Unable to Connect to VM Manager Console

Hello my server lost power this weekend and after the power was restored I booted up the Server that hosts the VM Manager application but I am unable to connect to the website. How do I start up the OVM Manager Web services?

Hi,
as root do this:
cd  /u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/bin
*./startWebLogic.sh*
Wait until weblogic server reach RUNNING state.
This is for Manager version 3, but you can also execute command:
service ovmm start
Regards.
Bagy

Similar Messages

  • Unable to connect to Enterprise Manager URL

    Hi!
    I am trying to connect to Enterprise Manager but I couldn't
    Listener is strated
    DB console service is running fine
    I am not able to connect to the Enterprise manager URL
    when I checked the cfgtoollogs\emca\<instance name>
    I had found this where could be the error.
    SEVERE: Unclosed group near index 15
    *^\s*(PORT\s*=.**
    *^*
    Mar 10, 2011 1:03:24 PM oracle.sysman.emcp.util.FileUtil setCommentPropsReplaceMarkers
    CONFIG: Stack Trace:
    java.util.regex.PatternSyntaxException: Unclosed group near index 15
    *^\s*(PORT\s*=.**
    *^*
    I will be thankful if u can provide me the solution
    Thank u
    Sri

    Hi mnazim,
    Thank you for your reply.
    I tried all the options earlier, still I am unable to connect to Enterprise Manager
    If u have any other suggestions you can help me with that.
    thank u
    Sri

  • ORA-29701: unable to connect to Cluster Manager

    Hi
    i am getting the following error message on RAC cluster / Linux , oracle when i connect as client..
    ORA-29701: unable to connect to Cluster Manager
    Plz help
    RP

    Any solution to this?
    This is happening to me on Red Hat ES 3. I can start the ASM instance fine after the system boots, but I can't get it to start automatically during boot.
    I'm guessing that the cluster management services aren't up yet during boot, but I can't seem to get the timing right in my rc.d setup. If I try a startup priority of 50, then I get the error. If I try a priority of 91, the instance does not even try to start (I'm not sure why).
    Should I put a loop in my ASM startup script, waiting for the services to become available? If so, what should that loop look for? Or, should I go into inittab, where init.ocssd is invoked, and somehow tell the boot process to wait until the services have started?

  • Error connecting 8i Enterprise Manager Console after installation

    Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
    After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
    I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
    Any help would be really appreciated!!

    Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
    After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
    I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
    Any help would be really appreciated!!

  • Can't connect to Enterprise Manager Console.

    Hi..
    I started the enterprise manager console via the command " @emctl start dbconsole "
    when i try to connect to the web browser based app running on port 1158
    (according to contents of install/portlist.ini ) I get the error
    You have chosen to open em which is a: application/octet-stream from http://localhost:1158/em.
    This happens on firefox. On IE i just get garbage.
    >>>>>
    c:\app\Ryden\product\11.1.0\db_1\bin>@emctl start dbconsole
    @emctl start dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
    Copyright (c) 1996, 2008 Oracle Corporation. All rights reserved.
    https://dell-laptop2:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 11g Database Control ...The requested service has already been started.
    >>>>>
    any suggestions much appreciated.
    thanks!
    chris
    Chris Bedford
    Founder & Lead Lackey
    Build Lackey Labs
    http://buildlackey.com

    Show us the output of
    emctl status dbconsoleMost of the times, EM stops with DGCP being enabled on the system after the db's creation. I faced alot of it just 2 days ago when 2 of my boxes stopped EM. So show us the output of the above command and to have an idea of basic EM troubleshooting, read this,
    http://oracle-base.com/articles/misc/BasicEnterpriseManagerTroubleshooting.php
    HTH
    Aman....

  • Error in connect to Enterprise manager console

    I am getting the following error message when trying to connect to oracle 9i Enterprise manager console with the following username and password: sysoper/oem_temp as sysoper AND sys/password as sysdba
    Error Message :ORA12532:TNS:Invalid arguement
    I installed oracle 9i in my home PC.
    Can any one Please Help me
    Thanks in Advance

    Hi all
    Are you trying to connect using stand alone? or using and OMS?
    I tried to connect using stand alone, i didnot change any system usernames and passwords (Defaults)
    Username: System
    password: Password
    service: orcl
    connect as : Normal
    I also tried to connect as
    username : Sys
    password: password
    as: sysdba
    Still getting the same Error
    THANKS ONIL

  • Unable to connect to catalog manager

    Hi,
    I am unable to connect catalog manager in OBIEE 10g.When I am clicking on the link to catalog manager a message is getting displayed.
    JVM terminated exit code=-1 and other details.
    Pls help me in resolving this one.
    Regards,
    Yaseen

    Hi,
    I think you have installed obiee 10g on a 64-bit computer and used 64-bit jdk. DO the below steps will resolve the issue
    You must use the 32-bit JDK for OBIEE, as it is a 32-bit application.
    1. Make sure that your PATH is pointing to 32-bit JDK:
    Click on the Start button.
    Right click on Computer
    Select Properties
    From the resulting Window, click on Advanced Settings
    In the resulting dialogue box, click on the Environment Variables button so that you can edit the path.
    Add the path for the 32-bit JDK as the first entry to the PATH Variable.
    2. Open a command Window prompt and change to the catalog manager directory:
    $OracleBi/web/catalogmanager
    3. Run the following command:
    java -jar startup.jar
    If you want to use a custom settings for Java Heap you may use the following command:
    java -jar startup.jar -Xmx800M -Xms400M
    Hope it helps.
    Thanks,
    RM

  • Unable to connect to Enterprise Manager

    Hello:
    I successfully installed 10g on my laptop. I was able to access the enterprise manager control panel without a problem. Today, I tried to access the control panel and I'm unable to connect. I'm receiving a Page Cannot Be Displayed screen.
    I'm running Windows XP. I don't understand why it worked once and not now.
    Can someone help me out? Thank you.

    Can you confirm that the service OracleDBConsoleSID is running? Any errors in the event log?

  • Unable to drop Oracle Enterprise Manager console in Oracle 11g

    Hello all,
    I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
    D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
    STARTED EMCA at Jun 16, 2009 9:59:58 PM
    EM Configuration Assistant, Version 11.1.0.7.0 Production
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Enter the following information:
    Database SID: NM45
    Listener port number: 1529
    Password for SYS user:
    Password for SYSMAN user:
    Password for SYSMAN user:
    Do you wish to continue? [yes(Y)/no(N)]: y
    Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
    al
    WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
    Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
    Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
    Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
    Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
    D:\Oracle\Ora11G\BIN>
    Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
    In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
    Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
    Thanks
    With Regards
    Hemant

    hem_kec wrote:
    Hello all,
    I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
    D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
    ORACLE_HOME/bin/emca -x <sid>
    ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
    Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
    Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see      278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
    In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
    Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
    Thanksok
    With Regards
    Hemantbest regards

  • Unable to connect Oracle Enterprise Manager 10g

    Good Morning All,
    I using oracle 10g.
    http://dt40562:1158/em/console/logon/logon
    iam connecting successfully in Toad using scott/tiger.
    Whenever im connecting using Oracle Enterprise Manager im getting below error
    "The application requires more database privileges than you have currently been granted. Click on Help to get more version specific information."
    Pls help me on this issue.. How can i connect to database using OEM.
    Thanks..

    Hi,
    CONNECT has been dramatically altered in 10.1.0.x and later releases of Oracle.  The granted privileges have been seriously reduced to nothing more than CREATE SESSION.  In 9.0.1.x and 9.2.0.x the CONNECT role possessed these additional privileges:
    ALTER SESSION
    CREATE CLUSTER
    CREATE DATABASE LINK
    CREATE SEQUENCE
    CREATE SYNONYM
    CREATE TABLE
    CREATE VIEW
    Thus an application which relied upon the CONNECT role in 9iR2 and earlier releases would not properly function against a 10gR1 or later database.
    you need to have these Oracle Roles , so ur problem will be solved.
    EXECUTE_CATALOG_ROLE
    OEM_MONITOR
    EXP_FULL_DATABASE
    Let me know if the issue still persists.

  • Unable to connect using Enterprise Manager

    I have Oracle 9.2 installed on w2000 server and it was working fine when I use isqlplus and sqlplus. However, after I type in the userID:SYS and password to expand the tree of the database when I use Enterprise Manager , it gives me the error ORA-12520. I got the same error when trying to create DSN in ODBC driver configuration.

    Solution:
    I ran into the same problem. You have to first create a password file. Run
    orapwd file=<fname> password=<password> entries=<users>
    The file will usually be in the dbs by default. You may have to play with the file name. I had to make it orapwd in dbs to make it recognize correctly.
    Next you need to modify your startup parameter for your instance to use the remote_login_passwordfile='shared' or 'exclusive'
    Set it to exclusive if you have only one instance or shared if you have multiple instances. I had to use the pfile and start the instance with that. Just rename your spfile and type 'sql>create pfile from spfile' and then edit it. Set your parameter and restart your instance. The do 'sql>create spfile from pfile' to make your spfile again. Now you should be able to connect as sys remotely from sql or OEM!!!
    Doc:
    Setting REMOTE_LOGIN_ PASSWORDFILE
    In addition to creating the password file, you must also set the initialization parameter REMOTE_LOGIN_PASSWORDFILE to the appropriate value. The values recognized are described as follows:
    Value Description
    NONE
    Setting this parameter to NONE causes Oracle to behave as if the password file does not exist. That is, no privileged connections are allowed over non-secure connections. NONE is the default value for this parameter.
    EXCLUSIVE
    An EXCLUSIVE password file can be used with only one database. Only an EXCLUSIVE file can contain the names of users other than SYS. Using an EXCLUSIVE password file allows you to grant SYSDBA and SYSOPER system privileges to individual users and have them connect as themselves.
    SHARED
    A SHARED password file can be used by multiple databases. However, the only user recognized by a SHARED password file is SYS. You cannot add users to a SHARED password file. All users needing SYSDBA or SYSOPER system privileges must connect using the same name, SYS, and password. This option is useful if you have a single DBA administering multiple databases.

  • I am unable to connect to subscription manager? Help?

    I have a subscription to Captivate 6 ... was working great this morning i tried to run, but got a message "Please connect to internet and retry"
    I have gone through the steps I found in the help section to no avail. I am on the internet, the clock is set right, I can connect to Adobe (secure and unsecure), the certificate is installed.
    I tried downloading CP6 again and installing, only to get to the same place ...
    I am working on a deliverable due today, any help please...
    -John

    maybe wait an hour or so.  there seems to be an unusually large number of connection problems.
    or, if you want to check for common problems causing that error message: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html

  • Unable to connect to Exchange 2010 Management console after - Exchange 2010 SP3 Rollup 7

    We have been having issue with our Exchange Server 2010's Transport Service failing due to a database corruption. I was hoping that maybe applying the Roll-up 7 for Exchange might fix this issue, however after applying the patch we are unable to start the
    MSExchangeMailboxAssistants "Error 1053: The service did not respond to the start or control request in a timely fashion."
    Then I notice that we were unable to connect to the Management Console or through PowerShell. 
    Event 1000, Application Error
    Faulting application name: MSExchangeMailboxAssistants.exe, version: 14.3.210.2, time stamp: 0x53e2bf34
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x5315a05a
    Exception code: 0xe0434f4d
    Fault offset: 0x000000000000940d
    Faulting process id: 0x%9
    Faulting application start time: 0x%10
    Faulting application path: %11
    Faulting module path: %12
    Report Id: %13
    PowerShell error:
    Exception calling "TryLoadExchangeTypes" with "2" argument(s): "Could not load file or assembly 'Microsoft.Exchange.Man
    agement, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name va
    lidation failed. (Exception from HRESULT: 0x8013141A)"
    At C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1:75 char:92
    + $typeLoadResult = [Microsoft.Exchange.Configuration.Tasks.TaskHelper]::TryLoadExchangeTypes <<<< ($ManagementPath, $t
    ypeListToCheck)
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : DotNetMethodException

    Hi,
    Please try the following steps to narrow down the issue:
    1. Uninstall and reinstall .NET package in Exchange server.
    2. Under location C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG, took a copy of Machine.Config.default, renam it to Machine.config and copy it under this path again.
    3. Do IIS reset by running iisreset from a Command Prompt window.
    4. Reboot the server and verify whether the Exchange services are started.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Urgently need help on setting up the ESM MANAGEMENT CONSOLE

    Gooday everyone,
    As i was trying to setup a demo ESM just to test out something before it goes into production server .
    and i always hit up into issue where everytime i will receive a message which is : Object reference not set to an instance of an object .
    after this message appear , i was unable to complete the ESM MANAGEMENT CONSOLE setup .
    moreover we have the NOVELL Edirectory server setup wizard , so i was using the we have no idea what was going on about it . Besides that , the login user name and password seems to be correct our system using are NOVELL ENDPOINT SECURITY 3.5 ( need to upgrade to 4.1IR in later after the 3.5 version are setup .. )
    is there any PRO will come to help ? we need this setup to run as usual ASAP :(any PRO can help will be much appreciated .
    thanks .
    from : NX ( a normal user start to use NOVELL ESM :( )

    nxgame,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Solaris 9, Solaris Management Console ISSUE

    Solaris 9, Solaris Management Console ISSUE
    I have Solaris 9 installed and I am unable to use the Solaris Management console.
    I have managed to start it:
    /etc/init.d/init.wbem start
    /etc/init.d/init.wbem status -> shows it's running
    But if I try browser with the link http:// host:898, I have got the following error:
    "A web version of the Solaris Management Console is not available at this time."
    any Idea why?

    Are you running Trusted Extensions? What patch cluster are you on? What toolbox are you opening?

Maybe you are looking for