Unable to connect to Verizon prepaid data plan. Verizon states everything is Todd on their end. Please help
.how to connect to Verizon wireless data plan from ipad 2?
UUnfortunately I have tried all of the obvious fixes with no luck. Thanks anyways
Similar Messages
-
I just updated my iphone 4s with sprint to ios6. while I can connect to wifi I am unable to connect to my 3g data plan. my celluar data is switched to un under general settings.
I also cant send texts.
thanks for the helpthanks, it took 4 tries, but it worked on the 4rth. I appreciate your help.
-
I am unable to connect to itunes. its say the ipod is disabled. i found this ipod so please help me
i really need help i found this i pod touchin the park its 8gb . it tells me to connect to itunes. your ipod is disabled . what should i do please help me
roaminggnome is right, it's not "finders keepers", man up do the right thing and turn it in. If nothing else you'll sleep better.
-
I can only add that i only downloaded firefox 3.6 just over a week before the first crash and all had been well until then . Following the first crash over35 program crash reports have been and are still being sent by Mozilla Quality Feedback Agent Firefox 2,but nothing appears to being done about them. I have a website i cannot reach and am desparate,i have received no feedback whatsoever,your help would be much appreciated,thank you Robin Sanders,[[email protected]]
Check the proxy settings under Tools -> Options -> Advanced - Network tab, Settings button.
You probably want No Proxy, if it is set to anything else.
See https://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Connection_Settings_Dialog
http://fastun.com (a registration required web accelerator / anonymizer) indicates it has some sort of Firefox add-on. Do you see a relevant one in Tools -> Add-ons -> Extensions? Try disabling it.
If you are not sure which one it is, try [[Safe Mode]] to disable all of them. -
Terminated with error: br REP-501: Unable to connect to the specified data
Dear All,
Oracle DB 10g installed on Windows 2003 Server machine and client is Windows 7 Pro. Forms are running fine. If I run report by puting everything in URL it is also giving result. But only when i am trying to call report via form I get an error REP-501: Unable to connect to the specified data. The report log file contains below result. Is this something to to AUTHID=ANONYMOUS??? I need your assistance in this regard as I have been facing this problem since quite a long time now.
[2011/10/22 3:55:55:34] Info 56013 (ConnectionManager:release): Connection 0 is released
[2011/10/22 3:55:55:34] Info 50132 (JobObject:reset): jobid = 72 Get command line: REPORT=E:\AuditSys\twoconsecutive_estimate.jsp USERID=AUDITSYS@customerdb P_USERID="MAJAN" P_REPORTNAME="Bills which have been estimated for 3 months consecutively" P_REGIONCODE="" P_TARIFF="" P_PRIGOV="" P_AREAFROM="2" P_AREATO="91" P_BILLMONTH="9" P_BILLYEAR="2011" P_MONTHS="3" BATCH=YES DESTYPE=cache DESFORMAT=HTML AUTHID=ANONYMOUS
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job queue for jobid = 72 is 0
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): jobid = 72 is in current queue
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Calling findDuplicatedJob for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:findDuplicatedJob): Found no duplicated job for job 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): No Duplicate jobs for jobid = 72
[2011/10/22 3:55:55:34] Debug 50103 (ConnectionImpl:runJob): Job 72 is Enqueued
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:firstToRun): job 72 is first to run
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Trying to get engine for Job 72
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): Target max engines = 1
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 is used = true
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:getIdleEngine): rwEng-0 state is 1
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2011/10/22 3:55:55:34] Debug 50103 (JobManager.runJobLocal): Job 72 got Engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Job 72 calling setCommand on engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 5
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2011/10/22 3:55:55:34] Debug 50103 (JobManager:runJobInEngine): Send job 72 to engine rwEng-0
[2011/10/22 3:55:55:34] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 3
[2011/10/22 3:55:55:34] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2011/10/22 3:55:55:96] State 56016 (JobManager:updateJobStatus): Job 72 status is: Terminated with error:
REP-501: Unable to connect to the specified database.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:notifyWaitingJobs): Master job 72 notify its duplicated jobs.
[2011/10/22 3:55:55:96] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 72
[2011/10/22 3:55:55:96] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/10/22 3:55:55:96] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/10/22 3:55:55:96] Exception 501 (): Unable to connect to the specified database.
Thanks,
ZiaDear guys, it is quite an urgency here and I am not getting any clue from anywhere else .... please give me some tips to handle the issue if anybody has some...
Regards, -
REP-501: Unable to connect to the specified data
i found this error when i try to run reports in 11g-->>
REP-501: Unable to connect to the specified data
kindly provide solution regarding the same.Dear guys, it is quite an urgency here and I am not getting any clue from anywhere else .... please give me some tips to handle the issue if anybody has some...
Regards, -
Outlook 2010 Client - "unable to connect to retrieve additional data" for some Distribution lists
We have a mix of Outlook 2003, 2007 and 2010 clients in our organization.
Users with an outlook 2010 client are having issues with a number (not all) of our distribution lists.
Issues: When selecting a distribution list in the new message 'to' fiedl, a 'message tip' appears with the name of the DL and 'contains xx recipients'.
However, when attempting to expand the DL (selecting the + sign) the following prompt appears "Cannot perfrom the requested operation. The command selected is not valid for this recipient. The operation failed"
When selecting the DL through the outlook address book the memberlist is empty and has a mail tip "unable to connect to retrieve additional data".
The DL's were all created in a 2003 environment.
We are currently setting up a 2010 environment, and all DL's were created prior to any schema updates etc.
Of note, users experience the issue, but access the list through OWA don't have the issue.Please also perform the following steps to troubleshoot the issue.
1. Temporarily turn off firewall and antivirus program on the problematic machine for a test.
2. Remove the Outlook profile completely and create a new profile.
3. Login on the same mailbox by Outlook 2010 on another machine to check the result.
If the issue persists, please open Event Viewer and check whether any error message exists. If so, please post it here for research.
Thanks.
Novak Wu-MSFT -
help!!! i am unable to connect to a wifi network and ive tried everything but nothing seems to work!!! can someone help pls
try connecting to another wifi network to isolate the issue. at this point it's impossible to tell if it's your phone or your network
-
Im unable to use my apple ID with imessage or FaceTime on my mobile. Ive tried almost everything but still no success. Please help!!!
Im getting the please try again youve used an incorrect password notification on the screen when I know for certain that im entering the correct password.This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location. -
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
Hi,
My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
Expecting some quick solution in this regard,
Thanks
Prabhu(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
I am unable to upload a firefox version that is compatible with my OS 10.4.11. Please help!!!!
The website to download the version that is compatible withmy OS 10.4.11 is Firefox 3.6, but for some reason i am unable to download that older version- nothing happends when i click on the site...please help!!!!
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 6 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
i can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks
They are DVDs with video files from a little more than 2 GB per file, were burned in Snow Leopard, with UDF file system, now that I updated to Mavericks when I try to read disks displays the directory in the finder a moment and then disappear and does not display them show them more. It is impossible to read the discs, but only those who were burned with UDF file system. Thank you for your help.
-
my phone has gone into recovery mode on its own. says to connect to itunes. i have restored it 10 times and it does nothing please help me i am out of the country and desparate
Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
Maybe you are looking for
-
AirPlay mirroring not working with Mac mini mid 2011
I recently upgraded my Mac mini to mountain Lion Osx for being able to use AirPlay Mirroring Feature with my Apple Tv3 5.0. Normal l'y i should qualify for being able to use this Feature but the only thing i CAN get is a green screen... When activati
-
We are wondering if we can use airplay monitoring to share screens from a single macbook to multiple apple tv's. We want to "broadcast" the same screen to monitors in different rooms Thanks for the help.
-
Problems referencing a primary key field in a master-detail
Hello, I am making an application where I have a master-detail page. In the detail section it is possible to add new rows using the standard "Add row"-button that the wizard creates. The detail section has a column with a link in it. This link leads
-
Hello all. I found the refresh patches is failing in OEM 10.1.0.3.,shown below. Does any one has a clue what is the fix for this? Step: RefreshFromMetalink Page Refreshed Jan 23, 2007 1:19:35 PM Status Failed Initialization Started Jan 23, 2007 12:00
-
Installation of software updates in mail, firefox etc.
When I recently did updates to several programs including firefox, safari, and mail, they will not open. It seems the update loaded correctly, but then the program will not open. Any ideas how to fix it?