Unable to connect to the server.. Error Data : API_NOT_INITIALIZED on CUEAC Server Installation
Hi all,
I am trying to install CUEAC Attendant Server on Windows Server 2008 R2, tried several times. First, it got stuck on the Databahse Wizard. After three reinstalls, it still got stuck but somehow built the configure database named CFGATT and then started installing TSP. Finally, the setup has been finished and I went to the WebAdmin page. After I entered the login information, it gave an error : "
Unable to connect to the server.. Error Data : API_NOT_INITIALIZED"
I searched through the forum and found this topic :
https://supportforums.cisco.com/message/1215763
Here I found that there's a bug and I tried to do the fix myself as instructed :
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte44454
However, it changed nothing, looking forward to your responses.
Regards,
Fikri
Fikri,
It is not working as this is not a supported environment, the current release is not supported on Windows Server 2008 R2.
The next release (April 2013) will support that version of Windows Server.
Similar Messages
-
Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Unable to connect to the 2014 SQL Developer's Edition Report Server
Hello,
I have been through the wringer trying to gain access to my report service. I have to admit that I am something of a neophyte with regards to SQL Server but I am pretty good with Windows 7 management in general. I have just installed
SQL 2014 Developer's Edition under Windows 7 SP1. I have connected to the database engine server and loaded a couple of databases. I chose windows authentication and can get into the report configuration manager and the SQL server configuration
manager with no problems. I have registered the URLs for both the web and report manager. I can connect to all of the other instances (database engine, analysis services, and integration services). I have to run with administrator privileges
to connect to the integration services but it does not make any difference when attempting to connect to the reporting service either through report builder 3 or connect through object explorer. I can find no relevant errors in the RS log even after
enabling logging. I have been through many of the articles I could find online but nothing seems to resolve the problem. When connecting it shows Windows Authentication and the correct domain\user. I also browse to find the service so the
URL should be correct. The error that I am getting is as follows:
"Unable to connect to the server at CALYSTO\ReportService. The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that
the report server runs SQL Server 2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)"
Program Location:
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.GetRSConnectionObject(Boolean ensureOpenConnection)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.Microsoft.SqlServer.Management.UI.ConnectionDlg.IServerType.ProceedWithConnection(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
I have tried fixing the installation with the installation disk, removing the report service instance and reinstalling it, using the administrator account instead of mine (with is of course an administrator). I'm at a loss right now. I have spent
about 12 hours trying to track this down and so far nothing has worked. I'm about ready to reinstall the entire operating system and start all over. I thought that I would try this venue before going to that extreme.
Any thoughts, questions, or ideas would be much appreciated.
Thanks,
-Tom
Tom L"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Unable to connect to the content error!
Hi Everyone,
I am have followed some of the basic steps to achieve http dynamic streaming using default config of FMS 3.5 server.
I am installed my Strobe media Playback on apache 2.2 htdocs folder and the sample html works perfect when i call it from the browser (So I suppose my serevr is set up correctly.)
I have created three different bitrate files at 500, 750 and 1000 kbps and also created their manifest files using f4f packager so now I have 12 different files ( 3 of each, f4v, f4f, f4m and f4x). I have placed these files in a folder named content on my webserver where I put my strobe folder.
And now I am calling the 1000kbps.f4m file from the html code of my webpage using this code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
</head>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0"
width="640" height="480">
<param name="movie"
value="http://192.168.100.72/strobe/StrobeMediaPlayback.swf"> </param>
<param name="flashvars"
value="src=http:/192.168.100.72/strobe/content/Ag_Chap1_1000kbps.f4m
&streamType=recorded
&loop=true
&autoPlay=true
&playButtonOverlay=false
&autoHideControlBar=false"> </param>
<param name="allowFullScreen" value="true"></param>
<param name="allowscriptaccess" value="always"></param>
<embed
src="http://192.168.100.72/strobe/StrobeMediaPlayback.swf""
type="application/x-shockwave-flash"
allowscriptaccess="always" allowfullscreen="true" width="640" height="480"
flashvars="src=http:/192.168.100.72/strobe/content/Ag_Chap1_1000kbps.f4m
&streamType=recorded
&loop=true
&autoPlay=true
&playButtonOverlay=false
&autoHideControlBar=false">
</embed>
</object>
<body>
<script type="text/javascript">
swfobject.registerObject("FLVPlayer");
</script>
</body>
</html>
But it is giving me the error : WE ARE UNABLE TO CONNECT TO THE CONTENT YOU ARE REQUESTING.
Is there anything that I am doing wrong??
Suggestions will be highly appreciated.
Thanks,
AnkitIn order to troubleshoot the errors, please set the "verbose" parameter to "true" in the flashvars. The error messages will get more "technical".
I suppose there's something wrong in the streaming server setup. Please re-check your steps and ensure you put your packaged files in the media location declared in the apache conf file, then check if they are accessible from your browser.
Please tell me if it worked! -
Directory import - Unable to connect to the SLD
Hi,
I'm trying to import ID data from another XI
(this one is not in the SLD landscape)
I just want to see the receiver determinations
(don't want/need this scenario to work)
anyone knows if it's possible to import such tpz file
into a totally different XI system?
when I do it I get "Unable to connect to the SLD" error
I tried changing metadata properties file
sourcesystem=
exportXiSp=
contenttype=DirectoryView
and some other but still doesn't work...
anyone ever expirience such a scenario ?
BTW
I cannot do a complete ID import as I already have scenarios in my ID - so this is not a solution
Regards,
michalI encountered the same problem.
The resolution has nothing to do with the popup error message.
I discovered that in my environment, XI DEV has its' own SLD, and XI PRD has its' own SLD.
I went into the SLD on PRD, and manually created the neccessary namespace, sw product, sw component, technical system, and business system.
Afterwards, my import of the configuration objects worked.
Good luck,
Steve -
"unable to connect to the data access service" installing report server
Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
DanHi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan -
Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"
I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
1. Login to the ColdFusion Administrator
2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
4. Restart ColdFusion Application Server
Notes:
a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it." However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition). Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
Attached is an image of the error.
Just posting all of this as an FYI, in case it helps anyone.
Thanks!,
-Aaron Neff
(OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
I'll try to describe the error message window:
- It is 494x452 pixels
- Title of the window is "Error occurred while launching the Debugger"
- Body content of the window is as follows:
Unable to connect to the RDS server 'ServerNameHere'
Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
Error Message:
-1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
Root cause ->
Connect refused: connecthi,
I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
Diagnostic report shows failed on the connectivity part
Connectivity
mx-direct Failed
0:00:00.719 Connecting to web331.oracle.com:1025
0:00:00.922 Name resolved to 148.87.108.234
0:00:21.906 connect() failed (0x8007274C)
0:00:21.906 Connection failed (0x8007274C)
Pl help me to fix the problem.
Regards
Gobind Ahuja -
Outlook is unable to connect to the proxy server. (Error code 0)
Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Unable to connect to the Data Access service for this management server
Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
BobWell, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error: :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error: :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob -
Terminated with error: br REP-501: Unable to connect to the specified data
Dear All,
Oracle DB 10g installed on Windows 2003 Server machine and client is Windows 7 Pro. Forms are running fine. If I run report by puting everything in URL it is also giving result. But only when i am trying to call report via form I get an error REP-501: Unable to connect to the specified data. The report log file contains below result. Is this something to to AUTHID=ANONYMOUS??? I need your assistance in this regard as I have been facing this problem since quite a long time now.
[2011/10/22 3:55:55:34] Info 56013 (ConnectionManager:release): Connection 0 is released
[2011/10/22 3:55:55:34] Info 50132 (JobObject:reset): jobid = 72 Get command line: REPORT=E:\AuditSys\twoconsecutive_estimate.jsp USERID=AUDITSYS@customerdb P_USERID="MAJAN" P_REPORTNAME="Bills which have been estimated for 3 months consecutively" P_REGIONCODE="" P_TARIFF="" P_PRIGOV="" P_AREAFROM="2" P_AREATO="91" P_BILLMONTH="9" P_BILLYEAR="2011" P_MONTHS="3" BATCH=YES DESTYPE=cache DESFORMAT=HTML AUTHID=ANONYMOUS
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 72 is 0
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): jobid = 72 is in current queue
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Calling findDuplicatedJob for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): No Duplicate jobs for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job 72 is Enqueued
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:firstToRun): job 72 is first to run
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Trying to get engine for Job 72
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): Target max engines = 1
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 is used = true
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 state is 1
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Job 72 got Engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Job 72 calling setCommand on engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 5
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Send job 72 to engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:96] State 56016 (JobManager:updateJobStatus): Job 72 status is: Terminated with error:
REP-501: Unable to connect to the specified database.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:notifyWaitingJobs): Master job 72 notify its duplicated jobs.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 72
[2011/10/22 3:55:55:96] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/10/22 3:55:55:96] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/10/22 3:55:55:96] Exception 501 (): Unable to connect to the specified database.
Thanks,
ZiaDear guys, it is quite an urgency here and I am not getting any clue from anywhere else .... please give me some tips to handle the issue if anybody has some...
Regards, -
When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved. -
Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Launcher Service Event ID: 6102Date: 11/27/2007Time: 8:22:17 AMUser: N/AComputer: MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog -
I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advanceHi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support -
downloaded Reader XI and started to recieve error 40000015, found the fourm with the patch to the registery fix, now it tells me unable to connect to the server. To many bugs with the reader, how do reinstall an older version?
I click on the launcher and nothing happens, 15 min later it will tell cant connect to the server.
My computer is a windows 8.1; 64 bit operating system. I am stationed in South Korea, but that should not affect the program. Help please.
JohnHi johnd83157268,
Sorry for the inconvenience that has caused to you.
Could you please let me know what changes have you made in the registry.
You might need to uninstall Adobe Reader from Control Panel and try install it again from the following link:
Adobe Reader Install for all versions
Please ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt installation.
Try again and then let me know.
Regards,
Anubha
Maybe you are looking for
-
Checkbox disable/ enable in tabular form
Hi, I am using apex4.2, i have column "ACTIVE" in tabular form. it is simple check box type return value "Y/N". i want if i tick on one check box of active column then other check box should disable , and selected checkbox should have a value of "Y"
-
How to change email address on iCloud account?
Not sure how it happened while registering my wife's new iPhone, but the email address that appeared on iCloud was her iTunes address and not her .me address. We would like to change the iCloud addres to her .me address. How?
-
Adobe Illustrator CS6 quit unexpectedly
OS X Version 10.9.3 3.06 Intel Core 2 Duo 4GB 800 mHz DDR SDRAM IMac - 24 inch (early 2008) Help. Cannot get Illustrato or InDesign to work. So, I am getting this and can not seem to solve it. First off here is the history: Owned and operated CS3. Ha
-
Read from Excel file in SP2013
Hi, I have a requirement to read data from a formatted Excel file which is located in a document library, and put the contents in a List via code. This functionality should check - if he record exists update the list item, if not create a new list i
-
Lost Connection To Airport Extreme HD after Upgrading to Lio
Since installing Lion, I cannot access a specific HD connected to my Airport Extreme. It locks up the computer with a permanent spinning beach ball. All of the others on the network - not running Lion - connect to that drive as usual without difficu