Unable to connect to VM's in new cloud service via express route

We have changed our express route setup, initially we had an express route via London, but we have added a second one via Amsterdam and removed the one via London. All existing and new vm's in the different vnet's have connection to our local datacenter,
but as soon as we create vm's in a new cloud service the published routes don't seem to be picked up and the machine are only reachable in their local vnet on azure.
Does anyone have an idea where to look, it looks like the route publishing does not seem to work correctly, but it is strange that new vm's in existing cloud service do work correctly. BGP peering and vnet have been provided access via the expressroute and
all have status provisioned.

Hi Syed,
When I try to connect to a new vm via rdp or try to do a tracert to the machine (with firewall turned off on the vm) I don't get a response (traffic is routed via the express-route correctly). If I do a tracert to an ip on the on premise network
from the vm in question the trace is directed to internet instead of to the on premise network via the express route.
the new cloud services were created in the same region as the working cloud services and the vm's are also in the same vnet/subnet as the working vm's. If I delete a vm (keeping the disks) from a new cloud service and redeployed it in an existing cloud service
I can reach it again via the internal ip.
We have checked the route publishing and the correct routes are published to the express route/vnet.
When I check the provisioning of the vnet's via get-azurededicatedcircuitlink all the vnet's in question are listed as provisioned.
I'll try to remove the bpgrouting for the original expressroute this evening to see if that helps.
kind regards
Xander

Similar Messages

Unable to connect to server to accept new icloud terms and conditions

Unable to connect to server to accept new icloud terms and conditions

I have the same issue.
APPLE anyone to help a lot of buyers who spend a lot of money in your products ?????

Unable to connect to the database to product shared services

Hi
I got an error in configuring shared services with the Oracle server database
"" Unable to connect to the database to product shared services ""
I created a database that is working properly when accessed by a client.
I typed everything in config utility, Does we need to take care of any other servies?
I appreciate if any one help with this.
Thanks
Abel Junior
Version: Hyperion System 9 and Oracle 9i

John is of course correct that XP is not a supported environment for Essbase 9.3.x.
Having said that, I have successfully installed Shared Services, Essbase, and EAS on multiple XP laptops. I have done so with 9.2 (painful) and 9.3.1 (just about painless) although always against SQL Server. This is strictly for development/kick the tires work, never as a production environment.
Planning has quite an issue with XP (and Vista) although I have heard that there is a Windows Registry fix for this.
Of course Oracle support is going to gong you if you call up with questions about your laptop -- it isn't supported.
One last thing -- Shared Services and laptop suspends =! stability. For my development purposes, I have backed off Shared Serivces and just go with Essbase as a service with native security and EAS.
Regards,
Cameron Lackpour
P.S. VMs are probably the way to go if your desktop/laptop has the horsepower to drive a proper OS with the VM overhead. On a 4 gigabyte laptop with a Duo Core (no, not a Mac, I just can't remember what Intel calls it -- the power of marketing) VMServer running Windows Server 2003 and the full stack is pretty slow, but it works.

How do I connect two VMs in the same cloud service?

I want to setup a DB cluster with two VMs in a single cloud service. My DB (Couchbase) requires being able to reference the other nodes by IP address or hostname. Since VMs change their IP everytime they restart I can't use that, and as far as I can tell
hostname is the same for both VMs in a cloud service. But the Azure docs mention Azure provided name resolution (here https://msdn.microsoft.com/en-us/library/azure/jj156088.aspx). I can't find any information on how this service works, or how I find the permanent
hostnames it assigns to my VMs within a cloud service. Is there anyway to find one VM from another within a cloud service that persists across restarts?

Hi CanuckAlex;
Thank you for your post.
Virtual machines must be in a cloud service, which acts as a container and provides a unique public DNS name, a public IP address, and a set of endpoints to access the virtual machine over the Internet. The cloud service can optionally be in a virtual network.
If a cloud service is not in a virtual network, the virtual machines in that cloud service can only communicate with other virtual machines through the use of the other virtual machines’ public DNS names, and that traffic would travel over the Internet.
If a cloud service is in a virtual network, the virtual machines in that cloud service can communicate with all other virtual machines in the virtual network without sending any traffic over the Internet.
If you place your virtual machines in the same standalone cloud service, you can take advantage of load balancing and availability sets. For details, see
Load balancing virtual machines and
Manage the availability of virtual machines. However, you cannot organize the virtual machines on subnets or connect a standalone cloud service to your on-premises network. Here is an example.
If you place your virtual machines in a virtual network, you can decide how many cloud services you want to use to take advantage of load balancing and availability sets. Additionally, you can organize the virtual machines on subnets in the same way as your
on-premises network and connect the virtual network to your on-premises network. Here is an example.
Virtual networks are the recommended way to connect virtual machines in Azure. The best practice is to configure each tier of your application in a separate cloud service. This enables advanced user rights delegation through Role Based Access Control (RBAC).
For more information, see
Role Based Access Control in Azure Preview Portal. However, you may need to combine some virtual machines from different application tiers into the same cloud service to remain within the maximum of 200 cloud services per subscription.
To connect virtual machines in a virtual network:
Create the virtual network in the Azure Management Portal. For more information, see
Virtual Network Configuration Tasks.
Create the set of cloud services for your deployment in the Azure Management Portal to reflect your design for availability sets and load balancing with
New > Compute > Cloud Service > Custom Create.
When you create each new virtual machine, specify the correct cloud service and your virtual network. If the cloud service has been previously associated with your virtual network, its name will already be selected for you.
Here is an example using the Azure Management Portal.
To connect virtual machines in a standalone cloud service:
Create the cloud service for your deployment in the Azure Management Portal with
New > Compute > Cloud Service > Custom Create.
When you create the virtual machine, specify the name of cloud service created in step 1. Alternately, you can create the cloud service for your deployment when you create your first virtual machine.
Here is an example using the Azure Management Portal for the existing cloud service named EndpointTest.
PS: One can assign static IP address to VM on Azure, You could refer to this
link here.
Hope this helps.
Warm Regards;
Prasant

Problem in creating new cloud service

I have tried almost all possible combination of letters to specify URL for creating new cloud service and I am getting an error saying "This specified URL is already in use". Any help would be greatly appreciated. Thank you in advance.
Regards,
StarMogu

Hi,
What combination of letters did you try? Base on my experience, some word is in blacklist and didn't used in cloud service name. Please see this same threads(
http://social.msdn.microsoft.com/Forums/en-US/963acdd1-ee05-406b-978e-20528c7722ee/seriously-get-rid-of-the-url-name-blocking ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to connect to Planning URL after new instal & configuration 11.1.2

I have installed 11.1.2 on Windows 64 bit environment and configured.
Here is my environment:
Box 1. FS, Essbase, Weblogic, Oracle HTTP. Configured successfully and working great no issues (I have not configured web server in FS yet)
Box 2. Planning. Installation and configuration was successful.
Issue: however unable to connect to URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I am not expecting 19000 will connect)
Trobleshooting:
Upon running netstat, 8300 is not running on this box.
Also configured "Manage Planning Cluster" with no luck.
Weblogic (11g) server indicated planning state is unknown.
Diagnostic indicates: 1. system-jazn-data.xml file does not exist 2. web app for planning failed due to Error: java.net.ConnectException: Connection refused: connect
I have stopped and restarted Planning app service several time runs without any issue but unable to connect to URL and no port is running.
Planning log does not reveal any error messages.
EPM system log indicates ServletContainerAdapter manager not initialized correctly
There is no error in start-HyS9Planning-out.log.
start-HyS9Planning-error.log indicates The requested service has already been started.
There is an error in validation log:
[2010-10-06T10:18:23.171-04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle.EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU^MG1Cf8KW00000E,0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] Error checking response code: [[
java.lang.Exception: java.net.ConnectException: Connection refused: connect
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
     at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
     at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
     at org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
     at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
     at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
     at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
     at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
     at com.hyperion.cis.validation.RunningEnviroment.access$000(RunningEnviroment.java:40)
     at com.hyperion.cis.validation.RunningEnviroment$1.run(RunningEnviroment.java:132)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
     at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
     at sun.net.www.http.HttpClient.New(HttpClient.java:306)
     at sun.net.www.http.HttpClient.New(HttpClient.java:323)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:852)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:793)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:718)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
     ... 21 more
What am I not doing?
Thanks for your help in advance!
Edited by: VenuRamini on Oct 6, 2010 7:25 AM
Edited by: VenuRamini on Oct 6, 2010 7:35 AM

John, thanks for quick response!
I have restarted Planning and looked at the log file.
HyS9Planning-sysout.log indicated
<Oct 6, 2010 11:58:59 AM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xxxxxxxxxxxxxxx= from the file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Prior to this after reading epm_1112000_readme.pdf file on page 9 (issue 9180347, 8841004) there is known issue of not copying the file to destination location. Followed instruction and that did indicate that userid and pwd was not encrypted.
Here is the log when I change boot.properities files base on known issue stated above:
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 6, 2010 12:34:56 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
HyS9Planning-syserr.log has no info.
Edited by: VenuRamini on Oct 6, 2010 9:51 AM

Unable to connect to network with a new Laptop. ( WRT160n v3.0.02/3 and WRT54G2 v1.0.01)

Hello,
I have never had problems with a Linksys router before until I recently got a new laptop. It was fine for the first few days, but then the connection started dropping and wouldn't come back unless I turned off the router and back on. This started increasing in frequency, so I decided to tweak with my router to find the problem and see if I could solve it.
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away. I decided to do a factory reset and set up the network all over to see if this would fix it. Nothing.
I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. (...again)
Fed up, I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
I've tried setting a static IP, I set my priority to highest on QoS, I've tried factory resetting both routers TWICE. I'm at my wits' end and I dunno what else to try, I'd greatly appreciate any help I can get.
I have a cable connection, modem works just fine, signal is fine if I connect it directly to modem, also if I connect it through the router, no problems whatsoever, the only problem seems to be the wireless on my new device. OTL

Hi roseyrosho,
You may try this link below on how to determine the correct MTU (Maximum Transmission Unit) size. I hope this will help.
Determining and setting up the correct MTU size

New router unable to connect wirelessly to C4380 that had printed wirelessly with prior router.

My Verizon router was replaced. Have not been able to re-establish the wireless printing connection with C4380(DED3F7). Frustrated! BBlaine

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT4623 Why aM i UNABLE TO CONNECT TO at&t TO ORDER CELL SERVICE?

Please advise how I can connect to AT& T to order cellular service?

Ask AT&T. No one here can answer that question.
Barry

Unable to connect to SAP business one through web service

Hi
I'm facing some problem with my web service. I tried to connect to SAP but it gave me an "System.Exception"
Public Function ConnectedToDatabase() As Boolean
Try
Dim oCompany as SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
sErrMsg = ""
Session("g_server") = System.Configuration.ConfigurationManager.AppSettings("Server")
Session("g_companyDB") = System.Configuration.ConfigurationManager.AppSettings("CompanyDB")
Session("g_DBUserName") = System.Configuration.ConfigurationManager.AppSettings("DbUsername")
Session("g_DBPassword") = System.Configuration.ConfigurationManager.AppSettings("DbPassword")
Session("g_Username") = System.Configuration.ConfigurationManager.AppSettings("Username")
Session("g_Password") = System.Configuration.ConfigurationManager.AppSettings("Password")
oCompany.Server = Session("g_server")
oCompany.CompanyDB = Session("g_companyDB")
oCompany.DbUserName = Session("g_DBUSerName")
oCompany.DbPassword = Session("g_DBPassword")
oCompany.UserName = Session("g_Username")
oCompany.Password = Session("g_Password")
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
lRetCode = oCompany.Connect()
When the codes runs to the line IRetCode = oCompany.Connect(), it will return an error code -8006. Those session got the correct information from the web.config. Then exception is throw in.
I try restarting my com and restarting my suite manager. Usually this will solve the problem. However, it won't for this time. I hope will receive some solutions for my problem. Thanks for your time.

Hi,
Try To Set the db server type to MS SQL 2005 (value 4)
oCompany.DbServerType = BoDataServerTypes.dst_MSSQL2005
or
oCompany.DbServerType = 4
and
oCompany.UseTrusted = False
Regards,
János

I have a new internet service provider and router and need to re-connect to my airport express. However, Airport Express is not showing up. Also, when I launch Airport utility (new and 5.6), it shows no available devices. What am I doing wrong?

iMac (2008), 10.7.5
Airport Express (2008)
Comcast wifi router

The AirPort Express must be reset back to factory default settings first, and then reconfigured again.
To reset the AirPort......
Power off the device
Wait a minute
Hold in the reset button first, then continue to hold the reset button in for an additional 10 seconds while you simultaneously plug the AirPort back into power
Release the reset button after the hold period and allow a full minute for the AirPort to restart
Try using AirPort Utility 5.6 now to see if it will "see" the AirPort so that it can be set up again.
If you are using AirPort Utility 6.x, you must first click on the Other WiFi Devices tab, then click on AirPort Express to start the setup wizard

Creating a new database service via Oradim command

Hi all,
I have seen a couple of threads on the above and usually confirmed by user (who asked it) that the issue has been resolved. Anyway, i am in the same situation. I have tried to execute the following command but have received the usual error (given below):
C:\Users\XYZ>oradim -new -sid test -syspwd password -startmode auto -pfile D:\oracle\product\10.2.0\admin\orcl\pfile\init.ora
OPW-00001: Unable to open password-file
DIM-00014: Cannot open the Windows NT Service Control Manager.
O/S-Error: (OS 5) Access is denied.
Additionally I have run this command on the Windows 7 Ultimate edition O.S and have removed all restrictions on pfile folder in order to allow it to be used by any user.
please help!
Thanks and Cheers!

Is this what you want?
SetWith following output:
===============================
C:\Users\XYZ>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\XYZ\AppData\Roaming
CLASSPATH=.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=XYZ-PC
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\XYZ
LOCALAPPDATA=C:\Users\XYZ\AppData\Local
LOGONSERVER=\\XYZ-PC
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\oracle\product\10.2.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\QuickTime\QTSystem\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PERL5LIB=D:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;D:\oracle\product\10.2.0\db_1\perl\5.8.3\lib;D:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;D:\oracle\pr
oduct\10.2.0\db_1\perl\site\5.8.3;D:\oracle\product\10.2.0\db_1\perl\site\5.8.3\lib;D:\oracle\product\10.2.0\db_1\sysman\admin\scripts;D:\oracle\product\10.2.0\db_1\perl\lib\5.8.3\
MSWin32-x86;D:\oracle\product\10.2.0\db_1\perl\lib\5.8.3;D:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86-multi-thread;D:\oracle\product\10.2.0\db_1\perl\site\5.8.3;D:\orac
le\product\10.2.0\db_1\perl\site\5.8.3\lib;D:\oracle\product\10.2.0\db_1\sysman\admin\scripts
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=1706
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
QTJAVA=C:\Program Files\QuickTime\QTSystem\QTJava.zip
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\XYZ\AppData\Local\Temp
TMP=C:\Users\XYZ\AppData\Local\Temp
USERDOMAIN=XYZ-PC
USERNAME=XYZ
USERPROFILE=C:\Users\XYZ
windir=C:\Windows
====================------------------------

Unable to enable diagnostics for a WorkerRole on Cloud Services

Hi,
I have problems with deployment of a package to Azure CloudServices, it contains one Worker Role, that is the log which I'm getting when I deploy it with diagnostics enabled:
6:05:29 PM - Applying Diagnostics extension.
6:05:50 PM - Preparing deployment for [...] - 2/9/2015 6:05:27 PM with Subscription ID '[...]' using Service Management URL 'https://management.core.windows.net/'...
6:05:50 PM - Connecting...
6:05:50 PM - Verifying storage account '[...]'...
6:05:51 PM - Uploading Package...
6:05:57 PM - Creating...
6:06:30 PM - Created Deployment ID: [...].
6:06:30 PM - Instance 0 of role WorkerRole is stopped
6:06:30 PM - Starting...
6:06:46 PM - Initializing...
6:06:46 PM - Instance 0 of role WorkerRole is creating the virtual machine
6:07:49 PM - Instance 0 of role WorkerRole is starting the virtual machine
6:09:22 PM - Instance 0 of role WorkerRole is in an unknown state
6:10:23 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:10:04Z]
6:10:54 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:10:04Z]
6:11:24 PM - Instance 0 of role WorkerRole is restarting
Details: Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:11:01Z]
6:13:27 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:13:05Z]
6:15:30 PM - Instance 0 of role WorkerRole is busy
Details: Recovering role... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:15:09Z]
6:17:33 PM - Instance 0 of role WorkerRole is restarting
Details: Role has encountered an error and has stopped. Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:17:16Z]
6:19:35 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:19:25Z]
6:21:38 PM - Instance 0 of role WorkerRole is busy
Details: Waiting for role to start... Unhandled Exception: System.IO.FileLoadException [2015-02-09T23:21:29Z]
What could be the reason for this failure? Are there ways to get more precise information about those exceptions?

Hi ,
How did you enable this feature in your project? I recommend you could refer to this documents:
https://msdn.microsoft.com/en-us/library/azure/dn482131.aspx
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to login from IE to Azure hosted cloud service

Hi
We have hosted cloud service on azure and not able to login with the existing users in it.
While if we add SSL to the same service we can able to login to the site.
Will you please let us know what is the issue cause? Is azure restrict to login?
Do we need to add some code changes for the IE login?
We have faces same problem on our local server but have resolved by installing patch from microsoft link "http://www.microsoft.com/en-in/download/details.aspx?id=39257"
So please help us.
Thanks,
Rohit Jagtap.

Hi,
As you said, you have face the same problem on local server, so I think this issue is more related to your application, as far as I know, it is nothing to do with azure.
To resolve this issue, I think the detail error message is necessary, I suggest you use diagnostics to log errors, refer to
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-dotnet-diagnostics/ for more details, or use remote debug to find issue, see more at:
http://blogs.msdn.com/b/cie/archive/2014/01/24/windows-azure-remote-debugging.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS1424 Whenever I try to update an app or download a new one I get an error message stating "unable to connect to iTunes"....I have reset my iPad and router but still get the error message

Whenever I try to update any apps or download a new one I get the following error message "unable to connect to iTunes". I have reset my iPad and router and also done the same with my iPod but get the same issue.....need some support please?

There are a number of threads from other people reporting the same iTunes connection issue, it looks like there might be a problem at Apple's end - but you could try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works, but it probably won't until Apple's fixed it

Unable to connect to VM's in new cloud service via express route

Similar Messages

Maybe you are looking for