Unable to connect to the UCCX via VPN

Hello, i have an issue,
when i am trying to login to the supervisor desktop agent via VPN, an error occurred
"unable to create connection with web-server. Chech the server with address *.*.*.*:80"
thankx in advance

With the script editor, the login prompt requires username/password/IP address of CRS server. So one would think that name resolution would not be required - yet the application references Call Manager by name and my VPN client could not resolve the name until I created a host file entry.
But this doesn't appear to be related to your issue. From your VPN client, are you able to ping your server IP address?

Similar Messages

  • Curve 9380 unable to connect to the internet via wifi

    I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

    Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

  • Help Needed i can't connect to the router via VPN

    I can not connect to my server via the VPN client i have attached the config. I also havve a bif problem i can't use the webb gui any more and idon't know why.
    Thanks i advance

    You would need to change the NAT from standard ACL to extended ACL as follows:
    access-list 150 deny ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.0.255
    access-list 150 permit ip 192.168.1.0 0.0.0.255 any
    ip nat inside source list 150 interface ATM0.1 overload
    no ip nat inside source list 1 interface ATM0.1 overload

  • I am unable to connect to the internet via WiFi connection.  My iphone works just fine.  Please advise possible solutions.

    I have an iPad on v5.01.  I am unable to use my wifi network to connect to the internet.  My wife's iPad works fine.  Please advise any potential solutions.

    Have you checked to see if your WiFi router needs to have your iPad's MAC address specifically permitted to use WiFi?  Some WiFi routers have a section in the settings called "Access List", possibly under "Security".
    You can find the MAC address in Settings > General > About > Wi-Fi Address

  • Updated firefox, now I am unable to connect to the internet via mozilla but other browsers still work

    When mozilla asked my for an update several months ago I chose to skip the install and wait. Did the install soon after and firefox stopped working even though my connection to the internet is fine. I uninstalled mozilla firefox, used another browser to access the mozilla website to reinstall firefox. This fixed my problem and firefox was working again, until another update came along. This time attempting to uninstall and reinstall did nothing. Once again I am left using another browser to use the support forum and firefox is not working. Please help!!

    That is an indication that a firewall is blocking the new version of Firefox. For details see [[Firefox cannot load websites but other programs can]].

  • Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

    Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik  

     

  • TS1398 my iphone 5s will not connect to the internet via wifi  since the latest update was performed this morning need help

    unable to connect to the internet via wifi since the latest update

    Hello,
    Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care.

  • IOS 5 update on iPhone 4 - no connection to the Internet via GSM

    Hello,
    After the iOS 5 update my iPhone is unable to connect to the Internet via GSM. I tried to reboot and restore the device and also to reset the networ data transmission settings. So far neither of these worked. The Wi-Fi connection works after the update just fine. I also contacted the carrier to make sure my service subscription is ok.
    Does anyone have a similar problem?
    Thanks,
    Tomek

    Had to restore the phone to fix, after making sure all the possible settings everywhere were United States and English, but it worked. Still find it amazing that an update would change so many settings in so many places, especially the ones that aren't on the phone.

  • I have somehow gotten a VPN line added to my settings just below Personal Hotspot.  Unless this is turned on I am unable to connect to the interenet.  How do I get rid of this VPN?

    I have somehow gotten a VPN line added to my settings just below Personal Hotspot.  Unless this is turned on I am unable to connect to the interenet.  How do I get rid of this VPN?

    Your post doesn't mention whether you are getting any errors from your iPod or that it's a case where deleting in the usual ways doesn't work so I'm unsure what your issue is. In normal use, how you delete content from your iPod depends how you have it set to update:
    If you are updating automatically then delete the files from the iTunes library and next time you connect they will automatically be deleted from your iPod. Highlight the file and press the delete key on your keyboard, or right click and choose either Clear or Delete, depending on which version of iTunes you are using.
    If you are updating manually, connect your iPod and click on the icon when it shows in the iTunes 7 source list click on the chevron (the little triangle) to the left of the iPod icon This will display the various icons for the iPod itself, Music, Movies, TV Shows and Playlists. Click on Music and you'll see the traditional song view. Find the files on your iPod that you want to remove, highlight them and delete directly.
    To select multiple items such as all the songs in an album, click on the first track in the list hold down the shift key and click on the last track to highlight the selection. Then press the delete key.
    To summarise, you start by highlighting the song/video/selection in either the iTunes library or on the iPod song list as displayed in iTunes then press the delete key on your keyboard: Deleting songs or playlists from your iPod

  • The WSUS administration console was unable to connect to the WSUS Server via the remote API. (Server 2k8)

    I have installed a new server for WSUS on Server 2k8, This is a stand alone server on Internet No client system is connected on this server as I have to copy these updates to my LAN which never connects to internet. (Previously I was using server 2k3. for
    online & server 2008 on my LAN , now I have changed the server for Online)
    Wsus has finished the synchronization & downloaded updates of around 67GB & its downloading more updates. The server shows me some updates are waiting to approved. but when I click the link for those updates I get following error message.
    error code is as follows -
    The WSUS administration console was unable to connect to the WSUS Server via the remote API.
    Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
    System.Net.WebException -- The operation has timed out
    Source
    System.Web.Services
    Stack Trace:
       at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
       at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse(WebRequest webRequest)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, Int32 publicationState)
       at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchUpdates(String updateScopeXml, String preferredCulture, ExtendedPublicationState publicationState)
       at Microsoft.UpdateServices.Internal.BaseApi.Update.SearchUpdates(UpdateScope searchScope, ExtendedPublicationState publicationState, UpdateServer updateServer)
       at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates(UpdateScope searchScope)
       at Microsoft.UpdateServices.UI.AdminApiAccess.UpdateManager.GetUpdates(ExtendedUpdateScope filter)
       at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
       at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows()
    I Have tried desabling the firewall,disabling the antivirus protection. Tried by changing the default rule Please Help.

    Hi Sagar,
    First, please check if the RAM is exhausted. When there is not enough RAM, this issue may occurs.
    Please try to run iisreset on the WSUS server, then try to reconnect.
    Also, please try to run the server cleanup wizard to remove the unused update.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any we

    I had an app which disables an iPhone to connect to the internet via mobile network. In the meantime I have deleted that app but it still affects my phone. For example iPhone shows that 3G sign on the top (next to the time) but it is unable to open any website. Is there anything I can do about it?

    What was the app you are referring to? I'm not aware of anything on the app store that is designed to do that, unless you're talking about an app that was causing a problem...
    Was/is your phone jailbroken?

  • I have been unable to connect to the iTunes store via my computer for the last 2 days.  What is going on?

    I have been unable to connect to the iTunes store via my computer for the last few days.  It is rather frustrating.  Is something wrong?

    Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

  • I am unable to connect to the itunes store. I have tried via wifi and cellular. Operating system and itunes are latest versions. Have powered down the ipad and restored settings. Can puchase new songs and apps with no problem....just can't update apps.

    I am unable to connect to the itunes store to update apps on my ipad.
    I have tried both wifi and cellular connections.
    I have the most recent updates of the operating system and itunes.
    I have powered down and reset and restored.
    I have no problem purchasing and downloading new apps or songs.
    Please help!

    Refer to this article"
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368

  • Macbook Pro suddenly will not connect to the internet via ethernet cable.

    I know this is a long shot... but I figured I would give it a try.
    My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
    I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
    I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
    When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
    I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue.  Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
    I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • [Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

    When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
    “Unable to connect to the server by using Windows PowerShell remoting”.
    Figure 1: Unable to connect to the server by using Windows PowerShell remoting
    First of all, we need to verify the configurations as it suggested:
    1. The server must be available by using Windows PowerShell remotely.
    2. The server must be joined to a domain.
    3. The server must be running at least Windows Server 2012 R2.
    4. The currently logged on user must be a member of the local Administrators group on the server.
    5. Remote Desktop Services connections must be enabled by using Group Policy.
    In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
    To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
    Enable-PSRemoting -Force
    Figure 2: Enable PowerShell Remoting
    However, if issue persists, we need to check whether it has enough memory to work.
    By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
    the memory via the PowerShell command below:
    Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
    Then, you need to restart the server and the issue should be resolved.
    You can get more information regarding Remote Troubleshooting by below link:
    about_Remote_Troubleshooting
    If you need further assistance, welcome to post your questions in the
    RDS forum.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    i found another possible reason, this solution worked for me:
    http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
    I tried to set up powershell remoting on a server and kept getting this error:
    Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
    ot process the request. It cannot determine the content type of the HTTP response from the destination comput
    er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
    pic.
    After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
    many security groups or in my case because of the SidHistory attribute.
    The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
    If the keys does not exists you can create them, be sure to use the DWORD type.
    I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Maybe you are looking for