Unable to connect to windows server using VMware after AppleSoftwareUpdate

Hallo,
we are using a Mac OS X Server 10.5.7 server to host our new business application's database. However, all the old data was stored on an old Windows NT 4.0 server using an Oracle database. We still have to access the old data using our former business application for backward compatibility on a regular basis. Because we were unable to move the data over we decided to create a virtual machine. Everything was fine and the VMware Fusion trial worked great. So we decided to buy your software. At the same time we have installed a few Apple updates (AirPort-Utiliy 2009-002, iLife-Support 9.0.3, Safari 4.0 and QuickTime 7.62) on the server. When we tried to run the business application on our clients - Windows 98 (they're accessing a shared folder containing the EXE mounted as a network drive) the applications just crashed after entering the username and password: "application caused an invalid page fault in module ..."
Is there any possibility of an incompatibility connected with the installed Apple updates ?

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

Similar Messages

Oracle9iAS(9.0.2.0.1) Can't connect X11 Window Server Using localhost:0.0

Hi, everyone:
I have installed the Oracle9iAS(9.0.2.0.1), at the first time installation, every thing is succeed in Miracle Linux 2.0, but after i reboot linux pc, then
#$ORACLE_HOME/bin/emctl start is also succeed,
unfortunately after i connect to that pc by 1810 port,
it display a web page with the message of
Servlet error: Renderer failed:
java.lang.NoClassDefFoundError can't connect X11 window
server using 'localhost:0.0' as the value of the DISPLAY
variable
why, and how to solve this problem, thanks in advanced

Check out the support matrix for deploying to different versions of OracleAS.
http://otn.oracle.com/products/jdev/htdocs/9.0.5.1/install.html#supported
Following how-to has an FAQ which has details about invalid servlet path error.
http://otn.oracle.com/products/jdev/howtos/appservers/deployias.html#faq
raghu
JDev Team

Unable to connect to Windows machine using RDC

I am trying to connect to a Windows server using Microsoft RDC on 10.4.11. My settings work fine for my 2013 iMac and 2009 Macbook Pro, with both RDC and Cord. I get the following messages in console (wondering if there is anything I can do to make this work in 10.4):
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
ERROR: send: Invalid argument
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
2013-08-22 12:43:16.672 SyndicationAgent[22633] WARNING: Feed connection for CNET News RSSFeed failed: NSError "lost network connection" Domain=NSURLErrorDomain Code=-1005 UserInfo={
   NSErrorFailingURLKey = http://news.com.com/2547-1_3-0-5.xml;
   NSErrorFailingURLStringKey = "http://news.com.com/2547-1_3-0-5.xml";
   NSLocalizedDescription = "lost network connection";
Thanks for the help.

Hmmm, why news.com.com?
I doubt it'll help with the Certificate, but might try CoVNC...
http://sourceforge.net/projects/cotvnc/

Upgraded to Yosemite - can't connect to windows Server using afp

I have upgraded to Yosemite from 10.6.8 Snow Leopard and now cannot connect to a windows merit used to connect to before. I previously used the afp protocol.
I get the message "The version server you are trying to connect to is not supported".
Is afp still supported with yosemite?
Do i need them to upgrade the server software?
It connects using smb, but does not display the same folders.
Thanks in advance, am a bit lost here

I am providing mac support for a group of mac users who make up the art department in a larger multinational company. As is often usual in these situations the larger PC IT department are incredibly unhelpful.
But I have just come online and had no part in the set up. The servers are overseas and managed by them. I have no idea why the used afp as the protocol. I just know it has worked this way for years.
The macs need to upgrade to go on to creative cloud.
I think he way forward is for them to change the access on the server to allow access using smb.
It is just difficult to deal with them because they aren't here tend to say "we dont support macs" when I contact them.

Unable to connect to sql server 2008 r2 after upgrading from framework 4.0 to 4.5.2 in windows 7 environment

Hi All,
BackGround
I used to connect to database with Encrypt set true in sql connection which helps established encrypted data base connection . I verified that created certificate in order
to provide Encrypted connection to database for client is valid.
Issue :Issue
is un-able to connect to sql sever2008 r2 from vs2013 by enforcing encryption to true.
while trying to test the connection from vs2013 error log getting recorded as well as error notification is getting populated as below .
Step1 :
from Vs2013 trying to connect to sql server 2008 r2
step 2: on Click test Connection . getting below mentioned error notification
Event Viewer Log:<o:p></o:p>
<o:p></o:p>
(Process Id: 7472)
<o:p></o:p>
.Net SqlClient Data Provider:<o:p></o:p>
A connection was successfully established with the server, but then an error
occurred during the login process. (provider: SSL Provider, error: 0 - The
target principal name is incorrect.)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception,
Boolean breakConnection, Action`1 wrapCloseInAction)<o:p></o:p>
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)<o:p></o:p>
   at
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle,
SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean
callerHasConnectionLock)<o:p></o:p>
   at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean
canAccumulate)<o:p></o:p>
   at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte
flushMode, Boolean canAccumulate)<o:p></o:p>
   at System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec,
FeatureExtension requestedFeatures, SessionData recoverySessionData)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential
credential, TimeoutTimer timeout)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential,
String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance)<o:p></o:p>
   at
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, SqlCredential credential,
Object providerInfo, String newPassword, SecureString newSecurePassword,
Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions,
SessionData reconnectSessionData)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo,
DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions
userOptions)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool
pool, DbConnection owningObject, DbConnectionOptions options,
DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate,
Boolean onlyOneCheckConnection, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection
owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection)<o:p></o:p>
   at
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1
retry, DbConnectionOptions userOptions)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)<o:p></o:p>
   at
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)<o:p></o:p>
   at System.Data.SqlClient.SqlConnection.Open()<o:p></o:p>
Inner Exception:<o:p></o:p>
:<o:p></o:p>
The target principal name is incorrect

The target principal name is incorrect
Hi Rahul.U,
Are you able to connect to SQL Server successfully from SQL Server Management Studio (SSMS) when enforcing encryption?
According to above error message, it could be caused by the inappropriate server name or incorrect TrustServerCertificate configuration in the connection string from Visual Studio. There are some proposals for you troubleshooting this error.
1. Make sure that you connect to the SQL server using the fully qualified domain name (FQDN).
2. When connecting to a SQL Server instance with a valid certificate, please add the
TrustServerCertificate
parameter and set it to true in the connection string. For more details, please review this
article.
However, if you can successfully connect to SQL Server via SSMS, but still fail to connect to SQL Server from Visual Studio, I would like to recommend you post the question in the .Net Framework forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=netdevelopment . It is appropriate and more experts will assist you.
There are similar articles about error “The target principal name is incorrect” for your reference.
http://serverfault.com/questions/458935/aws-rds-sql-server-ssl-connection-the-target-principal-name-is-incorrect
http://www.derekseaman.com/2013/09/sql-2012-failover-cluster-pt-12-kerberos-n.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Connection to windows server sometimes fails after standby

Hello,
I am using a Macbook Pro with 10.5.5.
Connections to Windows file servers works well. But sometimes after resuming from standby the it is not possible to connect. The "Connect to..." hangs and in the konsole i see:
23.11.08 11:37:34 com.apple.launchd[90] (com.apple.netauth.useragent[3770]) Exited abnormally: Segmentation fault
After rebooting the mac it works again.
Does anybody know how to solve this?
Thanks in advance
Alex

Hello nobody loopback,
The following is unrelated to this post, however it is the only way I know to contact you.
I found this page
http://discussions.apple.com/thread.jspa?threadID=1218394&start=60&tstart=0
I have a nearly identical situation where a backed up my entire "Macintosh HD" to a compressed DMG image file. During the restore process on the Leopard Install DVD it froze and I had to force restart. Upon restarting, I found my internal HD with only an Applications folder filled alphabetically with 73 and a half apps ending with a half restored iDVD.app and worst of all my single copy DMG (I know, foolish) reporting a "No mountable file systems" error. Due to the highly proprietary and closed nature of Disk Utility DMG images, I have chosen to contact you directly for help as the Apple Reps turn me to 3rd party data recovery and Data Recovery companies claim they don't do file repair. I feel someone with a wealth of knowledge concerning the DMG file format is my only option.
I was wondering if you could help me out.
So what do you say?
Here is the thread I posted for my case.
http://discussions.apple.com/thread.jspa?threadID=1699574&tstart=0
thank you for your time,
Marcus Schieffert
marcus3k AT gmail

Problem connecting to Windows Server using RDC with RDP SSL on PowerPC Mac

At work we use Windows Terminal Server 2003. We have multiple Macs connecting remotely using Microsoft Remote Desktop Connection 2.0. We recently changed settings to require SSL security on all remote connections. Everything works fine with Intel based Macs, but no PowerPC based Mac has been able to connect since enabling SSL. The error message states "you have been disconnected from the Windows-based computer because there were problems during the licensing protocol."
In the Administrative tools of the Terminal Services Configuration on the server, the Security Layer is set to SSL. If we change the security layer back to RDP Security Layer, the PowerPC based Macs can connect without a problem. The Encryption Level settings seems to have no effect on the connection.
Does anyone have experience with this problem or know of a solution?
Thanks in advance!
David

You may want to post over in the Microsoft forums for their Mac version of RDC: http://www.officeformac.com/productforums

Unable to connect to Windows Server SBS 2011

I connect to a Windows network. We recently upgraded to a Windows Small Business Server 2011 server from a Windows SBS 2003. Previously I had been able to connect and view all files. I am no longer able to. I can see the server, but whenever I try to log in, it says that I have the wrong name or password. I have tried many different combinations of the domain as per my network admin. How can I connect? Is there something different I have to do. Please help me as my boss will force me to use a pc if I cant connect.
Thanks

In 10.4, open Directory Access in Utilities, check the Domain, & SMB/CIS settings.

OD users unable to connect to a server via afp

We have a Mac OS 10.9.2 with Server 3.1.2. We are able to access the server for file sharing via smb with OD accounts just fine. But we are unable to connect to the server using afp with any OD account, only local system accounts. I have tried turning off SMB for all of the file shares, but this did not help resolve the issue.
The log shows a login attempt immediately followed by a logout.
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Login -----" -5023 0 0
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Logout -----" -5023 0 0
I did edit out the user and the server name.
Any help would be greatly appreciated.
Thank you.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

Can't connect to X11 window server using 'localhost:0.0 help please

Hi all,
I am new to oracle, and its my first time to install oralce 9i to our hp ux version 11.23 remotely(ssh), and i got this error messages,
$ ./runInstaller
$ Initializing Java Virtual Machine from /data/OraInstall2008-06-17_05-21-49PM/jre/bin/java. Please wait...
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'md2:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:63)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Window.<init>(Window.java:188)
at java.awt.Frame.<init>(Frame.java:315)
at java.awt.Frame.<init>(Frame.java:262)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
$ xhost +
xhost: unable to open display "md2:0.0"
$ export DISPLAY=127.0.0.1:0.0
$ xhost +
xhost: unable to open display "127.0.0.1:0.0"
$ export DISPLAY=:0
$ xhost +
xhost: unable to open display ":0"
I already followed all the suggestion from the forum, like in
Can't connect to X11 window server using '127.0.0.1:0.0'
but still got the same error, someone please help ?? please...

Can't connect to X11 window server using 'md2:0.0' asWell... Is there a X display server running? (on the hp-ux, if named md2)
As suggested, you may need to talk to a sys admin / unix guy or girl.

Can't connect to X11 window server using '127.0.0.1:0.0'

Oracle 9i R2 on Redhat Fedora Core 2
In the terminal on Xwindow enviroment
# xhost +
# su - oracle
$ export DISPLAY=127.0.0.1:0.0
$./runInstaller
It display error messege below
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
Why can't connect to X11 window server? Can you tell me how to solve that problem? Thanks

hello
I am trying to install Oracle 10g in Sun Solaris 10 all the while I ahve the following error. Please help to install oracle in sun solaris environment.
I have tried all the step of installation
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10 Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-08-07_10-51-43AM. Please wait ...$ Oracle Universal Installer, Version 10.1.0.3.0 Production
Copyright (C) 1999, 2004, Oracle. All rights reserved.
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Can't connect to X11 window server using ':0' as the value of the DISPLAY variable.
:0
:0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 basedprogram that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': ''

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

[Servlet Error]-[Can't connect to X11 window server using ':0.0&#39

i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
     at java.lang.Class.forName1(Native Method)
     at java.lang.Class.forName(Class.java(Compiled Code))
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
     at java.awt.Font.initializeFont(Font.java:333)
     at java.awt.Font.<init>(Font.java:368)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
Please tell me wht exactly i have to do, i men exactly its very urgent

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.(Font.java:298)
     at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

Unable to connect to windows server using VMware after AppleSoftwareUpdate

Similar Messages

Maybe you are looking for