Unable to connect to the MS Exchange server after upgrading to ios 7.1.2

I received a new iPad 4 through work.  Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server.  Contacted IT through work, they have no idea how to correct it.  They say all of my settings are fine.  The error message says "Cannot Get Mail   The connection to the server failed."  Any thoughts?

Appears to be a wifi connection problem. Did it work prior to the iOS update?
Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Since it's a company wifi, you won't be able to do many of these.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Can't sync with exchange server after updating to ios 5.1.1

    I can't sync with exchange server after upgrading to ios 5.1.1. have restored and reset phone and also have deleted the account and added back in; still no luck

    +1// help

  • IPhone 5 not connecting hotspot via USB to Macbook after upgrade to IOS 7.

    My Macbook can only get internet hotspot net through wifi or bluetooth but unable to connect via USB and this happen after upgrade to IOS 7.0.2

    You do not want to try to sync photos back from a computer that you do not sync with. That will erase everything from the phone. The pictures you downloaded to the computer do not go back to the camera roll. They are part of the iTunes sync process now. Take and put them on a CD or flash drive, put them on the computer at home and then sync them back via the photo tab in iTunes.

  • SCVMM 2012: Unable to connect to the VMM management server localhost:8100

    Hi everyone
    I have difficulties connecting with the Admin UI to the SCVMM server running on the same machine. This is the error message I see:
    Unable to connect to the VMM management server localhost. The Virtual Machine Manager service on that server did not respond.
    Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running.
    Then try to connect again. If the problem persists, restart the Virtual Machine Manager service.
    ID: 1602
    I checked that the service is running and checked with the Resource Monitor that vmmservice.exe is really listening on port 8100. The Resource Monitor also shows some traffic between itself, the service and the DC. But all traffic dies down after a few seconds,
    then nothing happens for a minute, then I get the above error message. The only SCVMM related entry in the eventlog is this (was logged when I manually tried restarting the service):
    Failed to stop service. System.NullReferenceException: Object reference not set to an instance of an object.
    at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStop()
    at System.ServiceProcess.ServiceBase.DeferredStop()
    But I guess that entry is of no help. Other important things that might be relevant:
    This installation worked fine three months ago. Since then only the automatic updates were installed.
    DPM (the 2012 CTP for Win8) is installed on the same server.
    After it didn't work I installed SQL Server 2008 R2 SP1 (offered by Microsoft Update)
    SCVMM is part of a small test installation (~10 VMs or so), no valuable data, so there's no risk when messing around
    Control panel shows the version number 3.1.1042.0 for "Microsoft System Center 2012 Virtual Machine Manager".
    Is there anything else I could try? How can SCVMM stop to work, all by itself? Leaves a sour taste...
    Cheers,
    Simon

    When such odd behaviour occur, it is a good tip to start a VMM trace to see where things are actually going wrong. And suck files is interestin for MS support once the obvious things for errors, are eliminated out of the picture.
    VMM has dependencies such as SQL, permissions and service accounts. All of these variables does
    also have dependencies that should be verified. Verify that the account for the service does is not locked/expired pwd, that the SQL is up and running - and actually is working. There is a lot of logs to check in order to determine the root cause of
    this behaviour.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • [Security:090314]Entitlement Engine unable to connect to the embedded LDAP server

              I rebuilt the server and I still can't start cluster server but got a different
              error message. Any thoughts? (Migrating from Weblogic 6.1 to 8.1)
              =============================================================================
              LD_LIBRARY_PATH is:
              /usr/openwin/lib
              /usr/dt/lib
              /usr/lib
              /usr/local/lib
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris/oci920_8
              /opt/rv/lib
              /bin/Solaris <not found>
              /opt/BPARun1.0_A0/lib
              =============================================================================
              CLASSPATH is:
              /export/opt/weblogic/8.1_SP2/weblogic81/server
              /opt/rv/java/rvjpro.jar
              /opt/rv/java/ssmbrvclient.jar
              /opt/rv/java/tibrvj.jar
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/weblogic_sp.jar
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/weblogic.jar
              /xenv/iona/sun4/5.x/6.0/asp/6.0/lib/asp-corba.jar
              /work2/gx80747/src/Orbix6_config/etc/domains/GFINetEnv
              :$
              at weblogic.security.service.RoleManager.<init>(RoleManager.java:98)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.doRole(SecurityServiceManagerDelegateImpl.jav
              a:512)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegat
              eImpl.java:408)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.
              java:697)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelega
              teImpl.java:730)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl
              .java:873)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:719)
              at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:820)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
              at weblogic.Server.main(Server.java:32)
              Reason: weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement
              Engine unable to connect
              to the embedded LDAP server
              Cannot instantiate weblogic.entitlement.data.ldap.EData
              null
              

              I rebuilt the server and I still can't start cluster server but got a different
              error message. Any thoughts? (Migrating from Weblogic 6.1 to 8.1)
              =============================================================================
              LD_LIBRARY_PATH is:
              /usr/openwin/lib
              /usr/dt/lib
              /usr/lib
              /usr/local/lib
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/solaris/oci920_8
              /opt/rv/lib
              /bin/Solaris <not found>
              /opt/BPARun1.0_A0/lib
              =============================================================================
              CLASSPATH is:
              /export/opt/weblogic/8.1_SP2/weblogic81/server
              /opt/rv/java/rvjpro.jar
              /opt/rv/java/ssmbrvclient.jar
              /opt/rv/java/tibrvj.jar
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/weblogic_sp.jar
              /export/opt/weblogic/8.1_SP2/weblogic81/server/lib/weblogic.jar
              /xenv/iona/sun4/5.x/6.0/asp/6.0/lib/asp-corba.jar
              /work2/gx80747/src/Orbix6_config/etc/domains/GFINetEnv
              :$
              at weblogic.security.service.RoleManager.<init>(RoleManager.java:98)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.doRole(SecurityServiceManagerDelegateImpl.jav
              a:512)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegat
              eImpl.java:408)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.
              java:697)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelega
              teImpl.java:730)
              at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl
              .java:873)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:719)
              at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:820)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
              at weblogic.Server.main(Server.java:32)
              Reason: weblogic.security.spi.ProviderInitializationException: [Security:090314]Entitlement
              Engine unable to connect
              to the embedded LDAP server
              Cannot instantiate weblogic.entitlement.data.ldap.EData
              null
              

  • 'VTK-1000: Unable to connect to the Oracle Management Server

    Hello, I installed ORA 8.1.7 on Win2k, everything went smooth apart from I can't run OEM now, brings the following error:
    'VTK-1000: Unable to connect to the Oracle Management Server. Please verify that you have entered the correct host name and the status of the Oracle Management Server'
    I recall it was ok for NT, there was OracleOra817ManagementServer Service and now there is no any for Win2k..
    If you know any way I can make it up and running please help
    Thanks in advance
    Marina

    services: management server service started successfully.
    but OracleOra90Agent not yet started.
    the current scenario with my oem with login as management server has started with the user:sysman
    password:oem_temp
    still OracleOra90Agent has not started.
    inside oem server management,the discovery wizard is not cofiguring the nodes.
    kindly tell me, that is it due to the Agent, or SOMETHING ELSE.
    please do reply, thanks

  • "Unable to connect to the BlackBerry ID server. Please try again. (50500)"

    We have a user that is continually getting asked to verify his blackberry ID. Whenever the device turns on, tries to access apps etc.
    Whenever he types in his correct Blackberry ID details (verified as we are able to login at http://au.blackberry.com/bbid.html without any issues, both on PC and from the devices browser itself) we are met with the following error;
    Unable to connect to the BlackBerry ID server. Please try again. (50500)
    We have tried nearly every possible way to get around this, tried seperate BBID's (none work), different networks, resetting passwords, clearing browser cache, removing wifi networks, battery pulls etc etc. We were resigned to the fact that the device would have to be wiped however we cant even connect it to Link to take a backup without it saying "please sign in with your blackberry id on your device" within the Link window in order to backup certain stuff.
    Can anyone recommend anything we can do to either fix this issue, or try and allow us to take a full backup - (note; we have already tried disabling all networks on the device and no internet connectivity on the PC its connected to and trying to run a backup as well but to no avail).

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB33916 "Unable to connect to the BlackBerry ID Server (50500)" is displayed when attempting to change the BlackBerry ID Password or Recovery Question on the BlackBerry 10 smartphone
    Unfortunately, it has nothing useful (except for at least knowing that BB knows of the issue).
    You might try some of the things from this "sticky" post:
    http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
    Otherwise, you might need to ring up your mobile service provider and convince them to escalate you to formal BlackBerry support.
    Good luck and let us know!
    VIA | sdgardne
    http://supportforums.blackberry.com/t5/BlackBerry-Q5/Connection-id-Error-50500/m-p/2592423/highlight...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • ADF / OBIEE Integration : Unable to connect to the BI Presentation Server

    Hi,
    Using JDeveloper 11.1.1.6, I have created one ADF application to test its integration with OBIEE 11.1.1.6. The application contains jsf page which holds OBIEE dashboard. At OBIEE side, I have created Impersonate user. When I run this application on Integrated Weblogic Server, it shows OBIEE dashboard perfectly. But when I deploy the application on OBIEE weblogic server, it is deployed successfully but shows following error when we try to access application through URL.
    Unable to connect to the BI Presentation Server. Please ensure that it is running, configured properly, and that the connection details within this application are correct.Please check the log file for more details.
    The connection (http) is working fine when we check it inside application. Can you please help how to resolve this issue?

    Hi,
    I can see 2 errors and 1 trace message in EM for that deployed application.
    Error 1
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.soap.connection.BISoapConnectionFactory
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Cannot lookup the connection,Obiee using fallbacks
    Supplemental Detail javax.naming.NameNotFoundException; remaining name 'Obiee'
    at oracle.adf.share.jndi.ContextImpl.findObject(ContextImpl.java:647)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:144)
    at oracle.adf.share.jndi.ContextImpl.lookup(ContextImpl.java:149)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionFallback(BISoapConnectionFactory.java:522)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionImpl(BISoapConnectionFactory.java:296)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory._getConnectionAndAddIfNecessary(BISoapConnectionFactory.java:580)
    at oracle.bi.presentation.soap.connection.BISoapConnectionFactory.getConnection(BISoapConnectionFactory.java:163)
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:318)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Error 2
    Message Level 1
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Supplemental Detail oracle.bi.presentation.soap.connection.BISoapException: Please check the log file for more details.
    at oracle.bi.presentation.runtime.binding.BIRegionBinding.getHtmlContent(BIRegionBinding.java:323)
    at oracle.bi.presentation.view.faces.renderkit.ReportBaseRenderer.encodeAll(ReportBaseRenderer.java:101)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
    at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1324)
    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
    at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
    at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Trace Message
    Message Level 16
    SRC_CLASS oracle.bi.presentation.runtime.binding.BIRegionBinding
    SRC_METHOD _updateOrCreateSessionStylesheet
    Relationship ID 0
    Component bi_server1
    Module oracle.bi.presentation.runtime.binding.BIRegionBinding
    Host xxxx
    Host IP Address 192.168.1.1
    User <anonymous>
    Thread ID [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'
    ECID af46278784e183e2:-662facc5:1384c28bfd9:-8000-0000000000033dae
    Message Unable to get the Session Attribute. oracle.bi.presentation.runtime.styles.biStylesheet
    I hope this may help to identify the root cause and solution.

  • Unable to connect to the fpga compile server

    Hi, I keep getting the following message when trying to compile my FPGA code -> LabVIEW FPGA was unable to connect to the FPGA compile server.... System configuration: Win 7 64LV 2009 (32 bit) SP1LV FPGA 2009 SP1cRIO 90249114 Chassis I am developing and compiling on the same machine with the cRIO attached through a wired router. I've tried repairing the FPGA installation with no changes.  The attached screen shots are displayed in the order they are pasted Any insight would be appreciated - thanks in advance!

    I appear to be having similar difficulties with compiling a FPGA VI remotely with LabVIEW 2010.
    The remote compilation server is a PC running XP 64 bit. I have configured the compilation worker to allow remote connections and it lists it registered capabilities as Xilinx 10.1, Xilinix 11.5 and Xilinx 11.5 (64-bit). This can be seen in the attached png.
    My development system is running XP 32 bit with LabVIEW 2010. It is connected to the server via a local area network.
    The process I have been following is as follows;
    1.) Log onto the server PC and start the compile worker (this is either physically or by connecting via remote desktop and then disconnecting but leaving the PC logged in with compile worker on)
    2.) Set up the FPGA compilation settings on the development computer to be the server (hostname, domain\username, password)
    3.) Try and rebuild the target VI
    I then receive an error stating that the user name is too long or invalid (see png).
    I have set the exceptions in the server firewall to allow port 96 as I found that this is the default port used for earlier version of the compile server but I am unsure if this is applicable in 2010. I need to check with my IT services that exceptions I add are actually applied.
    If I go into the compile worker settings on my development PC and try and set them to that of the compile server then it also fails to connect.

  • Mavericks Mail not working properly with Exchange server after upgrade from Lion

    Mail will no longer maintain a stable connection to my company's Exchange server after upgrading to Mavericks from Lion.  Nothing has been changed on the Exchange server.  It has only partially downloaded the messages that are on the server.  It seems to download current messages when they hit the server.  It has difficulty sending messages.  When I send a message, it gets stuck in the Outbox.  It is constantly losing the connection to the server.  The problem is only occuring with Exchange email.  My iCloud email works properly as well as a POP3 account.

    No shortage of pre-existing threads on Mavericks mail issues...
    https://discussions.apple.com/message/23706759#23706759
    https://discussions.apple.com/message/23469853#23469853
    https://discussions.apple.com/message/24277596#24277596
    https://discussions.apple.com/message/23769976#23769976
    https://discussions.apple.com/message/19077388#19077388
    https://discussions.apple.com/message/24170482#24170482
    https://discussions.apple.com/message/24483692#24483692

  • My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2

    My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
    I have already put another chip carrier and the same problem happens, my phone is factory unlocked.

    Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
    Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
    At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
    Regards
    Joao

  • Unable to connect to the remote ftp server using dreamweaver.

    For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
    I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
    Please help somebody!!

    I am having a similar problem... maybe.  I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error:  Cannot make connection to host. Your login or password is incorrect.  That's odd, I've been connecting all day.  So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully.  I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host...  So I reboot my computer and start Dreamweaver CS3 again.  I reenter my remoter server information and click the Test button.  "... connect to your webserver successfully".  I try to put any file, FTP error again.  So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today.  I went through the trouble shooting steps listed here, though my FTP Logs are empty.  I cannot stay connected or even see the remote folders to try to drag and drop.  I tried to run ftp from a windows command prompt and it seems to connect me.
    I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files.  It's definately a Dreamweaver problem.  Any suggestions?

  • Unable to connect my ipod touch to itunes after updating to ios 5

    After i have finish updating my ipod touch 4th generation, to ios5 , my ipod was unable to connect to the itunes and all the apps and song are all missing from my ipod touch
    when i open my itunes it also say iTunes could not connect to this iphone because an unknown error occured (0xE8000065)
    Please help me thank you

    See this Apple support document related to your issue.
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • Can't connect to the Hyper-V manager after upgrading to Windows Hyper-V 2012 R2

    I have some Hyper-V server based on the free version (Windows Hyper-V 2012). I want to upgrade to the new version (Windows Hyper-V 2012 R2). So I begin to test it with
    an already working server (aka I was able to totally manager the server remotely without problem) and so upgrade it to the R2.
    After the upgrade, remote management and Hyper-V manager does not work anymore. So I redo my usual configuration steps (enable remote management, open firewall, uses
    latest hvremote.wsf, etc.). I was able to regain access to Computer Manager but not the Hyper-V manager which still can't connect at all. I can't access the Task Scheduler too without having a lot of XML error like "The task XML contains a value which
    is incorrectly formatted or out of range" (see below for screenshot).
    Is there a new step to do to be able to manage Hyper-V 2012 R2 from a Windows 7 computer?
    It's not a network problem as I can access RDP and MMC Computer Manager.
    To be sure the problem is coming from the R2, I have taken an old computer, install Windows Hyper-V 2012, do my usual configuration step, and
    tada: it works perfectly. I can access the Hyper-V manager from my client.
    Technical details:
    - Client is a Windows 7 SP1 x64 English member of a domain with latest RSAT (Windows6.1-KB958830-x64-RefreshPkg.msu).
    - Servers are in a workgroup (not a domain's member). And no, I can't add them to the same domain as the client.

    HI,
    Can we upgrade HyperV 2012 to hyper v 2012 R2.
    Thanks
    Atul

  • HT4972 has anyone had issues syncing with microsoft exchange server since upgrading to ios 5.1.1

    Has anyone had issues syncing with microsoft exchange since updating to ios 5.1.1

    No bug I'm using exchange at work I've updated a couple of people here and it's working. 
    Your IT guy can't fix this for you?   This problem usually is due to the exchange server not recogonizing your account.   You have the right server and domain entered?

Maybe you are looking for

  • Having trouble setting up RSS feeds

    I am new to Firefox , just switched to a Mac. I have tried to set up my RSS feeds on my sidebar. I am not seeing the option for live bookmarks. I imported the feeds from IE, some a showing twice. I am not seeing highlighted posts for new posts.

  • HT4522 How do I download from an old time capsule to a new one or to my computer?

    I have a new 2T time capsule but have somehow lost all the old material I originally copied from my old time capsule. How can I go into the old capsule and re-copy all those files onto the new capsule?

  • Can I sync iPod without music files accessible?

    I'm traveling with my laptop but not my external HD which stores almost all my music. (The original My Music folder exists on my C: drive with one or two files in it.) I know it's okay to boot up iTunes anyway, since podcasts update to the default or

  • Error when copying the folder Manager Self-Service in the portal

    Good Night. I am implementing  Employee Self-Service and Manager Self-Service For ESS i did  the following: 1. I  created a new folder for my project. 2. I copied  Employee Self-Service folder from the standard part into my folder. 3. I deleted the p

  • Notes App Crashes when Update Teared-off iCloud Notes on iDevices

    This is not a question, but a bug. After I tear-off a note (double-clicked the note from the list) from the Notes app with iCloud enabled, and then edit it on iPhone (iOS6.0.1), 2 problem occurred: 1. The updates will NOT show on the tear-off piece;