Unable to connect to Viber&unable to delete it

After installing Viber on MacBook Pro it won't connect, telling me again and again I had no internet connection but I do. So I tried to delete it again but whenever I want to do so, it tells me it can't be deleted since Viber is open. I tried finding a way to 'close' Viber but only failed. What shall I do? There's no point on having an app on the laptop that anyway doesn't work properly.
Thanks in advance

Can you Force Quit the application (under the Apple menu)? From this article - http://viber.kayako.com/Knowledgebase/Article/View/427/64/how-to-remove-viber-de sktop---mac - it looks as though you only have to trash the application to uninstall it.
Clinton

Similar Messages

  • HT1695 cannot connect to wi fi . also unable to delete fotos . there is no bin icon

    new phone will not connect wi fi . also unable to delete fotos . no bin icon

    Jillxz wrote:
    I have fiber optic cable with no modem.  Do I need to use the Blue cord that comes with the Cisco Valet M 10 router ?
    I'm pretty much a dummy.
    Hi try to access the link below that will help you. Reset the router first before reconfiguration. 
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...
    Your set up should be like this. From the wall to the wan port of the router and from the lan port of the router to the computer.

  • Unable to delete Address Book File

    I am unable to delete nor copy over an Address Book file that I have on an external HD connected via Airport Extreme. When I connect the HD directly to my Macbook Pro, I am able to delete the file - but not via Airport Extreme. When I attempt to delete the file, I get a message from Trash as follows: The operation cannot be completed because the item "Metadata" is in use. Same message when I attempt to replace the file with a new file. In other words, I am unable to use AE to transfer my Address Book file to my external HD, unless I change the name of the file. What is going on here?

    Hello Bob.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • BOBJ is unable to delete file from OFRS

    System Info:
    Business Objects Enterprise XI3.1 SP3 FP3.2
    Windows 2003 Server Enterprise Edition SP3
    Oracle 10.2
    Java 1.6.0_20
    APACHE Tomcat 5.5.20
    2 clustered servers
    FRS located on SAN Disk Drive connected to primary server (Winchester1)
    We use WebIntelligence exclusivly.
    We are receiving the following error in our event log on our clustered server:
    Source: BusinessObjects_CMS
    Category: General
    Type: Warning
    Event ID: 33018
    Computer: Winchester2
    Unable to delete file from the file repository. Make sure a File Repository Server is running and registered and enabled. Details : Failed to connect to the File Repository Server output. Make sure the server is up and running.
    We have verified the FRS is running and we are able to connect to it from our clustered server (Winchester2).  The security settings are set to full control for the admin group and the users have Read/Write access to the file store folders.  The errors are filling up our event logs and causing issues with the servers.  this appears to be happening each morning and the file it is trying to delete is an .xls file.
    We have a ticket open with SAP Support but they are just as baffled as we are and keep sending us from one group to another and tell us they need to look at it on thier end and they will get back to us.
    Has anyone had this happen on their system?

    Hi Richard, did you ever get this issue resolved?  We are having a similar issue on XI R3 SP4 using NAS/CIFS shares for our File Stores.  We see this issue mainly after our servers are patched and a full environment restart is initiated.  Like you, our event logs fill up with so many error messages I cannot pinpoint exactly when the issue starts happening.
    Any help would be much appreciated.

  • Unable to delete files from encrypted external SD Card using File Commander

    I've run into some trouble trying to delete the directory com.spotify.music from my external SD Card (encrypted) after a hard reboot using the reset button next to the sim card.
    I need to do this for the Spotify app to work (FC on starting it) and I'm currently unable to delete the folder and its contents from Sony provided file explorer(FC File Commander).
    Is there a way to delete this app from adb or other command line tool or how should I go about this? Developer options are enabled because I'm learning to develop apps. Not particularly keen on rooting or otherwise format my SD Card but it's an option if there are no other ways to do it. 
    I can see the contents of my card using File Commander just fine. Spotify app is uninstalled, I tried remove cache and data before uninstall also.

    Thommo wrote:
    Are you able to delete files via your Pc or are you able to remove the card from your phone and connect it to a Pc for file deletion - There is a free program called Unlocker currently on version 1.9.2 which is excellent at deleting files that don't want to be deleted - You would install the program then right click the file and choose Unlocker and then when the program starts choose delete
    I guess he will not be able to move the SD card to the computer since it's encrypted and is working only with that particular device, but he should be able to access it via PC.
    If you can try to uninstall Spotify from your phone. I assume Spotify is not working due to some rubbish inside it's directory, but on the other hand you can't delete the folder because it may be used by Spotify. If you uninstall app folder may be unlocked.
    Best regards,
    Sergio PL
    Xperia Z1 / Nexus 7 (2012)

  • Unable to delete file on NW6.5 sp8.

    I'm unable to delete a file on a NW6.5 sp8 server.
    This is only a copy, so it's not mission critical, but it's starting to frustrate the hell out of me!
    A colleague was given a helpdesk problem about a misbehaving pdf, he made a copy of the pdf in a different directory to do some testing but now finds that he cannot delete this copy!
    I've tried deleting it using Windows Explorer, Dos, Filer.Exe, Console One, and possibly one or 2 others. I get various errors but they all seem to infer that either I'm using a user who doesn't have the necessary rights (I'm using our standard admin user, so that shouldn't be the problem) or that the file is in use by others. Using the JRBUtil 'Openfile.exe', I find that the file is being used by 4 instances of my admin user.
    If I try and disconnect these instanceswith 'Openfile.exe', I get confirmation that the connections have been terminated, but I'm still not able to delete the file. If I go back to 'Openfile.exe' it tells me that the same 4 connections (same connection numbers throughout) are still in use! If I try to close the connections using the Console Monitor then it appears to close the connections, they disappear from the list and if I re-check then they are still not visible, but if I go back to 'Openfile.exe' then it reports that the connections are still current! I've tried using iManage to close the connections, but with no success!
    The server in question is our main data server so the chances of rebooting it just because it 'may' fix this problem is unlikely to happen.
    Again it's only a copy and not mission critical, but it would be good to find an answer to this. So, is there a command or utility that will just delete a file when asked?
    Many thanks
    Ian.

    Originally Posted by dgersic
    On Tue, 27 Sep 2011 10:56:02 +0000,
    If the server thinks the file is open / locked, you will not be able to
    delete it without resolving that first. You could try dismounting the
    volume, which should force the OS to close the file.
    David
    I think that it is this open / locked issue that is causing the problem. The idea of dismounting the volume sounds like a less brutal version of my original idea of having to reboot the server to clear the connections.
    However, as I said to Tom above, I've got to try and get this past the server admin, and as this is only a copy on our main data server which is in constant use, I'm not sure that I'll get permission to try this. Unfortunately I think that I may have to accept that I'll have to wait until the server is taken down for a more important reason. Frustrating, but that's life.
    So, thanks to all who replied and for the suggestions. I'll certainly log them for future use, so if nothing else this has been a good learning experience for me.
    Ian
    (Now I've just got to work out how to close this thread!)

  • Unable to delete photo from ipad

    When I first got my ipad, I synced s photo from My Pictures.  I am unable to delete it from the ipad by using the delete option.  How do I get it off my ipad?

    Go to the folder on your computer that those synced photos are in. Move those photos elsewhere then sync and the photos will go away.
    Alternatively you can connect your device to your computer and open iTunes. Click on the name of your device and navigate to the photos tab. Choose a different folder or deselect any folder then sync. Your device will replace the photos on your device with what's in that other folder, or simply remove them all together if you deselect all photos syncing.
    Given the difficulty of removing synced photos, I stopped syncing photos a long time ago. Instead if I want photos on my iPad I'll just mail them to myself...or you can use any number of photos apps that have the ability to sync/share data, or upload them to something like dropbox and then download them onto your device. Downloaded or saved photos can be deleted from inside the photos app.

  • Unable to delete rows from Target.

    Hello everyone,
    I am unable to delete rows from target data store. Here is what I have done.
    Source Oracle 10g - staging 11g - Target Oracle 11g
    I have implemented consistent set CDC on data model in staging and added 2 tables to CDC and turned on the journals . Both tables A and B are joined together via Column E (primary key of table A). Table A is the master table(has foreign key). Table B is child table. Target column consists of all the columns of both table A and B.
    Following is what I am able to do and not to do
    ABLE TO DO. If data is inserted into both or any of journalized tables I can successfully load the same in target by performing following steps. 1. Extend the consistency window at model level. Lock subscriber. Run the interface with any source table marked as Journalized data only. Unlock subscriber and purge journal.
    ABLE TO DO. If data is updated in any of the journalized table, along with the steps mentioned above I can execute two interfaces. In one Interface table A marked as journalized data only Joined with table B and in second interface table B marked as Journalized data only joined to table a.
    NOT ABLE TO DO If data is deleted from one or both tables it shows up as journalized data in JV$D<tablename> marked as D with date and subscriber name but when i run the interface by extending the window , locking subscriber executing both interfaces, unlock subscriber purge journals. no change takes place is Target. After unlocking subscriber step, journalized data gets removed from JV$D view. Please let me know what I am doing wrong here. How can rows delted from source can also be deleted from TARGET?
    NOTE : In the flow table SYNC_JRNL_DELETES is YES
    In moel under jounalized table tab Table have following order Table A folloed by Table B
    Thanks in advance
    Greenwich

    Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
    If so then I repeat my self :-) Why not to connecting to the SQL server directly?
    * even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
    [Personal Site] [Blog] [Facebook]
    Access app is the legacy app. 

  • Unable to delete photos from my ipad2 .

    I am unable to delete photos from my ipad2. I am able to select the photos to delete but when I press the red delete button nothing happens. Is anyone else having this experience? Is there a known problem. Is there a solution?

    You don't say what type of photos - were they taken with the iPad or synced from your computer ?
    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/wesites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view. Photos that were synced from your computer are deleted by removing them from where they were synced from and then re-syncing (if you were able to delete them directly on the iPad, then the next time you synced photos they would be put back onto the iPad, unless you remembered to also remove them from your computer).

  • Unable to Delete client

    hi
    i have creat new  client 300, but it is not working properly that's why i want to del it but unable to  delete this , also i have test run to delete client showing error timeout
    " Runtime Errors         TIME_OUT
    Date and Time          26.03.2009 10:28:43
    What happened?
         The program "SAPLSCCM" has exceeded the maximum permitted runtime without
         interruption and has therefore been terminated. "
    plz tell me how can i delete that client
    regard

    hi
    we execute the command of truncate table ddlog and run again the r3trans after finishing it without error log is as under
    4 ETW000 Summary:
    4 ETW000
    4 ETW000 Totally 3 table entries deleted.
    4 ETW000  [dev trc     ,00000]  Fri Mar 27 12:20:10 2009                         761620839  5072.293064
    4 ETW000  [dev trc     ,00000]  Disconnecting from ALL connections:               757540  5073.050604
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                  993  5073.051597
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=00000000050FE5A8,usrhp=00000000050F9738)
    4 ETW000                                                                            3700  5073.055297
    4 ETW000  [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=00000000050FE5A8,srvhp=00000000054F30E8)
    4 ETW000                                                                             525  5073.055822
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     599  5073.056421
    4 ETW000  [dev trc     ,00000]  Disconnected from connection 0                        17  5073.056438
    4 ETW000  [dev trc     ,00000]  statistics db_con_commit (com_total=2, com_tx=2)
    4 ETW000                                                                              19  5073.056457
    4 ETW000  [dev trc     ,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)
    4 ETW000                                                                              17  5073.056474
    4 ETW000 Disconnected from database.
    4 ETW000 End of Transport (0000).
    4 ETW000 date&time: 27.03.2009 - 12:20:10
    after that we stop mmc and db also restrat the system but when we logon to the client 300 i connected to this , so tell me deletion is performed or not
    rgds
    imran

  • CRASH DURING INSTALLATION OF APPLICATION - UNABLE TO DELETE EITHER !!

    Hi, I am presently very happy with iPhone 3G having upgraded from the original model yesterday...
    I have one small problem, however, I have installed about a dozen or so applications from the the Apps store, about half using the iPhone and the other half from iTunes store on Mac.
    Everything was fine, but one free application:- "Checkword" which I was installing on iPhone locked up during the "Loading: phase of installation and has sat doing nothing in spite of numerous re-sets of phone and connecting to iTunes.
    I am unable to delete the App from the phone itself as this is not possible until installation is complete.
    I am a little concerned as this means potentially "glitchy" software on Apps store or a bug within version 2.0 of iPhone software which allows partially installed software to "hang" and prevents subsequent deletion of "useless" icon.
    I have even attempted to load the software via iTunes with the intention of over-writing onto phone, but iTunes indicates that I have already purchased the software and that I should "Check for purchases" from Store menu.
    Performing this instruction produces "Unable to check for purchases. Unknown error occurred (-206).
    This is only a small problem, but if this were to happen frequently iPhone users will have potentially dozens of unwanted half-installed apps left on their phones......
    Any ideas Guys, Ian R

    chiu,
    What is the exact RPC error messages? See if these article helps and fits the bill.
    http://consumer.installshield.com/kb.asp?id=Q0888
    Jason

  • Unable to delete JCA resource adapters

    Hi All,
    I am unable to delete resource adapter. Please help
    Here is the error "Deleting JCA Connection Factory: InboundRA_QN1_100 failed due to: Removing or adding connection definition "InboundRA_QN1_100" failed because "It is not allowed to remove the last connection definition.""

    Hello Dheeraj,
    Check the kba 1942002 Deleting JCA Connection Factory fails with "it is not allowed to
    remove the last connection definition". This covers this same topic.
    Regards
    Mark

  • I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.

    I am trying to free up some room on my touch and am unable to delete any songs or books from the listing.  With iTumes open and my touch listed I open the touch.  I then select the items I want to delete from the touch and press the delete button.  Nothing happens.  I have also tried to right click on the item, but a delete option is not listed.  What do I need to do to get rid of some books?

    Open itunes, connect ipod, go to each tab, select what you want to be on the ipod, sync

  • WRT610N Corrupted Recycle Bin, Unable to Delete Files

    I have a WRT610N router with a Western Digital external hard drive connect by USB as a network attached storage device.
    I have the drive mapped to my local computer.  I am unable to delete any files or folders from the drive and receive continuous errors that my storage device has a corrupted recycle bin (i.e. N:\Share\User\$Recycle.bin).
    How do I fix this?

    Well Brandon, I backed my PC up again and moved my User Folder to my NAS.  Other than being slow, I haven't had the issues you describe yet.  It could be that you may have been shutting down and the network disconnected before the NAS finished writing...I can't be sure.  I would like to share with you that I believe you would be more satisified with the performance of your PC if you kept those files local and used your NAS as a Backup and/or file sharing device.  It is just too slow...kind of like having all your files on floppys!!
    So, while mine is working in the short term, I am moving it back to my local disk (ok, let me be honest, my raid 5 disk ARRAY..what can I say, I hate restoring from backup!!)  I think you will be more satisfied if you moved yours back as well.  Performance would increase a lot.
    So consider using the NAS as just that...A place where you can store/share files on the Network...not do a lot of read/write activity as your would in a SAN or local drive.
    Is there some particular reason that you want to use the NAS to hold all your recent data?
    THanks
    Lt

  • I am unable to delete certain photo albums or individual photos in it as shown below  in my iphone, ... Can anyone help me on this???

    I am unable to delete certain photo albums or individual photos in it as shown below  in my iphone, ... Can anyone help me on this???

    Did you sync those photos from iPhoto or and photo program, you would need to delete them on your computer then connect your iPhone and sync. 

  • Unable to delete any applications.

    Hi,
    Recently I upgraded to Snow Leopard, noticed some real improvements, etc. However, it has become apparent over the last week or so, that I am unable to delete any application from any folder on my system. I have tried changing ownership and permission settings to no avail. I have also tried using those application removal tools (AppZapper, AppDelete, et al). I am not an expert in using the Terminal application, so I have not tried changing settings using this.
    I had intended to take my computer into my local Apple store, however, I wanted to see if I could find a solution online and fix it myself.
    I should also mention that I am not trying to delete pre-installed software, just third-party software that I no longer use.
    Any help would be appreciated,
    Thanks.

    'Jumping out of the trash', is exactly how I would describe my issue. I can delete any file providing it is not an application. Just tested trashing a range of apps, third-party and pre-installed, all act in the way I describing, all 'jump' out of the trash. Also, apps that were present pre-SL install act in the same way as post-SL ones.
    I haven't to my knowledge dragged an icon from the dock to the trash, it doesn't sound like something I would do. I have in the past trashed an app directly from the Applications folder, in the usual drag-n-drop fashion. I have no other drives connected to my computer.
    Just checked the permissions on the account, it tells me I am the administrator. I have no parental controls set.
    I've checked ownership and permissions and whether the item is locked for my hard drive and my applications folder; and for applications I am attempting to trash, all seem to report that I have the 'power' to delete them.

Maybe you are looking for

  • How can I change my APP Store account?

    How can I change the account I am using on my app store? How do I retreive contacts that I lost when I changed my apple id on my iCloud?

  • Finance GL/ AR /AP extraction

    Hello Experts, I am a newb with respect to BI/BW extraction. Please read through and let me know if all the configuration is proper and is there any change required. I donot have access to SAP notes. I have referred to best practices, but for the GL

  • Midlet Running in the Emulator but not in the phone?

    Hi everybody, I have developped a Midlet using the Sun Wirelees Toolkit, the midlet reads results from a Servlet and print it on a TextBox. It works fine in the emulator but when I deployed it to Nokia 6600 it prints NULL. I really don�t know what�s

  • How to bind this?

    i have an array. i use objectarraydataprovider that uses my array.i want to use expression like page.oadpAddresses.options['addressKey.id,addressName']}. addressKey is an object and it has a property called id. i can use root properties of this array

  • HT4623 how to fix iphone could not connect missing pairing record

    how to fix iphone could not connect missing pairing record