum the databases being serviced should be on a dedicated physical drive; ideally there would be two dedicated drives allocated for supporting database services. The
For the short-term fixes, do this:
1. During after-hours time, if you don't already have one, build a temporary machine that can act as a DC/GC, while you take this machine temporarily offline.
1. Shutdown the Update Services service, SQL Server database engine, and any other services dependent on the SQL Server database engine (Kapersky, and other reporting applications). Disconnect from the network to temporarly eliminate DC traffic. (You could also shutdown the AD services, but disconnecting the network cable is ever-so-much easier.) Defragment ALL drives.
2. Restart ONLY the SQL Server service. Obtain this SQL script to Reindex the WSUS Databases.
3. Restart ONLY the Update Services service. Attempt the Server Cleanup Wizard again. Run it in two passes. Pass 1 performing everything except remove unused updates. Pass 2 running only remove unused updates.
4. After completion of the Server Cleanup Wizard, reconnect the machine to the network and resume all other services.
5. If you're able to complete #3, secure the services of a well-qualified DBA to determine if there are any misconfigurations in your SQL Server setup that would account for why your WSUS database is 9GB in size -- such as improperly configured autogrowth parameters. Based on the products you're updating and only forty clients, 9GB is about 3x the maximum size I would expect to see in a WSUS database. It's possible this is simply caused by excess unused updates, it's possible it's caused by fragmentation, it's probable it was caused by unnecessary autogrowth of the database due to insufficient update maintenance. You'll want a DBA to assist you in shrinking that database after you successfully run the Database Maintenance and Server Cleanup Wizard.
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

Unable to connect to the report server

I have a problem with run_report_object to call a report within a form. I am using 9ias Rel 2 and report server on the same machine. The test.rdf report can be executed using the URL in the browser.
I get the "Unable to connect to the report server" when I use the run_report_object in a form. Is it a configuration problem or is the code incorrrect?
My code is as follows:
Declare
repid report_object;
report_job_id VARCHAR2(200);
PL_ID PARAMLIST;
rep_status varchar2(100);
Begin
repid := FIND_REPORT_OBJECT('OP201P');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'repsrv');
PL_ID := CREATE_PARAMETER_LIST('TEMP');
ADD_PARAMETER(pl_id, 'p_ref1', TEXT_PARAMETER,:toolbar.ref1 );
ADD_PARAMETER(pl_id, 'p_ref2', TEXT_PARAMETER,:toolbar.ref2 );
ADD_PARAMETER(pl_id, 'p_sort', TEXT_PARAMETER,:toolbar.p_sort );
report_job_id := RUN_REPORT_OBJECT(repid, pl_id);
rep_status := REPORT_OBJECT_STATUS(report_job_id);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := REPORT_OBJECT_STATUS(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
Web.show_document('http://portal.domain_name.com:7778/getjobid='||
substr(report_job_id,9) || '?server=repsrv', '_blank');
ELSE
message('Report failed with error message '|| rep_status);
END IF;
end;
For the show_document, I have tried both ' .. getjobid='|| substr(report_job_id,9)' and
' .. getjobid'|| substr(report_job_id,9)' .
Any help would be greatly appreciated.
Thank You.
Rgds
Edwin

Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link.
Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link if doesn't work from above.
http://msdn.microsoft.com/en-us/library/ms365170.aspx
Regards, PS

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Unable to connect to the analysis server the server name was not found

Hi,
One of the user is trying to run reports from PWA 2010 and gets the below error.
Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
Please advice why?

Dear Project Help,
Please help the community with more information.
Which kind of reports are you running? Excel using OLAP?
If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
Let me know if you need any help on this.
Cheers

Power Query online search: Unable to connect to the remote server

This is the error I get after I click add to worksheet. I see th preview of the data. I am in an enterprise behind a proxy if that helps.
[DataSource.Error] OData: Request failed (ConnectFailure): Unable to connect to the remote server
Stephen

OData is a web service and so long as you can access it from your current network context, it'll work. Home, Internet Café, Hotel, Airplane -- doesn't matter. If the data source is private and is on a restricted network (like some sort of private data analysis
source internal to your company), then you will need to VPN into that network before you attempt to refresh your data.
I have noted some basic steps in my blog that might help you setup the basics and verify with a known publically available OData source.
http://bariseris.wordpress.com/2014/10/27/using-excel-power-query-to-track-your-citys-progress/

The client timed out waiting to connect to the Essbase Server using TCP/IP

Hi,All
When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
     at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
     at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
And the Essbase service is up.
Pls help!
Shen.

If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
Tim Tow
Applied OLAP, Inc

Unable to connect to the Linux server - getting a message - username and pa

Hello,
I am unable to connect to the Linux server - getting a message - incorrect username or password . I have used this number of times and I am sure I am using the correct username and password.However, I tried to log in this time after few months to the Enterprise linux server and got this message. I have the VMware version 2.5.0 build-122581. I am using the Enterprise Linux 2.6.9-89.0.0.0.1.Esmp OS to use the Oracle EBS R12 off it. When I click the console in the VMware it starts the Linux. While it is at the 'Network starting, stage it shows 'Determining IP information : Failed' and few lines down the line 'starting smartd': Failed as well, while others are ok. I suspect these are cause of the message 'Incorrect username or password'.
What may be the issue? How do I resolve it?
Any urgent help would be highly appreciated.
Arunasish Sircar

Hello Hussein,
I cannot copy paste as I already mentioned. However I am just typing it from the text that I see - bottom few lines.
Root Services Enabled
Root Service Oracle Process Manager for PROD_linux adopmnctl.sh started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
Web Entry Point Services Oracle OracleTNSListenerAPPS PROD_linux adapcctl.sh failed
Web application Services Enabled
Web application Services OACORE OC4J Instance PROD_linux adoacorectl.sh failed
Web application Services FORMS OC4J Instance PROD_linux adfomsctl.sh failed
Web application Services OAFM OC4J Instance PROD_linux adoafmctl.sh failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPROD_linux
adcmctl.sh started
Batch Processing services Oracle fulfillment server PROD_linux jtffmctl.sh started
Other Services Disabled
Other Services OracleFormsServer-Forms PROD_linux
adformsrvctl.sh disabled
Other Services Oracle Metrics Client PROD_linux
adfmcctl.sh disabled
Other Services Oracle Metrics Sever PROD_linux
adfmsctl.sh disabled
Other Services Oracle MWA Service PROD_linux
mwctlwrpr.sh disabled
Service Control is exiting with status 4
I hope you can let me know how to resolve it.
Thanks,
AS

"Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type:        Error
Event Source:    Office SharePoint Server
Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.

Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog

Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
1. Login to the ColdFusion Administrator
2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
4. Restart ColdFusion Application Server
Notes:
a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it." However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition). Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
Attached is an image of the error.
Just posting all of this as an FYI, in case it helps anyone.
Thanks!,
-Aaron Neff
(OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
I'll try to describe the error message window:
- It is 494x452 pixels
- Title of the window is "Error occurred while launching the Debugger"
- Body content of the window is as follows:
Unable to connect to the RDS server 'ServerNameHere'
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error Message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connect refused: connect

hi,
I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
Diagnostic report shows failed on the connectivity part
Connectivity
mx-direct Failed
0:00:00.719 Connecting to web331.oracle.com:1025
0:00:00.922 Name resolved to 148.87.108.234
0:00:21.906 connect() failed (0x8007274C)
0:00:21.906 Connection failed (0x8007274C)
Pl help me to fix the problem.
Regards
Gobind Ahuja

Unable to connect to the Essbase server from Admin console

Similar Messages

Maybe you are looking for