Unable to connect to the report server error

Hi all,
I have formula.jsp file, in that i have all the parameters to connect with the Crystal Report server. I have Crystal Report Server 2008. While executing this jsp i got the following error,
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.ServletException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:843)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:776)
     org.apache.jsp.formula_jsp._jspService(formula_jsp.java:143)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: 192.168.1.92. - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer
     com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
     com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect(Unknown Source)
     com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ClientDocument.new(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
     com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
     org.apache.jsp.formula_jsp._jspService(formula_jsp.java:93)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
But, in Crystal Report Server XI Relese 2, the formula.jsp file connecting with server and display the reports.
Why it is not working for 2008 server alone? Please help for this. If you need the jsp i will update.
Thanks,
shiva

Hi,
We are facing a similar kind of issue, when trying to access/ view crystal report using JAVA sdks.
Please find the below error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: Software caused connection abort: socket write error
Error code:- 2147217387 Error code name: connectServer
Please let us know if you were able to resolve this.
Thanks in advance,
Krishnam

Similar Messages

Unable to connect to the report server

I have a problem with run_report_object to call a report within a form. I am using 9ias Rel 2 and report server on the same machine. The test.rdf report can be executed using the URL in the browser.
I get the "Unable to connect to the report server" when I use the run_report_object in a form. Is it a configuration problem or is the code incorrrect?
My code is as follows:
Declare
repid report_object;
report_job_id VARCHAR2(200);
PL_ID PARAMLIST;
rep_status varchar2(100);
Begin
repid := FIND_REPORT_OBJECT('OP201P');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'repsrv');
PL_ID := CREATE_PARAMETER_LIST('TEMP');
ADD_PARAMETER(pl_id, 'p_ref1', TEXT_PARAMETER,:toolbar.ref1 );
ADD_PARAMETER(pl_id, 'p_ref2', TEXT_PARAMETER,:toolbar.ref2 );
ADD_PARAMETER(pl_id, 'p_sort', TEXT_PARAMETER,:toolbar.p_sort );
report_job_id := RUN_REPORT_OBJECT(repid, pl_id);
rep_status := REPORT_OBJECT_STATUS(report_job_id);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := REPORT_OBJECT_STATUS(report_job_id);
END LOOP;
IF rep_status = 'FINISHED' THEN
Web.show_document('http://portal.domain_name.com:7778/getjobid='||
substr(report_job_id,9) || '?server=repsrv', '_blank');
ELSE
message('Report failed with error message '|| rep_status);
END IF;
end;
For the show_document, I have tried both ' .. getjobid='|| substr(report_job_id,9)' and
' .. getjobid'|| substr(report_job_id,9)' .
Any help would be greatly appreciated.
Thank You.
Rgds
Edwin

Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link.
Hi ,
Did you check if TCP/IP is enabled for the SQL Server service.
If Disable you may need to enable it.
To resolve this error, you can either modify the connection string to use the server name or you can enable TCP/IP for the service. Follow these steps to enable TCP/IP:
1) Start SQL Server Configuration Manager.
2) Expand SQL Server Network Configuration.
3) Select Protocols for MSSQLSERVER.
4) Right-click TCP/IP, and select Enable.
5) Select SQL Server Services.
6) Right-click SQL Server (MSSQLSERVER), and select Restart.
Also Check the below link if doesn't work from above.
http://msdn.microsoft.com/en-us/library/ms365170.aspx
Regards, PS

"Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type:        Error
Event Source:    Office SharePoint Server
Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.

Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

Community Publishing-"Unable to connect to the CPS server" Error

I am trying to connect to Community publishing.
I download the Community Publishing Air app, but when I put in my username/password,
I get this error "Unable to connect to the CPS server. Please make sure your firewall settings allow access to this url:
http://cps.corp.adobe.com/nioamfpoll".
I have updated Air, but got the same behavior.
I am running osx (10.6.6) on a 8 core Xeon.
Any suggestions?
Thanks
Clay

Hi Clay,
Do you have a firewall, or are you behind a corporate firewall that blocks certain ports on your machine?
What do you see when you visit this URL?
http://cps.corp.adobe.com
How about the following URL?
https://cps.adobe.com/nioamfpoll
Thanks,
Puny Sen

Unable to connect to the report server 9iAS

I have a similar problem to the FRM-41213 when trying to initiate a Report_Job_Id := RUN_REPORT_OBJECT(Report_Id, pl_id) through a form.
I have tested everything on my LOCAL 9iDS environment which goes through a LOCAL report server (rwserver -install myserver) and it works.
Now, I am trying to deploy it to the 9iAS server on a Windows 2000 server. When I call my form everything appears to be working fine, however, I never get a connection to the report server and the applet hangs.
Any one have any idea what I should check to insure that I have my 9iAS server setup to run Reports though 9iAS or what this problem might be?
Thanks
Hyman

Check if the reports server on 9ias is up and running. You might check out metalink note 212551.1 if it is not. The "Second Solution for Issue 1" solved the problem for me.
Begin quotation:
"This can be accomplished by removing the <security> tagging from the <repserver>.conf file, where <repserver> represents the reports server name. This file is found in the Developer ORACLE_HOME/reports/conf directory."
End quotation.
Hope this helps
Gerald Krieger

FRM-41213 Unable to connect to the report server

I am converting an app from 6i to 9i. There are many reports, and I am trying, rather unsuccessfully, to get them to work. I have run the report server setup, and have the service started on my laptop. I am trying to use the following code to run a report attached as an object to my form, but I am getting the above 'cannot connect to report server' error. Can anyone point me in the right direction to resolve this problem??
declare
plistid          paramlist;
pl_name     varchar2(20) := 'report_params';
rep_id REPORT_OBJECT;
v_rep varchar2(100);
begin
plistid := create_parameter_list(pl_name);
     add_parameter(plistid, 'p_rpt_catg', text_parameter, v_rpt_hdr1);
     add_parameter(plistid, 'p_rpt_name', text_parameter, 'REPORT80');
     add_parameter(plistid, 'p_db_ver', text_parameter, 'V33');
rep_id := find_report_object('REPORT80');
set_report_object_property(rep_id, REPORT_EXECUTION_MODE, RUNTIME);
set_report_object_property(rep_id, REPORT_DESTYPE, SCREEN);
set_report_object_property(rep_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(rep_id, REPORT_SERVER, 'dvlpserver');
v_rep := run_report_object(rep_id,plistid);
Thanks -- Jean.

1) destype=screen is not allowed
2) Please refer this forms-reports integration document which explains in detail about the integration
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
3) In particular refer the pages 41-43 which explains some common errors and troubleshooting
4) Also look at info provided on things to take care while migrating from 6i -> 9i
Thanks
The Oracle Reports Team

Unable to connect to the report server from FORM in 10g

Just I start to create Forms and Reports .
Final step I try to put Button in Form Report to call Report but this job I have not do it before just I try it by my seftstudy to do.
However, i get message error i will show you to see which mistake i have done.
this picture error message:
http://img136.imageshack.us/img136/5830/errr11ex.gif
this picture paht of Report after import it in Form builder:
http://img146.imageshack.us/img146/4381/tree9eb.gif
this picture show the setting of properties in Report:
http://img501.imageshack.us/img501/3999/agent4nz.gif
this is my code :
declare
report_id report_object;
report_message varchar2(1000);
p_id paramlist;
v_rep VARCHAR2(100);
begin
report_id:=find_report_object('agent');
v_rep := RUN_REPORT_OBJECT(report_id);
report_message := run_report_object(report_id , p_id);
web.show_document('http://orcl:8889/reports/rwservlet/getjobid'|| substr(report_message, length('svr')+2)||'?server=svr');
end;
Can any one try to tell me what the mistake in my code and how to solve it?
My best regards;
Message was edited by:
ExplOrer

Hello !
You can try to use only the web.show_document call
WEB.SHOW_DOCUMENT('/reports/rwservlet?report=agent.rdf&destype=cache&desformat=htmlcss&server=srv&userid=you have to enter your username/passwort@database net name here,'_blank');
Have you defined the path for the stored reports ?
Try to locate the registy key REPORTS_PATH in the registry and add the root C:\project\reports . to the key
Katharina

Unable to connect to the remote server error

Hi All,
I am new to visual studio web development. when I try to run my application locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
please help me? I would really appreciate your help. Thanks.
ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

Hi All,
I am new to visual studio web development. when I try to run my application locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
please help me? I would really appreciate your help. Thanks.
ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you
Hello,
For web development issues, you could post them in
https://forums.asp.net forum to get help.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
1. Login to the ColdFusion Administrator
2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
4. Restart ColdFusion Application Server
Notes:
a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it." However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition). Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
Attached is an image of the error.
Just posting all of this as an FYI, in case it helps anyone.
Thanks!,
-Aaron Neff
(OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
I'll try to describe the error message window:
- It is 494x452 pixels
- Title of the window is "Error occurred while launching the Debugger"
- Body content of the window is as follows:
Unable to connect to the RDS server 'ServerNameHere'
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error Message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connect refused: connect

hi,
I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
Diagnostic report shows failed on the connectivity part
Connectivity
mx-direct Failed
0:00:00.719 Connecting to web331.oracle.com:1025
0:00:00.922 Name resolved to 148.87.108.234
0:00:21.906 connect() failed (0x8007274C)
0:00:21.906 Connection failed (0x8007274C)
Pl help me to fix the problem.
Regards
Gobind Ahuja

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support

Unable to connect to the report server error

Similar Messages

Maybe you are looking for